You are on page 1of 660

Huawei Antenna Products Catalogue 2023

Global 5G deployment is accelerated. By now, there are 230+ commercial networks, 3+ million base stations,
and 700+ million 5G users. 5G smartphone penetration has exceed 60% globally. After three years of
commercial deployment, 5G has brought better user experience to consumers, connected more homes, and
enabled digital transformation of the entire society. 5G brings cross-generational experience to users. Global
carriers have achieved a 10-fold improvement in user experience (5G vs. 4G) and further upgraded experience.
For example, the proportion of HD videos (greater than 720p) on networks has increased from 40% to 60%.

5G Leads the Stride

230+ 3 mn+ 700 mn+ 60%+


5G Networks 5G Sites 5G Subscribers 5G Smartphone Shipment

5G 5G
5G
5G

10x 20%
Experience High definition ratio
* >720p high definition ratio

As we all know that, mobile users and vertical industries will definitely increase. High-quality networks will
make users more and more interested in wireless connections, and the DOU and traffic will grow rapidly. We
estimate that the traffic will increase by 100 times by 2030. If we maintain the energy efficiency of existing
networks, the energy consumption of wireless networks will increase by tens of times, which obviously does not
comply with the general trend of energy saving and emission reduction in the whole society. To meet the Paris
Agreement and ITU requirement, the energy consumption of wireless networks needs to be reduced by 45% by
2030. Therefore, during 5G network construction, we suggest that while ensuring network quality and user
experience, we also need to focus on green and low-carbon network performance and energy saving.

100X traffic
Sites
45%
channel
Energy
BW consumption
spectrum

Energy consumption
2020 2030

5G innovation will not stop. Wireless industry will move towards the 5.5G era, and all frequency bands will evolve
to 5G in the future. 5.5G will deliver 10 times of network capability upgrades, providing 10 Gbps downlink and 1
Gbps uplink experience, 100 billion connections, and native intelligence to meet diverse service requirements.
Huawei will provide more efficient solutions to help operators build mobile networks with optimal performance,
lowest energy consumption, best experience, and strongest evolution capabilities.

10Gbps 1Gbps 100Billion


Downlink UPlink Connections
As the signal transmitting and receiving end of the wireless network, the antenna has a crucial position in the
network and is the boundary of the wireless network capability. The array capability, aperture size, and energy
efficiency of antennas are key factors for antenna performance.

Break the Energy Efficiency Boundary

Antenna efficiency improvement is not only about reducing RF loss inside the antenna, but also about optimizing
the radiation field. It means that antenna energy efficiency should be defined end-to-end, from antenna RF ports
to space radiation to end user.

RF efficiency Coverage efficiency Beamforming efficiency


Reducing transmission loss Concentrating radiated energy enhancing effective energy to terminal

Radiated
Power

concentrated beam unconcentrated beam

 RF efficiency
Antennas, as unique devices that convert between radio frequency (RF) energy and electromagnetic waves,
transmit the RF energy to mobile devices. The efficiency in which the antennas convert energy has a significant
bearing on the power consumed by base stations. Generally, the ratio of RF energy to electromagnetic wave
energy converted by an antenna is the energy efficiency of the antenna.
 Coverage efficiency
In addition to the main lobe, the antenna pattern also has side lobes and back lobes. And from the 3D pattern
analysis, as the antenna complexity increases, the antenna pattern is easily deformed and the energy is
unconcentrated. Therefore, radiated energy in the space cannot be completely projected to the target area. As
shown in Figure 1 and 2, by optimizing the radiation directionality, we can reduce invalid electromagnetic signals
and interference to neighboring cells and more energy can be projected to the target area. That means the
coverage efficiency is improved, and the network coverage quality is further improved.
Figure 1. High coverage efficiency

3D Pattern 2D Pattern Cell coverage

Figure 2. Low coverage efficiency

3D Pattern 2D Pattern Cell coverage

 Beamforming efficiency
In a beamforming situation, we need to improve antenna RF channel accuracy, ensure phase consistency of
multiple arrays, and improve MIMO performance. In the end, users get more energy, which means they have a
better experience.

Figure 3. Eight-channel Array Figure 4. High beamforming efficiency (Phase error x=0)

-80

-60

-40

-20

20

40

60

80

-150 -100 -50 0 50 100 150

Figure 5. Low beamforming efficiency (Phase error x=15)

-80

-60

-40

-20

1 2 3 4 20

Phase Phase Phase Phase 40

error error error error 60


-X +X -X +X sidelobe
80

-150 -100 -50 0 50 100 150


Break the Deployment Boundary

As networks evolve, spectrum resources continuously increase. This leads to the proliferation of boxes on a site,
such as antennas and RF units. To address this challenge, antenna configurations need to be continuously
improved. That is, one antenna needs to support all frequency bands to limit the number of antennas on the tower.
Currently, the A+P integrated antenna mode used in the communications industry is a good example of efficient
form innovation, accelerating site deployment. However, there are still challenges in the future. For example,
multiple massive MIMO in different frequency bands will be deployed in the future. Therefore, passive antennas
with powerful integration capabilities are required to adapt to more massive MIMO antennas.

Multiple antennas 1+1 A+P in One

Break the Aperture Boundary

Increasing the antenna aperture is an direct way to improve antenna performance. However, increasing antenna
width results in high wind load of the antenna, which makes network deployment more difficult. In the case of
mobile phones, foldable screens can balance the size and performance well. Therefore, the antenna may also
increase the aperture in the similar way without width increment.

Small Screen Large Screen Foldable Screen

369mm 499mm 499mm

We use the preceding methods to upgrade antennas to break the aperture boundary, achieving channels double
without size increment.
S3

More channels Sector Recombination

Traditional antenna networking Too wide Foldable antenna networking


Antenna Green Target Network

Extreme Efficiency
EFFICIENCY
Energy saving and emission reduction | reducing OPEX

Simplified Deployment
DEPLOYMENT
N->1, Antenna integration | OPEX & TTM saving

Gigabit Experience
PERFORMANCE
Indoor coverage optimization | experience improvement

Smooth Evolution
SPECTRUM
New frequency | 4+8+M evolution

 Energy efficiency: Energy-efficient antenna enables energy saving for the base station and helps operators to
save OPEX and build a green and low-carbon network.
 Deployment: The integrated and miniaturized design enables one antenna to support all frequency bands,
building a simplified network.
 Performance: The multi-antenna technology is applied to improve antenna performance and build a cross-
generational experience network.
 Spectrum: For low-band 4T4R, mid-band 8T8R, and high-band Massive MIMO target networks, antennas must
be capable of evolution, and one-time deployment meets long-term network evolution.
New antenna product solution for 2023, building better and greener network

Hertz Platform Maxwell Platform

Full-scenario FDD 8T8R deployment Flexible integration of multiple modules


Brings ultimate capacity
Suburban: 2L4H
Architecture: 2L8H
Width × depth: 399 × 206 mm
 700-900MHz 4T4R
 1.8G-2.6GHz 4T4R/8T8R
Urban: 2L6H
 1.4-2.6GHz 4T4R
Width × depth: 499 × 206 mm
Dimension(L*W):
 2099*509 mm
Hot spot: 2L6H+TDD 8T8R
Width × depth: 499 × 206 mm

Meta BladeAAU Future Multiple AAUs


Capability

 Improves the NR 8T8R capacity by 15% with UPA


① C band AAU
 Full-band SDIF inside
MetaAAU
 Supports evolution from LTE 4T4R to NR 8T8R on 1.8– 3.5G 64TRx ① 2.3/2.6GHz AAU

2.6 GHz
③ 1.8&2.1GHz AAU

Preliminary Issue

Eco Series X2 Antenna

Benchmark of energy-efficient antennas Channels doubled without size increment


Enable free deployment of low bands

Super High Gain 2L2H 2L4H

4L8H 499mm

 Full-band SDIF, improving energy efficiency  Low-band PIM free:800/900M + 700M PIM free
 Meta Lens technology, improving coverage efficiency  Sub3G unconstrained sharing:
 More than 15% energy saving for the base station Operator A & Operator B : 700-2600M 4T4R
 Future sub1G 8T8R: 700/800/900M

Preliminary Issue Preliminary Issue


Abundant Innovative Technologies Meet Demands of 5G Green Networks

Ultimate Efficiency Fast Deployment Ultimate Experience

SDIF improves Industry 1st energy Interleaved design Optimal design of radome Frame-type SDIF UPA
energy efficiency efficiency read tool -30% width -30% wind load enables more AAUs +15% capacity

Industry 1st Meta lens MQ4&MQ5 GFRPP radome Power sharing Meta materials
laser welding +10% coverage efficiency easier O&M -6~7kg weight +8-10% throughput A+P all in one

Continually Make Contributions for Industry Development

Jointly Promote Industry Development Contribute to Industry Sustainability

NGMN Green Future Green Sky Program


Global Antenna Technology
MBBF MWC Network project Green Sky White Paper
& Industry Forum

Regional Summits Antenna Expert Talk HAS NGMN Wind Load Definition
FDD 8T8R White Paper
Wind Load Test optimization

Huawei Antenna, Your Long-term Reliable Partner

Eight global R&D centers, 1200+ R&D experts, 980+ global patents, and continuous innovation build high
performance, high efficient, and highly integrated, helping global operators build high-quality networks.

Winner of GSMA GLOMO “Best Mobile Winner of GSMA GLOMO “Best Mobile Winner of GSMA GLOMO “Best Mobile
Technology Breakthrough" Award Network Infrastructure" Award Innovation for Emerging Markets" Award

Winner of GSMA GTI “Outstanding & Innovative Winner of GSMA GLOMO “Best Mobile
Breakthrough in Mobile Technology" Award Innovation for Climate Action" Award
Green growth and environmental protection are the key to the sustainability of the global economy. As global
climate change escalates, the synergy between economic progress and natural boundary has become a worldwide
issue, and carbon neutrality is now a common priority for all countries.
It requires concerted efforts from governments, industries, transportation, energy, agriculture, and many other
fields to urgently transform economic development from traditional patterns to green paradigms. To fulfill this
target, the ICT industry takes on the pioneering responsibilities for a green economy.
The green-oriented innovations of wireless networks require end-to-end collaboration of network devices. As an
essential component that transmits and receives signals on wireless networks, antennas play an important role in
saving energy and reducing emissions from networks.
Green Sky Program aims to explore the targets and directions of technology innovation for base station antennas
to promote green development of wireless networks.

40% 50% 0%
(cable/ PCB/ plastics)
Improve energy efficiency of Reduce number of
antenna & feeder system boxes per band Reduce pollution in production

Architecture Form Factor Manufacturing Process


Experience Leading Antennas and Innovative Technologies

Three Innovation Labs


Innovative Antennas and Technologies, Seeing is Believing

Maxwell Innovation Lab Wireless Innovation Lab Antenna Innovation Center


@Dongguan @Shenzhen @Munich

Experience the Strictest Reliability Tests in the Industry

Environment Test Vibration Test Rain Test

Ice Load test Salt Spray Test Drop Test

90+ Reliability Tests, Building No.1 Quality Antenna

Leading Test and Production Systems for Optimal Antenna Performance

SG178 Test Lab Automatic Laser Welding Advanced Production Line

The global largest spherical The industry’s 1st antenna laser Automatic production process
near-fields test lab welding manufacturing End-to-end quality assurance
Antenna Type Naming Rule: Type1

Example: D -XXXXX- 690-960/1710-2690/1710-2690/1710-2690/1710-2690 -65/65/65/65/65-17i/18i/18i/17.5i/17.5iM/M/M/M/M


- -B/R

Diagram: X1 X2 X3 X4 X5 X6 X7

Polarization Half-power Downtilt type


beamwidth

Antenna type Frequency range Gain Antenna


characteristic

A ACSR

D Directional

O Omni-directional

C Cluster
X1
I Indoor

Number + M Multi Beam, 3M means three beams

CP Camouflage Pipe

CS Camouflage Square Column

X X Polarization

V Vertical Polarization
X2
H Horizontal Polarization

C Circular Polarization

X3 Number Frequency Bandwidth

X4 Number Half-power Beam Width

X5 Number Gain(dBi)

Number + Letter 0F: Fixed Downtilt


X6
Letter M: Electrical Downtilt

C Combiner Integrated

B Bias Tee Integrated

T TMA Integrated

X7 R RCU Integrated

AS Azimuth Steering

HE High Efficiency

ESLS Enhanced Side Lobe Suppression

** For antennas with 14 or more ports, the same letters are represented in the “Number + Letter" format for the X2, X3, X4, and
X6 bits. For example, for the "X2" bit, "7X" indicates "XXXXXXX".

Product
Category
Antenna Type Naming Rule: Type2

Example: D - 06X - 2x690-960/4x1710-2690 - 2x65/4x65 - 2x15.5i/4x18i - 6xM - R

Diagram: X1 X2 X3 X4 X5 X6 X7

Polarization Half-power Downtilt type


beamwidth

Antenna type Frequency range Gain Antenna


characteristic

A ACSR

D Directional

O Omni-directional

C Cluster
X1
I Indoor

Number + M Multi Beam, 3M means three beams

CP Camouflage Pipe

CS Camouflage Square Column

X X Polarization

V Vertical Polarization
X2
H Horizontal Polarization

C Circular Polarization

X3 Number Frequency Bandwidth

X4 Number Half-power Beam Width

X5 Number Gain(dBi)

Number + Letter 0F: Fixed Downtilt


X6
Letter M: Electrical Downtilt

C Combiner Integrated

B Bias Tee Integrated

R RCU Integrated

X7 AS Azimuth Steering

ESLS Enhanced Side Lobe Suppression

EMF EMF

TD Topology detection

Product
Category
Product Model Naming Rule

Antenna Model Naming Example


Type1

A OC 45 18 R 0 v06 Notes for frequency characters:


45: Single-band antennas (450-470 MHz)
70: Single-band antennas (690-960 MHz)
Version 79: Single-band antennas (790-960 MHz)
19: Single-band antennas (1710-2200 MHz or 1710-2170 MHz)
Different antenna in ascending order 26: Single-band antennas (1710-2690 MHz)
Antenna types DU: Dual-band antennas
R: RCU Integrated TR: Tri-band antennas
Number: MET or FET
S: Cluster antenna QU: Quad-band antennas
PE: Penta-band antennas
Gain (the maximum gain of all the bands)
SI: Six-band antennas
Polarization HP: Hepta-band antennas
OC: Octa-band antennas
Frequency characters
OC: Octa-band 09: Nine-band antennas


A: Antenna products
C: Camouflage antennas 16: Sixteen-band antennas
TD: TDD antennas
Type2 MB: Multi-beam antennas

A 06 240 P D 00 v06 N

Option: Reserved

v06: 4.3-10 connector


v01/v02 version (optional)
Different antenna in ascending order

Beam shaping attribute


D(Digital): Adjustable Beam
A(Analog): Consistent Beam

Physical aspect
P: Panel Antenna
R: ACSR Antenna
B: BladeAAU Antenna
C: Camouflage Antenna

Port couple numbers distribution


0: pairs of port (≥3GHz)
4: pairs of port (1-3GHz)
2: pairs of port (≤1GHz)

Frequency characters
06: 6 pairs of port

A: Antenna products

Product
Category
Product Model Naming Rule

RCU Model Naming Example: AIMM Model Naming Example:


A RCU 020 04 v01 A IMM 21 S 11 EB v01

v01/v02 version (optional)


v01/v02 version (optional)
Functional character (optional)
EB: Easy Beam

Different RCU in ascending order 00-- MET module


11-- AISG interface: 1 input 1 output
22-- AISG interface: 2 input 2 output

AISG version AIMM types


011: AISG 1.1 S: for single-band antenna
020: AISG 2.0 D: for dual-band antenna
M: for multi-band antenna

RCU AISG version: 20 (AISG 2.0)/21 (AISG 2.1)

IMM: Information management module

ALD products ALD products

TMA Model Naming Example: Combiner Model Naming Example:


A TA 26 20 00 v06 A COM D 2 H 11 v06

v06: 4.3-10 connector


v06: 4.3-10 connector v01/v02 version (optional)
v01/v02 version (optional)
Different combiner in ascending order
DC bypass properties
Different TMA in ascending order
H: High-band DC bypass
L: Low-band DC bypass
A: All bands DC bypass
AISG version (4.3-10 connector only)
11: AISG 1.1 S: Auto-sense DC bypass
20: AISG 2.0 N: Filter or No DC bypass

Frequency 2: Dual unit


26: 2600M TMA Frequency character
DU: Dual-band TMA D: Dual-band combiner
T: Triple-band combiner
TA: TMA Q: Quad-band combiner
COM: Combiner
ALD products ALD products

Product
Category
Colour Coding and Symbols

Antenna Port Colour Coding

Colour coding is used to identify antenna RF ports and also for RET remote identification. Colour coding consists of
five parts generally: colour code, pattern coding, array numbering, array symbol and RCU serial number.
14-Port EasyRET antenna is used as an example to illustrate colour coding:

1. Colour Code 2. Pattern Coding


(Used to distinguish different (Used to differentiate array ports
bands. For details, please see carrying the same colour code.
chapter 1.) For details, please see chapter 2.)

3. Array Numbering
(Used to mark different array ID and
array positions. For details, please see
chapter 3.)

4. Array Symbol
(Used to display the physical structure of the antennas. For details, please see chapter 4.)
Two types of array symbol are used (Type 1 and Type 2). Which type is used depends on specific antennas. This also
applies to chapter 3 Array numbering and chapter 7 RCU serial number.

Type 1 Type 2
2 Low Bands Filtered 2 Low Bands Filtered
r2 r1: 690-862MHz rr r: 690-862MHz
y1 yL
r2: 880-960MHz rr: 880-960MHz
r1 and r2 share the same low-band array r and rr share the same low-band array

y2 y3 4 high-band arrays yyC yyyR 4 high-band arrays


b1: 1695-2200MHz b: 1695-2200MHz
y1: 2490-2690MHz yl: 2490-2690MHz
b1 y2: 1695-2690MHz b yyC: 1695-2690MHz
r1 y3: 1427-2690MHz r yyyR: 1427-2690MHz
b1 and y1 share the same high-band array b and yL share the same high-band array

5. Integrated RCU Serial Number


(Used to distinguish RCUs of different bands to support remote RCU identification. For details, please see chapter 5.)

Type 1: Type 2:
HWxxx..........r1 HWxxx..........b2 HWxxx..........r HWxxx..........bbC
HWxxx..........r2 HWxxx..........b3 HWxxx..........rr HWxxx..........bbbR
HWxxx..........b1 HWxxx..........y2 HWxxx..........b HWxxx..........yyR
HWxxx..........y1 HWxxx..........yL

Product
Category
Colour Coding and Symbols

1. Colour Code
According to AISG, the upper band edge ranges of the antenna port are represented by red, green, blue, and yellow
in sequence from the low band range to the high band range. The following table shows the definition of the
frequency range and the associated colour code abbreviation.

Upper Band Edge Range Colour Colour Code Abbreviation

380MHz to 1000MHz Red r

1001MHz to 1700MHz Green g

1701MHz to 2300MHz Blue b

2301MHz to 3000MHz Yellow y

3001MHz to 5000MHz Purple p

5001MHz to 6000MHz Orange o

2. Pattern Coding
Pattern coding is used to differentiate array ports carrying the same colour code.
Two types of pattern coding are used (Type A and Type B). Which type is used depends on specific antennas.
Type A:
The number of dots is shown in the following figure.
Note: The dot may be black or white.

y1 y2 y3 y4 y5 y6
Type B:
Different segments of color and gaps are shown in the following figure.
Note: Gaps between colored segments may be white gaps or black lines.

y1 (or y) y2 (or yy) y3 (or yyy) y4 (or yyyy) y5 (or yyyyy)


Multi-beam Coding:
Note: the yellow color will related to corresponding port ,

Dual-beam Tri-beam 4-beam

3. Array Numbering

For multi-band antennas, different arrays are indicated by their colour code abbreviations, array IDs, as well as array
positions. There are two types of array numbering.
Array ID: e.g. “y1” or “y” for the first high-band array, ”y2” or ”yy” for the second high-band array.

Product
Category
Colour Coding and Symbols

Array position is represented by abbreviation (e.g. L, C, R, T, M, and B), the following table shows the details.

Array Horizontal Definition Array Vertical Definition


Abbreviation Full Name Abbreviation Full Name
L Left Array T Top Array
C Center Array M Middle Array
R Right Array B Bottom Array

Take 14-port antenna for example, array with Ry2 or yyR means the second high-band array and located at right
position inside of antenna.

4. Array Symbol

In order to better display the physical structure of Huawei antennas, the array symbol corresponding to the array ID
and array position is shown in the catalogue.
The following figures show the physical structures of different antennas as examples:

Type 1 or Type 2 Type 1 or Type 2

I. 4-Port Antenna
II. 4-Port Antenna
2 Filtered Low Bands ("Dipole reuse")
r1 r2 r rr 2 Filtered High Bands ("Dipole reuse")
e.g. 790-862/880-960 or y1 b1 y b
e.g. 1710-2170/2490-2690 MHz
690-803/824-960 MHz

Type 1 or Type 2 Type 1 or Type 2

IV.6-Port Antenna
1 Low Band
III.4-Port Antenna
2 Side-by-side High-band Arrays
2 Side-by-side High-band Arrays
y1 y2 yL yyR e.g. 790-960/1710-2690/1710- y1 y2 yL yyR
e.g. 1710-2690/1710-2690 MHz
2690 or 690-960/1710-
2690/1710-2690 MHz

r1 r

Type 1 or Type 2 Type 1 or Type 2

V. 8-Port Antenna VI.10-Port Antenna


1 Low Band 1 Low Band and
y2 y4 yLT yyyRT
3 Side-by-side High-band 4 High-bands
Arrays y1 y2 y3 yL yyC yyyR e.g. 690-960/1695-2690/
e.g. 690-960/1710-2690/ 1695-2690/1695-2690/
1710-2690/1710-2690 MHz 1695-2690 MHz y1 y3 yyLB yyyyRB

r1 r r1 r

Product
Category
Colour Coding and Symbols

5. RCU Serial Number

The SN (serial number) of integrated RCU contains colour coding information, EasyRET antennas support remote
RCU identification by colour coding.
The SN of an integrated RCU contains 19 digits. The following describes a hexa-band EasyRET antenna's SN as an
example:
Note: This naming convention is the mainstream scene. If you have any questions, please contact us.

Type 1: H W N 2 4 3 0 G 9 0 0 1 0 0 2 1 R y 2

Type 2: H W M 2 4 3 0 G 9 0 0 1 0 0 2 1 y y R

Color coding:
Use the last or last several
digits to show the band
features and position of the
antenna port. Fill other digits
that are not used with a
random code.

Running number (random)

Delivery month (9: September)

Delivery year (G: the year of


2016)
ITEM code of the antenna

RET Type, M/N: integrated RCU

Manufacturer code, fixed as HW

Product
Category
Product Replacement List

Product in the catalogue 2022 Product in the catalogue 2023

ANTENNA

APE4518R47v06 APE4516R1v06
ADU450900v06 ADU451200v06

AMB4520R2v06 AMB4519R5v06

A06240PD00v06 A08260PD00v06

ASI4517R12v06 ASI4517R12v07

ATD4516R8 ATD4516R8v08

COMBINER

ACOMD2A07v06 ACOMD2A07v07

ACOMD2L11v06 ACOMD2L11v07

ACOMD2H25v06 ACOMD2H25v07

Product
Category
L: Low Band, ≤960MHz; H: High Band, > 960MHz
1LnH: means 1 Low Band and n High Bands, n: 1, 2, 3

A
Active

AAU &
ACS
Antenna AAU & ACS & Maxwell

L Band &
B - 1 Low Band

H Band
2 ports 4 ports

2 ports 6 ports
B - 2 High Band 4 ports 8 ports

1LnH Band
4 ports - 1L1H 10 ports - 1L4H
B - 3 1LnH 6 ports - 1L2H 12 ports - 1L5H
8 ports - 1L3H

Multi-band

2LnH Band
8 ports - 2L2H 14 ports - 2L5H
B - 4 2LnH 10 ports - 2L3H 16 ports - 2L6H
12 ports - 2L4H 20 ports - 2L8H

3/4LnH Band
B
10 ports - 3L2H 18 ports - 3L6H
B - 5 3LnH
Passive Antenna 16 ports - 3L5H 30 ports - 3L12H
B - 6 4LnH 24 ports - 4L8H

Multi-beam
Multi-beam

NR\TDD
FDD +
FDD 8T8R FDD + TDD TDD Antenna

Others
X2 &
Multi-panel Antenna Special Scene Antenna

C Digital Antenna
System
C - 1 RET System
Digital
TMA

D - 1 TMA

D Antenna Line
Product
Combiner

D - 2 Combiner
Installation Guide

E
Bracket &
Bracket &

E - 1 ADC Stop E – 2 Bracket


Installation Guide
E–2 Installation Guide
A. AAU and Antenna with Cabinet Suite

Model Page

Meta BladeAAU *A10280BD00v06L Support MetaAAU 3

BladeAAU Pro A08260BA00v06L 6

BladeAAU Pro A08260BA01v06L 11

BladeAAU Pro A06240BA08v06L 14

BladeAAU Pro A06240BA09v06L 17

BladeAAU Pro *A06240BA11v06L Support FDD MM 20

ACSR2.0 A06240RA00v06 24

*Preliminary Issue

1
Product
Category
Meta BladeAAU

Product Description

Meta BladeAAU is a major upgrade based on BladeAAU architecture. Its passive module uses a
new antenna platform, Maxwell Platform. The new platform has greatly improved the
electromagnetic transparency capability: i, It can achieve full-frame electromagnetic transparency.
Based on this capability, passive module can be integrated with MetaAAU to achieve higher
spectral efficiency. Ii, It can not only realize RF signals lossless penetration between low band and
mid-band, but also realize the penetration between different mid-bands, so that the active part
will have more deployment options.

FreSIP 2.0

Maxwell Meta BladeAAU


Platform

Meta BladeAAU Features

Active Module
 Support Meta BladeAAU

Maxwell Platform
 Support 2L4H/2L6H/2L8H configuration
 Support 1.5/2/2.6m length
 Support FDD 8T8R
 FreSIP2.0 inside
 All band SDIF insde

2
Product Product
List Category
A10280BD00v06L
Passive Module of BladeAAU
D10X-2x690-960/2x1427-2200/2x1695-2690/4x2300-2690-7x65-2x15.4i/2x17.0i/
2x17.9i/19.5i-5xM-R
EasyRET 20-Port 2L4H FDD/2.3-2.6GHz 8T8R TDD Antenna – 2.0 m

Passive Module Specifications

Electrical Properties
Frequency range (MHz) 2 x (690–960) 2 x (1427–2200) 2 x (1695–2690)
Polarization +45°, –45° +45°, –45° +45°, –45°
2–12, continuously 2–12, continuously
2–12, continuously adjustable,
Electrical downtilt (°) adjustable, each band adjustable, each band
each band separately
separately separately
Gain (dBi) 15.4 17.0 17.8

Side lobe suppression for first side


Typ.15 Typ.15 Typ.15
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 66 65 58


Vertical 3 dB beam width (°) 9.6 7.2 5.9
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 25 ≥ 25
250 (at 50℃ ambient 250 (at 50℃ ambient
Max. effective power per port (W) 400 (at 50℃ ambient temperature)
temperature) temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50 50 50
Grounding DC grounding DC grounding DC grounding

TDD 8T8R Electrical Properties


Frequency range (MHz) 2300–2690
Electrical downtilt (°) 2–12, continuously adjustable
General parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)
VSWR < 1.5
Gain (dBi) 14.3

Single column beam Horizontal 3dB beam width (°) 86

Vertical 3dB beam width (°) 8.0

Gain (dBi) 15.5


65° Broadcast beam
Radiation parameters Horizontal 3dB beam width (°) 65

0°direct beam gain (dBi) 19.5


Service beam 0°direction beam horizontal 3dB
25
beam width (°)

Soft split Gain (dBi) 18.7


multi-beam Horizontal 3dB beam width (°) 30

3
Product Product
List Category
A10280BD00v06L
Passive Module of BladeAAU
D10X-2x690-960/2x1427-2200/2x1695-2690/4x2300-2690-7x65-2x15.4i/2x17.0i/
2x17.9i/19.5i-5xM-R
EasyRET 20-Port 2L4H FDD/2.3-2.6GHz 8T8R TDD Antenna – 2.0 m

Electrical Properties - Scenario-based Beam (FDD 8T8R)


Frequency range (MHz) 1695–2200

Gain (dBi) 17.2

Single column beam Horizontal 3dB beam width (°) 58


Radiation
Vertical 3dB beam width (°) 5.9
parameters
Gain (dBi) 22

NR Service beam Horizontal 3dB beam width (°) 15.5

Beam isolation (dB) 20

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 509 x 320
Antenna weight (kg) 37.0
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
4 x 4.3-10 Female
Connector 2 x MQ4 Male +1 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom

4
Product Product
List Category
BladeAAU Pro

Product Description

BladeAAU Pro is a revolutionary integrated antenna design form of active antenna and passive
antenna. With the help of innovative Frequency Selective Isolating and Pennatraing (FreSIP) and
Signal Direct Injection Feeding (SDIF), the active module can support 64T64R Massive MIMO and
the antenna specifications of passive module also enhances a lot. This kind of innovative design
can help operators quickly deploy 5G Massive MIMO in the best position. Also the enhanced
capabilities of active and passive modules can brings more network benefits to the operators.

