Professional Documents
Culture Documents
P.S. I only have an Ender-3 Pro, but the “common parts” on Ender-3 and Ender-3
Pro V2 should be pretty similar. Comment below if I got some parts wrong, and if
you want to contribute to the list.
Ração Premier Raças Ração Golden Special
RECENT POSTS
Standard v-slot aluminum profile. These are easily available everywhere on the
x
Internet and in hardware stores, very affordable too. The Ender-3 uses a mix-and-
match of various sizes:
2020 aluminum extrusion (20mm X 20mm) 12 Free Email Services (Without
2040 aluminum extrusion (20mm X 40mm)
Phone Verification)
4040 aluminum extrusion (40mm X 40mm)
Cosplay Games Anime Events In
On my Ender 3 Pro, the exact part sizes are: Singapore 2023
(With Pictures)
1 X 4040, 250mm
7 Types Of Computer Fans (With
backward)
Take note – the older Ender 3 uses 2040 instead.
report this a
Since these are industry-standard aluminum profiles – All standard aluminum profile
connectors and braces will fit.
FOLLOW US
P.S. The Ender-3 profiles are pre-cut to various lengths and have pre-drilled screw
holes. So unless you have the means to cut and drill the profiles yourself, YouTube
replacements are not recommended.
Pinterest
P.P.S. There is another type called the t-slot aluminum profile. They look similar, but
the difference is in the center groove – Read this beginner’s guide if you want to
learn more.
SCREWS
report this ad
Ripping this straight from the Ender-3 assembly manual, mostly standard M4 and
ABOUT ME
M5 hexagonal screws.
M5 T-Nut
M5 X 8
M5 X 25
M5 X 45 x
M4 X 16
M4 X 18-P
M4 X 20
T8 screw rod, 400mm length… But technically, we can extend this to as high as we
want.
SHAFT COUPLER
This is the “thing” that holds up the z-axis rod. Standard T8 lead screw, D20 5 x 8 x
25mm.
STEPPER MOTORS
x
Sponsored Content
Standard NEMA 17 stepper motors. Noisy buggers, but at least they are easy to find
Óculos De Proteção Para Aparelhos Laser E Luz
and replace. Pulsada
BCMED
CAMISETA MENINO FAÇA VC
Use Reserva
TIMING BELT
Standard GT2. 2mm pitch, 6mm wide. As for the length, these are contributed by
people on Reddit:
Things will be easier if you have a belt tensioner, just buy one long roll and cut it
yourself.
x
TIMING PULLEY
Deez Nuts are attached to the end of the stepper motor. GT2, of course. 20 teeth,
5mm bore.
FILAMENT NOZZLE
The “factory default” nozzle size of the Ender-3 is 0.4mm. But some people swap a
larger diameter to “print faster”, and some swap a smaller diameter to “print finer”.
Not sure how much of a difference it makes, but check out this post if you are
interested to know more about the nozzle size.
COLLER FAN
x
40 X 40 X 10 mm fan, 24 V 0.1 A… Sometimes also known as 4010 DC fans. Some
people may be thinking of getting “upgraded” fans, but the key is to control the
temperature. You do not want the filament to cool too fast and harden too early.
Neither is “hot and squishy” filament a good idea.
FILAMENT TUBE
The standard diameter of filaments is 1.75mm, and the diameter of the tube itself is
2mm. As for the length… You will have to guesstimate. So long as it can reach end-
to-end, it works.
ENDSTOP SWITCH
x
Also sometimes known as the “limit switch”. I am not quite sure if these are standard
switches or an “Ender-specific switch”. In any case, they are easily available online.
HOTBED
POWER SUPPLY
x
The original power supply is 24V 15A. But subjective again, if you want to upgrade
to a better 24V power supply – Go ahead.
POWER CABLE
IEC 60320 C13, otherwise also known as the common “kettle plug”.
MOTHERBOARD
x
The “original” Ender 3 comes with a version 4.1.1 motherboard. They can be
easily identified, as these motherboards are using the old mini USB. Don’t
think these are available in the market anymore.
The later Ender 3 pro, Ender 3 pro V2, and Ender 5 models come with
V4.2.2. Then, they are further upgraded to V4.2.7. Yep, you guys who are still
using the older 4.1.1 can technically upgrade to the newer version. They
supposedly have better stepper motor control, are more quiet, prints better,
and are backward compatible.
Finally, some people prefer to switch to the “alternative” SKR Mini E3
motherboard. Not sure about this one, as I have not personally tried it. Just
do a quick search on YouTube videos if you want to find out more.
DISPLAY SCREEN
There are now 3 different “types” of screens for the Ender-3 models:
12864 LCD screen – The older black-and-white screen for Ender-3 and
Ender-3 Pro.
Color LED screen – I cannot find any model information on this. But the later
Ender-3 Pro V2 comes with this one. Not a touch screen though.
Touchscreens – Yep, some third parties also offer touchscreen kits to
upgrade the older Enders.
THE END
Thank you for reading, and we have come to the end of this guide.
Please comment below if I got some parts wrong, missed out on
some parts, or if you have anything to share with this guide. Good
luck and happy printing.
x
← Previous Post Next Post →
TEDDLESRUSS
JULY 21, 2022 AT 7:30 AM
TY for sharing! I’ve bought pretty much all the bits for a 2nd Ender3Pro over the last
year except a handful of special bits like the Y carriage and tensioners while
upgrading mine. I might use this page as a shopping list for the bits I’m still missing.
You forgot the motherboard saga – 4.1.1 with a mini USB generally on Ender3, 4.2.2
or 4.2.7 with a micro USB on Ender3Pro or V2.
And loud vs silent stepper drivers. Ay yi yi…
But definitely a great list, thanks again for compiling and sharing.
Reply
W.S. TOH
JULY 22, 2022 AT 8:59 AM
Reply
EDWARD HENSHALL
JULY 4, 2022 AT 12:34 AM
could you please include hotend fan specs? mine broke and instead of buying 1:1
replacemtn i wanted to see if there was soemthing else with specs?
Reply
W.S. TOH
JULY 7, 2022 AT 1:36 AM
Reply
3DGUY
OCTOBER 18, 2021 AT 4:09 PM
Hello,
In regards to the “support” extrusions there are 2 distinct “types”. There are “V” and x
“T” types. The “V” type is used on the Enders. Also, the specific extrusion profiles
used by Creality are difficult to find. The problem is that the “V” channels used for
thing like roller wheels are not consistent between manufacturers.
Also, you have the Z and Y axis reversed in your list. The “Z” is up/down, and “Y” is
front/back.
Reply
W.S. TOH
OCTOBER 19, 2021 AT 1:53 AM
Reply
SCHWETTY BAWLS
MAY 19, 2021 AT 2:50 AM
Reply
W.S. TOH
MAY 20, 2021 AT 2:11 AM
Updated the list – Take note, dimensions are based on my Ender-3 pro. Not too
sure if V2 retains the same dimensions.
Reply
Leave a Comment
Your email address will not be published. Required fields are marked *
Type here..
Name* Email*
x
Post Comment »
Copyright © 2023 Red Dot Geek. All rights reserved.
Red Dot Geek participates in the eBay Partner Network, an affiliate program designed for sites to earn commission fees by linking to
ebay.com. We also participate in affiliate programs with Bluehost, ShareASale, Clickbank, and other sites. We are compensated for
referring traffic.