Warp Protector Motion:
To protect the warp yarn / reed / shuttle
in case of trapping the shuttle in the
shed is the function of warp protector
motion. The shuttle failure or the shuttle
trap inside the warp shed may cause
many broken ends during the forward
movement of the sley. In order to
prevent this from occurring a device is
necessary to stop the loom whenever the
shuttle fails to reach the shuttle box.Types of Warps Protector
Motion:
Warp protector motions protect the
warp yarn in the event of shuttle trap
which may be due to over picking. The
mechanism will prevent mass
breakages. If the shuttle or gripper
projectile, flying through the warp, were
retarded or otherwise failed to arrive in
the reversing box in time, it would be
caught and braked by the closing shed.
During the subsequent movement of the
reed toward the beat -up position, the
warp ends would break; the reed, but
also the shuttle or gripper projectile and
possibly the temples, would be damaged.
The damage caused by it is extremely
laborious, time consuming, and costly to
repair.To eliminate the risk, the weaving
machines are provided with warp and
reed protector motion, which stops the
machines in time.
The design of the warp protector motion
must meet strict requirements:
1. The stop motion must be absolutely
reliable because any failure in
operation would result in a heavy
breakdown of the weaving
machine.
2. The stop motion must interlock the
machine start as long as the trouble
is not removed.
3. While withstanding high stresses,
the stop motion must have small
dimensions and allow weight.The warp protector motions, used at
present, can be divided into two groups:
1. The stop motions with mechanical
sensors, designed for a mechanical
signal transmission on the weaving
machines equipped with a
mechanical clutch and brake system,
or for an electrical signal
transmission on the weaving
machines equipped with an
electromagnetic clutch and brake
system.
2. The contactless stop motions
operating on either a photoelectric,
capacitance, or induction principleWarp protector are three types:
A. Loose reed warp protector motion
B. Fast reed warp protector motion
C. Electromagnetic warp protector
motion
Now, we discuss above warp protector
motion.