BladeAAU Pro

BladeAAU Pro Features

Active Module
 Support C-band/2.6GHz/2.3GHz 64T64R Massive MIMO
 FreSIP inside

Passive Module
 Support 2L4H/2L6H configuration
 Support 2/2.6m length
 Support FDD 8T8R
 FreSIP inside
 SDIF insde

5
Product Product
List Category
A08260BA00v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x15.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.0 m

Passive Module Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2) 2 x (2490–
Frequency range (MHz) 2690)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 (Ly1/Ry4)
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
separately
At mid tilt 14.6 15.0 15.2 15.2 16.2 16.8 17.8
Gain (dBi)
Over all tilts 14.5±0.5 14.9±0.6 15.1±0.3 15.0±0.4 16.1±0.6 16.7±0.5 17.6±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 69±6 68±6 63±6 69±7 68±7 58±6
Vertical 3 dB beam width (°) 10.7±0.9 9.8±0.8 9.3±0.6 8.8±0.6 7.9±0.8 7.2±0.8 5.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30°(dB) > 20 > 21 > 21 > 22 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) -1.4±0.1 -1.5±0.1 -1.5 ±0.1 -1.7 ±0.2 -1.3 ±0.2 -1.4 ±0.2 -1.5 ±0.2
Efficiency average (%) 73 71 71 68 74 72 70
Max. effective power per port (W) 120 (at 50℃ ambient temperature)* 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1517 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.1 16.5 17.2 17.5 18.0
Gain (dBi)
Over all tilts 15.0±0.9 16.4±0.8 17.1±0.8 17.4±0.6 17.9±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 69±6 67±6 62±6 59±7
Vertical 3 dB beam width (°) 9.8±0.9 8.0±0.8 7.1±0.8 6.4±0.7 5.5±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30°(dB) > 24 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 15 > 15 > 15 > 15 > 15
Efficiency (dB) 1.0 ±0.1 1.1 ±0.1 1.1 ±0.1 1.1 ±0.2 1.1 ±0.2
Efficiency average (%) 80 78 78 78 78
Max. effective power per port (W) 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

6
Product Product
List Category
A08260BA00v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x15.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.0 m

General Electrical Properties


1695–2200 2490–2690
1427–2690 (CLy2/CRy3)
Frequency range (MHz) (Lb1/Rb2) (Ly1/Ry4)
1695–2200 1427–1518 1695–2200 2490–2690 2490–2690
Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately

General Ports VSWR 1.5 / 1.5 1.5 1.5


parameters
Co-polarization isolation between ports (dB) ≥ 23 / ≥ 23 ≥ 23 ≥ 23
Cross-polarization isolation between ports (dB) ≥ 25 / ≥ 25 ≥ 25 ≥ 25
60 (at 50℃ ambient
Max. effective power per port (W) 120 (at 50℃ ambien ttemperature)*
temperature)*
Intermodulation IM3 (dBc) ≤ –150
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

FDD 8T8R Electrical Properties


1695–2200 2490–2690
1427–2690 (CLy2/CRy3)
Frequency range (MHz) (Lb1/Rb2) (Ly1/Ry4)
1695–2200 1427–1518 1695–2200 2490–2690 2490–2690
Gain (dBi) 16.7 / 17.1 18.0 17.8
Horizontal 3 dB beam width (°) 68 / 68 59 58

Single Front to back ratio (dB) ≥ 25 / ≥ 25 ≥ 25 ≥ 25


column Cross polar ratio, 0° (dB) ≥ 15 / ≥ 15 ≥ 15 ≥ 15
beam
Radiation Vertical 3 dB beam width (°) 7.5 / 7.5 5.5 5.7
parameters
Side lobe suppression for first side
> 15 / > 15 > 15 > 15
lobe above main beam (dB)

0° direct beam gain (dBi) 22.1 / 22.1 23.2 23.2


0° direction beam horizontal 3 dB
17.5 / 17.5 13.0 13.0
beam width (°)
Service
beam 0° direction beam front to back
30 / 30 30 30
ratio (dB)
0° direction beam cross polar
15 / 15 15 15
ratio (dB)

7
Product Product
List Category
A08260BA00v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x15.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.0 m

(21)
Mechanical Properties
Passive module dimensions (H x W x D) (mm) 2099 x 470 x 218

Packing dimensions (H x W x D) (mm) 2290 x 665 x 640

Passive module weight (kg) 45.0

Passive module packing weight (kg) 92.0 (Including clamps and downtilt kit)

1769
2099
Mechanical downtilt (°) 0–8°

Radome material Fiberglass

Radome colour Light grey

3 x MQ4 Male + 1 x 4.3–10 Female (CAL)


Connector
4 x 4.3–10 Female

Connector position Bottom

309
Unit: mm

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz Service 0°


(Lr1/Rr2) (CLy2/CRy3) (1695–2200 MHz)

1695–2200 MHz 2490–2690 MHz Service 0°


(Lb1/Rb2) (Ly1/Ry4) (2490–2690 MHz)

8
Product Product
List Category
A08260BA00v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x15.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.0 m

Port and Array Layout

y1 y4
5 7
6

y3 b2
1–2 3–4 b1 y2
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx……Lr1 \

3–4 Rr2 690–960 HWMxxxx……Rr2 \

Lb1 1695–2200 HWMxxxx…..Lb1


5
Rb2 1695–2200 HWMxxxx…..Rb2 HWxxxx……
CLy2 1427–2690 HWMxxxx...CLy2 0bxy23
6
CRy3 1427–2690 HWMxxxx...CRy3 HWxxxx……
0y1234
Ly1 2490–2690 HWMxxxx…...Ly1
7
Ry4 2490–2690 HWMxxxx…..Ry4

L CL CR R
y1 y4

b1 y2 y3 b2

1800–2100 MHz 8T8R 2600 MHz 8T8R

5 4T4R/8T8R-A 6 4T4R/8T8R-B 6 4T4R/8T8R-B 7 4T4R/8T8R-A


MQ4-1 b1.L+ MQ4-1 y2.CL+ MQ4-1 y2.CL+ MQ4-1 y1.L+
MQ4-2 b1.L- MQ4-2 y2.CL- MQ4-2 y2.CL- MQ4-2 y1.L-
MQ4-3 b2.R+ MQ4-3 y3.CR+ MQ4-3 y3.CR+ MQ4-3 y4.R+
MQ4-4 b2.R- MQ4-4 y3.CR- MQ4-4 y3.CR- MQ4-4 y4.R-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

9
Product Product
List Category
A08260BA00v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x15.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work,12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down,12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

10
Product Product
List Category
A08260BA01v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x16.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.6 m

Passive Module Specifications


Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2) 2 x (2490–
Frequency range (MHz) 2690)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 (Ly1/Ry4)
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 16.2 16.3 16.5 16.5 17.1 18.1
Gain (dBi)
Over all tilts 15.5±0.4 16.0±0.4 16.1±0.3 16.4±0.4 16.4±0.6 17.0±0.5 18.0±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 67±6 65±6 68±7 66±6 58±5
Vertical 3 dB beam width (°) 8.9±0.8 8.0±0.6 7.6±0.6 7.2±0.5 7.8±0.7 7.2±0.7 5.7±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30°(dB) > 21 > 22 > 22 > 22 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.6 –0.95±0.15 –1.0±0.15 –1.2±0.20
Efficiency average (%) 69 80 79 76
Max. effective power per port (W) 120 (at 50℃ ambient temperature)* 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1517 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.1 16.7 17.3 17.7 18.1
Gain (dBi)
Over all tilts 15.0±0.7 16.5±0.6 17.2±0.6 17.6±0.6 18.0±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 69±6 67±6 62±6 59±7
Vertical 3 dB beam width (°) 9.7±0.8 8.0±0.7 7.4±0.7 6.5±0.6 5.7±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30°(dB) > 25 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 15 > 18 > 18 > 18 > 17
Efficiency (dB) –0.85±0.15 –0.95±0.15 –1.00±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 82 80 80 77 76
Max. effective power per port (W) 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

11
Product Product
List Category
A08260BA01v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x16.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.6 m

Mechanical Properties

(521)
Passive module dimensions (H x W x D)
2599 x 470 x 218
(mm)
Packing dimensions (H x W x D) (mm) 2790 x 665 x 640 (Including pallet)
Passive module weight (kg) 50.0
113.0 (Including clamps, downtilt kit
Passive module packing weight (kg)
and pallet)

2599
Mechanical downtilt (°) 0–8°

1769
Radome material Fiberglass
Radome colour Light grey
3 x MQ4 Male + 1 x 4.3-10 Female (CAL)
Connector
4 x 4.3-10 Female
Connector position Bottom

309
Unit: mm
Port and Array Layout

y1 y4

5 6 7

b1 y2 y3 b2
1–2 3–4 r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx……Lr1 \

3–4 Rr2 690–960 HWMxxxx……Rr2 \

Lb1 1695–2200 HWMxxxx…..Lb1


5 \
Rb2 1695–2200 HWMxxxx…..Rb2 HWxxxx……
CLy2 1427–2690 HWMxxxx...CLy2 0bxy23
6
CRy3 1427–2690 HWMxxxx...CRy3 HWxxxx……
Ly1 2490–2690 HWMxxxx…...Ly1 0y1234
7 \
Ry4 2490–2690 HWMxxxx…..Ry4

12
Product Product
List Category
A08260BA01v06L
Passive Module of BladeAAU
D08X-2x690-960(B)/2x1427-2690(B)/2x1695-2200(B)/2x2490-2690(B)-8x65-
2x16.5i/2x17i/4x17.5i-8xM-R/CF
EasyRET 16-Port 2L6H Passive Module with 8 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE

RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (Ly1/Ry4)

13
Product Product
List Category
A06240BA08v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m
Passive Module Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
At mid tilt 14.6 15.0 15.2 15.2 15.4 16.2 16.8 17.4
Gain (dBi)
Over all tilts 14.5±0.5 14.9±0.6 15.1±0.3 15.0±0.4 15.3±0.7 16.1±0.8 16.7±0.7 17.3±0.8
Side lobe suppression for first side lobe
> 15 > 16 > 16 > 16 > 16 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 69±7 69±6 64±6 69±7 65±6 62±6 58±6
Vertical 3 dB beam width (°) 10.3±0.9 9.5±0.7 9.1±0.7 8.5±0.6 10.4±0.9 9.4±0.9 8.1±0.7 7.4±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 20 > 21 > 21 > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 15 > 15 > 15 > 15 > 16 > 18 > 18 > 17
Max. effective power per port (W) ≤ 120 (at 50℃ ambient temperature)* ≤ 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1517 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt 14.2 15.4 16.3 16.7 17.2
Gain (dBi)
Over all tilts 14.1±0.8 15.3±0.7 16.2±0.8 16.6±0.7 17.1±0.8
Side lobe suppression for first side lobe
> 15 > 15 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 73±8 69±6 65±5 62±6 58±6
Vertical 3 dB beam width (°) 12.2±0.7 10.2±0.9 9.2±0.9 8.2±0.5 7.3±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 16 > 16 > 18 > 18 > 17
Max. effective power per port (W) 80 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

14
Product Product
List Category
A06240BA08v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m

(21)
Mechanical Properties
Passive module dimensions (H x W x D)
2099 x 499 x 218
(mm)
Packing dimensions (H x W x D) (mm) 2290 x 665 x 640 (Including pallet)
Passive module weight (kg) 39.0
90.5 (Including clamps, downtilt kit and

1763
Passive module packing weight (kg)
pallet)

2099
Mechanical downtilt (°) 0–8°
Radome material Fiberglass
Radome colour Light grey
2 x MQ4 Male + 1 x 4.3–10 Female (CAL)
Connector
4 x 4.3–10 Female
Connector position Bottom

315
Port and Array Layout Unit: mm

5 6

y1 y2 y3 y4
r1 r2
1–2 3–4

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx……Rr2

Ly1 1695–2690 HWxxxx…..Ly1


5
Ry4 1695–2690 HWxxxx…..Ry4

CLy2 1427–2690 HWxxxx...CLy2


6
CRy3 1427–2690 HWxxxx...CRy3

15
Product Product
List Category
A06240BA08v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (CLy2/CRy3) (Ly1/Ry4)

16
Product Product
List Category
A06240BA09v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x16.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.6 m
Passive Module Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.6 16.0 16.2 16.3 16.8 17.2 17.6 18.2
Gain (dBi)
Over all tilts 15.5±0.5 15.9±0.5 16.0±0.5 16.1±0.5 16.6±0.6 17.1±0.5 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 15 > 17 > 17 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 69±6 68±6 65±6 69±7 68±5 61±5 58±4
Vertical 3 dB beam width (°) 8.8±0.8 8.1±0.6 7.7±0.5 7.1±0.5 7.9±0.8 7.2±0.8 6.5±0.5 5.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 23 > 25 > 25 > 25 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.70 –0.75±0.15 –0.80±0.15 –0.95±0.15 –1.00±0.25
Efficiency average (%) 68 84 83 80 79
Max. effective power per port (W) 120 (at 50℃ ambient temperature)* 120 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.4 16.8 17.2 17.6 18.1
Gain (dBi)
Over all tilts 15.2±0.9 16.6±0.8 17.1±0.8 17.5±0.6 18.0±0.6
Side lobe suppression for first side lobe
> 15 > 17 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 69±6 65±5 62±5 59±5
Vertical 3 dB beam width (°) 9.8±0.9 8.0±0.8 7.1±0.8 6.4±0.7 5.5±0.6
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 26 > 27
Cross polar ratio, 0° (dB) > 15 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.15 –1.00±0.25
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 120 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)

17
Product Product
List Category
A06240BA09v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x16.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.6 m

(269)
Mechanical Properties
Passive module dimensions (H x W x D)
2599 x 499 x 218
(mm)
Packing dimensions (H x W x D) (mm) 2790 x 665 x 640 (Including pallet)
Passive module weight (kg) 48.0
111.0 (Including clamps, downtilt kit
Passive module packing weight (kg)
and pallet)
Mechanical downtilt (°) 0–6°

2015

2599
Radome material Fiberglass
Radome colour Light grey
2 x MQ4 Male + 1 x 4.3-10 Female (CAL)
Connector
4 x 4.3-10 Female
Connector position Bottom

315
Unit: mm

Port and Array Layout

5 6

y1 y2 y3 y4
r1 r2
1–2 3–4

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx….…Lr1 \

3–4 Rr2 690–960 HWMxxxx……Rr2 \

Ly1 1695–2690 HWMxxxx…...Ly1


5
Ry4 1695–2690 HWMxxxx…...Ry4
HWxxxx……0y1234
CLy2 1427–2690 HWMxxxx…CLy2
6
CRy3 1427–2690 HWMxxxx…CRy3

18
Product Product
List Category
A06240BA09v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x16.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE

RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (CLy2/CRy3) (Ly1/Ry4)

19
Product Product
List Category
A06240BA11v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m

Passive Module Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
At mid tilt 14.6 15.0 15.2 15.2 15.4 16.2 16.8 17.4
Gain (dBi)
Over all tilts 14.5±0.5 14.9±0.6 15.1±0.3 15.0±0.4 15.3±0.7 16.1±0.8 16.7±0.7 17.3±0.8
Side lobe suppression for first side lobe
> 15 > 16 > 16 > 16 > 16 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 69±7 69±6 64±6 69±7 65±6 62±6 58±6
Vertical 3 dB beam width (°) 10.3±0.9 9.5±0.7 9.1±0.7 8.5±0.6 10.4±0.9 9.4±0.9 8.1±0.7 7.4±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 20 > 21 > 21 > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 15 > 15 > 15 > 15 > 16 > 18 > 18 > 17
Max. effective power per port (W) ≤ 400 (at 50℃ ambient temperature)* ≤ 250(at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1517 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt 14.2 15.4 16.3 16.7 17.2
Gain (dBi)
Over all tilts 14.1±0.8 15.3±0.7 16.2±0.8 16.6±0.7 17.1±0.8
Side lobe suppression for first side lobe
> 15 > 15 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 73±8 69±6 65±5 62±6 58±6
Vertical 3 dB beam width (°) 12.2±0.7 10.2±0.9 9.2±0.9 8.2±0.5 7.3±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 16 > 16 > 18 > 18 > 17
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

20
Product Product
List Category
A06240BA11v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m

(21)
Mechanical Properties
Passive module dimensions (H x W x D)
2099 x 509 x 218
(mm)
Packing dimensions (H x W x D) (mm) 2290 x 665 x 640 (Including pallet)
Passive module weight (kg) 40.0
91.5 (Including clamps, downtilt kit and

1763
Passive module packing weight (kg)
pallet)

2099
Mechanical downtilt (°) 0–8°
Radome material Fiberglass
Radome colour Light grey
2 x MQ4 Male + 1 x 4.3–10 Female (CAL)
Connector
4 x 4.3–10 Female
Connector position Bottom

315
Unit: mm

Port and Array Layout

5 6

y1 y2 y3 y4
r1 r2
1–2 3–4

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx……Rr2

Ly1 1695–2690 HWxxxx…..Ly1


5
Ry4 1695–2690 HWxxxx…..Ry4

CLy2 1427–2690 HWxxxx...CLy2


6
CRy3 1427–2690 HWxxxx...CRy3

21
Product Product
List Category
A06240BA11v06L
Passive Module of BladeAAU
D06X-2x690-960(B)/2x1427-2690(B)/2x1695-2690(B)-6x65-2x15.5i/2x17i/2x17.5i-
6xM-R/CF
EasyRET 12-Port 2L4H Passive Module with 6 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE

RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (CLy2/CRy3) (Ly1/Ry4)

22
Product Product
List Category
ACSR (Antenna with Cabinet Suite for RRU) 2.0

Product Description

ACSR(Antenna with Cabinet Suite for RRU) is an extensible antenna solution, which can be
integrated with Huawei RRU to realize passive antenna and RRU in one box. ACSR helps operators
to deploy sub 3GHz full 4T4R by one installation in one box to simply the site configuration and
reduce TCO. With SDIF enhancement, the new ACSR 2.0 can provide extra antenna electrical
specification benefits. Also, the new structure design brings better antenna appearance and lighter
antenna weight.

ACSR 2.0 Features


Passive Antenna
 Based on Huawei advanced multi-band antennas platforms, providing future evolution
capability and best performance
 All Bands SDIF inside
 Light product weight
 Slim size with better product appearance

RRU Slot
 Support Huawei multi-band RRU to reduce boxes
 Compatible with Huawei 24L/18L/12L RRU
 Maximum 2 RRUs can be integrated with ACSR

23
Product Product
List Category
A06240RA00v06
A06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x17i/2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (LTy2/RTy4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 14.8 15.4 15.5 15.7 15.8 16.4 16.7 17.1
Gain (dBi)
Over all tilts 14.6±0.6 15.2±0.6 15.4±0.6 15.5±0.6 15.7±0.6 16.3±0.5 16.6±0.5 17.0±0.5
Side lobe suppression for first
> 15 > 16 > 16 > 17 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 67±6 61±6 64±7 63±6 62±6 58±6
Vertical 3 dB beam width (°) 10.4±0.9 9.4±0.7 9.1±0.5 8.6±0.5 10.0±0.8 9.0±0.7 8.2±0.6 7.2±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 21 > 22 > 22 > 26 > 28 > 29 > 30
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 20 > 20 > 17 > 17
Efficiency (dB) -0.75±0.2 -0.8±0.2 -0.9±0.2 -1.0±0.2 -0.8±0.15 -0.85±0.15 -0.9±0.2 -0.9±0.2
Efficiency average (%) 84 83 81 79 83 82 81 81
Max. effective power per port (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (LBy1/RBy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.8 15.7 16.3 16.6 17.0
Gain (dBi)
Over all tilts 14.7±0.8 15.6±0.6 16.2±0.6 16.5±0.6 16.9±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 64±6 61±6 59±6 58±6
Vertical 3 dB beam width (°) 11.5±0.8 10.0±0.8 9.0±0.7 8.2±0.6 7.2±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 25 > 26 > 27 > 29
Cross polar ratio, 0° (dB) > 16 > 20 > 18 > 17 > 17
Efficiency (dB) -0.7±0.15 -0.8±0.15 -0.85±0.15 -0.9±0.2 -0.9±0.2
Efficiency average (%) 85 83 82 81 81
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)

24
Product Product
List Category
A06240RA00v06
A06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x17i/2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
230

(87)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 369 x 206
Packing dimensions (H x W x D) (mm) 2420 x 560 x 460

Antenna weight (kg) 39.8


Clamps weight (kg) 8.4 (2 units)
Antenna packing weight (kg) 71.5 (Including clamps)
Mast diameter supported (mm) 60–115
Radome material Fiberglass

1844
2009
Radome colour Light grey
Operational temperature (℃) –40 to +65
Frontal: 575 (at 150 km/h)
Wind load (N) Lateral: 525 (at 150 km/h)
Maximum: 780 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 12 x 4.3-10 Female
Connector position Bottom

74
Unit: mm

Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0Z01 Mechanical downtilt: 0–8° 4.8 kg 1

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LBy1/RBy3) (LTy2/RTy4)

25
Product Product
List Category
A06240RA00v06
A06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x17i/2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Port and Array Layout

r: Red y: Yellow L: Left array


R: Right array T: Top array B: Bottom array

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx……..Lr1

3–4 Rr2 690–960 HWxxxxx….…Rr2 y2 y4

5–6 LBy1 1427–2690 HWxxxxx…..LBy1

7–8 LTy2 1695–2690 HWxxxxx…..LTy2

9–10 RBy3 1427–2690 HWxxxxx….RBy3 y1 y3

11–12 RTy4 1695–2690 HWxxxxx…..RTy4 r1 r2

26
Product Product
List Category
A06240RA00v06
A06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x17i/2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

Properties
RET type Integrated RET
RET protocols AISG 2.0/GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range)(s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 10 (8/20 μs)

Antenna with Cabinet Suite Properties

ACS Properties
RRU supported in Upper
24L/18L/12L RRU
positon
Case1: 1 Active
RRU supported in Lower
/
positon

RRU supported in Upper


24L/18L/12L RRU
positon
Case2: 2 Active
RRU supported in Lower
24L/18L/12L RRU
positon

Operational temperature (℃) –40 to +45

Total weight supported (Kg) 106 (including bracket)

Frontal: 575 (at 150 km/h)


Wind load with RRUs (N) Lateral: 525 (at 150 km/h)
Maximum: 780 (at 150 km/h)

Max. operational wind speed (km/h) 150

Survival wind speed (km/h) 200


The figure is for reference only.
The RRU is not delivered.

27
Product Product
List Category
B. Passive Antenna
Multi-band
B - 1 Low Band

2 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width(o) Downtilt(o)

690-960 65 15 0-14 EasyRET2.0 2 x 4.3-10 1415 x 298 x 149 A704515R0v06

690-960 65 16.5 0-12 EasyRET2.0 2 x 4.3-10 1936 x 298 x 149 A704516R0v06

690-960 65 17.5 0-10 EasyRET2.0 2 x 4.3-10 2535 x 298 x 149 A704517R0v06

690-960 90 16.5 0-10 EasyRET2.0 2 x 4.3-10 2695 x 259 x 135 A704516R01v06

690-960 33 20.5 0-10 EasyRET2.0 2 x 4.3-10 2580 x 590 x 169 A704521R0v06

4 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

690-960/
65/65 14.5/14.5 0-14/0-14 EasyRET2.0 4 x 4.3-10 1499 x 429 x 196 ADU4515R5v06
690-960

690-960/
65/65 16/16 0-10/0-10 EasyRET2.0 4 x 4.3-10 1999 x 429 x 196 ADU4516R6v06
690-960

690-960/
65/65 17/17 0-10/0-10 EasyRET2.0 4 x 4.3-10 2550 x 429 x 196 ADU4517R6v06
690-960

690-960/
65/65 15/15 2-12/2-12 EasyRET2.0 4 x 4.3-10 2550 x 369 x 226 ADU4515R17v06
690-960

28
Product
Category
Multi-band
B - 2 High Band

2 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

1710-2690 65 18 0-12 EasyRET2.0 2 x 4.3-10 1365 x 155 x 89 A264518R0v06

1695-2690 65 21 0-6 EasyRET2.0 2 x 4.3-10 2099 x 155 x 89 A264521R1v06

4 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

2*1695-2690 2* 65 2*16 2*0-14 EasyRET2.0 4 x 4.3-10 840 x 269 x 86 ADU4516R18v06

2*1710-2690 2*65 2*18 2*0-12 EasyRET2.0 4 x 4.3-10 1365 x 269 x 86 ADU4518R6v06

2*1695-2690 2* 65 2*21 2*0-6 EasyRET2.0 4 x 4.3-10 2099 x 269 x 86 ADU4521R0v06

2*1710-2690 2*65 2*21 2*0-10 EasyRET2.0 4 x 4.3-10 1399 x 449 x 196 ADU4521R3v06

6 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

3*1710-2690 3*65 3*18 3*0-12 EasyRET2.0 6 x 4.3-10 1365 x 376 x 99 ATR4518R14v06

8 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

4*1710-2690 4*65 4*18 4*0-12 EasyRET2.0 8 x 4.3-10 1499 x 449 x 115 AQU4518R21v06

29
Product
Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable

At mid tilt 13.9 14.4 14.6 14.8


Gain (dBi)
Over all tilts 13.9±0.3 14.3±0.3 14.5±0.3 14.7±0.4

Side lobe suppression for first


> 15 > 15 > 15 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 69±1.4 68±1.0 67±1.0 65±2.0

Vertical 3 dB beam width (°) 16.4±1.0 15.0±1.0 14.5±0.7 13.2±0.9

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25

Cross polar ratio, 0° (dB) > 17 > 17 > 17 > 17

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68

(87)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1415 x 298 x 150

Packing dimensions (H x W x D) (mm) 1835 x 360 x 225

Antenna weight (kg) 12.3

Antenna packing weight (kg) 21.7 (Including clamps)

Radome material Fiberglass


1415
1280

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 440 (at 150 km/h)


Wind load (N) Lateral: 239 (at 150 km/h)
Maximum: 501 (at 150 km/h)

Max. operational wind speed (km/h) 200


48

Survival wind speed (km/h) 250


Unit: mm

30
Product Product
List Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2

r : Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

31
Product Product
List Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

32
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable
At mid tilt 15.5 15.9 16.1 16.4
Gain (dBi)
Over all tilts 15.4±0.3 15.7±0.4 15.9±0.5 16.1±0.5
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±1.0 68±1.2 67±1.2 65±1.8
Vertical 3 dB beam width (°) 11.3±0.8 10.3±0.5 9.8±0.6 9.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1936 x 298 x 149

(588)
Packing dimensions (H x W x D) (mm) 2365 x 360 x 230
Antenna weight (kg) 15.3
Antenna packing weight (kg) 26.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey 1936
1300

Operational temperature (℃) –40 to +65


Frontal: 602 (at 150 km/h)
Wind load (N) Lateral: 327 (at 150 km/h)
Maximum: 685 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 2 x 4.3-10 Female
Connector position Bottom
48

Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

33
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r : Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx……..r

34
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

35
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable

At mid tilt 16.5 16.7 17.0 17.2


Gain (dBi)
Over all tilts 16.4±0.3 16.6±0.4 16.7 ±0.4 16.9 ±0.5

Side lobe suppression for first side


> 17 > 18 > 18 > 17
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 69±1.0 68±1.2 67±1.2 65±2.0

Vertical 3 dB beam width (°) 8.7±0.6 8.0±0.5 7.7±0.4 7.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2535 x 298 x 149

Packing dimensions (H x W x D) (mm) 2910 x 375 x 200 (613)


Antenna weight (kg) 19.3

Antenna packing weight (kg) 27.3 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female


2535
1874

Connector position Bottom

Frontal: 788 (at 150 km/h)


Wind load (N) Lateral: 429 (at 150 km/h)
Maximum: 898 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


48

Unit: mm

36
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

37
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

38
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications

Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable
At mid tilt 15.5 15.8 16.1 16.3
Gain (dBi)
Over all tilts 15.3±0.5 15.7±0.6 16.0±0.6 16.1±0.6
Side lobe suppression for first
> 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 90±3 89±3 88±3 87±3
Vertical 3 dB beam width (°) 8.6±0.7 7.9±0.5 7.5±0.3 7.1±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 24
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 259 x 135
Packing dimensions (H x W x D) (mm) 3065 x 345 x 195
756.5

Antenna weight (kg) 18.3


Antenna packing weight (kg) 28.7 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2695

Operational temperature (℃) –40 to +65


Frontal: 737 (at 150 km/h)
Wind load (N) Lateral: 395 (at 150 km/h)
Maximum: 844 (at 150 km/h)
1885

Max. operational wind speed (km/h) 200


Survival wind speed (km/h) 250
Connector 2 x 4.3-10 Female
53.5

Connector position Bottom


Unit: mm

39
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r
r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx……..r

40
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

41
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable

At mid tilt 19.1 19.7 20.0 20.3


Gain (dBi)
Over all tilts 19.0±0.5 19.6±0.4 19.9±0.5 20.2±0.3

Side lobe suppression for first side


> 19 > 21 > 21 > 19
lobe above main beam (dB)

Azimuth side lobe suppression(dB) > 18 > 18 > 19 > 19

Horizontal 3 dB beam width (°) 35±1.5 32.5±1.0 31.5±1.5 29±1.0

Vertical 3 dB beam width (°) 8.8±0.5 8.0±0.5 7.7±0.3 7.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 28 ≥ 30

Front to back ratio, ±30° (dB) > 32 > 35 > 33 > 32

Cross polar ratio, 0° (dB) > 21 > 28 > 26 > 24

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2580 x 590 x 169
(599)
Packing dimensions (H x W x D) (mm) 2875 x 740 x 300

Antenna weight (kg) 44.8

Antenna packing weight (kg) 64.7 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


2580
1888

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 1625 (at 150 km/h)


Wind load (N) Lateral: 480 (at 150 km/h)
Maximum: 1625 (at 150 km/h)

Max. operational wind speed (km/h) 200


93

Survival wind speed (km/h) 250


Unit: mm

42
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r
r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

43
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

44
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable, each band separately

At mid tilt 13.8 14.2 14.4 14.5


Gain (dBi)
Over all tilts 13.7±0.5 14.1±0.5 14.3±0.5 14.4±0.5

Side lobe suppression for first


> 15 > 17 > 17 > 16
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 66±5 63±5 62±5 60±5

Vertical 3 dB beam width (°) 15.3±1.2 14.0±1.1 13.3±1.0 12.2±0.8

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 24 > 24 > 25

Cross polar ratio, 0° (dB) > 16 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties

Antenna dimensions (H x W x D) (mm) 1499 x 429 x 196

(66)
Packing dimensions (H x W x D) (mm) 1695 x 530 x 270

Antenna weight (kg) 22.4

Antenna packing weight (kg) 34.4 (Including clamps)

Radome material Fiberglass


1376
1499

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 381 (at 150 km/h)


Wind load (N) Lateral: 323 (at 150 km/h)
Maximum: 581 (at 150 km/h)
57

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Unit: mm

45
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2

L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

46
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

47
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable, each band separately

At mid tilt 15.0 15.5 15.8 16.0


Gain (dBi)
Over all tilts 14.8±0.5 15.3±0.5 15.6±0.5 15.8±0.5

Side lobe suppression for first side


> 16 > 17 > 17 > 17
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5

Vertical 3 dB beam width (°) 10.5±0.9 9.5±0.8 9.2±0.7 8.5±0.7

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 429 x 196
(669)
Packing dimensions (H x W x D) (mm) 2270 x 515 x 235

Antenna weight (kg) 27.0

Antenna packing weight (kg) 39.1 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


1273
1999

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 509 (at 150 km/h)


Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 774 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


57

Unit: mm

48
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2
L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

49
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

50
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable, each band separately

At mid tilt 15.8 16.4 16.7 17.2


Gain (dBi)
Over all tilts 15.5±0.5 16.2±0.5 16.4±0.5 16.9±0.5

Side lobe suppression for first


> 16 > 17 > 17 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5

Vertical 3 dB beam width (°) 8.8±0.7 8.0±0.6 7.8±0.5 7.5±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 429 x 196

Packing dimensions (H x W x D) (mm) 2810 x 515 x 235 (706)

Antenna weight (kg) 32.0

Antenna packing weight (kg) 46.5 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female


1787
2550

Connector position Bottom

Frontal: 649 (at 150 km/h)


Wind load (N) Lateral: 549 (at 150 km/h)
Maximum: 988 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


57

Unit: mm

51
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2
L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

