Professional Documents
Culture Documents
Craybond 3022-TDS
Craybond 3022-TDS
CRAYBOND 3022
Product Description:
Craybond 3022 is part of the Solfre range of polyurethane adhesives meeting the exacting industrial standards in a new climate of
environmental awareness. The extensive number of products within the Solfre range have been designed utilising Chemique’s
knowledge of application techniques offering customers the total package of adhesive technology
Appication
In today’s industry the strong demands of product quality and performance are coupled with the need for versatility. Craybond 3022 offers excep-
tional levels of adhesion to a wide variety of substrates. The ‘open time’ Craybond 3022 exhibits enables laminates to be positioned accurately while
the adhesive is still wet so ensuring full adhesive transfer to the substrate giving a total permanent bond once fully cured. These properties coupled
with the advantages associated with beading polyurethane adhesives from Chemique offers the panel industry a new and exciting solution to
environmental and capacity problems
Technical Data
Chemical Base Polyurethane
Solvents None
Chemical Resistance Resistant to water, dilute acids, alkalis and aliphatic oils.
Cure Rate (sprayed with 7 – 10% water mist) See chart below
Application Data
Packaging Storage Temperature
1150 Kg intermediate bulk containers Between 10°C and 25°C. Lower temperatures can
Coverage
Between 3 and 12 m²/kg depending on the porosity and uniformity of the substrates being bonded. Only one substrate requires coating with
Craybond 3022
Substrate Preparation
All surfaces should be free of contamination by dust, grease, oils or release agents. Substrates should be checked for contamination by mould
release or cutting agents. Metals should be degreased prior to bonding. Cleaning solutions, if used, must be allowed to evaporate before application
of the adhesive. Some metals (untreated aluminium and galvanised steel) may require priming to achieve a satisfactory permanent bond.
Application
Focus Industries have developed a complete system for accurately and reliably spraying the Solfre range of adhesives. Alternatively we have the
experience and technology to adapt existing conventional equipment to apply such products as the customer requires.
www.focusindustries.net
PRODUCT DATA SHEET
Cleaning Solvent
Axil 703 or Axil 704 on uncured material
Dilution Solvent
Solfre 3022 is supplied ready for use.
TEMPERATURE (°c) OPEN TIME (MINS.) PRESS TIME (MINS.) TOTAL CURE TIME (MINS.)
10 20 40 60
12 18 36 54
14 16 31 47
16 14 28 42
18 12 24 36
20 10 20 30
22 9 18 27
24 8 16 24
26 7 14 21
28 6 12 18
30 5 10 15
www.focusindustries.net