Professional Documents
Culture Documents
Name DOC1138106
Revision 1
Originator 305018642_manoj_kumar_singh m b
Release Date
Obsolete Date
Periodic Review
There are no signatures or routes related to this business object.
Obsolesence Approval
There are no signatures or routes related to this business object.
Data Sheet
Product Description
BRIVO XR115 is high-frequency analogue radiographic mobile X-ray equipment capable of generating
and controlling X-rays for diagnostic procedures when plugged into electrical outlet. The equipment can
be moved manually within the center to perform radiographic exam.
The targeted clinical users include qualified trained doctors, radiographers or radiologic technicians/
technologists, or other qualified Health Care Professionals.
Approved
Rendered PDF File Page 3 of 5 DOC1138106, Rev:1
Brivo XR115 is indicated for taking radiographic exposures of the skull, spinal column, chest, abdomen,
pelvis and extremities, with the patient sitting, standing, or lying in the prone or supine position. The
system has medical applications ranging from but not limited to cranial, skeletal, thoracic, and lung
exposures.
Product Specifications
System
Input voltage range 230VAC +/-10%
Max current < 16 Amps
Boot time < 10 seconds
Reset time < 5 seconds
Duty cycle time 1 : 30
Generator/Tube
Output Power 4 kW
System frequency 200 kHz
kV range 40 to 100 kV
mA range 10 to 100 mA
mAs range 0.1 to 250 mAs
Exposure time range 10ms to 5sec @230 V AC
kV step Jump step of 2kV for 40-70kV, then step of 5kV till 100kV
mAs step Renard scale
Tube type Stationary anode
Tube focal spot 1.8mm
Inherent filtration <= 1.5mm Al
Collimator
Collimator rotation +90 to -90 degrees
Collimator lamp lux 160 lux @ 1m SID (As per IEC)
FOV adjustment Knob-operated collimator shutters for manual FOV adjustment
Timer for lamp Auto off <=30 seconds
Lamp watt 100W (+/-5% variation)
Approved
Rendered PDF File Page 4 of 5 DOC1138106, Rev:1
Physical specifications
Dimensions (L x W x H) <= (1280 x 600 x 1500) mm
Weight < 120 Kgs
System push/pull force < 20N (~2kgf)
Arm up/down force < 40N (~4Kgf)
Turning radius <= 1.04m
Ground clearance >= 100mm in parked condition
Positioner type Swivel arm mechanism
Brake type Foot-operated parking brakes
Tube arm bracket rotation +/- 180 degrees
Tube rotation within bracket -45 to +180 degrees
Focus to Floor distance <= 400mm to >= 2000mm
Human-Device interfaces
Control panel Control panel with membrane keypad with switches of standard size
Display The digital display has the interface to adjust & display kV and mAs
parameters. It indicates System ON, System OFF, status and fault
messages on the kV and mAs area
Console The console has provision to change the kV and mAs parameters.
Provision provided for resetting the current error.
Alarms The console informs the user once prepare is completed by audio &
visual indications. During exposure, the user is informed through
audiovisual indications. In case, error occurs during exposure, user shall
be informed by continuous alarm with fault indicator.
Other
Technique selection 2-point technique (kV, mAs)
Cassette holder Up to 6 cassettes
Mains cable length Up to 4.5 meter
SID measuring device Measuring tape of length 2 meter minimum
FOV @ 1m SID Minimum 43cm x 43cm
Handles System push handle at <95 cm from floor
Handle for Tube head rotation
Handle for Collimator rotation
Accessories holder Provided
Mains Cable winder Provided
Approved
Rendered PDF File Page 5 of 5 DOC1138106, Rev:1
Dimensional Drawing
Approved