52
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

53
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 14.4 14.7 15.0 15.5


Gain (dBi)
Over all tilts 14.3±0.5 14.6±0.5 14.9±0.5 15.4±0.5

Side lobe suppression for first side


> 16 > 16 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 93±8 89±7 88±6 84±6
Vertical 3 dB beam width (°) 8.9±0.7 8.0±0.5 7.7±0.4 7.3±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 20 > 21 > 21 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)


Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 369 x 226

Packing dimensions (H x W x D) (mm) 2945 x 455 x 275 (587)

Antenna weight (kg) 28.5

Antenna packing weight (kg) 46.3 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


1900

2550

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 460 (at 150 km/h)


Wind load (N) Lateral: 324 (at 150 km/h)
Maximum: 792 (at 150 km/h)

Max. operational wind speed (km/h) 200


63

Survival wind speed (km/h) 250


Unit: mm

54
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2

L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

55
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

56
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Specifications
Electrical Properties
1710–2690 (y)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable
At mid tilt 17.4 18.0 18.5 18.6
Gain (dBi)
Over all tilts 17.2±0.3 17.6±0.5 18.3±0.4 18.4±0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±2.0 65±2.4 62±2.7 60±1.5
Vertical 3 dB beam width (°) 6.8±0.4 6.1±0.4 5.5±0.4 5.0±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 28 > 29 > 29 > 29
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
64

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1365 x 155 x 89

Packing dimensions (H x W x D) (mm) 1695 x 195 x 155

Antenna weight (kg) 7.0

Antenna packing weight (kg) 11.6 (including clamps)

Radome material Fiberglass

Radome colour Light grey


1392
1365

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 227 (at 150 km/h)


Wind load (N) Lateral: 116 (at 150 km/h)
Maximum: 257 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Unit: mm

57
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-A ASMC00012 2.1 kg 1
mast diameter: 38–115 mm

Downtilt kit-A ASMDT0A01 Mechanical downtilt: 0–12° 0.6 kg 1 (Separate packing)

Port and Array Layout

1–2

y: Yellow

Port Array Freq(MHz) RET S/N


1–2 y 1710–2690 HWxxxxx…….. y

58
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz
(y)

59
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Specifications
Electrical Properties
1695–2690 (y1)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–6, continuously adjustable

At mid tilt 19.8 20.3 20.7 21.0


Gain (dBi)
Over all tilts 19.8±0.5 20.3±0.5 20.7±0.5 21.0±0.5

Side lobe suppression for first


> 18 > 17 > 17 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±4 65±3 61±2 59±4

Vertical 3 dB beam width (°) 4.4±0.4 4.0±0.4 3.5±0.2 3.3±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 155 x 89
801

Packing dimensions (H x W x D) (mm) 2515 x 210 x 170

Antenna weight (kg) 9.8

Antenna packing weight (kg) 17.2 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


2130

Operational temperature (℃) –40 to +65


2099

Connector 2 x 4.3-10 Female

Connector position Bottom


1310

Frontal: 349 (at 150 km/h)


Wind load (N) Lateral: 178 (at 150 km/h)
Maximum: 395 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

Unit: mm

60
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm

Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–12° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2

y1

y: Yellow

Port Array Freq(MHz) RET S/N


1–2 y1 1695–2690 HWxxxxx……..y1

61
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz
(y1)

62
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m
Antenna Specifications

Electrical Properties
2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable, each band separately

At mid tilt 15.7 16.2 16.5 16.7


Gain (dBi)
Over all tilts 15.5±0.5 16.0±0.5 16.5±0.5 16.5±0.5
Side lobe suppression for first side
> 18 > 18 > 18 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±5 64±5 62±4 60±4

Vertical 3 dB beam width (°) 11.7±0.9 10.6±0.8 9.5±0.5 8.4±0.6

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Interband isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 28 > 28 > 28 > 28

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties 68

(58)
Antenna dimensions (H x W x D) (mm) 840 x 269 x 86

Packing dimensions (H x W x D) (mm) 1185 x 360 x 145

Antenna weight (kg) 9.6

Antenna packing weight (kg) 15.9 (Including clamps)


748
840

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 211 (at 150 km/h)


Wind load (N) Lateral: 70 (at 150 km/h)
Maximum: 253 (at 150 km/h)
62

Max. operational wind speed (km/h) 200


Unit: mm
Survival wind speed (km/h) 250

63
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–20° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1695–2690 HWxxxx…….Ly1

3–4 Ry2 1695–2690 HWxxxx…….Ry2

64
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz 1695–2690 MHz


(Ly1) (Ry2)

65
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications

Electrical Properties
2 x (1710–2690) (Ly1/Ry2)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–12, continuously adjustable, each band separately

At mid tilt 17.4 17.9 18.2 18.4


Gain (dBi)
Over all tilts 17.3±0.3 17.7±0.4 18.0±0.3 18.2±0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±2.7 65±2.7 63±2.8 61±2.6

Vertical 3 dB beam width (°) 6.9±0.3 6.3±0.3 5.5±0.3 5.0±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Interband isolation (dB) ≥ 30 (1710–2690 MHz and 1710–2690 MHz)

Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties

(45)
Antenna dimensions (H x W x D) (mm) 1365 x 269 x 86

Packing dimensions (H x W x D) (mm) 1720 x 360 x 140

Antenna weight (kg) 11.3

Antenna packing weight (kg) 18.3 (includimg clamps)

Radome material Fiberglass

Radome colour Light grey


1365
1274

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 359 (at 150 km/h)


Wind load (N) Lateral: 114 (at 150 km/h)
Maximum: 410 (at 150 km/h)

Max. operational wind speed (km/h) 200


46

Survival wind speed (km/h) 250

Unit: mm

66
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx….…. Ly1

3–4 Ry2 1710–2690 HWxxxxx…….. Ry2

67
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz


(Ly1) (Ry2)

68
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m
Antenna Specifications

Electrical Properties
2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–6, continuously adjustable, each band separately
At mid tilt 20.0 20.5 20.7 21.0
Gain (dBi)
Over all tilts 20.0±0.5 20.5±0.5 20.7±0.5 21.0±0.5
Side lobe suppression for first
> 18 > 17 > 17 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±4 62±3 60±3 58±5
Vertical 3 dB beam width (°) 4.4±0.4 4.0±0.4 3.5±0.2 3.3±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 269 x 86

Packing dimensions (H x W x D) (mm) (743)


2415 x 340 x 160

Antenna weight (kg) 16.2

Antenna packing weight (kg) 25.4 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65


2099
1310

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 553 (at 150 km/h)


Wind load (N) Lateral: 175 (at 150 km/h)
Maximum: 631 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


46

Unit: mm

69
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm

Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1695–2690 HWxxxxx….…. Ly1

3–4 Ry2 1695–2690 HWxxxxx…….. Ry2

70
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz
(Ly1/Ry2)

71
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
2 x (1710–2690) (Ly1/Ry2)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately
At mid tilt 20.1 20.2 20.4 20.6
Gain (dBi)
Over all tilts 20.0±0.9 20.1±0.8 20.3±0.6 20.5±0.6
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±4 34±4 30±4 28±4
Vertical 3 dB beam width (°) 7.0±0.5 6.3±0.5 5.6±0.5 5.1±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 15 > 15 > 15 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole
700 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties
68

(67)
Antenna dimensions (H x W x D) (mm) 1399 x 449 x 196

Packing dimensions (H x W x D) (mm) 1665 x 535 x 250

Antenna weight (kg) 20.0

Antenna packing weight (kg) 31.1 (Including clamps)

Radome material Fiberglass


1273
1399

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 415 (at 150 km/h)


Wind load (N) Lateral: 315 (at 150 km/h)
Maximum: 562 (at 150 km/h)
59

Max. operational wind speed (km/h) 200


Unit: mm
Survival wind speed (km/h) 250

72
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm

Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4
y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx….…. Ly1

3–4 Ry2 1710–2690 HWxxxxx…….. Ry2

73
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz
(Ly1/Ry2)

74
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Antenna Specifications
Electrical Properties
3 x (1710–2690) (Ly1/Cy2/Ry3)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable, each band separately
At mid tilt 17.6 18.0 18.4 18.6
Gain (dBi)
Over all tilts 17.4±0.4 17.8±0.4 18.1±0.4 18.3±0.5
Side lobe suppression for first side lobe
> 19 > 22 > 20 > 19
above main beam (dB)
Horizontal 3 dB beam width (°) 66±5.5 65±4.2 64±3.8 60±3.2
Vertical 3 dB beam width (°) 6.7±0.5 6.1±0.3 5.4±0.4 5.0±0.2
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 27 > 27 > 29 > 29
Cross polar ratio, 0° (dB) > 26 > 25 > 23 > 23
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68

(51)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1365 x 376 x 99
Packing dimensions (H x W x D) (mm) 1730 x 470 x 165
Antenna weight (kg) 16.0
Antenna packing weight (kg) 26 (including clamps)
Radome material Fiberglass
Radome colour Light grey
1262
1365

Operational temperature (℃) –40 to +65


Connector 6 x 4.3-10 Female
Connector position Bottom
Frontal: 664 (at 150 km/h)
Wind load (N) Lateral: 139 (at 150 km/h)
Maximum: 664 (at 150 km/h)
Max. operational wind speed (km/h) 200
52

Survival wind speed (km/h) 250


Unit: mm

75
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm

Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

3–4

1–2 5–6

y1 y2 y3
L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx……Ly1

3–4 Cy2 1710–2690 HWxxxxx……Cy2

5–6 Ry3 1710–2690 HWxxxxx…..Ry3

76
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz 1710–2690 MHz


(Ly1) (Cy2) (Ry3)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

77
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Antenna Specifications

Electrical Properties
4 x (1710–2690) (Ly1/CLy2/CRy3/Ry4)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable, each band separately
At mid tilt 17.4 17.7 17.9 18.3
Gain (dBi)
Over all tilts 17.2±0.5 17.5±0.5 17.7±0.5 18.0±0.5
Side lobe suppression for first side lobe
> 18 > 18 > 19 > 20
above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 64±5 61±5 60±5
Vertical 3 dB beam width (°) 6.8±0.5 6.1±0.4 5.4±0.4 5.0±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28 (1710–2690 MHz and 1710–2690 MHz)
Front to back ratio, ±30° (dB) > 27 > 28 > 28 > 28
Cross polar ratio, 0° (dB) > 22 > 22 > 22 > 23
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 800 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties
68

(57)
Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115
Packing dimensions (H x W x D) (mm) 1885 x 535 x 180
Antenna weight (kg) 23.0
Antenna packing weight (kg) 32.0 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1499
1385

Operational temperature (℃) –40 to +65


Frontal: 721 (at 150 km/h)
Wind load (N) Lateral: 106 (at 150 km/h)
Maximum: 721 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
57

Connector position Bottom


Unit: mm

78
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

3–4 5–6

1–2 7–8

L: Left array C: Center array y1 y2 y3 y4


R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxx……….Ly1

3–4 CLy2 1710–2690 HWxxxx…....CLy2

5–6 CRy3 1710–2690 HWxxxx……CRy3

7–8 Ry4 1710–2690 HWxxxx…......Ry4

79
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety–Equipment installed outdoor), EN 55032 (Emission),


EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz


(Ly1/Ry4) (CLy2/CRy3)

80
Product Product
List Category
B. Passive Antenna
Multi-band
B - 1 Low Band

2 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width(o) Downtilt(o)

690-960 65 15 0-14 EasyRET2.0 2 x 4.3-10 1415 x 298 x 149 A704515R0v06 83

690-960 65 16.5 0-12 EasyRET2.0 2 x 4.3-10 1936 x 298 x 149 A704516R0v06 86

690-960 65 17.5 0-10 EasyRET2.0 2 x 4.3-10 2535 x 298 x 149 A704517R0v06 89

690-960 90 16.5 0-10 EasyRET2.0 2 x 4.3-10 2695 x 259 x 135 A704516R01v06 92

690-960 33 20.5 0-10 EasyRET2.0 2 x 4.3-10 2580 x 590 x 169 A704521R0v06 95

4 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

690-960/
690-960
65/65 14.5/14.5 0-14/0-14 EasyRET2.0 4 x 4.3-10 1499 x 429 x 196 ADU4515R5v06 98

690-960/
690-960
65/65 16/16 0-10/0-10 EasyRET2.0 4 x 4.3-10 1999 x 429 x 196 ADU4516R6v06 101

690-960/
690-960
65/65 17/17 0-10/0-10 EasyRET2.0 4 x 4.3-10 2550 x 429 x 196 ADU4517R6v06 104

690-960/
690-960
65/65 15/15 2-12/2-12 EasyRET2.0 4 x 4.3-10 2550 x 369 x 226 ADU4515R17v06 107

81
Product
Category
Multi-band
B - 2 High Band

2 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

1710-2690 65 18 0-12 EasyRET2.0 2 x 4.3-10 1365 x 155 x 89 A264518R0v06 110


1695-2690 65 21 0-6 EasyRET2.0 2 x 4.3-10 2099 x 155 x 89 A264521R1v06 113

4 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

2*1695-2690 2* 65 2*16 2*0-14 EasyRET2.0 4 x 4.3-10 840 x 269 x 86 ADU4516R18v06 116


2*1710-2690 2*65 2*18 2*0-12 EasyRET2.0 4 x 4.3-10 1365 x 269 x 86 ADU4518R6v06 119
2*1695-2690 2* 65 2*21 2*0-6 EasyRET2.0 4 x 4.3-10 2099 x 269 x 86 ADU4521R0v06 122
2*1710-2690 2*65 2*21 2*0-10 EasyRET2.0 4 x 4.3-10 1399 x 449 x 196 ADU4521R3v06 125

6 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

3*1710-2690 3*65 3*18 3*0-12 EasyRET2.0 6 x 4.3-10 1365 x 376 x 99 ATR4518R14v06 128

8 Ports

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

4*1710-2690 4*65 4*18 4*0-12 EasyRET2.0 8 x 4.3-10 1499 x 449 x 115 AQU4518R21v06 131

82
Product
Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable

At mid tilt 13.9 14.4 14.6 14.8


Gain (dBi)
Over all tilts 13.9±0.3 14.3±0.3 14.5±0.3 14.7±0.4

Side lobe suppression for first


> 15 > 15 > 15 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 69±1.4 68±1.0 67±1.0 65±2.0

Vertical 3 dB beam width (°) 16.4±1.0 15.0±1.0 14.5±0.7 13.2±0.9

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25

Cross polar ratio, 0° (dB) > 17 > 17 > 17 > 17

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68

(87)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1415 x 298 x 150

Packing dimensions (H x W x D) (mm) 1835 x 360 x 225

Antenna weight (kg) 12.3

Antenna packing weight (kg) 21.7 (Including clamps)

Radome material Fiberglass


1415
1280

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 440 (at 150 km/h)


Wind load (N) Lateral: 239 (at 150 km/h)
Maximum: 501 (at 150 km/h)

Max. operational wind speed (km/h) 200


48

Survival wind speed (km/h) 250


Unit: mm

83
Product Product
List Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2

r : Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

84
Product Product
List Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

85
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable
At mid tilt 15.5 15.9 16.1 16.4
Gain (dBi)
Over all tilts 15.4±0.3 15.7±0.4 15.9±0.5 16.1±0.5
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±1.0 68±1.2 67±1.2 65±1.8
Vertical 3 dB beam width (°) 11.3±0.8 10.3±0.5 9.8±0.6 9.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1936 x 298 x 149

(588)
Packing dimensions (H x W x D) (mm) 2365 x 360 x 230
Antenna weight (kg) 15.3
Antenna packing weight (kg) 26.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey 1936
1300

Operational temperature (℃) –40 to +65


Frontal: 602 (at 150 km/h)
Wind load (N) Lateral: 327 (at 150 km/h)
Maximum: 685 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 2 x 4.3-10 Female
Connector position Bottom
48

Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

86
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r : Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx……..r

87
Product Product
List Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

88
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable

At mid tilt 16.5 16.7 17.0 17.2


Gain (dBi)
Over all tilts 16.4±0.3 16.6±0.4 16.7 ±0.4 16.9 ±0.5

Side lobe suppression for first side


> 17 > 18 > 18 > 17
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 69±1.0 68±1.2 67±1.2 65±2.0

Vertical 3 dB beam width (°) 8.7±0.6 8.0±0.5 7.7±0.4 7.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2535 x 298 x 149

Packing dimensions (H x W x D) (mm) 2910 x 375 x 200 (613)


Antenna weight (kg) 19.3

Antenna packing weight (kg) 27.3 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female


2535
1874

Connector position Bottom

Frontal: 788 (at 150 km/h)


Wind load (N) Lateral: 429 (at 150 km/h)
Maximum: 898 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


48

Unit: mm

89
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

90
Product Product
List Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

91
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications

Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable
At mid tilt 15.5 15.8 16.1 16.3
Gain (dBi)
Over all tilts 15.3±0.5 15.7±0.6 16.0±0.6 16.1±0.6
Side lobe suppression for first
> 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 90±3 89±3 88±3 87±3
Vertical 3 dB beam width (°) 8.6±0.7 7.9±0.5 7.5±0.3 7.1±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 24
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 259 x 135
Packing dimensions (H x W x D) (mm) 3065 x 345 x 195
756.5

Antenna weight (kg) 18.3


Antenna packing weight (kg) 28.7 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2695

Operational temperature (℃) –40 to +65


Frontal: 737 (at 150 km/h)
Wind load (N) Lateral: 395 (at 150 km/h)
Maximum: 844 (at 150 km/h)
1885

Max. operational wind speed (km/h) 200


Survival wind speed (km/h) 250
Connector 2 x 4.3-10 Female
53.5

Connector position Bottom


Unit: mm

92
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r
r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx……..r

93
Product Product
List Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

94
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable

At mid tilt 19.1 19.7 20.0 20.3


Gain (dBi)
Over all tilts 19.0±0.5 19.6±0.4 19.9±0.5 20.2±0.3

Side lobe suppression for first side


> 19 > 21 > 21 > 19
lobe above main beam (dB)

Azimuth side lobe suppression(dB) > 18 > 18 > 19 > 19

Horizontal 3 dB beam width (°) 35±1.5 32.5±1.0 31.5±1.5 29±1.0

Vertical 3 dB beam width (°) 8.8±0.5 8.0±0.5 7.7±0.3 7.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 28 ≥ 30

Front to back ratio, ±30° (dB) > 32 > 35 > 33 > 32

Cross polar ratio, 0° (dB) > 21 > 28 > 26 > 24

Max. effective power per port (W) 500 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2580 x 590 x 169
(599)
Packing dimensions (H x W x D) (mm) 2875 x 740 x 300

Antenna weight (kg) 44.8

Antenna packing weight (kg) 64.7 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


2580
1888

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 1625 (at 150 km/h)


Wind load (N) Lateral: 480 (at 150 km/h)
Maximum: 1625 (at 150 km/h)

Max. operational wind speed (km/h) 200


93

Survival wind speed (km/h) 250


Unit: mm

95
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2

r
r: Red

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx…….. r

96
Product Product
List Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET 2-Port Low-Band Antenna with 1 Integrated RCU – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(r)

97
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable, each band separately

At mid tilt 13.8 14.2 14.4 14.5


Gain (dBi)
Over all tilts 13.7±0.5 14.1±0.5 14.3±0.5 14.4±0.5

Side lobe suppression for first


> 15 > 17 > 17 > 16
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 66±5 63±5 62±5 60±5

Vertical 3 dB beam width (°) 15.3±1.2 14.0±1.1 13.3±1.0 12.2±0.8

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 24 > 24 > 25

Cross polar ratio, 0° (dB) > 16 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties

Antenna dimensions (H x W x D) (mm) 1499 x 429 x 196

(66)
Packing dimensions (H x W x D) (mm) 1695 x 530 x 270

Antenna weight (kg) 22.4

Antenna packing weight (kg) 34.4 (Including clamps)

Radome material Fiberglass


1376
1499

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 381 (at 150 km/h)


Wind load (N) Lateral: 323 (at 150 km/h)
Maximum: 581 (at 150 km/h)
57

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Unit: mm

98
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2

L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

99
Product Product
List Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

100
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable, each band separately

At mid tilt 15.0 15.5 15.8 16.0


Gain (dBi)
Over all tilts 14.8±0.5 15.3±0.5 15.6±0.5 15.8±0.5

Side lobe suppression for first side


> 16 > 17 > 17 > 17
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5

Vertical 3 dB beam width (°) 10.5±0.9 9.5±0.8 9.2±0.7 8.5±0.7

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 429 x 196
(669)
Packing dimensions (H x W x D) (mm) 2270 x 515 x 235

Antenna weight (kg) 27.0

Antenna packing weight (kg) 39.1 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


1273
1999

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 509 (at 150 km/h)


Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 774 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


57

Unit: mm

101
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2
L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

102
Product Product
List Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

103
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable, each band separately

At mid tilt 15.8 16.4 16.7 17.2


Gain (dBi)
Over all tilts 15.5±0.5 16.2±0.5 16.4±0.5 16.9±0.5

Side lobe suppression for first


> 16 > 17 > 17 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5

Vertical 3 dB beam width (°) 8.8±0.7 8.0±0.6 7.8±0.5 7.5±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 28


Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 24 > 25 > 26
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 429 x 196

Packing dimensions (H x W x D) (mm) 2810 x 515 x 235 (706)

Antenna weight (kg) 32.0

Antenna packing weight (kg) 46.5 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female


1787
2550

Connector position Bottom

Frontal: 649 (at 150 km/h)


Wind load (N) Lateral: 549 (at 150 km/h)
Maximum: 988 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


57

Unit: mm

104
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2
L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

105
Product Product
List Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 4-Port 2L Antenna with 2 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

106
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 14.4 14.7 15.0 15.5


Gain (dBi)
Over all tilts 14.3±0.5 14.6±0.5 14.9±0.5 15.4±0.5

Side lobe suppression for first side


> 16 > 16 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 93±8 89±7 88±6 84±6
Vertical 3 dB beam width (°) 8.9±0.7 8.0±0.5 7.7±0.4 7.3±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 20 > 21 > 21 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 400 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)


Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 369 x 226

Packing dimensions (H x W x D) (mm) 2945 x 455 x 275 (587)

Antenna weight (kg) 28.5

Antenna packing weight (kg) 46.3 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


1900

2550

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 460 (at 150 km/h)


Wind load (N) Lateral: 324 (at 150 km/h)
Maximum: 792 (at 150 km/h)

Max. operational wind speed (km/h) 200


63

Survival wind speed (km/h) 250


Unit: mm

107
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

r1 r2

L: Left array R: Right array r: Red

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxxx….….Lr1

3–4 Rr2 690–960 HWxxxxx……..Rr2

108
Product Product
List Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 4-Port 2L Antenna with Integrated RCUs–2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

690–960 MHz
(Lr1/Rr2)

109
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Specifications
Electrical Properties
1710–2690 (y)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable
At mid tilt 17.4 18.0 18.5 18.6
Gain (dBi)
Over all tilts 17.2±0.3 17.6±0.5 18.3±0.4 18.4±0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±2.0 65±2.4 62±2.7 60±1.5
Vertical 3 dB beam width (°) 6.8±0.4 6.1±0.4 5.5±0.4 5.0±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 28 > 29 > 29 > 29
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
64

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1365 x 155 x 89

Packing dimensions (H x W x D) (mm) 1695 x 195 x 155

Antenna weight (kg) 7.0

Antenna packing weight (kg) 11.6 (including clamps)

Radome material Fiberglass

Radome colour Light grey


1392
1365

Operational temperature (℃) –40 to +65

Connector 2 x 4.3-10 Female

Connector position Bottom

Frontal: 227 (at 150 km/h)


Wind load (N) Lateral: 116 (at 150 km/h)
Maximum: 257 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Unit: mm

110
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-A ASMC00012 2.1 kg 1
mast diameter: 38–115 mm

Downtilt kit-A ASMDT0A01 Mechanical downtilt: 0–12° 0.6 kg 1 (Separate packing)

Port and Array Layout

1–2

y: Yellow

Port Array Freq(MHz) RET S/N


1–2 y 1710–2690 HWxxxxx…….. y

111
Product Product
List Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz
(y)

112
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Specifications
Electrical Properties
1695–2690 (y1)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–6, continuously adjustable

At mid tilt 19.8 20.3 20.7 21.0


Gain (dBi)
Over all tilts 19.8±0.5 20.3±0.5 20.7±0.5 21.0±0.5

Side lobe suppression for first


> 18 > 17 > 17 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±4 65±3 61±2 59±4

Vertical 3 dB beam width (°) 4.4±0.4 4.0±0.4 3.5±0.2 3.3±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.
106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 155 x 89
801

Packing dimensions (H x W x D) (mm) 2515 x 210 x 170

Antenna weight (kg) 9.8

Antenna packing weight (kg) 17.2 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


2130

Operational temperature (℃) –40 to +65


2099

Connector 2 x 4.3-10 Female

Connector position Bottom


1310

Frontal: 349 (at 150 km/h)


Wind load (N) Lateral: 178 (at 150 km/h)
Maximum: 395 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

Unit: mm

113
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm

Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–12° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2

y1

y: Yellow

Port Array Freq(MHz) RET S/N


1–2 y1 1695–2690 HWxxxxx……..y1

114
Product Product
List Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET 2-Port High-Band Antenna with 1 Integrated RCU – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz
(y1)

115
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m
Antenna Specifications

Electrical Properties
2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–14, continuously adjustable, each band separately

At mid tilt 15.7 16.2 16.5 16.7


Gain (dBi)
Over all tilts 15.5±0.5 16.0±0.5 16.5±0.5 16.5±0.5
Side lobe suppression for first side
> 18 > 18 > 18 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±5 64±5 62±4 60±4

Vertical 3 dB beam width (°) 11.7±0.9 10.6±0.8 9.5±0.5 8.4±0.6

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Interband isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 28 > 28 > 28 > 28

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties 68

(58)
Antenna dimensions (H x W x D) (mm) 840 x 269 x 86

Packing dimensions (H x W x D) (mm) 1185 x 360 x 145

Antenna weight (kg) 9.6

Antenna packing weight (kg) 15.9 (Including clamps)


748
840

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 221 (at 150 km/h)


Wind load (N) Lateral: 70 (at 150 km/h)
Maximum: 253 (at 150 km/h)
62

Max. operational wind speed (km/h) 200


Unit: mm
Survival wind speed (km/h) 250

116
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–20° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1695–2690 HWxxxx…….Ly1

3–4 Ry2 1695–2690 HWxxxx…….Ry2

117
Product Product
List Category
ADU4516R18v06
D02X-2x1695-2690-2x65-2x16i-2xM-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 0.8 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz 1695–2690 MHz


(Ly1) (Ry2)

118
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications

Electrical Properties
2 x (1710–2690) (Ly1/Ry2)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–12, continuously adjustable, each band separately

At mid tilt 17.4 17.9 18.2 18.4


Gain (dBi)
Over all tilts 17.3±0.3 17.7±0.4 18.0±0.3 18.2±0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±2.7 65±2.7 63±2.8 61±2.6

Vertical 3 dB beam width (°) 6.9±0.3 6.3±0.3 5.5±0.3 5.0±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 30

Interband isolation (dB) ≥ 30 (1710–2690 MHz and 1710–2690 MHz)

Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20

Max. effective power per port (W) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties

(45)
Antenna dimensions (H x W x D) (mm) 1365 x 269 x 86

Packing dimensions (H x W x D) (mm) 1720 x 360 x 140

Antenna weight (kg) 11.3

Antenna packing weight (kg) 18.3 (includimg clamps)

Radome material Fiberglass

Radome colour Light grey


1365
1274

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 359 (at 150 km/h)


Wind load (N) Lateral: 114 (at 150 km/h)
Maximum: 410 (at 150 km/h)

Max. operational wind speed (km/h) 200


46

Survival wind speed (km/h) 250

Unit: mm

119
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx….…. Ly1

3–4 Ry2 1710–2690 HWxxxxx…….. Ry2

120
Product Product
List Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz


(Ly1) (Ry2)

121
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m
Antenna Specifications

Electrical Properties
2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–6, continuously adjustable, each band separately
At mid tilt 20.0 20.5 20.7 21.0
Gain (dBi)
Over all tilts 20.0±0.5 20.5±0.5 20.7±0.5 21.0±0.5
Side lobe suppression for first
> 18 > 17 > 17 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±4 62±3 60±3 58±5
Vertical 3 dB beam width (°) 4.4±0.4 4.0±0.4 3.5±0.2 3.3±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 269 x 86

Packing dimensions (H x W x D) (mm) (743)


2415 x 340 x 160

Antenna weight (kg) 16.2

Antenna packing weight (kg) 25.4 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65


2099
1310

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 553 (at 150 km/h)


Wind load (N) Lateral: 175 (at 150 km/h)
Maximum: 631 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


46

Unit: mm

122
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm

Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1695–2690 HWxxxxx….…. Ly1

3–4 Ry2 1695–2690 HWxxxxx…….. Ry2

123
Product Product
List Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1695–2690 MHz
(Ly1/Ry2)

124
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
2 x (1710–2690) (Ly1/Ry2)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately
At mid tilt 20.1 20.2 20.4 20.6
Gain (dBi)
Over all tilts 20.0±0.9 20.1±0.8 20.3±0.6 20.5±0.6
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±4 34±4 30±4 28±4
Vertical 3 dB beam width (°) 7.0±0.5 6.3±0.5 5.6±0.5 5.1±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 15 > 15 > 15 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole
700 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties
68

(67)
Antenna dimensions (H x W x D) (mm) 1399 x 449 x 196

Packing dimensions (H x W x D) (mm) 1665 x 535 x 250

Antenna weight (kg) 20.0

Antenna packing weight (kg) 31.1 (Including clamps)

Radome material Fiberglass


1273
1399

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 415 (at 150 km/h)


Wind load (N) Lateral: 315 (at 150 km/h)
Maximum: 562 (at 150 km/h)
59

Max. operational wind speed (km/h) 200


Unit: mm
Survival wind speed (km/h) 250

125
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm

Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4
y1 y2

L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx….…. Ly1

3–4 Ry2 1710–2690 HWxxxxx…….. Ry2

126
Product Product
List Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 4-Port 2H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz
(Ly1/Ry2)

127
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Antenna Specifications
Electrical Properties
3 x (1710–2690) (Ly1/Cy2/Ry3)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable, each band separately
At mid tilt 17.6 18.0 18.4 18.6
Gain (dBi)
Over all tilts 17.4±0.4 17.8±0.4 18.1±0.4 18.3±0.5
Side lobe suppression for first side lobe
> 19 > 22 > 20 > 19
above main beam (dB)
Horizontal 3 dB beam width (°) 66±5.5 65±4.2 64±3.8 60±3.2
Vertical 3 dB beam width (°) 6.7±0.5 6.1±0.3 5.4±0.4 5.0±0.2
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 27 > 27 > 29 > 29
Cross polar ratio, 0° (dB) > 26 > 25 > 23 > 23
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

68

(51)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1365 x 376 x 99
Packing dimensions (H x W x D) (mm) 1730 x 470 x 165
Antenna weight (kg) 16.0
Antenna packing weight (kg) 26 (including clamps)
Radome material Fiberglass
Radome colour Light grey
1262
1365

Operational temperature (℃) –40 to +65


Connector 6 x 4.3-10 Female
Connector position Bottom
Frontal: 664 (at 150 km/h)
Wind load (N) Lateral: 139 (at 150 km/h)
Maximum: 664 (at 150 km/h)
Max. operational wind speed (km/h) 200
52

Survival wind speed (km/h) 250


Unit: mm

128
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm

Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

3–4

1–2 5–6

y1 y2 y3
L: Left array R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxxx……Ly1

3–4 Cy2 1710–2690 HWxxxxx……Cy2

5–6 Ry3 1710–2690 HWxxxxx…..Ry3

129
Product Product
List Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-
18i/18i/18i-M/M/M-R
EasyRET 6-Port 3H Antenna with 3 Integrated RCUs – 1.4 m
Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz 1710–2690 MHz


(Ly1) (Cy2) (Ry3)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

130
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Antenna Specifications

Electrical Properties
4 x (1710–2690) (Ly1/CLy2/CRy3/Ry4)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–12, continuously adjustable, each band separately
At mid tilt 17.4 17.7 17.9 18.3
Gain (dBi)
Over all tilts 17.2±0.5 17.5±0.5 17.7±0.5 18.0±0.5
Side lobe suppression for first side lobe
> 18 > 18 > 19 > 20
above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 64±5 61±5 60±5
Vertical 3 dB beam width (°) 6.8±0.5 6.1±0.4 5.4±0.4 5.0±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28 (1710–2690 MHz and 1710–2690 MHz)
Front to back ratio, ±30° (dB) > 27 > 28 > 28 > 28
Cross polar ratio, 0° (dB) > 22 > 22 > 22 > 23
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 800 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet is available in XML format.

Mechanical Properties
68

(57)
Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115
Packing dimensions (H x W x D) (mm) 1885 x 535 x 180
Antenna weight (kg) 23.0
Antenna packing weight (kg) 32.0 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1499
1385

Operational temperature (℃) –40 to +65


Frontal: 721 (at 150 km/h)
Wind load (N) Lateral: 106 (at 150 km/h)
Maximum: 721 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
57

Connector position Bottom


Unit: mm

131
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

3–4 5–6

1–2 7–8

L: Left array C: Center array y1 y2 y3 y4


R: Right array y: Yellow

Port Array Freq(MHz) RET S/N


1–2 Ly1 1710–2690 HWxxxx……….Ly1

3–4 CLy2 1710–2690 HWxxxx…....CLy2

5–6 CRy3 1710–2690 HWxxxx……CRy3

7–8 Ry4 1710–2690 HWxxxx…......Ry4

132
Product Product
List Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
18i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.4 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety–Equipment installed outdoor), EN 55032 (Emission),


EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern Sample for Reference

1710–2690 MHz 1710–2690 MHz


(Ly1/Ry4) (CLy2/CRy3)

133
Product Product
List Category
B. Passive Antenna
Multi-band
B - 3 1LnH

4 Ports - 1L1H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

690-960 65 15 0-15
1710-2690 65 17.5 2-12
4 x 4.3-10 1499 x 259 x 135 ADU4518R9v06 / 136

690-960 65 16 0-12
1710-2690 65 18 2-12
4 x 4.3-10 2087 x 259 x 135 ADU4518R7v06 / 139

690-960 65 17 0-10
1710-2690 65 18 2-12
4 x 4.3-10 2555 x 259 x 135 ADU4518R8v06 / 142

698-960 65 12 0
1710-2690 65 12 0
4 x 4.3-10 549 x 265 x 85 ADU451200v06 / 145

6 Ports - 1L2H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

15 0-14
690-960 65
2x1695-2690 2x65
18 0-10 6 x 4.3-10 1499 x 349 x 166 ATR4518R13v06 / 147
18 0-10

16 0-10
690-960 65
2x1695-2690 2x65
18 0-10 6 x 4.3-10 1999 x 349 x 166 ATR4518R6v06 / 150
18 0-10

17 0-10
690-960 65
2x1695-2690 2x65
18 0-10 6 x 4.3-10 2528 x 349 x 166 ATR4518R11v06 / 153
18 0-10

16 0-12
617-894 65
2x1695-2690 2x65
18 0-12 6 x 4.3-10 2099 x 399 x 196 ATR4518R28v06 / 156
18 0-12

17 0–10
690-960 65
2x1695-2690 2x65
20.5 1-7 6 x 4.3-10 2528 x 349 x 166 ATR4521R0v06 / 159
20.5 1-7

134
Product
Category
Multi-band
B - 3 1LnH

8 Ports - 1L3H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

690-960 65 15 0-14
3x1710-2690 3x65 3x17.5 3 x 2-12
8 x 4.3-10 1499 x 369 x 149 AQU4518R14v07 Diamond 162

690-960 65 16 2-12
3x1695-2690 3x65 3x18 3 x 2-12
8 x 4.3-10 1999 x 369 x 149 AQU4518R11v07 Diamond 165

17 0-10
690-960 65 18 0-10
3x1695-2690 3x65 18 0-10
8 x 4.3-10 2528 x 349 x 166 AQU4518R9v06 Diamond 168
17.5 0-10

10 Ports - 1L4H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

16 0-10
16.5 2-12
690-960 65
4x1695-2690 4x65
16.5 2-12 10 x 4.3-10 1999 x 349 x 166 APE4516R1v06 / 170
16 2-12
16 2-12

17 0-10
18 0-10
690-960 65
4x1695-2690 4x65
18 0-10 10 x 4.3-10 2528 x 349 x 166 APE4517R0v06 / 173
17.5 0-10
17.5 0-10

135
Product
Category
ADU4518R9v06
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
690–960 (r) 1710–2690 (y)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–15, continuously adjustable 2–12, continuously adjustable
At mid tilt 14.5 14.5 14.6 14.7 16.8 17.2 17.4 18.1
Gain (dBi)
Over all tilts 14.5±0.3 14.5±0.3 14.6±0.4 14.7±0.4 16.7±0.5 17.1±0.5 17.4±0.5 17.9±0.5

Side lobe suppression for first side


> 17 > 18 > 18 > 17 > 17 > 18 > 18 > 18
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 68±5 66±4 64±3 62±3 60±5 62±5 60±5 60±5

Vertical 3 dB beam width (°) 15.3±1 14.0±0.7 13.3±0.6 12.3±0.7 7.2±0.7 6.5±0.6 5.7±0.5 5.3±0.3

VSWR < 1.5 < 1.5


Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 (690–960 MHz and 1710–2690 MHz)
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 25 > 26 > 28 > 28 > 29
Cross polar ratio, 0° (dB) > 20 > 26 > 23 > 20 > 25 > 26 > 24 > 21
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1499 x 259 x 135

Packing dimensions (H x W x D) (mm) 1835 x 360 x 225 (181)

Antenna weight (kg) 16.5

Antenna packing weight (kg) 25.8 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


1499
1265

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 410 (at 150 km/h)


Wind load (N) Lateral: 220 (at 150 km/h)
Maximum: 470 (at 150 km/h)

Max. operational wind speed (km/h) 200


53

Survival wind speed (km/h) 250


Unit: mm

136
Product Product
List Category
ADU4518R9v06
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y
r

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx….….r

3–4 y 1710–2690 HWxxxxx……..y

137
Product Product
List Category
ADU4518R9v06
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1710–2690 MHz


(r) (y)

138
Product Product
List Category
ADU4518R7v06
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
690–960 (r) 1710–2690 (y)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1710–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–12, continuously adjustable 2–12, continuously adjustable

At mid tilt 15.5 15.9 16.0 16.1 17.1 17.5 17.8 18.3
Gain (dBi)
Over all tilts 15.5±0.4 15.7±0.4 15.8±0.3 16.0±0.3 17.0±0.5 17.4±0.5 17.7±0.3 18.1±0.4
Side lobe suppression for first side
> 18 > 18 > 18 > 18 > 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±2.4 66±1.6 64±1.5 63±2.1 63±4.8 61±4.0 60±2.2 60±4.0

Vertical 3 dB beam width (°) 10.5±0.5 9.8±0.4 9.5±0.4 8.9±0.4 7.2±0.5 6.5±0.5 5.6±0.3 5.5±0.3

VSWR < 1.5 < 1.5


Cross polar isolation (dB) ≥ 28 ≥ 28

Interband isolation (dB) ≥ 28 (690–960MHz and 1710–2690 MHz)

Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25 > 24 > 25 > 25 > 26

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20 > 20 > 20 > 20 > 20

Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

68

Mechanical Properties

Antenna dimensions (H x W x D) (mm) 2087 x 259 x 135

(779)
Packing dimensions (H x W x D) (mm) 2380 x 315 x 200

Antenna weight (kg) 20.2

Antenna packing weight (kg) 28.5 (Including clamps)

Radome material Fiberglass

Radome colour Light grey


2087
1255

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 570 (at 150 km/h)


Wind load (N) Lateral: 306 (at 150 km/h)
Maximum: 654 (at 150 km/h)

Max. operational wind speed (km/h) 200


53

Survival wind speed (km/h) 250

Unit: mm

139
Product Product
List Category
ADU4518R7v06
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-C ASMC00014 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-C ASMDT0C01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y
r

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx….….r

3–4 y 1710–2690 HWxxxxx……..y

140
Product Product
List Category
ADU4518R7v06
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1710–2690 MHz


(r) (y)

141
Product Product
List Category
ADU4518R8v06
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r) 1710–2690 (y)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1710–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable 2–12, continuously adjustable

At mid tilt 16.6 16.7 17.1 17.3 17.1 17.5 17.8 18.3
Gain (dBi)
Over all tilts 16.5±0.3 16.6±0.4 17.0±0.4 17.2±0.4 17.0±0.5 17.4±0.5 17.7±0.3 18.1±0.4
Side lobe suppression for first
> 17 > 18 > 18 > 18 > 17 > 17 > 17 > 17
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±2.5 66±2.5 64±2.3 63±2.0 63±4.8 61±4.0 60±2.2 60±4.0

Vertical 3 dB beam width (°) 8.9±0.5 8.3±0.4 7.9±0.4 7.3±0.4 7.2±0.5 6.5±0.5 5.6±0.3 5.5±0.3

VSWR < 1.5 < 1.5


Cross polar isolation (dB) ≥ 28 ≥ 28

Interband isolation (dB) ≥ 28 (690–960MHz and 1710–2690 MHz)

Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 26 > 24 > 25 > 25 > 26

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20 > 20 > 20 > 20 > 20

Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

Mechanical Properties 68

(567)
Antenna dimensions (H x W x D) (mm) 2555 x 259 x 135

Packing dimensions (H x W x D) (mm) 2970 x 305 x 190

Antenna weight (kg) 23.0

Antenna packing weight (kg) 33.8 (Including clamps)

Radome material Fiberglass


2555
1935

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 698 (at 150 km/h)


Wind load (N) Lateral: 375 (at 150 km/h)
Maximum: 801 (at 150 km/h)

Max. operational wind speed (km/h) 200


53

Survival wind speed (km/h) 250


Unit: mm

142
Product Product
List Category
ADU4518R8v06
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8 ° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

y
r

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxxx….….r

3–4 y 1710–2690 HWxxxxx……..y

143
Product Product
List Category
ADU4518R8v06
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R
EasyRET 4-Port 1L1H Antenna with 2 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1710–2690 MHz


(r) (y)

144
Product Product
List Category
ADU451200v06
DXX-698-960/1710-2690-65/65-12i/12i-0F

Antenna Specifications
Electrical Properties
698–960 (r1) 1710–2690 (y1)
Frequency range (MHz)
698–806 806–960 1710–2200 2300–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 0, fixed 0, fixed
Gain (dBi) 10.5±0.5 11±0.5 11±0.5 11.5±0.5
Horizontal 3 dB beam width (°) 73±4 68±4 68±5 61±6
Vertical 3 dB beam width (°) 40±4 35±4 30±4 24±4
VSWR < 1.8 < 1.8
Cross polar isolation (dB) ≥ 22 ≥ 22
Interband isolation (dB) ≥ 23 ≥ 23
Front to back ratio, ±30° (dB) > 22 > 24 > 24 > 23
Cross polar ratio, 0° (dB) > 18 > 18 > 16 > 16
Max. effective power per port (W) 100 (at 50℃ ambient temperature) 80 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 549 x 265 x 85

Packing dimensions (H x W x D) (mm) 750 x 360 x 225

Antenna weight (kg) 4.7

Bracket weight (kg) 1.2 (1 unit)

Bracket angular Azimuth ±30


range (°) Mechanical downtilt ±15

Antenna packing weight (kg) 7.7 (Including bracket)

Mast diameter Cement or metal pole Φ100–360


supported (mm) Wooden pole Φ200–420

Radome material Fiberglass

Radome colour Light grey Windload Polar Chart

Operational temperature (℃) –55 to +70

Connector 4 x 4.3-10 Female

Connector position Bottom

Frontal: 130 (at 150 km/h)


Wind load (N) Lateral: 35 (at 150 km/h)
Maximum: 150 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

145
Product Product
List Category
ADU451200v06
DXX-698-960/1710-2690-65/65-12i/12i-0F

Port and Array Layout 166

76 60

(274)
1–2 3–4

275

549
Unit: mm

Port Array Freq(MHz)


1–2 r1 698–960

3–4 y1 1710–2690

y1
r1

Pattern Sample for Reference

698- 960 MHz 1710- 2690 MHz


(r1) (y1)

146
Product Product
List Category
ATR4518R13v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
690–960 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
0–10, continuously adjustable, each band
Electrical downtilt (°) 0–14, continuously adjustable
separately
At mid tilt 14.4 14.5 14.7 15.1 17.5 17.8 18.2 18.3
Gain (dBi)
Over all tilts 14.3±0.5 14.5±0.5 14.8±0.5 15.0±0.5 17.3±0.6 17.7±0.5 18.1±0.6 18.2±0.5
Side lobe suppression for first
> 16 > 17 > 17 > 17 > 19 > 19 > 19 > 19
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±2.5 64±2.0 64±2.0 64±3.2 65±3.9 63±3.3 62±4.8 60±4.5
Vertical 3 dB beam width (°) 15.6±1.2 13.7±0.9 13.1±0.8 12.2±0.8 7.1±0.6 6.5±0.5 5.8±0.5 5.2±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 23 > 24 > 24 > 23 > 25 > 27 > 26 > 25
Cross polar ratio, 0° (dB) > 19 > 20 > 20 > 22 > 18 > 19 > 20 > 19
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
700 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties

(137)
68
Antenna dimensions (H x W x D) (mm) 1499 x 349 x 166

Packing dimensions (H x W x D) (mm) 1740 x 445 x 230

Antenna weight (kg) 19.0

Antenna packing weight (kg) 27.7 (including clamps)

Radome material Fiberglass

Radome colour Light grey


1310
1499

Operational temperature (℃) –40 to +65

Connector 6 x 4.3-10 Female

Connector position Bottom

Frontal: 485 (at 150 km/h)


Wind load (N) Lateral: 275 (at 150 km/h)
Maximum: 504 (at 150 km/h)

Max. operational wind speed (km/h) 200


52

Survival wind speed (km/h) 250 Unit: mm

147
Product Product
List Category
ATR4518R13v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

3–4 5–6
y1 r1 y2

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxxx……..r1

3–4 Ly1 1695–2690 HWxxxxx…….Ly1

5–6 Ry2 1695–2690 HWxxxxx…….Ry2

148
Product Product
List Category
ATR4518R13v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(r1) (Ly1) (Ry2)

149
Product Product
List Category
ATR4518R6v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately
At mid tilt 15.5 15.9 16.0 16.1 17.1 17.5 17.8 18.3
Gain (dBi)
Over all Tilts 15.5±0.5 15.8±0.5 15.8±0.5 16.0±0.6 17.1±0.5 17.5±0.4 17.8±0.5 18.2±0.4

Side lobe suppression for first


> 18 > 18 > 18 > 18 > 19 > 19 > 19 > 19
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 65±1.7 65±1.4 65±1.7 65±2.4 65±4.3 64±3.2 63±4.4 62±4.1

Vertical 3 dB beam width (°) 10.3±0.7 9.5±0.5 9.2±0.6 8.6±0.5 7.1±0.5 6.5±0.5 5.8±0.4 5.3±0.2

VSWR < 1.5


Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 27 > 26 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166

(637)
Packing dimensions (H x W x D) (mm) 2240 x 435 x 220

Antenna weight (kg) 23.3

Antenna packing weight (kg) 34.1 (including clamps)

Radome material Fiberglass

Radome colour Light grey


1999
1310

Operational temperature (℃) –40 to +65

Connector 6 x 4.3-10 Female

Connector position Bottom

Frontal: 646 (at 150 km/h)


Wind load (N) Lateral: 366 (at 150 km/h)
Maximum: 672 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


52

Unit: mm

150
Product Product
List Category
ATR4518R6v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

3–4 5–6
y1 y2
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxxx….….r1

3–4 Ly1 1695–2690 HWxxxxx…….Ly1

5–6 Ry2 1695–2690 HWxxxxx……..Ry2

151
Product Product
List Category
ATR4518R6v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(r1) (Ly1) (Ry2)

1
152
Product Product
List Category
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 0–10, continuously adjustable, each band separately

At mid tilt 16.5 16.7 16.8 17.0 17.1 17.5 17.8 18.2
Gain (dBi)
Over all tilts 16.4±0.4 16.6±0.3 16.7±0.2 16.8±0.4 17.1±0.5 17.5±0.4 17.8±0.5 18.2±0.3

Side lobe suppression for first


> 17 > 17 > 17 > 17 > 19 > 19 > 19 > 19
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 66±1.3 66±1.4 65±1.3 65±1.9 65±4.6 64±4.1 63±3.4 62±4.1

Vertical 3 dB beam width (°) 9.0±0.6 8.3±0.4 7.5±0.4 7.2±0.4 7.1±0.5 6.5±0.5 5.8±0.3 5.3±0.2

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Interband isolation (dB) ≥ 30

Front to back ratio, ±30° (dB) > 25 > 26 > 27 > 26 > 25 > 27 > 26 > 25

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18

Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2528 x 349 x 166

Packing dimensions (H x W x D) (mm) 2890 x 435 x 210 (591)


Antenna weight (kg) 26.0

Antenna packing weight (kg) 35.3 (including clamps)

Radome material Fiberglass

Radome colour Light grey


1885
2528

Operational temperature (℃) –40 to +65

Connector 6 x 4.3-10 Female

Connector position Bottom

Frontal: 817 (at 150 km/h)


Wind load (N) Lateral: 463 (at 150 km/h)
Maximum: 849 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


52

Unit: mm

153
Product Product
List Category
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

3–4 5–6
y1 y2
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxxx…..….r1

3–4 Ly1 1695–2690 HWxxxxx…….Ly1

5–6 Ry2 1695–2690 HWxxxxx.…..Ry2

154
Product Product
List Category
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(r1) (Ly1) (Ry2)

1
155
Product Product
List Category
ATR4518R28v06
DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
617–894 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
617–698 698–798 798–894 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45° +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 15.2 15.8 16.2 17.3 17.6 17.8 18.2


Gain (dBi)
Over all tilts 15.0±0.5 15.7±0.5 16.0±0.5 17.1±0.5 17.4±0.5 17.6±0.5 18.0±0.5

Side lobe suppression for first


> 17 > 17 > 17 > 16 > 17 > 17 > 17
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 67±3 64±3 61±3 65±5 63±3 62±4 60±5

Vertical 3 dB beam width (°) 12.5±0.8 10.8±0.7 9.4±0.5 6.7±0.6 6.0±0.5 5.4±0.3 5.0±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 28

Interband isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 23 > 25 > 25 > 26 > 27 > 26 > 26

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 18 > 19 >20 > 20

Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 399 x 196

(725)
Packing dimensions (H x W x D) (mm) 2285 x 465 x 250

Antenna weight (kg) 29.5

Antenna packing weight (kg) 41.1 (Including clamps)

Radome material Fiberglass


1310
2099

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 6 x 4.3-10 Female

Connector position Bottom

Frontal: 556 (at 150 km/h)


Wind load (N) Lateral: 389 (at 150 km/h)
Maximum: 709 (at 150 km/h)
64

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Unit: mm

156
Product Product
List Category
ATR4518R28v06
DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

3–4 5–6

y1 y2
r1

Port Array Freq(MHz) RET S/N


1–2 r1 617–894 HWxxxxx…..….r1

3–4 Ly1 1695–2690 HWxxxxx…….Ly1

5–6 Ry2 1695–2690 HWxxxxx……..Ry2

157
Product Product
List Category
ATR4518R28v06
DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with 3 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

617–894 MHz 1695–2690 MHz


(r1) (Ly1/Ry2)

158
Product Product
List Category
ATR4521R0v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/20.5i/20.5i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with Integrated 3 RCUs – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
0–10, continuously adjustable, each band 1–7, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.2 16.5 16.7 17.0 19.5 19.8 20.1 20.4
Gain (dBi)
Over all tilts 16.1±0.4 16.3±0.4 16.5±0.4 16.8±0.4 19.4±0.5 19.7±0.4 20.1±0.4 20.3±0.5
Side lobe suppression for first side
> 16 > 15 > 16 > 17 > 17 > 17 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 66±5 65±5 64±5 62±5 62±5 61±5 61±5
Vertical 3 dB beam width (°) 8.8±0.8 8.0±0.6 7.7±0.3 7.3±0.3 4.1±0.4 3.7±0.4 3.3±0.4 3.1±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

68

Mechanical Properties

Antenna dimensions (H x W x D) (mm) 2528 x 349 x 166


(591)
Packing dimensions (H x W x D) (mm) 2880 x 415 x 245

Antenna weight (kg) 30.0

Antenna packing weight (kg) 46.3 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65


2528
1885

Connector 6 x 4.3-10 Female

Connector position Bottom

Frontal: 817 (at 150 km/h)


Wind load (N) Lateral: 463 (at 150 km/h)
Maximum: 849 (at 150 km/h)

Max. operational wind speed (km/h) 200


52

Survival wind speed (km/h) 250


Unit: mm

159
Product Product
List Category
ATR4521R0v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/20.5i/20.5i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with Integrated 3 RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2

3–4 5–6

y1 y2
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxxx……..r1

3–4 Ly1 1695–2690 HWxxxxx…...Ly1

5–6 Ry2 1695–2690 HWxxxxx…...Ry2

160
Product Product
List Category
ATR4521R0v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/20.5i/20.5i-M/M/M-R
EasyRET 6-Port 1L2H Antenna with Integrated 3 RCUs – 2.6 m

Antenna Information Management Module (AIMM)


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(r1) (Ly1/Ry2)

1
161
Product Product
List Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/65-
15i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
690–960 (r1) 1710–2690 (Ry3)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 0–14, continuously adjustable 2–12, continuously adjustable
At mid tilt 14.1 14.5 14.6 14.8 17.3 17.6 18.0 18.1
Gain (dBi)
Over all tilts 14.1±0.5 14.5±0.5 14.6±0.5 14.7±0.5 17.1±0.5 17.4±0.5 17.7±0.4 17.8±0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 17 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±1.1 67±0.8 65±1.4 63±3 66±5.1 64±5.3 60±4.5 59±4.7
Vertical 3 dB beam width (°) 15.3±1.0 13.7±1.0 13.0±0.7 12.0±0.8 6.9±0.6 6.2±0.5 5.4±0.4 5.1±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 24 > 25 > 25 > 28 > 26
Cross polar ratio, 0° (dB) > 21 > 20 > 20 > 20 > 20 > 20 > 18 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
1710–2690 (Cy2) 1710–2690 (Ly1)
Frequency range (MHz)
1710–1990 1920–2200 2200–2490 2490–2690 1710–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
At mid tilt 17.2 17.5 17.8 18.0 17.4 17.7 18.0 18.2
Gain (dBi)
Over all tilts 17.0±0.5 17.3±0.5 17.6±0.4 17.7±0.5 17.2±0.5 17.5±0.5 17.8±0.4 18.0±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 64±6.3 63±6.7 60±6.1 59±4.0 67±5.3 65±4.8 61±3.5 60±2.9
Vertical 3 dB beam width (°) 6.9±0.5 6.2±0.5 5.4±0.4 5.1±0.3 6.9±0.6 6.2±0.5 5.4±0.5 5.1±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 25 > 28 > 26 > 25 > 26 > 28 > 27
Cross polar ratio, 0° (dB) > 20 > 20 > 18 > 17 > 22 > 22 > 19 > 22
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

* Max. effective power whole antenna: 700 W (at 50℃ ambient temperature)

162
Product Product
List Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/65-
15i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 1.4 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Port and Array Layout

1–2 5–6

3–4 7–8
y1 y2 y3
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx……...r1

3–4 Ly1 1710–2690 HWxxxx……Ly1

5–6 Cy2 1710–2690 HWxxxx……Cy2

7–8 Ry3 1710–2690 HWxxxx……Ry3

1
163
Product Product
List Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/65-
15i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 1.4 m
68
Mechanical Properties

(58)
Antenna dimensions (H x W x D) (mm) 1499 x 369 x 149
Packing dimensions (H x W x D) (mm) 1870 x 455 x 205
Antenna weight (kg) 23.5
Antenna packing weight (kg) 34.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

1381
1499
Operational temperature (℃) –40 to +65
Frontal: 425 (at 150 km/h)
Wind load (N) Lateral: 140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom

60
Unit: mm
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–960 MHz 1710–2690 MHz


(r1) (Ry3)

1710–2690 MHz 1710–2690 MHz


(Cy2) (Ly1)

1
164
Product Product
List Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/65-
16i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r1) 1695–2690 (Ry3)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
At mid tilt 15.4 15.8 15.9 16.2 17.4 17.8 18.0 18.4
Gain (dBi)
Over all tilts 15.3±0.5 15.7±0.5 15.8±0.5 16.1±0.5 17.3±0.5 17.7±0.5 17.8±0.4 18.0±0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 17 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±3.0 65±2.5 66±3.5 63±3.7 68±4.5 66±4.9 62±3.7 60±4.8
Vertical 3 dB beam width (°) 10.8±1.0 9.5±0.5 9.2±0.4 8.5±0.5 6.7±0.5 5.9±0.5 5.3±0.5 4.8±0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 25 > 26 > 25
Cross polar ratio, 0° (dB) > 22 > 22 > 22 > 22 > 22 > 21 > 20 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
1695–2690 (Cy2) 1695–2690 (Ly1)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
At mid tilt 17.1 17.6 17.7 18.1 17.4 17.8 18.0 18.4
Gain (dBi)
Over all tilts 17.0±0.5 17.4±0.5 17.6±0.4 17.9±0.5 17.2±0.5 17.7±0.5 17.8±0.4 18.3±0.5
Side lobe suppression for first side
> 17 > 16 > 16 > 16 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67±4.8 65±4.8 60±5.0 57±4.5 68±5.2 66±4.6 61.0±5.2 60±4.4
Vertical 3 dB beam width (°) 6.5±0.5 5.8±0.5 5.4±0.4 4.8±0.4 6.7±0.5 5.9±0.4 5.3±0.4 4.8±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 27 > 28 > 26 > 26 > 24 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 21 > 20 > 17 > 22 > 22 > 22 > 22 > 22
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

165
Product Product
List Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/65-
16i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Port and Array Layout

1–2 5–6

3–4 7–8
y1 y2 y3
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx……...r1

3–4 Ly1 1695–2690 HWxxxx……Ly1

5–6 Cy2 1695–2690 HWxxxx……Cy2

7–8 Ry3 1695–2690 HWxxxx……Ry3

166
Product Product
List Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/65-
16i/18i/18i/18i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 2.0 m

Mechanical Properties 68
Antenna dimensions (H x W x D) (mm) 1999 x 369 x 149

(535)
Packing dimensions (H x W x D) (mm) 2365 x 455 x 195
Antenna weight (kg) 28.0
Antenna packing weight (kg) 39.6 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

1404
1999
Operational temperature (℃) –40 to +65
Frontal: 580 (at 150 km/h)
Wind load (N) Lateral: 195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom

60
Unit: mm
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(r1) (Ry3)

1695–2690 MHz 1695–2690 MHz


(Cy2) (Ly1)

167
Product Product
List Category
AQU4518R9v06
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/65-
17i/18i/18i/17.5i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r1) 3 x (1695–2690) (Ly1/RTy2/RBy3)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately
At mid tilt 16.2 16.5 16.7 17.0
Over all tilts 16.1±0.5 16.3±0.4 16.5±0.4 16.8±0.4
At mid tilt 17.1 17.3 17.1 17.6
Gain (dBi) Bottom
Over all tilts 16.9±0.5 17.1±0.3 17.0±0.4 17.4±0.5
At mid tilt 16.8 17.1 16.8 17.3
Top
Over all tilts 16.7±0.5 17.0±0.4 16.7±0.4 17.1±0.5
Side lobe suppression for first side lobe
> 17 > 18 > 17 > 17 > 17 > 17 >17 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 67±1.9 66±3.5 65±2.4 62±3.3 63±3.4 62±2.8 61±3.7 60±3.1
Vertical 3 dB beam width (°) 8.8±0.6 8.5±0.4 8.0±0.3 7.4±0.3 7.4±0.5 6.8±0.5 6.0±0.4 5.5±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 24 > 24 > 25 > 25
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20 > 17 > 17 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties

(591)
Antenna dimensions (H x W x D) (mm) 2528 x 349 x 166
Packing dimensions (H x W x D) (mm) 2890 x 435 x 210
Antenna weight (kg) 28.0
Antenna packing weight (kg) 39.3 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
Frontal: 825 (at 150 km/h)
1885
2528

Wind load (N) Lateral: 240 (at 150 km/h)


Maximum: 870 (at 150 km/h)
Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


Connector 8 x 4.3-10 Female
Connector position Bottom
52

Accessories
Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

168
Product Product
List Category
AQU4518R9v06
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/65-
17i/18i/18i/17.5i-M/M/M/M-R
EasyRET 8-Port 1L3H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Port and Array Layout

5–6 7–8

y2

3–4 1–2

y1 y3
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx..………..r1

3–4 Ly1 1695–2690 HWxxxx……….Ly1

5–6 RTy2 1695–2690 HWxxxx……..RTy2

7–8 RBy3 1695–2690 HWxxxx……..RBy3

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(r1) (Ly1/RTy2/RBy3)

169
Product Product
List Category
APE4516R1v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r1) 4 x (1695–2690) (LBy1/LTy2/RTy3/RBy4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable 2–12, continuously adjustable, each band separately
At mid tilt 15.4 15.7 16.0 16.1
Over all tilts 15.3±0.5 15.6±0.5 15.8±0.5 16.0±0.5
At mid tilt 15.8 16.2 16.5 16.7
Gain (dBi) Bottom
Over all tilts 15.8±0.5 16.2±0.5 16.5±0.4 16.6±0.6
At mid tilt 15.4 15.8 15.9 16.2
Top
Over all tilts 15.3±0.5 15.7±0.5 15.8±0.5 16.0±0.6
Side lobe suppression for first side lobe
> 17 > 17 > 17 > 17 > 17 > 17 > 17 > 17
above main beam (dB)
Horizontal 3 dB beam width (°) 67±3.0 67±3.0 66±3.0 64±4.0 63±4.0 61±4.0 60±4.0 61±5.0
10.3±0.7 9.3±0.5 9.1±0.6 8.4±0.6
Vertical 3 dB beam
Bottom 10.3±0.7 9.4±0.6 8.1±0.5 7.5±0.5
width (°)
Top 9.9±0.8 8.9±0.6 7.8±0.3 7.1±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 30 ≥ 30
Front to back ratio, ±30° (dB) > 25 > 24 > 24 > 24 > 24 > 26 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 17 > 18 > 18 > 18 > 20
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties

(637)
Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166
Packing dimensions (H x W x D) (mm) 2235 x 435 x 215
Antenna weight (kg) 26.5
Antenna packing weight (kg) 37.1 (Including clamps)
Radome material Fiberglass
1999

Radome colour Light grey


Operational temperature (℃) –40 to +65
1310

Frontal: 646 (at 150 km/h)


Wind load (N) Lateral: 366 (at 150 km/h)
Maximum: 672 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom
52

Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

170
Product Product
List Category
APE4516R1v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.0 m

Windload Polar Chart

Port and Array Layout

5–6 7–8

y2 y3

3–4 1–2
9–10
y1 y4
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx…………r1

3–4 LBy1 1695–2690 HWxxxx…….LBy1

5–6 LTy2 1695–2690 HWxxxx…….LTy2

7–8 RTy3 1695–2690 HWxxxx……RTy3

9–10 RBy4 1695–2690 HWxxxx..….RBy4

171
Product Product
List Category
APE4516R1v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(r1) (LBy1/LTy2/RTy3/RBy4)

172
Product Product
List Category
APE4517R0v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
690–960 (r1) 4 x (1695–2690) (LBy1/LTy2/RTy3/RBy4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately
At mid tilt 16.2 16.5 16.7 17.0
Over all tilts 16.1±0.5 16.3±0.4 16.5±0.4 16.8±0.4
Gain At mid tilt 17.1 17.3 17.1 17.6
Bottom
(dBi) Over all tilts 16.9±0.5 17.1±0.3 17.0±0.4 17.4±0.5
At mid tilt 16.8 17.1 16.8 17.3
Top
Over all tilts 16.7±0.5 17.0±0.4 16.7±0.4 17.1±0.5
Side lobe suppression for first side
> 17 > 17 > 17 > 17 > 17 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67±1.9 66±3.5 65±2.4 62±3.3 63±3.4 62±2.8 61±3.7 60±3.1
Vertical 3 dB beam width (°) 8.8±0.6 8.5±0.4 8.0±0.3 7.4±0.3 7.4±0.5 6.8±0.5 6.0±0.4 5.5±0.2
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 30 ≥ 30
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 24 > 24 > 25 > 25
Cross polar ratio (dB), 0° (dB) > 20 > 20 > 20 > 20 > 17 > 17 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1000 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2528 x 349 x 166
Packing dimensions (H x W x D) (mm) 2880 x 415 x 245
(591)

Antenna weight (kg) 32.0


Antenna packing weight (kg) 48.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2528

Operational temperature (℃) –40 to +65


Frontal: 817 (at 150 km/h)
1885

Wind load (N) Lateral: 463 (at 150 km/h)


Maximum: 849 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom
52

Unit: mm

173
Product Product
List Category
APE4517R0v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 y2 y3

3–4 9–10

y1 y4
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx……….r1

3–4 LBy1 1695–2690 HWxxxx…….LBy1

5–6 LTy2 1695–2690 HWxxxx…….LTy2

7–8 RTy3 1695–2690 HWxxxx……RTy3

9–10 RBy4 1695–2690 HWxxxx..….RBy4

174
Product Product
List Category
APE4517R0v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 10-Port 1L4H Antenna with 5 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

1695–2690 MHz
690–960 MHz
(LBy1/LTy2/RTy3/RBy4)
(r1)

175
Product Product
List Category
B. Passive Antenna
Multi-band
B - 4 2LnH

8 Ports - 2L2H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2x690-960 2x65 2x14.5 2 x 2-16


2x1427-2690 2x65 2x17.5 2 x 2-12
8 x 4.3-10 1509 x 449 x 196 AQU4518R37v06 Golden Pro 179

2x690-960 2x65 2x16 2 x 0-10


2x1427-2690 2x65 2x17.5 2 x 2-12
8 x 4.3-10 2099 x 449 x 196 AQU4518R36v06 Golden Pro 182

2x690-960 2x65 2x17


2x1427-2690 2x65 2x18.5
4 x 2-12 8 x 4.3-10 2550 x 429 x 196 *AQU4519R1v06 Golden Pro 185

2x690-960 2x65 2x14.5 2 x 0-14


2x1695-2690 2x65 2x18 2 x 2-12
8 x 4.3-10 1499 x 429 x 196 *AQU4518R23v18 Golden 189

2x690-960 2x65 2x16 2 x 0-10


2x1695-2690 2x65 2x18 2 x 2-12
8 x 4.3-10 1999 x 429 x 196 AQU4518R24v18 Golden 192

2x690-960 2x65 2x17 2 x 0-10


2x1695-2690 2x65 2x18 2 x 2-12
8 x 4.3-10 2550 x 429 x 196 AQU4518R25v18 Golden 195

2x690-960 2x65 2x14 2 x 2-14


2x1427-2690 2x65 2x18.5 2 x 2-12
8 x 4.3-10 1509 x 369 x 226 AQU4518R60v06 Golden Mini 198

2x690-960 2x65 2x15


2x1427-2690 2x65 2x18.5
4 x 2-12 8 x 4.3-10 2099 x 369 x 226 AQU4518R61v06 Golden Mini 201

2x690-960 2x65 2x16


2x1427-2690 2x65 2x18.5
4 x 2-12 8 x 4.3-10 2550 x 369 x 226 AQU4518R63v06 Golden Mini 204

2x690-960 2x33 2x19


2x1695-2690 2x33 2x20
4 x 2-12 8 x 4.3-10 2550 x 749 x 226 AQU4520R01v06 High gain 207

176
Product
Category
Multi-band
B - 4 2LnH

8 Ports - 2L2H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2x690-960 2x65 2x16 2 x 2-12 Eco-High


2x1427-2690 2x65 2x20.5 2 x 1-7
8 x 4.3-10 2099 x 429 x 196 AQU4521R01v06
gain
210

2x690-960 2x65 2x17 2 x 0-10


2x1695-2690 2x65 2x21 2 x 1-7
8 x 4.3-10 2550 x 429 x 196 AQU4521R2v06 / 213

12 Ports - 2L4H

Frequency 3dB Horizontal Gain Electrical


Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) (dBi) Downtilt (o)

2x690-960 2x65 2x14.5 2 x 0-14


2x1695-2200 2x65 2x17 2 x 2-12 12 x 4.3-10 1499 x 429 x 196 ASI4518R14v18 Golden 216
2x2490-2690 2x65 2x17.5 2 x 2-12

2x690-960 2x65 2x16 2 x 0-10


4x1695-2690 4x65 4x16.5 4 x 2-12
12 x 4.3-10 1999 x 429 x 196 *ASI4517R3v18 Golden 219

2x690-960 2x65 2x17 2 x 0-10


4x1695-2690 4x65 4x17.5 4 x 2-12
12 x 4.3-10 2769 x 429 x 196 ASI4518R10v18 Golden 222

2x690-960 2x65 2x15 2 x 2-12


2x1427-2690 2x65 2x17 2 x 2-12 12 x 4.3-10 2009 x 369 x 226 ASI4517R12v07 Golden mini 225
2x1695-2690 2x65 2x17.5 2 x 2-12

2x690-960 2x65 2x16 2 x 2-12


2x1427-2690 2x65 2x18 2 x 2-12 12 x 4.3-10 2769 x 369 x226 ASI4518R57v06 Golden mini 229
2x1695-2690 2x65 2x18 2 x 2-12

2x690-960 2x65 2x14.5 2 x 0-14


2x1427-2690 2x65 2x17.5 2 x 2-12 12 x 4.3-10 1509 x 469 x 206 ASI4518R37v07 Munich Pro 233
2x1695-2690 2x65 2x17.5 2 x 2-12

177
Product
Category
Multi-band
B - 4 2LnH

12 Ports - 2L4H
Frequency 3dB Horizontal Electrical
Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2x690-960 2x65 2x15.5 2 x 2-12


2x1427-2690 2x65 2x18 2 x 2-12 12 x 4.3-10 2009 x 469 x 206 *ASI4518R39v07 Munich Pro 237
2x1695-2690 2x65 2x18 2 x 2-12

2x690-960 2x65 2x17 2 x 2-12


2x1427-2690 2x65 2x17.5 2 x 2-12 12 x 4.3-10 2695 x 429 x 196 ASI4518R73v06 Golden Pro 241
2x1695-2690 2x65 2x17.5 2 x 2-12

2x617-894 2x65 2x15.5 2 x 2-14


4x1695-2690 4x65 4x17.5 4 x 2-12
12 x 4.3-10 2099 x 499 x 206 ASI4516R0v07 Vancouver 245

2x690-960 2x65 2x15.5


2 x 2-12 Eco-High
2x1427-2690 2x65 2x20.5
4 x 1-7
12 x 4.3-10 2769 x 369 x226 *ASI4521R01v06
gain 248
2x1695-2690 2x65 2x20.5

16 Ports - 2L6H
Frequency 3dB Horizontal Electrical
Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2*690-960 2x65 2x14.5 2x(2-16)


2*1427-2690 2x65 2x18 2 x 2-12
2*1695-2200 2x65 2x17.5 2 x 2-12
16 x 4.3-10 1509 x 469 x 206 AOC4518R07v07 Munich Pro 250
2*2490-2690 2x65 2x18 2 x 2-12

2*690-960 2x65 2x15.5 2 x 2-12


2*1427-2690 2x65 2x17 2 x 2-12 16 x 4.3-10 2099 x 469 x 206 AOC4518R21v06 Munich Pro 254
4x1695-2690 4x65 4x17.5 4 x 2-12

2*690-960 2x65 2x16.5 2 x 2-12


2*1427-2690 2x65 2x17.5 2 x 2-12 16 x 4.3-10 2695 x 469 x 206 AOC4518R19v09 Munich Pro 258
4*1695-2690 4x65 4x18 4 x 2-12

2x690-960 2x65 2x16 2 x 2-12


2x1427-2690 2x65 2x18 2 x 2-12
2x1695-2200 2x65 2x17.5 2 x 2-12
16 x 4.3-10 2009 x 469 x 206 *AOC4518R27v06 Munich Pro 262
2x2490-2690 2x65 2x18 2 x 2-12

2*617-894 2x65 2x15.5 2 x 2-12


2*1695-2200 2x65 2x16 2 x 2-12
2*2490-2690 2x65 2x17 2 x 2-12
16 x 4.3-10 2099×499×206 AOC4518R11v06 Vancouver 263
2*1695-2690 2x65 2x17.5 2 x 2-12

*Preliminary Issue

178
Product
Category
AQU4518R37v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
14.5i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–16, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately

At mid tilt 13.7 14.1 14.2 14.3 15.6 16.8 17.1 17.2 17.5
Gain (dBi)
14.0±0. 14.1±0. 14.2±0. 15.5
Over all tilts 13.6±0.5 16.7±0.5 17.0±0.5 17.1±0.5 17.4±0.5
5 5 5 ±0.6
Side lobe suppression for first
> 15 > 16 > 16 > 16 > 15 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±6 67±6 66±6 65±6 70±7 69±6 65±6 60±6 58±6
13.8±0. 13.3±0. 12.4±0.
Vertical 3 dB beam width (°) 15.1±1.5 9.0±0.5 7.1±0.7 6.3±0.5 5.6±0.4 5.1±0.4
9 9 8
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 26 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 21 > 22 > 22 > 23 > 25 > 25 > 25 > 24
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 16 > 17 > 17 > 17 > 16
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
700 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties 68
Antenna dimensions (H x W x D) (mm) 1509 x 449 x 196
Packing dimensions (H x W x D) (mm) 1770 x 535 x 240 (67)
Antenna weight (kg) 27.0
Antenna packing weight (kg) 37.6 (Including clamps)
Radome material Fiberglass
1509
1383

Radome colour Light grey


Operational temperature (℃) –40 to +65
Frontal: 448 (at 150 km/h)
Wind load (N) Lateral: 340 (at 150 km/h)
Maximum: 607 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
59

Connector 8 x 4.3-10 Female Unit: mm


Connector position Bottom

179
Product Product
List Category
AQU4518R37v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
14.5i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 3–4 y1 y2
r1 r2

Pattern Sample for Reference

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…….Lr1

3–4 Rr2 690–960 HWxxxx…….Rr2

5–6 Ly1 1427–2690 HWxxxx…….Ly1

7–8 Ry2 1427–2690 HWxxxx…....Ry2

180
Product Product
List Category
AQU4518R37v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
14.5i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

181
Product Product
List Category
AQU4518R36v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
16i/16i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz) 690– 790– 824– 880– 1427– 1695– 1920– 2200– 2490–
803 862 894 960 1518 1990 2200 2490 2690
Polarization +45°, –45°
0–10, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately

At mid tilt 14.8 15.1 15.4 15.7 15.7 16.9 17.1 17.3 17.5
Gain (dBi)
14.7±0. 15.0±0. 15.3±0. 15.5±0.
Over all tilts 15.6±0.6 16.8±0.5 17.0±0.5 17.2±0.5 17.4±0.5
5 5 5 5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±6 66±6 65±6 64±6 70±7 68±6 66±6 63±6 58±6
10.7±0.
Vertical 3 dB beam width (°) 9.7±0.5 9.3±0.5 8.6±0.5 8.9±0.5 7.1±0.6 6.3±0.6 5.5±0.5 5.1±0.4
8
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 26 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 22 > 25 > 25 > 25 >24 >25 >26 >26 >25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 >17 >18 >18 >18 >17
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
900 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 449 x 196
Packing dimensions (H x W x D) (mm) 2360 x 535 x 240 (635)
Antenna weight (kg) 37.3
Antenna packing weight (kg) 51.8 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
2099
1405

Frontal: 623 (at 150 km/h)


Wind load (N) Lateral: 473 (at 150 km/h)
Maximum: 844 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
59

Unit: mm

182
Product Product
List Category
AQU4518R36v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
16i/16i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 3–4
y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…….Lr1

3–4 Rr2 690–960 HWxxxx…….Rr2

5–6 Ly1 1427–2690 HWxxxx…….Ly1

7–8 Ry2 1427–2690 HWxxxx…....Ry2

183
Product Product
List Category
AQU4518R36v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/65-
16i/16i/17.5i/17.5i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

184
Product Product
List Category
AQU4519R1v06
D04X-2x690-960/2x1427-2690-4x65-2x17i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.8 16.4 16.7 16.8
Gain (dBi)
Over all tilts 15.5±0.5 16.3±0.6 16.5±0.6 16.7±0.6
Side lobe suppression for first side
> 16 > 17 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 66±6 64±6
Vertical 3 dB beam width (°) 8.8±0.8 8.0±0.6 7.8±0.5 7.5±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 27
Front to back ratio, ±30° (dB) > 21 > 22 > 24 > 24
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –1.25
Efficiency average (%) 75
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.7 17.8 18.2 18.4 18.6
Gain (dBi)
Over all tilts 16.5±0.9 17.6±0.8 18.1±0.6 18.2±0.6 18.4±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±7 63±6 61±6 60±6 58±6
Vertical 3 dB beam width (°) 7.6±0.8 6.5±0.8 5.8±0.8 5.3±0.6 4.8±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 27
Front to back ratio, ±30° (dB) > 24 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

185
Product Product
List Category
AQU4519R1v06
D04X-2x690-960/2x1427-2690-4x65-2x17i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 429 x 196

(706)
Packing dimensions (H x W x D) (mm) 2810 x 515 x 235
Antenna weight (kg) 33.9
Antenna packing weight (kg) 48.4 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65

2550
1787
Frontal: 649 (at 150 km/h)
Wind load (N) Lateral: 549 (at 150 km/h)
Maximum: 988 (at 150 km/h)

Max. operational wind speed (km/h) 200


Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom

57
Windload Polar Chart

Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

186
Product Product
List Category
AQU4519R1v06
D04X-2x690-960/2x1427-2690-4x65-2x17i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Port and Array Layout

5–6 7–8

1–2 3–4 y1 y2

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…….…Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 Ly1 1427–2690 HWxxxx……...Ly1

7–8 Ry2 1427–2690 HWxxxx……..Ry2

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

187
Product Product
List Category
AQU4519R1v06
D04X-2x690-960/2x1427-2690-4x65-2x17i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

188
Product Product
List Category
AQU4518R23v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
14.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.4 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
0–14, continuously adjustable, each 2–12, continuously adjustable, each band
Electrical downtilt (°)
band separately separately
At mid tilt 13.8 14.2 14.4 14.5 17.0 17.2 17.4 18.1
Gain (dBi)
Over all tilts 13.7±0.5 14.1±0.5 14.3±0.5 14.4±0.5 16.8±0.5 17.1±0.5 17.3±0.5 17.9±0.5
Side lobe suppression for first side lobe
> 15 > 17 > 17 > 16 > 16 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 66±5 63±5 62±5 60±5 65±5 63±5 60±5 60±5

Vertical 3 dB beam width (°) 15.3±1.2 14.0±1.1 13.3±1.0 12.2±0.8 6.8±0.7 5.8±0.5 5.3±0.4 5.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 24 > 24 > 25 > 26 > 27 > 27 > 27
Cross polar ratio, 0° (dB) > 16 > 18 > 19 > 20 > 15 > 16 > 17 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties
68

(66)
Antenna dimensions (H x W x D) (mm) 1499 x 429 x 196
Packing dimensions (H x W x D) (mm) 1740 x 515 x 250
Antenna weight (kg) 26.0
Antenna packing weight (kg) 36.8 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
1499
1376

Connector 8 x 4.3-10 Female


Connector position Bottom
Frontal: 381 (at 150 km/h)
Wind load (N) Lateral: 323 (at 150 km/h)
Maximum: 581 (at 150 km/h)
Max. operational wind speed (km/h) 200
57

Survival wind speed (km/h) 250


Unit: mm

189
Product Product
List Category
AQU4518R23v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
14.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

190
Product Product
List Category
AQU4518R23v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
14.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.4 m
Port and Array Layout
1–2 3–4

5–6 7–8

y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1695–2690 HWxxxx……Ly1

7–8 Ry2 1695–2690 HWxxxx…...Ry2

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

191
Product Product
List Category
AQU4518R24v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
16i/16i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
0–10, continuously adjustable, each 2–12, continuously adjustable, each band
Electrical downtilt (°)
band separately separately
At mid tilt 15.0 15.5 15.8 16.0 17.0 17.2 17.7 18.1
Gain (dBi)
Over all tilts 14.7±0.5 15.3±0.5 15.6±0.5 15.8±0.5 16.8±0.5 17.1±0.5 17.5±0.5 17.9±0.5
Side lobe suppression for first side lobe
> 16 > 17 > 17 > 17 > 16 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5 65±5 63±5 61±5 60±5
Vertical 3 dB beam width (°) 10.5±0.9 9.5±0.8 9.2±0.7 8.5±0.7 6.8±0.7 5.8±0.5 5.3±0.4 5.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 25 > 26 > 26 > 26 > 27 > 27 > 28
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20 > 15 > 16 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 429 x 196
Packing dimensions (H x W x D) (mm) 2270 x 515 x 235 (669)
Antenna weight (kg) 29.0
Antenna packing weight (kg) 39.3 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
1273
1999

Connector 8 x 4.3-10 Female


Connector position Bottom
Frontal: 509 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 774 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
57

Unit: mm

192
Product Product
List Category
AQU4518R24v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
16i/16i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

5–6 7–8

y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1695–2690 HWxxxx……Ly1

7–8 Ry2 1695–2690 HWxxxx…...Ry2

193
Product Product
List Category
AQU4518R24v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
16i/16i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

194
Product Product
List Category
AQU4518R25v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
0–10, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.8 16.4 16.7 17.0 17.0 17.2 17.7 18.1
Gain (dBi)
Over all tilts 15.5±0.5 16.3±0.5 16.5±0.5 16.7±0.5 16.8±0.5 17.1±0.5 17.5±0.5 17.9±0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 17 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 65±5 60±5 58±5 65±5 63±5 61±5 60±5
Vertical 3 dB beam width (°) 8.8±0.7 8.0±0.6 7.8±0.5 7.5±0.5 6.8±0.7 5.8±0.5 5.3±0.4 5.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26 > 26 > 27 > 27 > 28
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20 > 15 > 16 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1000 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties

(706)
Antenna dimensions (H x W x D) (mm) 2550 x 429 x 196
Packing dimensions (H x W x D) (mm) 2810 x 515 x 235
Antenna weight (kg) 33.9
Antenna packing weight (kg) 48.4 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
1787
2550

Connector 8 x 4.3-10 Female


Connector position Bottom
Frontal: 649 (at 150 km/h)
Wind load (N) Lateral: 549 (at 150 km/h)
Maximum: 988 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
57

Unit: mm

195
Product Product
List Category
AQU4518R25v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

5–6 7–8
y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx……Rr2

5–6 Ly1 1695–2690 HWxxxx……Ly1

7–8 Ry2 1695–2690 HWxxxx…...Ry2

196
Product Product
List Category
AQU4518R25v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/18i/18i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

197
Product Product
List Category
AQU4518R60v06
D04X-2x690-960/2x1427-2690-4x65-2x14i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz) 1427– 1695– 1920– 2200– 2490–
690–803 790–862 824–894 880–960
1518 1990 2200 2490 2690
Polarization +45°, –45° +45°, –45°
2–14, continuously adjustable,
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
each band separately
At mid tilt 13.1 13.4 13.6 13.8 15.8 17.3 17.8 18.2 18.5
Gain (dBi) 13.0±0. 13.3±0. 13.5±0. 13.7±0.
Over all tilts 15.8 ±0.9 17.2±0.7 17.7±0.7 18.0±0.5 18.4±0.5
6 5 5 5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 66±6 64±6 61±6 70±7 63±7 61±6 60±6 58±6
15.1±0. 13.8±0. 13.3±0. 12.4±0.
Vertical 3 dB beam width (°) 8.9±0.8 7.3±0.8 6.7±0.7 6.0±0.6 5.1±0.6
9 7 5 5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 20 > 21 > 21 > 26 > 28 > 28 > 27 > 28
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
– – – – –
Efficiency (dB) –1.34
0.75±0.15 0.85±0.15 0.90±0.20 1.00±0.20 1.10±0.20
Efficiency average (%) 74 84 82 81 79 78
Max. effective power per port (W) 300 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1200 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
68

Mechanical Properties (61)


Antenna dimensions (H x W x D) (mm) 1509 x 369 x 226
Packing dimensions (H x W x D) (mm) 1740 x 455 x 270
Antenna weight (kg) 25.8
Antenna packing weight (kg) 36.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1509
1380

Operational temperature (℃) –40 to +65


Frontal: 272 (at 150 km/h)
Wind load (N) Lateral: 192 (at 150 km/h)
Maximum: 469 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
68

Connector position Bottom Unit: mm

198
Product Product
List Category
AQU4518R60v06
D04X-2x690-960/2x1427-2690-4x65-2x14i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 3–4

y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1427–2690 HWxxxx…..Ly1

7–8 Ry2 1427–2690 HWxxxx…..Ry2

199
Product Product
List Category
AQU4518R60v06
D04X-2x690-960/2x1427-2690-4x65-2x14i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 1.5 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

200
Product Product
List Category
AQU4518R61v06
D04X-2x690-960/2x1427-2690-4x65-2x15i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz) 690– 790– 824– 880– 1427– 1695– 1920– 2200– 2490–
803 862 894 960 1518 1990 2200 2490 2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 14.1 14.7 14.9 15.1 16.1 17.6 18.0 18.5 18.6
Gain (dBi) 14.0±0. 14.6±0. 14.8±0. 15.0±0.
Over all tilts 16.0±0.8 17.5±0.7 17.9±0.7 18.4±0.5 18.5±0.5
5 5 5 5
Side lobe suppression for first
> 15 > 16 > 16 > 15 > 15 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 66±6 63±6 60±6 70±7 63±7 60±7 59±6 57±6
Vertical 3 dB beam width (°) 10.5±0.9 9.5±0.7 9.2±0.5 8.7±0.5 7.7±0.6 6.5±0.6 5.9±0.6 5.3±0.5 4.8±0.5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 22 > 22 > 23 > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.46 –0.75±0.15 –0.85±0.15 –0.90±0.20 –1.00±0.20 –1.10±0.20
Efficiency average (%) 72 84 82 81 79 78
Max. effective power per port
400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
(W)
Max. effective power whole
1200 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 369 x 226
(651)

Packing dimensions (H x W x D) (mm) 2335 x 455 x 270


Antenna weight (kg) 31.5
Antenna packing weight (kg) 43.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1380
2099

Operational temperature (℃) –40 to +65


Frontal: 379 (at 150 km/h)
Wind load (N) Lateral: 267 (at 150 km/h)
Maximum: 652 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
68

Unit: mm

201
Product Product
List Category
AQU4518R61v06
D04X-2x690-960/2x1427-2690-4x65-2x15i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 3–4

y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1427–2690 HWxxxx……Ly1

7–8 Ry2 1427–2690 HWxxxx…...Ry2

202
Product Product
List Category
AQU4518R61v06
D04X-2x690-960/2x1427-2690-4x65-2x15i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

203
Product Product
List Category
AQU4518R63v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 15.0 15.6 15.8 16.2 16.1 17.6 18.0 18.5 18.6
Gain (dBi)
Over all tilts 14.9±0.5 15.5±0.6 15.7±0.6 16.0±0.8 16.0 ±0.8 17.5±0.7 17.9±0.7 18.4±0.5 18.5±0.5
Side lobe suppression for first side
lobe above main beam (dB)
> 16 > 17 > 17 > 16 > 15 > 16 > 16 > 16 > 16

Horizontal 3 dB beam width (°) 70±7 65±6 63±6 58±6 70±7 63±7 60±7 59±6 57±6
Vertical 3 dB beam width (°) 8.8±0.7 7.9±0.6 7.6±0.5 7.3±0.5 7.7±0.6 6.5±0.6 5.9±0.6 5.3±0.5 4.8±0.5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 22 > 22 > 24 > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.60 –0.75±0.15 –0.85±0.15 –0.90±0.20 –1.00±0.20 –1.10±0.20
Efficiency average (%) 69 84 82 81 79 78
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1200 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties 68

(587)
Antenna dimensions (H x W x D) (mm) 2550 x 369 x 226
Packing dimensions (H x W x D) (mm) 2945 x 455 x 275
Antenna weight (kg) 35.0
Antenna packing weight (kg) 51.0 (Including clamps)
Radome material Fiberglass
2550

Radome colour Light grey


Operational temperature (℃) –40 to +65
1900

Frontal: 460 (at 150 km/h)


Wind load (N) Lateral: 324 (at 150 km/h)
Maximum: 792 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
63

Unit: mm

204
Product Product
List Category
AQU4518R63v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–8° 2.1 kg 1 (Separate packing)

Port and Array Layout

5–6 7–8

1–2 3–4

y1 y2

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1427–2690 HWxxxx……Ly1

7–8 Ry2 1427–2690 HWxxxx……Ry2

205
Product Product
List Category
AQU4518R63v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x18.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

206
Product Product
List Category
AQU4520R01v06
D04X-2x690-960/2x1695-2690-4x33-2x19i/2x20i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs – 2.6m

Antenna Specifications
Electrical Properties
2 x (690–960) (r1) 2 x (1695–2690) (y1)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45° , –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 17.5 18.0 18.1 18.5 19.0 19.6 19.8 20.5
Gain (dBi)
Over all tilts 17.4±0.5 17.9±0.5 18.1±0.5 18.4±0.5 18.9±0.5 19.5±0.5 19.5±0.5 20.4±0.5
Side lobe suppression for first
> 16 > 16 > 16 > 16 > 18 > 18 > 17 > 17
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 39±6 38±6 38±5 37±5 37±3 35±3 33±3 31±3
Vertical 3 dB beam width (°) 8.7±0.6 8.0±0.6 7.7±0.5 7.2±0.5 7.2±0.6 6.4±0.6 5.6±0.5 5.1±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio , ±30° (dB) > 25 > 25 > 25 > 24 > 26 > 27 > 25 > 27
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20 > 18 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1000 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

215
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 749 x 226

(577)
Packing dimensions (H x W x D) (mm) 2980 x 1140 x 540 (Included pallet)
Antenna weight (kg) 71.5
Antenna packing weight (kg) 160.5 (Included clamps and pallet)
Radome material Fiberglass
Radome colour Light grey
2550

Operational temperature (℃) –40 to +65


1910

Frontal: 1555 (at 150 km/h)


Wind load (N) Lateral: 565 (at 150 km/h)
Maximum: 1980 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 8 x 4.3-10 Female
Connector position Bottom
63

Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-Z 11.3 kg 1
mast diameter: 60–115 mm
Downtilt kit-Z ASMDT0Z01 Mechanical downtilt: 0–8 ° 4.8 kg 1 (Separate packing)

207
Product Product
List Category
AQU4520R01v06
D04X-2x690-960/2x1695-2690-4x33-2x19i/2x20i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs – 2.6m

Pattern Sample for Reference

Left Antenna

690 - 960 MHz 1695 - 2690 MHz

Right Antenna

690 - 960 MHz 1695 - 2690 MHz

Port and Array Layout


L R
1–2 3–4 1–2 3–4

y1 y1

r1 r1

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……….Lr1

1–2 Rr1 690–960 HWxxxx……….Rr1

3–4 Ly1 1695–2690 HWxxxx……….Ly1

3–4 Ry1 1695–2690 HWxxxx……….Ry1

208
Product Product
List Category
AQU4520R01v06
D04X-2x690-960/2x1695-2690-4x33-2x19i/2x20i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs – 2.6m

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisychain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

209
Product Product
List Category
AQU4521R01v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x20.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°) 1–7, continuously adjustable, each band separately
separately
At mid tilt 15.2 15.6 15.9 16.2 17.5 19.1 19.6 20.1 20.7
Gain (dBi)
Over all tilts 15.0±0.6 15.4±0.5 15.7±0.5 16.0±0.6 17.4±0.5 18.9±0.6 19.5±0.5 19.9±0.5 20.6±0.6
Side lobe suppression for first
>15 >16 >15 >15 > 15 > 15 > 16 > 15 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 67±6 62±6 70±7 67±7 64±6 61±6 57±6
Vertical 3 dB beam width (°) 10.8±0.8 10.0±0.6 9.5±0.6 8.9±0.5 5.8±0.5 5.0±0.5 4.5±0.5 3.8±0.4 3.4±0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 25 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 22 > 23 > 23 > 24 > 25 > 24
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
– – – – – – – – –
Efficiency (dB) 0.70±0.1 0.80±0.1 0.90±0.2 1.00±0.2 0.85±0.2 0.90±0.2 0.95±0.2 1.10±0.2 1.10±0.2
5 5 0 0 0 0 0 5 5
Efficiency average (%) 85 83 81 79 82 81 80 78 77
Max. effective power per port
400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
(W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding
* Max. effective power whole antenna: 1200 W (at 50℃ ambient temperature)

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 429 x 196
Packing dimensions (H x W x D) (mm) 2370 x 515 x 235
(732)

Antenna weight (kg) 35.0


Antenna packing weight (kg) 45.8 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2099
1310

Operational temperature (℃) –40 to +65


Frontal: 534 (at 150 km/h)
Wind load (N) Lateral: 452 (at 150 km/h)
Maximum: 813 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
57

Unit: mm

210
Product Product
List Category
AQU4521R01v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x20.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Port and Array Layout


5–6 7–8

1–2 3–4
y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx……Rr2

5–6 Ly1 1427–2690 HWxxxx……Ly1

7–8 Ry2 1427–2690 HWxxxx…...Ry2

211
Product Product
List Category
AQU4521R01v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x20.5i-4xM-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

212
Product Product
List Category
AQU4521R2v06
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/21i/21i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
0–10, continuously adjustable, each band
Electrical downtilt (°) 1–7, continuously adjustable, each band separately
separately
At mid tilt 15.5 16.0 16.3 16.6 19.2 19.7 20.1 20.5
Gain (dBi)
Over all tilts 15.3±0.5 15.8±0.5 16.1±0.5 16.4±0.5 19.0±0.5 19.5±0.5 19.9±0.5 20.3±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16 > 16 > 15 > 15
lobe above main beam (Typ. ) (dB)
Horizontal 3 dB beam width (°) 65±6 61±5 60±5 58±5 66±5 64±5 60±5 58±5
Vertical 3 dB beam width (°) 8.6±0.8 7.8±0.5 7.5±0.5 7.1±0.5 4.1±0.4 3.7±0.4 3.3±0.4 3.0±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 24 > 25 > 25 > 25 > 25 > 25 > 27
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
1000 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 429 x 196
Packing dimensions (H x W x D) (mm) 2770 x 530 x 275
(706)
Antenna weight (kg) 40.5
Antenna packing weight (kg) 62.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2550

Operational temperature (℃) –40 to +65


Frontal: 649 (at 150 km/h)
Wind load (N) Lateral: 549 (at 150 km/h)
1787

Maximum: 988 (at 150 km/h)


Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
Connector position Bottom
57

Unit: mm

213
Product Product
List Category
AQU4521R2v06
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/21i/21i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 3–4

5–6 7–8

y1 y2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx…...Rr2

5–6 Ly1 1695–2690 HWxxxx……Ly1

7–8 Ry2 1695–2690 HWxxxx…...Ry2

214
Product Product
List Category
AQU4521R2v06
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/65-
17i/17i/21i/21i-M/M/M/M-R
EasyRET 8-Port 2L2H Antenna with 4 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry2)

215
Product Product
List Category
ASI4518R14v18
DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-2690-
65/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2) 2 x (2490–2690)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 (Ly1/Ry2)
Polarization +45°, –45°
0–14, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.8 14.2 14.4 14.5 16.7 16.9 17.8
Gain (dBi)
Over all tilts 13.7±0.5 14.1±0.5 14.3±0.5 14.4±0.5 16.5±0.5 16.8±0.5 17.6±0.5
Side lobe suppression for first
> 15 > 17 > 17 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±5 63±5 62±5 60±5 65±5 63±5 60±5
Vertical 3 dB beam width (°) 15.3±1.2 14.0±1.1 13.3±1.0 12.2±0.8 6.5±0.7 5.8±0.5 5.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 24 > 24 > 25 > 26 > 27 > 27
Cross polar ratio, 0° (dB) > 16 > 18 > 19 > 20 > 15 > 16 > 18
Max. effective power per port
500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
(W)
Max. effective power whole
960 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

(66)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1499 x 429 x 196
Packing dimensions (H x W x D) (mm) 1740 x 515 x 250
Antenna weight (kg) 28.8
Antenna packing weight (kg) 40.4 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1376
1499

Operational temperature (℃) –40 to +65


Frontal: 381 (at 150 km/h)
Wind load (N) Lateral: 323 (at 150 km/h)
Maximum: 581 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom
57

Unit: mm

216
Product Product
List Category
ASI4518R14v18
DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-2690-
65/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

1–2
5–6 7–8

3–4

9–10 11–12
b1 b2
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1
3–4 Rr2 690–960 HWxxxx……Rr2
5–6 Lb1 1695–2200 HWxxxx……Lb1

7–8 Rb2 1695–2200 HWxxxx……Rb2

9–10 Ly1 2490–2690 HWxxxx……Ly1

11–12 Ry2 2490–2690 HWxxxx……Ry2

217
Product Product
List Category
ASI4518R14v18
DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-2690-
65/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.4 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2200 MHz 2490–2690 MHz


(Lr1/Rr2) (Lb1/Rb2) (Ly1/Ry2)

218
Product Product
List Category
ASI4517R3v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 4 x (1695–2690) (LBy1/LTy2/RBy3/RTy4)
Frequency range (MHz) 1695– 1920– 2200– 2490–
690–803 790–862 824–894 880–960
1990 2200 2490 2690
Polarization +45°, –45°
0–10, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 14.9 15.5 15.8 16.0
Over all tilts 14.7±0.5 15.3±0.5 15.6±0.5 15.8±0.5
Gain At mid tilt 15.5 15.9 16.4 16.7
Bottom
(dBi) Over all tilts 15.4±0.5 15.8±0.5 16.3±0.4 16.6±0.6
At mid tilt 15.0 15.4 15.7 16.2
Top
Over all tilts 14.9±0.6 15.3±0.6 15.6±0.5 16.1±0.5
Side lobe suppression for first side
> 16 > 16 > 17 > 16 > 17 > 16 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±4 63±3 61±3 60±3 63±5 62±5 61±5 60±5
10.5±0.9 9.5±0.8 9.2±0.7 8.5±0.7
Vertical 3 dB
Bottom 10.4 ±0.6 9.4 ±0.5 8.1±0.3 7.4±0.3
beam width (°)
Top 9.7 ±0.6 8.9 ±0.5 7.9 ±0.3 7.1±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 22 > 25 > 25 > 24 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 20 > 20 > 20 > 20 > 20
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna
1000 (at 50℃ ambient temperature)
(W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 429 x 196
(669)

Packing dimensions (H x W x D) (mm) 2270 x 515 x 235


Antenna weight (kg) 33.0
Antenna packing weight (kg) 47.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
1273
1999

Connector 12 x 4.3-10 Female


Connector position Bottom
Frontal: 509 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 774 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
57

Unit: mm

219
Product Product
List Category
ASI4517R3v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2
7–8 11–12

3–4 y2 y4

5–6 9–10
y1 y3
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1
3–4 Rr2 690–960 HWxxxx……Rr2
5–6 LBy1 1695–2690 HWxxxx…LBy1

7–8 LTy2 1695–2690 HWxxxx…LTy2

9–10 RBy3 1695–2690 HWxxxx…RBy3

11–12 RTy4 1695–2690 HWxxxx…RTy4

220
Product Product
List Category
ASI4517R3v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LBy1/RBy3) (LTy2/RTy4)

221
Product Product
List Category
ASI4518R10v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 4 x (1695–2690) (LBy1/LTy2/RBy3/RTy4)
Frequency range (MHz) 1695– 1920– 2200– 2490–
690–803 790–862 824–894 880–960
1990 2200 2490 2690
Polarization +45°, –45°
0–10, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.8 16.5 16.7 17.0
Over all tilts 15.5±0.5 16.3±0.5 16.5±0.5 16.7±0.5
Gain At mid tilt 16.6 17.0 17.2 17.6
Bottom
(dBi) Over all tilts 16.4±0.6 16.8±0.5 17.0±0.5 17.4±0.5
At mid tilt 16.6 17.0 17.2 17.6
Top
Over all tilts 16.4±0.6 16.8±0.5 17.0±0.5 17.4±0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 17 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±5 65±5 62±5 60±5 65±5 63±5 61±5 60±5

Vertical 3 dB beam width (°) 8.8±0.7 8.0±0.6 7.8±0.5 7.5±0.5 7.0±0.7 6.0±0.5 5.5±0.4 5.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 26 > 26 > 26 > 26 > 27 > 27 > 28
Cross polar ratio, 0° (dB) > 17 > 18 > 19 > 20 > 15 > 16 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna
1200 (at 50℃ ambient temperature)
(W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties
(925)

Antenna dimensions (H x W x D) (mm) 2769 x 429 x 196


Packing dimensions (H x W x D) (mm) 2985 x 515 x 240
Antenna weight (kg) 39.0
Antenna packing weight (kg) 59.0 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
2769

Operational temperature (℃) –40 to +65


Connector 12 x 4.3-10 Female
1787

Connector position Bottom


Frontal: 705 (at 150 km/h)
Wind load (N) Lateral: 596 (at 150 km/h)
Maximum: 1073 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
57

Unit: mm

222
Product Product
List Category
ASI4518R10v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

5–6 1–2 9–10

y2 y4

3–4
7–8 11–12

y1 y3
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 LBy1 1695–2690 HWxxxx……LBy1

7–8 LTy2 1695–2690 HWxxxx……LTy2

9–10 RBy3 1695–2690 HWxxxx……RBy3

11–12 RTy4 1695–2690 HWxxxx……RTy4

2
223
Product Product
List Category
ASI4518R10v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (LBy1/LTy2/RBy3/RTy4)

1
224
Product Product
List Category
ASI4517R12v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15i/2x17i/
2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (LBy1/RBy3)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 14.1 14.7 14.9 15.2 15.7 16.3 16.6 17.2
Gain (dBi)
Over all tilts 14.0±0.5 14.6±0.5 14.8±0.5 15.0±0.5 15.6±0.6 16.2±0.5 16.5±0.5 17.0±0.5
Side lobe suppression for first
> 15 > 16 > 16 > 15 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 65±6 62±6 59±6 65±7 63±6 61±6 57±6
Vertical 3 dB beam width (°) 10.8±0.9 9.8±0.7 9.5±0.5 8.9±0.5 10.0±0.8 9.0±0.7 8.3±0.5 7.3±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 21 > 22 > 22 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 15 > 17 > 18 > 18
– – – –
Efficiency (dB) –1.46
0.80±0.15 0.85±0.15 0.95±0.20 1.00±0.20
Efficiency average (%) 72 83 82 80 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding
Electrical Properties
2 x (1427–2690) (LTy2/RTy4)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.8 15.7 16.3 16.6 17.1
Gain (dBi)
Over all tilts 14.7±0.8 15.6±0.6 16.2±0.6 16.5±0.6 17.0±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 64±6 63±6 62±6 57±6
Vertical 3 dB beam width (°) 12.4±0.8 10.2±0.8 9.2±0.7 8.2±0.6 7.3±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 15 > 15 > 18 > 18 > 18
Efficiency (dB) –0.80±0.15 –0.90±0.15 –1.00±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 83 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)

225
Product Product
List Category
ASI4517R12v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15i/2x17i/
2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 369 x 226
Packing dimensions (H x W x D) (mm) 2335 x 455 x 270

(586)
Antenna weight (kg) 32.8
Antenna packing weight (kg) 45 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65

2009
1355
Frontal: 362 (at 150 km/h)
Wind load (N) Lateral: 255 (at 150 km/h)
Maximum: 624 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom

68
Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

226
Product Product
List Category
ASI4517R12v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15i/2x17i/
2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Port and Array Layout

7–8 11–12

5–6 9–10

y2 y4

1–2 3–4

y1 y3
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 LBy1 1695–2690 HWxxxx……LBy1

7–8 LTy2 1427–2690 HWxxxx……LTy2

9–10 RBy3 1695–2690 HWxxxx……RBy3

11–12 RTy4 1427–2690 HWxxxx……RTy4

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

227
Product Product
List Category
ASI4517R12v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15i/2x17i/
2x17.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LTy2/RTy4) (LBy1/RBy3)

228
Product Product
List Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x16i/2x18i/2x18i-
6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (LBy1/RBy3)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 15.0 15.6 15.8 16.2 17.0 17.6 17.9 18.5
Gain (dBi)
Over all tilts 14.9±0.5 15.5±0.6 15.7±0.6 16.0±0.8 17.0±0.6 17.5±0.6 17.8±0.5 18.4±0.5
Side lobe suppression for first side
> 16 > 17 > 17 > 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 65±6 63±6 58±6 63±7 61±6 60±6 58±6
Vertical 3 dB beam width (°) 8.8±0.7 7.9±0.6 7.6±0.5 7.3±0.5 7.6±0.6 6.9±0.6 6.2±0.5 5.3±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio, ±30° (dB) > 20 > 22 > 22 > 24 > 27 > 28 > 27 > 28
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.60 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 69 84 83 80 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (LTy2/RTy4)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.6 18.1
Gain (dBi)
Over all tilts 15.2 ±0.7 16.7±0.6 17.3±0.5 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 63±7 61±6 60±6 58±6
Vertical 3 dB beam width (°) 9.5±0.7 7.6±0.6 6.9±0.6 6.2±0.6 5.3±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 26 > 27 > 27 > 28 > 28
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.95±0.20 –1.05±0.20 –1.10±0.20 –1.20±0.20 –1.25±0.25
Efficiency average (%) 80 79 78 76 75
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)

229
Product Product
List Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x16i/2x18i/2x18i-
6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2769 x 369 x 226
Packing dimensions (H x W x D) (mm) 2975 x 455 x 275

(801)
Antenna weight (kg) 41.7
Antenna packing weight (kg) 58.7 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

2769
Operational temperature (℃) –40 to +65
Frontal: 499 (at 150 km/h)
Wind load (N) Lateral: 352 (at 150 km/h)

1900
Maximum: 860 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom

68
Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

230
Product Product
List Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x16i/2x18i/2x18i-
6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Port and Array Layout


7–8 11–12

5–6 9–10

y2 y4

1–2 3–4

y1 y3
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……….Lr1
3–4 Rr2 690–960 HWxxxx……….Rr2
5–6 LBy1 1695–2690 HWxxxx……..LBy1

7–8 LTy2 1427–2690 HWxxxx……..LTy2

9–10 RBy3 1695–2690 HWxxxx…….RBy3

11–12 RTy4 1427–2690 HWxxxx…….RTy4

231
Product Product
List Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x16i/2x18i/2x18i-
6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LTy2/RTy4) (LBy1/RBy3)

232
Product Product
List Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–16, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.8 14.1 14.2 14.3 17.0 17.5 17.8 18.4
Gain (dBi)
Over all tilts 13.7±0.6 14.0±0.5 14.1±0.5 14.2±0.6 16.9±0.7 17.4±0.7 17.7±0.6 18.3±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 68±6 63±6 69±7 65±6 63±6 58±6
Vertical 3 dB beam width (°) 15.2±1.3 13.9±0.9 13.2±0.9 12.4±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 17 > 17 > 17 > 18
– – – –
Efficiency (dB) –1.34
0.75±0.15 0.80±0.15 0.95±0.20 1.00±0.20
Efficiency average (%) 74 84 83 80 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding
Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, -45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 17.2 17.5 17.9 18.5
Gain (dBi)
Over all tilts 15.7±0.9 17.1±0.8 17.4±0.6 17.8±0.6 18.4±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 69±6 66±6 62±6 58±6
Vertical 3 dB beam width (°) 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 18 > 17
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)

233
Product Product
List Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m

Mechanical Properties 68

(67)
Antenna dimensions (H x W x D) (mm) 1509 x 469 x 206
Packing dimensions (H x W x D) (mm) 1760 x 555 x 250
Antenna weight (kg) 29.0
Antenna packing weight (kg) 39.5 (Including clamps)
Radome material GFRPP*

1383
1509
Radome colour Light grey
Operational temperature (℃) –40 to +65
Connector 12 x 4.3-10 Female
Connector position Bottom
Frontal: 429 (at 150 km/h)
Wind load (N) Lateral: 329 (at 150 km/h)
Maximum: 562 (at 150 km/h)
Max. operational wind speed (km/h) 200

59
Survival wind speed (km/h) 250
Unit: mm
*GFRPP: Glass Fiber Reinforced Polypropylene

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

234
Product Product
List Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m

Port and Array Layout

7–8 9–10 11–12


5–6

y1 y2 y3 y4
1–2 3–4
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 Ly1 1695–2690 HWxxxx………Ly1

7–8 CLy2 1427–2690 HWxxxx……CLy2

9–10 CRy3 1427–2690 HWxxxx……CRy3

11–12 Ry4 1695–2690 HWxxxx……..Ry4

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

235
Product Product
List Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)

1
236
Product Product
List Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.0 15.2 15.4 15.5 17.4 17.9 18.3 18.7
Gain (dBi)
Over all tilts 14.9±0.6 15.1±0.5 15.3±0.5 15.4±0.6 17.3±0.7 17.8±0.6 18.2±0.5 18.6±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 67±6 62±6 69±7 64±6 63±6 58±6
Vertical 3 dB beam width (°) 10.9±0.8 10.0±0.7 9.6±0.6 9.0±0.5 6.5±0.9 5.8±0.7 5.3±0.6 4.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 22 > 23 > 24 > 25 > 24
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 16 > 16 > 16 > 17
– – – –
Efficiency (dB) –1.46
0.85±0.15 0.90±0.20 1.00±0.20 1.10±0.20
Efficiency average (%) 72 82 81 79 78
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.2 17.5 18.0 18.4 18.7
Gain (dBi)
Over all tilts 16.1±0.7 17.4±0.7 17.9±0.5 18.3±0.5 18.6±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 69±6 66±6 61±6 58±7
Vertical 3 dB beam width (°) 8.0±0.6 6.5±0.6 5.9±0.6 5.3±0.5 4.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 27
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 18 > 18
Efficiency (dB) –0.75±0.15 –0.85±0.15 –0.90±0.20 –1.00±0.20 –1.10±0.20
Efficiency average (%) 84 82 81 79 78
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)

237
Product Product
List Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Mechanical Properties 68

Antenna dimensions (H x W x D) (mm) 2009 x 469 x 206


Packing dimensions (H x W x D) (mm) 2265 x 555 x 255

(567)
Antenna weight (kg) 37.5
Antenna packing weight (kg) 52.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65

2009
1383
Connector 12 x 4.3-10 Female
Connector position Bottom
Frontal: 571 (at 150 km/h)
Wind load (N) Lateral: 438 (at 150 km/h)
Maximum: 748 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

59
*GFRPP: Glass Fiber Reinforced Polypropylene
Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

238
Product Product
List Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 7–8 9–10


11–12

y1 y2 y3 y4

1–2 r1 r2
3–4

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……Lr1
3–4 Rr2 690–960 HWxxxx……Rr2
5–6 Ly1 1695–2690 HWxxxx……Ly1

7–8 CLy2 1427–2690 HWxxxx……CLy2

9–10 CRy3 1427–2690 HWxxxx……CRy3

11–12 Ry4 1695–2690 HWxxxx……Ry4

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

239
Product Product
List Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x15.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)

240
Product Product
List Category
ASI4518R73v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (LTy2/RTy4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.6 16.4 16.6 16.8 16.9 17.2 17.5 18.0
Gain (dBi)
Over all tilts 15.5±0.6 16.2±0.6 16.4±0.6 16.7±0.6 16.7±0.8 17.0±0.6 17.3±0.6 17.8±0.6
Side lobe suppression for first side
> 16 > 17 > 17 > 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67±7 64±6 62±6 60±6 63±6 61±6 60±6 58±6
Vertical 3 dB beam width (°) 8.6±0.8 7.7±0.6 7.5±0.5 6.9±0.5 7.8±0.8 7.0±0.8 6.2±0.6 5.4±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio, ±30° (dB) > 21 > 22 > 24 > 24 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.25 –0.95±0.20 –1.00±0.20 –1.05±0.25 –1.20±0.25
Efficiency average (%) 75 80 79 78 76
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
Electrical Properties
2 x (1427–2690) (LBy1/RBy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 17.0 17.5 17.8 18.2
Gain (dBi)
Over all tilts 15.6±0.9 16.8±0.8 17.3±0.6 17.6±0.6 18.0±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±7 63±6 61±6 60±6 58±6
Vertical 3 dB beam width (°) 9.5±0.8 7.8±0.8 7.0±0.8 6.2±0.6 5.4±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥25 ≥27
Interband isolation (dB) ≥25 ≥27
Front to back ratio, ±30° (dB) > 23 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

241
Product Product
List Category
ASI4518R73v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 429 x 196

(851)
Packing dimensions (H x W x D) (mm) 2955 x 515 x 245
Antenna weight (kg) 38.0
Antenna packing weight (kg) 56.2 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

2695
1787
Operational temperature (℃) –40 to +65
Connector 12 x 4.3-10 Female
Connector position Bottom
Frontal: 686 (at 150 km/h)
Wind load (N) Lateral: 580 (at 150 km/h)
Maximum: 1044 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

57
Unit: mm

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

242
Product Product
List Category
ASI4518R73v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Port and Array Layout
1–2
5–6 9–10

y2 y4

3–4
7–8 11–12 y1 y3

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 LBy1 1427–2690 HWxxxx……LBy1

7–8 LTy2 1695–2690 HWxxxx……LTy2

9–10 RBy3 1427–2690 HWxxxx……RBy3

11–12 RTy4 1695–2690 HWxxxx……RTy4

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

243
Product Product
List Category
ASI4518R73v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (LTy2/RTy4) (LBy1/RBy3)

244
Product Product
List Category
ASI4516R0v07
DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Antenna Specifications

Electrical Properties
2 x (617–894) (Lr1/Rr2) 4 x (1695–2690) (Ly1/CLy2/CRy3/Ry4)
Frequency range (MHz)
617–698 698–798 814–894 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–14, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 14.3 14.9 15.4 17.0 17.2 17.6 18.0
Gain (dBi)
Over all tilts 14.1±0.6 14.8±0.5 15.2±0.6 16.9±0.5 17.2±0.5 17.5±0.5 17.9±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±5 67±6 63±6 65±6 62±5 61±5 60±6
Vertical 3 dB beam width (°) 13.0±1.3 10.9±1 9.6±0.8 7.4±0.6 6.6±0.5 5.8±0.4 5.3±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 24 > 24 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 17 > 17 > 17 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole
900 (at 50℃ ambient temperature)
antenna (W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206

(604)
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 43.0
Antenna packing weight (kg) 56.7 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
fOperational temperature (℃) –40 to +65
2099
1420

Frontal: 749 (at 150 km/h)


Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 988 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom
75

Unit: mm

245
Product Product
List Category
ASI4516R0v07
DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

7–8 9–10
5–6 11–12

1–2 3–4 y1 y2 y3 y4

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 617–894 HWxxxx………Lr1
3–4 Rr2 617–894 HWxxxx………Rr2
5–6 Ly1 1695–2690 HWxxxx………Ly1

7–8 CLy2 1695–2690 HWxxxx……CLy2

9–10 CRy3 1695–2690 HWxxxx……CRy3

11–12 Ry4 1695–2690 HWxxxx………Ry4

246
Product Product
List Category
ASI4516R0v07
DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

Pattern Sample for Reference

617–894 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/CLy2/CRy3/Ry4)

247
Product Product
List Category
ASI4521R01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x20.5i/2x20.5i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs – 2.0 m
Preliminary Issue

Antenna Specifications

Electrical Properties
2 x (690–960) 2 x (1695–2690)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45° +45°, –45°


2–12, continuously adjustable, each band 1–7, continuously adjustable, each band
Electrical downtilt (°)
separately separately
Gain (dBi) 15.2 15.6 15.9 16.2 19.1 19.6 20.1 20.7
Side lobe suppression for first
Typ.15 Typ.15 Typ.15 Typ.15 Typ.15 Typ.16 Typ.16 Typ.15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70 69 67 62 69 66 63 58

Vertical 3 dB beam width (°) 10.8 10.0 9.5 8.9 5.0 4.5 3.8 3.5

VSWR < 1.5 < 1.5

Cross polar isolation (dB) ≥ 26 ≥ 26

Interband isolation (dB) ≥ 26 ≥ 26

Front to back ratio, ±30° (dB) Typ.22 Typ.23 Typ.23 Typ.23 Typ.23 Typ.24 Typ.25 Typ.24

Cross polar ratio, 0° (dB) Typ.18 Typ.18 Typ.18 Typ.18 Typ.16 Typ.16 Typ.16 Typ.17

Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50 50

Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 1–7, continuously adjustable, each band separately
Gain (dBi) 17.5 19.1 19.6 20.1 20.7
Side lobe suppression for first
Typ.15 Typ.15 Typ.16 Typ.16 Typ.15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72 68 64 60 58
Vertical 3 dB beam width (°) 5.8 5.0 4.5 3.8 3.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) Typ.24 Typ.25 Typ.25 Typ.25 Typ.25
Cross polar ratio, 0° (dB) Typ.17 Typ.17 Typ.18 Typ.18 Typ.18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

248
Product Product
List Category
ASI4521R01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x20.5i/2x20.5i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs – 2.0 m
Preliminary Issue
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 469 x 206
Antenna weight (kg) 42.5
Frontal: 597 (at 150 km/h)
Wind load (N) Lateral: 458 (at 150 km/h)
Maximum: 781 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

249
Product Product
List Category
AOC4518R07v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x14.5i/2x18i/2x17.5i/2x18i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 1.5 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2) 2 x (2490–2690)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 (Ly1/Ry4)
Polarization +45°, –45° +45°, –45°
2–16, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.7 14.1 14.2 14.3 16.7 17.2 18.0
Gain (dBi)
Over all tilts 13.6±0.6 14.0±0.5 14.1±0.5 14.2±0.6 16.6±0.8 17.1±0.8 17.9±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 68±6 65±6 69±7 65±6 58±6
Vertical 3 dB beam width (°) 15.2±1.3 13.9±0.9 13.2±0.9 12.4±0.8 7.6±0.8 7.0±0.8 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 23 > 24 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 16 > 17 > 17
Efficiency (dB) –1.34 –0.95±0.20 –1.05±0.20 –1.15±0.20
Efficiency average (%) 74 80 78 77
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12 , continuously adjustable, each band separately
At mid tilt 15.7 17.3 17.7 18.2 18.5
Gain (dBi)
Over all tilts 15.5±0.9 17.0±0.8 17.5±0.8 18.0±0.6 18.3±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 69±6 67±6 62±6 58±7
Vertical 3 dB beam width (°) 8.9±0.9 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 17 > 18 > 18 > 17
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1550 W (at 50℃ ambient temperature)

250
Product Product
List Category
AOC4518R07v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x14.5i/2x18i/2x17.5i/2x18i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 1.5 m

68
Mechanical Properties

(67)
Antenna dimensions (H x W x D) (mm) 1509 x 469 x 206

Packing dimensions (H x W x D) (mm) 1760 x 555 x 250

Antenna weight (kg) 34.0

Antenna packing weight (kg) 45.5 (Including clamps)

Radome material GFRPP*

1383
1509
Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 16 x 4.3-10 Female

Connector position Bottom

Frontal: 429 (at 150 km/h)


Wind load (N) Lateral: 329 (at 150 km/h)
Maximum: 562 (at 150 km/h)

Max. operational wind speed (km/h) 200

59
Survival wind speed (km/h) 250
Unit: mm

*GFRPP: Glass Fiber Reinforced Polypropylene

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

251
Product Product
List Category
AOC4518R07v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x14.5i/2x18i/2x17.5i/2x18i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 1.5 m
Port and Array Layout

9–10 11–12 15–16


y1 y4

5–6 7–8

13–14

b1 y2 y3 b2
1–2 3–4
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 Lb1 1695–2200 HWxxxx………Lb1
7–8 Rb2 1695–2200 HWxxxx……..Rb2
9–10 Ly1 2490–2690 HWxxxx………Ly1
11–12 CLy2 1427–2690 HWxxxx…...CLy2
13–14 CRy3 1427–2690 HWxxxx……CRy3
15–16 Ry4 2490–2690 HWxxxx……..Ry4

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

252
Product Product
List Category
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (Ly1/Ry4)

253
Product Product
List Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x15.5i/2x17i/4x17.5i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 4 x (1695–2690) (LBy1/CLBy2/CRBy4/RBy6)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 14.9 15.1 15.3 15.4 15.6 16.3 16.6 17.4
Gain (dBi)
Over all tilts 14.8±0.6 15.0±0.5 15.2±0.5 15.3±0.6 15.5±0.7 16.2±0.8 16.5±0.7 17.2±0.8
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 68±6 63±6 69±7 65±6 63±6 58±6
Vertical 3 dB beam width (°) 10.9±0.8 10.0±0.7 9.6±0.6 9.0±0.5 10.1±1.0 8.9±0.9 7.9±0.8 7.0±0.7
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 22 > 24 > 24 > 24 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 16 > 18 > 18 > 17
– – – –
Efficiency (dB) –1.46
0.80±0.15 0.85±0.15 0.95±0.20 1.00±0.20
Efficiency average (%) 72 83 82 80 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding
Electrical Properties
2 x (1427–2690) (LTy3/RTy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.6 15.5 16.2 16.5 17.2
Gain (dBi)
Over all tilts 14.4±0.8 15.4±0.6 16.1±0.6 16.4±0.6 17.0±0.8
Side lobe suppression for first
> 15 > 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 65±6 62±6 62±6 59±7
Vertical 3 dB beam width (°) 12.2±1.0 10.1±1.0 8.9±0.9 7.9±0.8 7.0±0.7
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 16 > 18 > 18 > 17
Efficiency (dB) –0.80±0.15 –0.90±0.15 –1.00±0.2 –1.15±0.2 –1.20±0.25
Efficiency average (%) 83 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1600 W (at 50℃ ambient temperature)

254
Product Product
List Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x15.5i/2x17i/4x17.5i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m
68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 469 x 206

(605)
Packing dimensions (H x W x D) (mm) 2365 x 555 x 255

Antenna weight (kg) 38.5

Antenna packing weight (kg) 52.0 (Including clamps)

Radome material GFRPP*

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 16 x 4.3-10 Female

2099
1435
Connector position Bottom

Frontal: 597 (at 150 km/h)


Wind load (N) Lateral: 458 (at 150 km/h)
Maximum: 781 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

59
*GFRPP: Glass Fiber Reinforced Polypropylene
Unit: mm
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

255
Product Product
List Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x15.5i/2x17i/4x17.5i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Port and Array Layout


7–8 9–10 11–12

5–6 15–16
y3 y5

13–14

1–2 3–4 y1 y2 y4 y6

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…………Lr1
3–4 Rr2 690–960 HWxxxx………...Rr2
5–6 LBy1 1695–2690 HWxxxx………LBy1
7–8 CLBy2 1695–2690 HWxxxx……CLBy2
9–10 LTy3 1427–2690 HWxxxx………LTy3
11–12 CRBy4 1695–2690 HWxxxx…...CRBy4
13–14 RTy5 1427–2690 HWxxxx………RTy5
15–16 RBy6 1695–2690 HWxxxx………RBy6

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LTy3/RTy5) (LBy1/CLBy2/CRBy4/RBy6)

256
Product Product
List Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x15.5i/2x17i/4x17.5i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Port and Array Layout

7–8 9–10 11–12

5–6 15–16
y3 y5

13–14

1–2 3–4 y1 y2 y4 y6

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…………Lr1
3–4 Rr2 690–960 HWxxxx………...Rr2
5–6 LBy1 1695–2690 HWxxxx………LBy1
7–8 CLBy2 1695–2690 HWxxxx……CLBy2
9–10 LTy3 1427–2690 HWxxxx………LTy3
11–12 CRBy4 1695–2690 HWxxxx…...CRBy4
13–14 RTy5 1427–2690 HWxxxx………RTy5
15–16 RBy6 1695–2690 HWxxxx………RBy6

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

257
Product Product
List Category
AOC4518R19v09
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17.5i/4x18i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.6 16.0 16.2 16.4
Gain (dBi)
Over all tilts 15.5±0.5 15.9±0.5 16.1±0.5 16.3±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 67±6 65±6
Vertical 3 dB beam width (°) 8.8±0.8 8.1±0.6 7.8±0.6 7.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 23
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –1.60
Efficiency average (%) 69
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2690) (LTy3/RTy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.8 16.8 17.2 17.4 17.9
Gain (dBi)
Over all tilts 15.6±0.7 16.7±0.5 17.1±0.5 17.3±0.5 17.8±0.6
Side lobe suppression for first side
> 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 66±6 64±6 60±6 58±6
Vertical 3 dB beam width (°) 9.5±0.8 7.8±0.8 7.0±0.8 6.2±0.6 5.4±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 16 > 17 > 18 > 17 > 16
Efficiency (dB) –0.95±0.20 –1.00±0.20 –1.10±0.20 –1.20±0.25 –1.20±0.25
Efficiency average (%) 80 79 78 74 73
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

258
Product Product
List Category
AOC4518R19v09
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17.5i/4x18i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1695–2690) (CLBy2/CRBy4) 2 x (1695–2690) (LBy1/RBy6)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.9 17.4 17.6 18.1 16.8 17.3 17.6 18.1
Gain (dBi)
Over all tilts 16.8±0.6 17.3±0.6 17.5±0.5 18.0±0.5 16.7±0.6 17.2±0.6 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 66±6 60±6 58±6 70±7 67±6 60±6 58±6
Vertical 3 dB beam width (°) 7.8±0.8 7.0±0.8 6.2±0.6 5.5±0.5 7.8±0.8 7.0±0.8 6.2±0.6 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 17 > 16 > 17 > 18 > 17
Efficiency (dB) –0.75±0.15 –0.80±0.15 –0.95±0.2 –1.00±0.2 –0.75±0.15 –0.80±0.15 –0.95±0.2 –1.00±0.2
Efficiency average (%) 84 83 80 79 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1600 W (at 50℃ ambient temperature)

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 469 x 206
Packing dimensions (H x W x D) (mm) 2980 x 555 x 255
(695)

Antenna weight (kg) 46.2

Antenna packing weight (kg) 63.7 (Including clamps)

Radome material GFRPP*


2695

Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 16 x 4.3-10 Female


1925

Connector position Bottom

Frontal: 766 (at 150 km/h)


Wind load (N) Lateral: 588 (at 150 km/h)
Maximum: 1003 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


75

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm

259
Product Product
List Category
AOC4518R19v09
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17.5i/4x18i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

7–8 9–10 11–12

5–6 15–16
y3 y5

13–14

1–2 3–4
y1 y2 y4 y6

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 LBy1 1695–2690 HWxxxx…...LBy1
7–8 CLBy2 1695–2690 HWxxxx….CLBy2
9–10 LTy3 1427–2690 HWxxxx…….LTy3
11–12 CRBy4 1695–2690 HWxxxx….CRBy4
13–14 RTy5 1427–2690 HWxxxx…….RTy5
15–16 RBy6 1695–2690 HWxxxx…….RBy6

260
Product Product
List Category
AOC4518R19v09
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17.5i/4x18i
-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (LBy1/RBy6)

1427–2690 MHz 1695–2690 MHz


(LTy3/RTy5) (CLBy2/CRBy4)

261
Product Product
List Category
AOC4518R27v06
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x16i/2x18i/2x17.5i/ 2x18i/-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m
Preliminary Issue

Antenna Specifications

Electrical Properties
Frequency range (MHz) 2 x (690–960) 2 x (1695–2200) 2 x (2490–2690) 2 x (1427–2690)
Polarization +45°, –45° +45°, –45° +45°, –45° +45°, –45°
2–12, continuously 2–12, continuously 2–12, continuously 2–12, continuously
Electrical downtilt (°) adjustable, each band adjustable, each band adjustable, each band adjustable, each band
separately separately separately separately
Gain (dBi) 15.9 17.7 18.3 18.5
Side lobe suppression for first side
Typ.15 Typ.15 Typ.15 Typ.15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66 65 58 62
Vertical 3 dB beam width (°) 10.0 6.5 5.2 5.2
VSWR < 1.5 < 1.5 < 1.5 < 1.5
≥ 27
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
(≥ 26@1427–1518)
≥ 27
Interband isolation (dB) ≥ 27 ≥ 27 ≥ 27
(≥ 26@1427–1518)
400 (at 50℃ ambient 200 (at 50℃ ambient 200 (at 50℃ ambient 250 (at 50℃ ambient
Max. effective power per port (W)
temperature) temperature) temperature) temperature)
≤ –153 (2 x 43 dBm ≤ –150 (2 x 43 dBm ≤ –150 (2 x 43 dBm ≤ –153 (2 x 43 dBm
Intermodulation IM3 (dBc)
carrier) carrier) carrier) carrier)
Impedance (Ω) 50 50 50 50
Grounding DC grounding DC grounding DC grounding DC grounding

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 469 x 206
Antenna weight (kg) 40.0
Frontal: 571 (at 150 km/h)
Wind load (N) Lateral: 438 (at 150 km/h)
Maximum: 748 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
Connector position Bottom

262
Product Product
List Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/1695-
2690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (617–894) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
617–698 698–798 814–894 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 14.3 14.9 15.4 17.0 17.2 17.6 18.0
Gain (dBi)
Over all tilts 14.1±0.5 14.8±0.4 15.2±0.5 16.9±0.5 17.2±0.5 17.5±0.5 17.9±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±5 67±5 63±6 65±6 62±5 61±5 60±6
Vertical 3 dB beam width (°) 13.1±1.3 10.9±1 9.6±0.8 7.4±0.6 6.6±0.5 5.8±0.4 5.3±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 24 > 24 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 17 > 17 > 17 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2200) (Lb1/Rb2) 2 x (2490–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–1990 1920–2200 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.5 16.9 17.4
Gain (dBi)
Over all tilts 16.4±0.5 16.8±0.5 17.2±0.5
Side lobe suppression for first side
> 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±6 63±5 58±6
Vertical 3 dB beam width (°) 7.9±0.7 7.0±0.6 5.4±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 24 > 24 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

263
Product Product
List Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/1695-
2690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206

Packing dimensions (H x W x D) (mm) 2360 x 550 x 245

(604)
Antenna weight (kg) 46.0

Antenna packing weight (kg) 59.7 (Including clamps)

Radome material Fiberglass

Radome colour Light grey

Operational temperature (℃) –40 to +65

2099
1420
Connector 16 x 4.3-10 Female

Connector position Bottom

Frontal: 749 (at 150 km/h)


Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 988 (at 150 km/h)

75
Max. operational wind speed (km/h) 200 Unit: mm
Survival wind speed (km/h) 250

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

264
Product Product
List Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/1695-
2690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 11–12 7–8


9–10 15–16
y2 y3

13–14
1–2 3–4
y1 b1 b2 y4

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 617–894 HWxxxx………Lr1
3–4 Rr2 617–894 HWxxxx………Rr2
5–6 Lb1 1695–2200 HWxxxx………Lb1
7–8 Rb2 1695–2200 HWxxxx……..Rb2
9–10 Ly1 1695–2690 HWxxxx………Ly1
11–12 CLy2 2490–2690 HWxxxx…...CLy2
13–14 CRy3 2490–2690 HWxxxx……CRy3
15–16 Ry4 1695–2690 HWxxxx……..Ry4

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

265
Product Product
List Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/1695-
2690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 16-Port 2L6H Antenna with 8 Integrated RCUs – 2.0 m

Pattern Sample for Reference

617–894 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry4)

1695- 2200 MHz 2490–2690 MHz


(Lb1/Rb2) (CLy2/CRy3)

266
Product Product
List Category
A104518R1v07
D10X-2x690-960/2x1427-2690/6x1695-2690-10x65-2x16.5i/2x18i/6x18i-
10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 16.0 16.2 16.4
Gain (dBi)
Over all tilts 15.6±0.5 15.9±0.5 16.1±0.5 16.3±0.5
Side lobe suppression for first
> 15 > 16 > 16 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 67±6 65±5
Vertical 3 dB beam width (°) 8.8±0.8 8.1±0.6 7.8±0.6 7.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 27
Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 23
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –1.25
Efficiency average (%) 75
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy7)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.9 17.5 17.8 18.4
Gain (dBi)
Over all tilts 16.8±0.6 17.4±0.6 17.7±0.5 18.3±0.5
Side lobe suppression for first
> 16 > 16 > 16 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 67±6 60±6 58±6
Vertical 3 dB beam width (°) 7.8±0.8 7.0±0.5 6.2±0.6 5.5±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 17
Efficiency (dB) –0.65±0.15 –0.75±0.15 –0.85±0.20 –0.90±0.20
Efficiency average (%) 86 84 82 81
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

267
Product Product
List Category
A104518R1v07
D10X-2x690-960/2x1427-2690/6x1695-2690-10x65-2x16.5i/2x18i/6x18i-
10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1695–2690) (LTy2/RTy8) 2 x (1695–2690) (CLTy4/CRTy6)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.7 17.3 17.6 18.2 16.9 17.4 17.6 18.1
Gain (dBi)
Over all tilts 16.6±0.6 17.2±0.6 17.5±0.5 18.1±0.5 16.8±0.6 17.3±0.6 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 67±6 60±6 58±6 70±7 67±6 60±6 58±6
Vertical 3 dB beam width (°) 7.8±0.8 7.0±0.5 6.2±0.6 5.5±0.5 7.8±0.8 7.0±0.5 6.2±0.6 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 17 > 17 > 17 > 18 > 17
Efficiency (dB) –0.85±0.20 –0.95±0.20 –1.05±0.25 –1.10±0.25 –0.85±0.20 –0.95±0.20 –1.05±0.25 –1.10±0.25
Efficiency average (%) 82 80 79 78 82 80 79 78
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLBy3/CRBy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.8 17.1 17.5 17.9 18.5
Gain (dBi)
Over all tilts 15.7±0.7 17.0±0.7 17.4±0.5 17.8±0.5 18.4±0.6
Side lobe suppression for first
> 16 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 65±6 60±6 58±7
Vertical 3 dB beam width (°) 9.5±0.7 7.8±0.7 7.2±0.6 6.4±0.5 5.6±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 17 > 16
Efficiency (dB) –0.60±0.15 –0.65±0.15 –0.75±0.15 –0.85±0.20 –0.90±0.20
Efficiency average (%) 87 86 84 82 81
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

268
Product Product
List Category
A104518R1v07
D10X-2x690-960/2x1427-2690/6x1695-2690-10x65-2x16.5i/2x18i/6x18i-
10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.6 m

106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 469 x 206
Packing dimensions (H x W x D) (mm) 2980 x 555 x 255

(695)
Antenna weight (kg) 49.5
Antenna packing weight (kg) 67.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
Connector 20 x 4.3-10 Female

1925

2695
Connector position Bottom
Frontal: 766 (at 150 km/h)
Wind load (N) Lateral: 588 (at 150 km/h)
Maximum: 1003 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

75
*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

269
Product Product
List Category
A104518R1v07
D10X-2x690-960/2x1427-2690/6x1695-2690-10x65-2x16.5i/2x18i/6x18i-
10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.6 m
Port and Array Layout

11–12 15–16
7–8 19–20

5–6 17–18 y2 y4 y6 y8
9–10 13–14

1–2 3–4

y1 y3 y5 y7
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……….....Lr1
3–4 Rr2 690–960 HWxxxx……..…..Rr2
5–6 LBy1 1695–2690 HWxxxx………..LBy1
7–8 LTy2 1695–2690 HWxxxx………..LTy2
9–10 CLBy3 1427–2690 HWxxxx……..CLBy3
11–12 CLTy4 1695–2690 HWxxxx……..CLTy4
13–14 CRBy5 1427–2690 HWxxxx……..CRBy5
15–16 CRTy6 1695–2690 HWxxxx……..CRTy6
17-18 RBy7 1695–2690 HWxxxx……….RBy7
19-20 RTy8 1695–2690 HWxxxx……….RTy8

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

270
Product Product
List Category
A104518R1v07
D10X-2x690-960/2x1427-2690/6x1695-2690-10x65-2x16.5i/2x18i/6x18i-
10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.6 m
Pattern sample for reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (LBy1/LTy2/CLTy4/CRTy6/RBy7/RTy8) (CLBy3/CRBy5)

271
Product Product
List Category
A104518R04v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1695-2200/2x2490-2690
-10x65-2x15.5i/2x18i/2x18i/2x18i/2x18i-10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.2 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.8 15.0 15.2 15.4
Gain (dBi)
Over all tilts 14.7±0.6 14.9±0.5 15.1±0.5 15.3±0.6
Side lobe suppression for first
> 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 67±6 65±6
Vertical 3 dB beam width (°) 10.9±0.8 10.0±0.6 9.5±0.5 8.9±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –1.43
Efficiency average (%) 72
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2690) (LTy2/RTy6)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt 15.3 16.8 17.4 17.6 17.9
Gain (dBi)
Over all tilts 15.2±0.9 16.7±0.8 17.3±0.7 17.5±0.6 17.8±0.6
Side lobe suppression for first
> 15 > 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 66±6 63±6 61±6 58±6
Vertical 3 dB beam width (°) 9.5±0.8 7.8±0.6 7.0±0.6 6.3±0.5 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 22 > 25 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 17 > 16
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

272
Product Product
List Category
A104518R04v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1695-2200/2x2490-2690
-10x65-2x15.5i/2x18i/2x18i/2x18i/2x18i-10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.2 m

Electrical Properties
2 x (1695–2200) (Lb1/Rb2) 2 x (2490–2690) (CLy3/CRy4)
Frequency range (MHz)
1695–1990 1920–2200 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–11, continuously adjustable, each band separately
At mid tilt 17.2 17.7 18.3
Gain (dBi)
Over all tilts 17.2±0.8 17.7±0.7 18.3±0.6
Side lobe suppression for first
> 15 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±6 65±6 58±6
Vertical 3 dB beam width (°) 6.2±0.5 5.6±0.5 4.5±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 18 > 17
Efficiency (dB) –1.50 –1.50 –1.85
Efficiency average (%) 71 71 65
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy5)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.9 17.5 17.7 18.2
Gain (dBi)
Over all tilts 16.8±0.8 17.4±0.8 17.6±0.6 18.1±0.6
Side lobe suppression for first
> 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67±6 65±6 61±6 58±6
Vertical 3 dB beam width (°) 7.9±0.8 7.0±0.7 6.3±0.5 5.5±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 18 > 17 > 17
Efficiency (dB) –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1750 W (at 50℃ ambient temperature)

273
Product Product
List Category
A104518R04v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1695-2200/2x2490-2690
-10x65-2x15.5i/2x18i/2x18i/2x18i/2x18i-10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.2 m
68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2249 x 469 x 206

(814)
Packing dimensions (H x W x D) (mm) 2505 x 555 x 255
Antenna weight (kg) 45.0
Antenna packing weight (kg) 63.5 (Including clamps)
Radome material GFRPP*
Radome colour Light grey

2249
Operational temperature (℃) –40 to +65

Connector 20 x 4.3-10 Female

Connector position Bottom

1435
Frontal: 639 (at 150 km/h)
Wind load (N) Lateral: 490 (at 150 km/h)
Maximum: 837 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene

59
Windload Polar Chart Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

274
Product Product
List Category
A104518R04v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1695-2200/2x2490-2690
-10x65-2x15.5i/2x18i/2x18i/2x18i/2x18i-10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.2 m
Port and Array Layout

9–10 5–6 7–8 17–18

y3 y4

11–12 y2 y6
19–20

13–14 15–16

3–4
1–2 b1 b2
y1 y5

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………Lr1

3–4 Rr2 690–960 HWxxxx…..…Rr2

5–6 Lb1 1695–2200 HWxxxx…..…Lb1

7–8 Rb2 1695–2200 HWxxxx….…Rb2

9–10 LBy1 1695–2690 HWxxxx……LBy1

11–12 LTy2 1427–2690 HWxxxx……LTy2

13–14 CLy3 2490–2690 HWxxxx……CLy3

15–16 CRy4 2490–2690 HWxxxx……CRy4

17-18 RBy5 1695–2690 HWxxxx……RBy5

19-20 RTy6 1427–2690 HWxxxx……RTy6

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

275
Product Product
List Category
A104518R04v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1695-2200/2x2490-2690
-10x65-2x15.5i/2x18i/2x18i/2x18i/2x18i-10xM-R
EasyRET 20-Port 2L8H Antenna with 10 Integrated RCUs – 2.2 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (LTy2/RTy6) (LBy1/RBy5)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (CLy3/CRy4)

276
Product Product
List Category
B. Passive Antenna
Multi-band
B - 5 3L2H&3L5H&3L6H&3L8H

10 Ports - 3L2H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-862 16 2-12
880-960 16.5 2-12
690-960 5 x 65 17 2-12 10 x 4.3-10 2769 x 469 x 206 APE4518R25v07 Pearl 279
1427-2690 17.5 2-12
1695-2690 18 2-12

16 Ports - 3L5H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-862 16 2-12
880-960 16.5 2-12
690-960 8 x 65 17 2-12 16 x 4.3-10 2769 x 469 x 206 AOC4518R0v06 Pearl 283
1427-2690 17.5 2-12
4x1695-2690 4 x 17.5 4 x 2-12

18 Ports - 3L6H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-862 14.5 2–12


880-960 15 2–12
690-960 15.5 2–12
2x1427-2690
9 x 65
2x18 2 x 2-12
18 x 4.3-10 2009 x 469 x 206 A094518R01v06 MUC 287
2x1695-2200 2x17.5 2 x 2-12
2x2490-2690 2x18 2 x 2-12

3x690-960 3x14 3 x 2-12


2x1427-2690 9 x 65 2x18 2 x 2-12 18 x 4.3-10 2249 x 499 x 206 A094518R09v06 Paris 292
4x1695-2690 4x18 4 x 2-12

22 Ports - 3L8H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

3x690-960 3x14 3 x 2-12


2x1427-2690 11 x 65 2x18 2 x 2-12 22 x 4.3-10 2249 x 499 x 206 A114518R1v06 Paris 296
6x1695-2690 4x18 4 x 2-12

277
Product
Category
Multi-band
B - 5 3L12H

30 Ports - 3L12H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-862 15.5 2-12


880-960 16 2-12
690-960 16.5 2-12
2x1695-2690 2x17.5 2 x 2-12 10 x 4.3-10
2x1695-1880 15 x 65 2x16.5 2 x 2-12 Female +5 x 2769 x 469 x 206 A154517R0v06 MUC 301
2x2300-2690 2x17.5 2 x 2-12 MQ4 Male
2x1427-1880 2x16 2 x 2-12
2x2300-2690 2x17 2 x 2-12
2x1695-2690 2x17.5 2 x 2-12

278
Product
Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-
65/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 10-Port 3L2H Antenna with 5 Integrated RCUs – 2.6 m
Antenna Specifications

Electrical Properties
690–862 (Lr1) 880–960 690–960 (Rr3)
Frequency range (MHz)
690–803 790–862 (Lr2) 690–803 790–862 824–894 880–960
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.4 16.0 16.5 15.8 16.3 16.6 16.9
Gain (dBi)
Over all tilts 15.2±0.5 15.9±0.5 16.2±0.5 15.6±0.5 16.2±0.5 16.4±0.5 16.6±0.5
Side lobe suppression for first side
>15 >15 >16 >15 >15 >16 >16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±5 69±5 65±4 70±5 69±5 68±4 65±4
Vertical 3 dB beam width (°) 8.3±0.5 7.4±0.5 6.4±0.4 8.7±0.7 7.8±0.6 7.5±0.6 7.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 22 > 23 > 25 > 22 > 24 > 24 > 25
Cross polar ratio, 0° (dB) > 19 > 22 > 22 > 19 > 21 > 22 > 22
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
1427–2690 (Ly1) 1695–2690 (Ry2)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.2 17.3 17.4 17.8 18.0 17.1 17.4 17.5 18.0
Gain (dBi)
Over all tilts 16.1±0.5 17.2±0.6 17.3±0.6 17.7±0.5 17.8±0.5 17.0±0.6 17.3±0.6 17.4±0.6 17.8±0.7
Side lobe suppression for first
> 15 > 16 > 16 > 16 > 15 > 16 > 17 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 62±7 61±7 62±6 58±6 58±5 62±6 61±5 60±5 58±5
Vertical 3 dB beam width (°) 7.9±0.4 6.5±0.4 5.8±0.4 5.2±0.4 4.8±0.4 6.5±0.5 5.7±0.5 5.2±0.4 4.8±0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 28 > 28 > 28 > 28 > 26 > 26 > 27 > 27
Cross polar ratio, 0° (dB) > 15 > 16 > 16 > 16 > 15 > 22 > 20 > 18 > 18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

279
Product Product
List Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-
65/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 10-Port 3L2H Antenna with 5 Integrated RCUs – 2.6 m

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2769 x 469 x 206
Packing dimensions (H x W x D) (mm) 2960 x 545 x 275

(823)
Antenna weight (kg) 46.5
Antenna packing weight (kg) 71.8 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65

2769
Connector 10 x 4.3-10 Female

1873
Connector position Bottom
Frontal: 787 (at 150 km/h)
Wind load (N) Lateral: 604 (at 150 km/h)
Maximum: 1031 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

73
Unit: mm
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

280
Product Product
List Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-
65/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 10-Port 3L2H Antenna with 5 Integrated RCUs – 2.6 m

Port and Array Layout

1–2 7–8
9–10
r2

3–4 5–6 y1 y2
r1 r3

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–862 HWxxxx……Lr1

3–4 Lr2 880–960 HWxxxx……Lr2

5–6 Rr3 690–960 HWxxxx……Rr3

7–8 Ly1 1427–2690 HWxxxx……Ly1

9–10 Ry2 1695–2690 HWxxxx……Ry2

Pattern Sample for Reference

690–862 MHz 880–960 MHz 690–960 MHz


(Lr1) (Lr2) (Rr3)

1427–2690 MHz 1695–2690 MHz


(Ly1) (Ry2)

281
Product Product
List Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-
65/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 10-Port 3L2H Antenna with 5 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

282
Product Product
List Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 16-Port 3L5H Antenna with 8 Integrated RCUs – 2.6 m
Antenna Specifications

Electrical Properties
690–862 (Lr1) 880–960 690–960 (Rr3)
Frequency range (MHz)
690–803 790–862 (Lr2) 690–803 790–862 824–894 880–960
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.4 16.0 16.5 15.8 16.4 16.7 16.9
Gain (dBi)
Over all tilts 15.2±0.5 15.9±0.5 16.2±0.5 15.6±0.5 16.3±0.5 16.5±0.5 16.7±0.5
Side lobe suppression for first
> 15 > 15 > 16 > 15 > 15 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±5 69±4 64±4 70±5 69±4 68±3 64±4
Vertical 3 dB beam width (°) 8.3±0.5 7.4±0.4 6.4±0.3 9.0±0.5 8.0±0.4 7.7±0.5 7.2±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio,±30° (dB) > 22 > 24 > 25 > 22 > 24 > 24 > 25
Cross polar ratio, 0° (dB) > 20 > 24 > 24 > 20 > 24 > 24 > 24
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
1427–2690 (Cy3) 4 x (1695–2690) (LBy1/LTy2/RBy4/RTy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.2 17.3 17.4 17.9 18.0
Over all tilts 16.1±0.5 17.2±0.5 17.3±0.5 17.8±0.5 17.9±0.5
Gain At mid tilt 16.6 17.0 17.2 17.7
Bottom
(dBi) Over all tilts 16.5±0.5 16.9±0.5 17.1±0.5 17.5±0.5
At mid tilt 16.7 17.1 17.2 17.7
Top
Over all tilts 16.6±0.5 17.0±0.5 17.1±0.5 17.5±0.5
Side lobe suppression for first
> 15 > 16 > 16 > 17 > 17 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 62±7 61±7 62±6 58±5 58±5 61±5 61±5 59±4 58±4
7.9±0.4 6.6±0.4 5.8±0.3 5.2±0.3 4.8±0.2
Vertical 3 dB
Bottom 7.6±0.5 6.7±0.4 6.0±0.3 5.4±0.3
beam width (°)
Top 6.5±0.5 5.8±0.4 5.2±0.3 4.8±0.3
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 28 > 28 > 28 > 28 > 25 > 25 > 25 > 26
Cross polar ratio, 0° (dB) > 15 > 18 > 16 > 16 > 15 > 20 > 18 > 17 > 18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

283
Product Product
List Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 16-Port 3L5H Antenna with 8 Integrated RCUs – 2.6 m

Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 2769 x 469 x 206

(823)
Packing dimensions (H x W x D) (mm) 2960 x 545 x 275

Antenna weight (kg) 52.8

Antenna packing weight (kg) 78.3 (Including clamps)

Radome material Fiberglass

2769
Radome colour Light grey

Operational temperature (℃) –40 to +65

Connector 16 x 4.3-10 Female

1873
Connector position Bottom

Frontal: 787 (at 150 km/h)


Wind load (N) Lateral: 604 (at 150 km/h)
Maximum: 1031 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

73
Unit: mm
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

284
Product Product
List Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 16-Port 3L5H Antenna with 8 Integrated RCUs – 2.6 m
Port and Array Layout

1–2 7–8 11–12 13–14 r2

y2 y5

9–10 15–16
3–4 5–6 y1 y3 y4
r1 r3

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–862 HWxxxx………Lr1
3–4 Lr2 880–960 HWxxxx………Lr2
5–6 Rr3 690–960 HWxxxx….....Rr3
7–8 LBy1 1695–2690 HWxxxx…....LBy1
9–10 LTy2 1695–2690 HWxxxx…....LTy2
11–12 Cy3 1427–2690 HWxxxx….....Cy3
13–14 RBy4 1695–2690 HWxxxx…...RBy4
15–16 RTy5 1695–2690 HWxxxx…...RTy5

Pattern Sample for Reference

690–862 MHz 880–960 MHz 690–960 MHz


(Lr1) (Lr2) (Rr3)

1427–2690MHz 1695–2690 MHz 1695–2690 MHz


(Cy3) (LBy1/RBy4) (RTy2/RTy5)

285
Product Product
List Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 16-Port 3L5H Antenna with 8 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

286
Product Product
List Category
A094518R01v06
D09X-690-862/880-960/690-960/2x1427-2690/2x1695-2200/2x2490-
2690-9x65-14.5i/15i/15.5i/2x18i/2x17.5i/2x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.0 m
Antenna Specifications

Electrical Properties
690–862 (Lr1) 880–960 (Lr2) 690–960 (Rr3)
Frequency range (MHz)
690–803 790–862 880–960 690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.5 14.8 15.2 14.8 15.1 15.4 15.6
Gain (dBi)
Over all tilts 14.4±0.6 14.7±0.5 15.1±0.6 14.7±0.6 15.0±0.5 15.3±0.5 15.5±0.6
Side lobe suppression for first side
> 15 > 15 > 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 65±6 70±7 69±6 68±6 64±6
Vertical 3 dB beam width (°) 11.1±0.9 10.2±0.9 9.0±0.8 11.0±0.8 10.1±0.8 9.6±0.7 8.9±0.7
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 23 > 22 > 22 > 22 > 23
Cross polar ratio, 0° (dB) > 17 > 18 > 17 > 18 > 18 > 18 > 18
Efficiency (dB) –1.59 –1.46
Efficiency average (%) 69 72
Max. effective power per port (W) 350 (at 50℃ ambient temperature)* 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.6 17.0 17.5 17.9 18.4
Gain (dBi)
Over all tilts 15.5±0.9 16.9±0.7 17.4±0.7 17.8±0.6 18.3±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 69±6 66±6 61±6 58±7
Vertical 3 dB beam width (°) 8.9±0.9 7.2±0.8 6.5±0.8 5.7±0.7 5.1±0.6
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 17 > 18 > 17 > 17
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

287
Product Product
List Category
A094518R01v06
D09X-690-862/880-960/690-960/2x1427-2690/2x1695-2200/2x2490-
2690-9x65-14.5i/15i/15.5i/2x18i/2x17.5i/2x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.0 m

Electrical Properties
2 x (1695–2200) (Lb1/Rb2) 2 x (2490–2690) (Ly1/Ry4)
Frequency range (MHz)
1695–1990 1920–2200 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.7 17.2 18.0
Gain (dBi)
Over all tilts 16.6±0.8 17.1±0.8 17.9±0.6
Side lobe suppression for first side
> 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±7 66±6 58±6
Vertical 3 dB beam width (°) 7.6±0.8 7.0±0.8 5.5±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 24 > 24 > 25
Cross polar ratio, 0° (dB) > 16 > 17 > 17
Efficiency (dB) –0.95±0.20 –1.05±0.20 –1.15±0.20
Efficiency average (%) 80% 78% 77%
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

*Max. effective power whole antenna: 1700 W (at 50℃ ambient temperature)

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 469 x 206
Packing dimensions (H x W x D) (mm) 2265 x 555 x 255 (567)
Antenna weight (kg) 40.0
Antenna packing weight (kg) 53.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
2009
1383

Connector 18 x 4.3-10 Female


Connector position Bottom
Frontal: 571 (at 150 km/h)
Wind load (N) Lateral: 438 (at 150 km/h)
Maximum: 748 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene


59

Unit: mm

288
Product Product
List Category
A094518R01v06
D09X-690-862/880-960/690-960/2x1427-2690/2x1695-2200/2x2490-
2690-9x65-14.5i/15i/15.5i/2x18i/2x17.5i/2x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–862 MHz 880–960 MHz 690–960 MHz


(Lr1) (Lr2) (Rr3)

1427–2690 MHz 1695–2200 MHz 2490–2690 MHz


(CLy2/CRy3) (Lb1/Rb2) (Ly1/Ry4)

289
Product Product
List Category
A094518R01v06
D09X-690-862/880-960/690-960/2x1427-2690/2x1695-2200/2x2490-
2690-9x65-14.5i/15i/15.5i/2x18i/2x17.5i/2x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.0 m
Port and Array Layout

11–12 13–14 15–16


r2
1–2
17–18
y1 y4

7–8 9–10

3–4 5–6 b1 y2 y3 y4
b2
r1 r3

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–862 HWxxxx……….Lr1

3–4 Lr2 880–960 HWxxxx……….Lr2

5–6 Rr3 690–960 HWxxxx……….Rr3

7–8 Lb1 1695–2200 HWxxxx……….Lb1

9–10 Rb2 1695–2200 HWxxxx……….Rb2

11–12 Ly1 2490–2690 HWxxxx……….Ly1

13–14 CLy2 1427–2690 HWxxxx………CLy2

15–16 CRy3 1427–2690 HWxxxx………CRy3

17-18 Ry4 2490–2690 HWxxxx………..Ry4

290
Product Product
List Category
A094518R01v06
D09X-690-862/880-960/690-960/2x1427-2690/2x1695-2200/2x2490-
2690-9x65-14.5i/15i/15.5i/2x18i/2x17.5i/2x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.0 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

291
Product Product
List Category
A094518R09v06
D09X-3x690-960/2x1427-2690/4x1695-2690-9x65-
3x14i/2x18i/4x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.2 m
Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr3) 690–960 (Cr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 690–803 790–862 824–894 880–960
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.4 13.8 13.9 14.2 13.5 13.8 13.9 14.2
Gain (dBi)
Over all tilts 13.4±0.5 13.8±0.5 13.9±0.5 14.1±0.5 13.5±0.6 13.8±0.6 13.9±0.6 14.1±0.6
Side lobe suppression for first side
> 15 > 15 > 15 > 15 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 71±8 68±8 66±6 61±6 69±6 68±8 66±8 62±6
Vertical 3 dB beam width (°) 17.0±1.8 15.3±1.5 14.8±1.2 13.9±1.2 18±1.8 16.1±1.5 15.3±1.2 14.6±1.2
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 22 ≥ 25 ≥ 22 ≥ 25
Interband isolation (dB) ≥ 22 ≥ 25 ≥ 22 ≥ 25
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.10 –1.00
Efficiency average (%) 78 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy5) 2 x (1695–2690) (LTy2/RTy6)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.8 17.4 17.8 18.3 16.8 17.4 17.7 18.0
Gain (dBi)
Over all tilts 16.7±0.8 17.3±0.6 17.7±0.5 18.2±0.5 16.7±0.7 17.3±0.5 17.6±0.5 18.0±0.5
Side lobe suppression for first side
> 17 > 18 > 16 > 17 > 17 > 18 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±6 65±6 62±5 58±6 66±6 64±6 62±5 58±5
Vertical 3 dB beam width (°) 8.1±0.6 7.4±0.6 6.4±0.5 5.7±0.4 8.1±0.6 7.5±0.6 6.5±0.5 5.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 24 > 25 > 26 > 26 > 25
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 84 83 80 79 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

292
Product Product
List Category
A094518R09v06
D09X-3x690-960/2x1427-2690/4x1695-2690-9x65-
3x14i/2x18i/4x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.2 m

Electrical Properties
2 x (1427–2690) (CLy3/CRy4)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.4 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 15.3±0.7 16.8±0.7 17.3±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first
> 17 > 18 > 18 > 16 > 17
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 66±6 64±6 62±6 58±7
Vertical 3 dB beam width (°) 9.8±0.7 8.0±0.7 7.4±0.6 6.6±0.5 5.7±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 25 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2249 x 499 x 206

(739)
Packing dimensions (H x W x D) (mm) 2520 x 560 x 255

Antenna weight (kg) 43.2

Antenna packing weight (kg) 62.5 (Including clamps)

Radome material GFRPP*

Radome colour Light grey


2249

Operational temperature (℃) –40 to +65

Connector 18 x 4.3-10 Female


1435

Connector position Bottom

Frontal: 802 (at 150 km/h)


Wind load (N) Lateral: 461 (at 150 km/h)
Maximum: 1058 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


75

*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm

293
Product Product
List Category
A094518R09v06
D09X-3x690-960/2x1427-2690/4x1695-2690-9x65-
3x14i/2x18i/4x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.2 m
Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Windload Polar Chart

Port and Array Layout

r1 r3
11–12 3–4 13–14
7–8 17–18

y2 y6

9–10 15–16
1–2 5–6

y1 y3 y4 y5

r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx………...Lr1

3–4 Cr2 690–960 HWxxxx…….…..Cr2

5–6 Rr3 690–960 HWxxxx………...Rr3

7–8 LBy1 1695–2690 HWxxxx……….LBy1

9–10 LTy2 1695–2690 HWxxxx……….LTy2

11–12 CLy3 1427–2690 HWxxxx……….CLy3

13–14 CRy4 1427–2690 HWxxxx………CRy4

15–16 RBy5 1695–2690 HWxxxx………RBy5

17-18 RTy6 1695–2690 HWxxxx……….RTy6

294
Product Product
List Category
A094518R09v06
D09X-3x690-960/2x1427-2690/4x1695-2690-9x65-
3x14i/2x18i/4x18i-9xM-R
EasyRET 18-Port 3L6H Antenna with 9 Integrated RCUs – 2.2 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern sample for reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Cr2/Rr3) (LBy1/LTy2/RBy5/RTy6) (CLy3/CRy4)

295
Product Product
List Category
A114518R1v06
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-
3x14i/2x18i/6x18i-11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m
Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr3) 690–960 (Cr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 690–803 790–862 824–894 880–960
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.5 13.9 14.0 14.2 13.5 13.9 14.0 14.2
Gain (dBi)
Over all tilts 13.5±0.5 13.9±0.5 14.0±0.5 14.2±0.5 13.5±0.5 13.9±0.5 14.0±0.5 14.2±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 15 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 71±8 68±8 67±6 65±5 69±6 68±8 66±8 63±6
Vertical 3 dB beam width (°) 17.0±1.8 15.3±1.5 14.8±1.2 13.9±1.2 18.0±1.8 16.5±1.5 15.8±1.2 14.6±1.2
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 25
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.10 –1.00
Efficiency average (%) 78 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy7)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 16.7±0.8 17.3±0.6 17.7±0.5 18.2±0.5
Side lobe suppression for first side
> 17 > 17 > 16 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±6 65±6 62±5 58±6
Vertical 3 dB beam width (°) 8.1±0.6 7.4±0.6 6.4±0.5 5.7±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 24
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18
Efficiency (dB) –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

296
Product Product
List Category
A114518R1v06
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-
3x14i/2x18i/6x18i-11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Electrical Properties
2 x (1695–2690) (LTy2/RTy8) 2 x (1695–2690) (CLTy4/CRTy6)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.7 17.3 17.6 18.0 16.7 17.3 17.6 18.0
Gain (dBi)
Over all tilts 16.6±0.7 17.2±0.5 17.5±0.5 18.0±0.5 16.6±0.7 17.2±0.5 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 17 > 17 > 17 > 16 > 17 > 16 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±6 64±6 62±5 58±5 66±6 64±6 62±5 58±5
Vertical 3 dB beam width (°) 8.1±0.6 7.5±0.6 6.5±0.5 5.7±0.5 8.1±0.6 7.5±0.6 6.5±0.5 5.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 25 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 81 80 77 76 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLBy3/CRBy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 15.2±0.7 16.8±0.7 17.3±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first
> 17 > 18 > 18 > 16 > 17
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 66±6 64±6 62±6 58±7
Vertical 3 dB beam width (°) 9.8±0.7 8.0±0.7 7.4±0.6 6.6±0.5 5.7±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 25 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 2000 W (at 50℃ ambient temperature)

297
Product Product
List Category
A114518R1v06
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-
3x14i/2x18i/6x18i-11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2249 x 499 x 206
Packing dimensions (H x W x D) (mm) 2520 x 560 x 255

(739)
Antenna weight (kg) 48.0
Antenna packing weight (kg) 65.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65

1435
2249
Connector 22 x 4.3-10 Female
Connector position Bottom
Frontal: 802 (at 150 km/h)
Wind load (N) Lateral: 461 (at 150 km/h)
Maximum: 1058 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

75
*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

298
Product Product
List Category
A114518R1v06
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-
3x14i/2x18i/6x18i-11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Port and Array Layout

r1 r3
11–12 3–4 15–16
7–8 19–20

y2 y4 y6 y8
9–10 13–14 17–18 21–22

1–2 5–6

y1 y3 y5 y7
r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……….....Lr1
3–4 Cr2 690–960 HWxxxx……..…..Cr2
5–6 Rr3 690–960 HWxxxx………....Rr3
7–8 LBy1 1695–2690 HWxxxx………..LBy1
9–10 LTy2 1695–2690 HWxxxx………..LTy2
11–12 CLBy3 1427–2690 HWxxxx……..CLBy3
13–14 CLTy4 1695–2690 HWxxxx……..CLTy4
15–16 CRBy5 1427–2690 HWxxxx……..CRBy5
17-18 CRTy6 1695–2690 HWxxxx……..CRTy6
19-20 RBy7 1695–2690 HWxxxx……….RBy7
21-22 RTy8 1695–2690 HWxxxx……….RTy8

299
Product Product
List Category
A114518R1v06
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-
3x14i/2x18i/6x18i-11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern sample for reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Cr2/Rr3) (LBy1/LTy2/CLTy4/CRTy6/RBy7/RTy8) (CLBy3/CRBy5)

300
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Antenna Specifications

Electrical Properties
690–862 (Lr1) 880–960 690–960 (Rr3)
Frequency range (MHz)
690–803 790–862 (Lr2) 690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.6 15.8 16.2 15.7 16.0 16.2 16.4
Gain (dBi)
Over all tilts 15.5±0.5 15.7±0.5 16.0±0.5 15.6±0.5 15.9±0.5 16.0±0.5 16.2±0.5
Side lobe suppression for first
> 15 > 15 > 16 > 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 68±6 67±6 70±6 69±6 68±6 66±6
Vertical 3 dB beam width (°) 8.2±0.6 7.4±0.5 6.4±0.5 8.8±0.7 7.9±0.5 7.6±0.5 7.2±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 21 > 22 > 22 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. effective power per port (W) 350 (at 50℃ ambient temperature)* 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy4) 2 x (1695–2690) (RTy5)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°) 2–12, continuously adjustable
separately
At mid tilt 16.9 17.2 17.3 17.7 16.1 16.9 17.1 17.4
Gain (dBi)
Over all tilts 16.8±0.5 17.1±0.5 17.2±0.5 17.6±0.5 16.0±0.6 16.8±0.5 17.0±0.5 17.3±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 69±6 66±6 58±6 69±7 67±6 62±6 60±6
Vertical 3 dB beam width (°) 7.1±0.6 6.3±0.6 5.6±0.3 5.1±0.3 7.0±0.6 6.2±0.5 5.5±0.3 5.1±0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 24 > 24 > 25 > 25 > 24
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 17 > 17 > 17 > 18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

301
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1695–1880) 2 x (2300–2690) (CBy3) 2 x (1427–1880) (Tb2) 2 x (2300–2690) (LTy2)
Frequency range (MHz)
(Bb1) 2300–2490 2490–2690 1427–1518 1695–1880 2300–2490 2490–2690
Polarization +45°, –45°
2–12, continuously 2–12, continuously 2–12, continuously 2–12, continuously
Electrical downtilt (°)
adjustable adjustable adjustable adjustable
At mid tilt 16.1 17.0 17.4 15.5 16.2 16.5 17.2
Gain (dBi)
Over all tilts 16.0±0.6 16.9±0.5 17.3±0.5 15.4±0.6 16.1±0.5 16.4±0.5 17.0±0.5
Side lobe suppression for first
> 15 > 16 > 16 > 15 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±7 61±6 60±6 70±7 69±6 65±6 58±6
Vertical 3 dB beam width (°) 7.6±0.7 5.7±0.3 5.2±0.3 9.3±0.5 7.8±0.5 5.9±0.3 5.3±0.3
VSWR < 1.5 < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27 ≥ 27 ≥ 27
Front to back ratio, ±30° (dB) > 23 > 25 > 24 > 23 > 25 > 24 > 24
Cross polar ratio, 0° (dB) > 16 > 16 > 17 > 18 > 18 > 18 > 17
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1600 W (at 50℃ ambient temperature)

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2769 x 469 x 206 (809)
Packing dimensions (H x W x D) (mm) 2980 x 555 x 255
Antenna weight (kg) 62.5
Antenna packing weight (kg) 81.3 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
2769

Connector 10 x 4.3-10 Female +5 x MQ4 Male


1885

Connector position Bottom


Frontal: 787 (at 150 km/h)
Wind load (N) Lateral: 604 (at 150 km/h)
Maximum: 1031 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene


75

Unit: mm

302
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

303
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Pattern Sample for Reference

690–862 MHz 880–960 MHz 690–960 MHz


(Lr1) (Lr2) (Rr3)

1695–2690 MHz 1695–1880 MHz 2300–2690 MHz


(LBy1/RBy4) (Bb1) (CBy3)

1695–2690 MHz 1427–1880 MHz 2300–2690 MHz


(Tb2) (LTy2)
(RTy5)

304
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Port and Array Layout

1–2 3–4 5–6


r2
y2 y2
9–10 13–14 y5 y5

b2 b2
7 8
y3 y3
12

11 15 y1 b1 b1 y4
r1 r3

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–862 HWxxxx……....Lr1

3–4 Lr2 880–960 HWxxxx….......Lr2

5–6 Rr3 690–960 HWxxxx……...Rr3

7 Bb1 1695–1880 HWxxxx……..Bb1

8 Tb2 1427–1880 HWxxxx……...Tb2

9–10 LBy1 1695–2690 HWxxxx…….LBy1

11 LTy2 2300–2690 HWxxxx…….LTy2

12 CBy3 2300–2690 HWxxxx……CBy3

13–14 RBy4 1695–2690 HWxxxx……RBy4

15 RTy5 1695–2690 HWxxxx……RTy5

305
Product Product
List Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/
1427-1880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/
2x(17.5i/16.5i/17.5i/16i/17i/17.5i)-15xM-R
EasyRET 30-Port 3L12H Antenna with 10 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

306
Product Product
List Category
B. Passive Antenna
Multi-band
B - 6 4L8H

24 Ports - 4L8H

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

2x 690-862/ 2x 15.5/ 2-12/


2x 880-960/ 2x 16/ 2-12/
2x 1427-2690/ 2x 18/ 2-12/
2x 1695-2690/
5 x 65
2x 18/ 2-12/
24 x 4.3-10 2695 x 469 x 206 A124518R3v06 MUC 308
2x 1427-2690/ 2x 17.5/ 2-12/
2x 1695-2690 2x 17.5/ 2-12

307
Product
Category
A124518R3v06
D12X-2x690-862/2x880-960/2x1427-2690/2x1695-2690/2x1427-2690/
2x1695-2690-12x65/2x15.5i/2x16i/2x18i/2x18i/2x17.5i/2x17.5i-12xM-R
EasyRET 24-Port 4L8H Antenna with 12 Integrated RCUs – 2.6 m

Antenna Specifications

Electrical Properties
2 x (690–862) (Lr1/Rr3) 2 x (880–960) 2 x (1695–2690) (LBy1/RBy7)
Frequency range (MHz)
690–803 790–862 (Lr2/Rr4) 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 15.6 15.8 16.2 16.8 17.3 17.6 18.1
Gain (dBi)
Over all tilts 15.5±0.5 15.7±0.6 16.0±0.6 16.7±0.6 17.2±0.6 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 68±6 65±6 70±7 67±6 60±6 58±6
Vertical 3 dB beam width (°) 8.5±0.6 7.7±0.5 6.8±0.5 7.8±0.8 7.0±0.5 6.2±0.6 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 22 > 23 > 22 > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 16 > 17 > 18 > 17
Efficiency (dB) –1.75 –0.65±0.15 –0.75±0.15 –0.85±0.20 –0.90±0.20
Efficiency average (%) 67 86 84 82 81
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1695–2690) (LTy2/RTy8)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.5 17.0 17.4 17.9
Gain (dBi)
Over all tilts 16.4±0.6 16.9±0.6 17.3±0.5 17.8±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 67±6 60±6 58±6
Vertical 3 dB beam width (°) 7.8±0.8 7.0±0.5 6.2±0.6 5.5±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 27
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 16 > 17 > 18 > 17
Efficiency (dB) –0.85±0.20 –0.95±0.20 –1.05±0.25 –1.10±0.25
Efficiency average (%) 82 80 79 78
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

308
Product Product
List Category
A124518R3v06
D12X-2x690-862/2x880-960/2x1427-2690/2x1695-2690/2x1427-2690/
2x1695-2690-12x65/2x15.5i/2x16i/2x18i/2x18i/2x17.5i/2x17.5i-12xM-R
EasyRET 24-Port 4L8H Antenna with 12 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1427–2690) (CLBy3/CRBy5/)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.6 17.1 17.7 18.1 18.5
Gain (dBi)
Over all tilts 15.5±0.7 17.0±0.7 17.6±0.5 18.0±0.5 18.4±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 65±6 60±6 58±7
Vertical 3 dB beam width (°) 9.5±0.7 7.8±0.7 7.2±0.6 6.4±0.5 5.6±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) >25 >26 >26 >26 >26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.60±0.15 –0.65±0.15 –0.75±0.15 –0.85±0.20 –0.90±0.20
Efficiency average (%) 87 86 84 82 81
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLTy4/CRTy6)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.2
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.7±0.5 18.1±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 65±6 60±6 58±7
Vertical 3 dB beam width (°) 9.5±0.7 7.8±0.7 7.2±0.6 6.4±0.5 5.6±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) >25 >26 >26 >26 >26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.80±0.15 –0.85±0.15 –0.95±0.20 –1.05±0.25 –1.10±0.25
Efficiency average (%) 83 82 80 79 78
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

309
Product Product
List Category
A124518R3v06
D12X-2x690-862/2x880-960/2x1427-2690/2x1695-2690/2x1427-2690/
2x1695-2690-12x65/2x15.5i/2x16i/2x18i/2x18i/2x17.5i/2x17.5i-12xM-R
EasyRET 24-Port 4L8H Antenna with 12 Integrated RCUs – 2.6 m

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 2695 x 469 x 206


Packing dimensions (H x W x D) (mm) 2980 x 555 x 255

(695)
Antenna weight (kg) 56.0
Antenna packing weight (kg) 73.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
Connector 24 x 4.3-10 Female
Connector position Bottom

2695
1925
Frontal: 766 (at 150 km/h)
Wind load (N) Lateral: 588 (at 150 km/h)
Maximum: 1003 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene

75
Unit: mm

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

310
Product Product
List Category
A124518R3v06
D12X-2x690-862/2x880-960/2x1427-2690/2x1695-2690/2x1427-2690/
2x1695-2690-12x65/2x15.5i/2x16i/2x18i/2x18i/2x17.5i/2x17.5i-12xM-R
EasyRET 24-Port 4L8H Antenna with 12 Integrated RCUs – 2.6 m

Port and Array Layout

11–12 15–16 19–20 23–24

9–10 21–22
13–14 17–18

3–4 7–8

1–2 5–6

r2 r4

y2 y4 y6 y8

y1 y3 y5 y7

r1 r3

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–862 HWxxxx……….....Lr1
3–4 Lr2 880–960 HWxxxx……..…..Lr2
5–6 Rr3 690–862 HWxxxx………....Rr3
7–8 Rr4 880–960 HWxxxx………....Rr4
9–10 LBy1 1695–2690 HWxxxx………..LBy1
11–12 LTy2 1695–2690 HWxxxx………..LTy2
13–14 CLBy3 1427–2690 HWxxxx……..CLBy3
15–16 CLTy4 1427–2690 HWxxxx……..CLTy4
17-18 CRBy5 1427–2690 HWxxxx……..CRBy5
19-20 CRTy6 1427–2690 HWxxxx……..CRTy6
21-22 RBy7 1695–2690 HWxxxx……….RBy7
23-24 RTy8 1695–2690 HWxxxx……….RTy8

311
Product Product
List Category
A124518R3v06
D12X-2x690-862/2x880-960/2x1427-2690/2x1695-2690/2x1427-2690/
2x1695-2690-12x65/2x15.5i/2x16i/2x18i/2x18i/2x17.5i/2x17.5i-12xM-R
EasyRET 24-Port 4L8H Antenna with 12 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
4 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern sample for reference

690–862 MHz 880–960 MHz


(Lr1/Rr3) (Lr2/Rr4)

1695–2690 MHz 1427–2690 MHz


(LBy1/LTy2/RBy7/RTy8) (CLBy3/CLTy4/CRBy5/CRTy6)

312
Product Product
List Category
B. Passive Antenna
Multi-beam
1. Dual-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-960/ 33(-30)/
690-960 33(+30)
18.5/18.5 0-10/0-10 4 x 4.3-10 2090 x 590 x 169 AMB4519R0v06 / 315

1695-2690/ 33(-30)/
1695-2690 33(+30)
20/20 2-12/2-12 4 x 4.3-10 1509 x 399 x 196 AMB4520R8v06 / 318

2. Hybrid Multi-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-960/ 17/
1695-2690/ 65/65/65/ 17.5/ 0-10/2-12/
1695-2690/ 33(-30)/ 17.5/ 2-12/0-10/ 10 x 4.3-10 2685 x 359 x 178 AMB4519R2v06 / 321
1695-2200/ 33(+30) 18.5/ 0-10
1695-2200 18.5

3. Dual-band Dual-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

790-960/ 33(-30)/ 16/


790-960/ 33(+30)/ 16/ 2-12/2-12/
1710-2200/ 33(-30)/ 18.5/ 2-12/2-12
8 x 4.3-10 2090 x 590 x 169 AMB4519R3v06 / 325
1710-2200 33(+30) 18.5

4. 4T4R Dual-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

1695-2690/ 33(-30)/ 19/


1695-2690/ 33(+30)/ 19/ 2-12/2-12/
1695-2690/ 33(-30)/ 19/ 2-12/2-12
8 x 4.3-10 2099 x 399 x 196 AMB4519R6v06 / 329
1695-2690 33(+30) 19
1695-2690/ 33(-30)/ 19.5/
1695-2690/ 33(+30)/ 19.5/ 2-12/2-12/
1695-2690/ 33(-30)/ 19.5/ 2-12/2-12
8 x 4.3-10 2550 x 399 x 196 AMB4520R9v06 / 332
1695-2690 33(+30) 19.5

313
Product
Category
Multi-beam
5. Triple-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

1710-2200/ 22(-30)/ 21/


2-12/2-12/
1710-2200/ 22(0)/ 21/
2-12
6 x 4.3-10 1499 x 449 x 115 AMB4521R0v06 / 336
1710-2200 22(+30) 21

6. Hybrid 4T4R Dual-beam Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width(o) Downtilt(o)

690-960/ 65/ 17/


1695-2200/ 33(-30)/ 19/ 0-10/2-12/
1695-2200/ 33(+30)/ 19/ 2-12/2-12/ 10 x 4.3-10 2685 x 359 x 178 AMB4519R5v06 / 339
1695-2200/ 33(-30)/ 19/ 2-12
1695-2200 33(+30)/ 19
690-960/ 15.5/
65/65/
690-960/ 15.5/
33(-30)/ 2-12/2-12/
1695-2690/ 18.5/
1695-2690/
33(+30)/
18.5/
2-12/2-12/ 12 x 4.3-10 2009 x 499 x 206 AMB4519R13v06 / 343
33(-30)/ 2-12/2-12
1695-2690/ 18.5/
33(+30)/
1695-2690 18.5
690-960/ 16.5/
65/65/
690-960/ 16.5/
33(-30)/ 2-12/2-12/
1695-2690/ 19/
1695-2690/
33(+30)/
19/
2-12/2-12/ 12 x 4.3-10 2550 x 499 x 206 AMB4519R9v06 / 347
33(-30)/ 2-12/2-12
1695-2690/ 19/
33(+30)/
1695-2690 19
690-960/ 15.5/
690-960/ 15.5/
65/65/65/65/
1427-2690/ 17.5/ 2-12/2-12/
33(-30)/
1427-2690/ 17.5/ 2-12/2-12/
1695-2690/
33(+30)/
19/ 2-12/2-12/
16 x 4.3-10 2009 x 499 x 206 *AMB4519R40v06 / 350
33(-30)/
1695-2690/ 19/ 2-12/2-12
33(+30)/
1695-2690/ 19/
1695-2690 19
690-960/ 16.5/
690-960/ 16.5/
65/65/65/65/
1427-2690/ 17.5/ 2-12/2-12/
33(-30)/
1427-2690/ 17.5/ 2-12/2-12/
1695-2690/
33(+30)/
19/ 2-12/2-12/
16 x 4.3-10 2550 x 499 x 206 AMB4519R29v06 / 352
33(-30)/
1695-2690/ 19/ 2-12/2-12
33(+30)/
1695-2690/ 19/
1695-2690 19

** Preliminary Issue

314
Product
Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
690–960 (r/rr)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable
At mid tilt 16.6 18.0 18.2 18.3
Gain (dBi)
Over all tilts 16.5±0.5 17.8±0.4 18.0±0.3 18.2±0.3
Side lobe suppression for first side
> 16 > 17 > 18 > 18
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 39±3 37±3 36±2 34±2
Vertical 3 dB beam width (°) 10.0±0.5 9.2±0.3 8.9±0.3 8.3±0.3
VSWR < 1.5
Horizontal beam centers (°) ±30 ±28 ±27 ±25
Cross polar isolation (dB) Same beam: ≥ 22 Same beam: ≥ 26
Beam to beam isolation (dB) ≥18 (758–788MHz & 791–821MHz & 869–894MHz ≥ 25; 925–960MHz ≥ 21)
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26
Cross polar ratio at boresight (dB) > 17 > 22 > 23 > 23
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2090 x 590 x 169
Packing dimensions (H x W x D) (mm) 2350 x 705 x 275
(726)
Antenna weight (kg) 36.1
Antenna packing weight (kg) 49.6 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
2090
1267

Connector 4 x 4.3-10 Female


Connector position Bottom
Frontal: 1317 (at 150 km/h)
Wind load (N) Lateral: 389 (at 150 km/h)
Maximum: 1317 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
97

Unit: mm

315
Product Product
List Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

rr
1–2 3–4

Port Array Freq(MHz) RET S/N


1–2 r 690–960 HWxxxx…….r

3–4 rr 690–960 HWxxxx……rr

316
Product Product
List Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 690–960 MHz


(rr–30) (r+30)

317
Product Product
List Category
AMB4520R8v06
2MX-1695-2690-33-20i-M-R
EasyRET Dual-Beam Antenna with 2 Integrated RCUs – 1.5 m

Antenna Specifications

Electrical Properties
1695–2690 (y1/y2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 19.1 19.6 20.0 20.3
Gain (dBi)
Over all tilts 18.9±0.6 19.4±0.4 19.8±0.5 20.1±0.6
Side lobe suppression for first side lobe
> 16 > 16 > 16 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 37±4 36±3 34±3 32±3
Vertical 3 dB beam width (°) 7.1±0.5 6.3±0.6 5.6±0.4 5.1±0.3
VSWR < 1.5
Horizontal beam centers (°) ±31 ±31 ±31 ±32
Cross polar isolation (dB) ≥ 28
Port to port isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 28 > 28 > 28 > 29
Cross polar ratio at boresight (dB) > 15 > 16 > 15 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

(135)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1509 x 399 x 196
Packing dimensions (H x W x D) (mm) 1785 x 480 x 250
Antenna weight (kg) 20.0
Antenna packing weight (kg) 31.0 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1509
1310

Operational temperature (℃) –40 to +65


Connector 4 x 4.3-10 Female
Connector position Bottom
Frontal: 400 (at 150 km/h)
Wind load (N) Lateral: 280 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
64

Unit: mm

318
Product Product
List Category
AMB4520R8v06
2MX-1695-2690-33-20i-M-R
EasyRET Dual-Beam Antenna with 2 Integrated RCUs – 1.5 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

Port and Array Layout

y1 y2
1–2 3–4

Port Array Freq(MHz) RET S/N


1–2 y1 1695–2690 HWxxxx……y1

3–4 y2 1695–2690 HWxxxx……y2

319
Product Product
List Category
AMB4520R8v06
2MX-1695-2690-33-20i-M-R
EasyRET Dual-Beam Antenna with 2 Integrated RCUs – 1.5 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

1695–2690 MHz 1695–2690 MHz


(y2) (y1)

320
Product Product
List Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam
Antenna with 5 Integrated RCUs – 2.6 m
Antenna Specifications

Electrical Properties
690–960 (r1) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°) 0–10, continuously adjustable
separately
At mid tilt 15.9 16.0 16.1 16.4 16.9 17.1 17.2 17.3
Gain (dBi)
Over all tilts 15.7±0.4 15.8±0.5 15.9±0.4 16.2±0.5 16.8±0.6 17.0±0.5 17.0±0.5 17.2±0.5
Side lobe suppression for first side
> 18 > 19 > 18 > 18 > 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±4 67±4 67±3 66±4 60±5 61±5 63±5 58±5
Vertical 3 dB beam width (°) 9.5±0.6 8.8±0.6 8.4±0.6 7.8±0.4 6.5±0.6 5.8±0.4 5.0±0.5 4.8±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26 > 26 > 27 > 27 > 28
Cross polar ratio, 0° (dB) > 15 > 17 > 17 > 17 > 17 > 20 > 20 > 20
Max. effective power per port (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
1695–2200 (b1/b2)
Frequency range (MHz)
1695–1990 1920–2200
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable
At mid tilt 17.3 18.1
Gain (dBi)
Over all tilts 17.1±0.6 17.9±0.6
Side lobe suppression for first side
> 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 33±3 30±3
Vertical 3 dB beam width (°) 7.2±0.5 6.5±0.5
VSWR < 1.5
Horizontal beam centers (°) ±29 ±27
Cross polar isolation (dB) Same beam: ≥ 25
Beam to beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 27 > 29
Cross polar ratio at boresight (dB) > 15 > 17
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

321
Product Product
List Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam
Antenna with 5 Integrated RCUs – 2.6 m

Mechanical Properties 68

Antenna dimensions (H x W x D) (mm) 2685 x 359 x 178

(796)
Packing dimensions (H x W x D) (mm) 2945 x 445 x 225
Antenna weight (kg) 34.0
Antenna packing weight (kg) 49.0 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
Connector 10 x 4.3-10 Female

2685
1837
Connector position Bottom
Frontal: 868 (at 150 km/h)
Wind load (N) Lateral: 492 (at 150 km/h)
Maximum: 1026 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

52
Unit: mm
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00030 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

322
Product Product
List Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam
Antenna with 5 Integrated RCUs – 2.6 m

Port and Array Layout

1–2 9–10
7–8

b1 b2

y1 r1 y2

3–4 5–6

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx…….…r1

3–4 b1 1695–2200 HWxxxx…….…b1

5–6 b2 1695–2200 HWxxxx…….…b2

7–8 Ly1 1695–2690 HWxxxx……..Ly1

9–10 Ry2 1695–2690 HWxxxx…….Ry2

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


(r1) (Ly1/Ry2)

1695–2200 MHz 1695–2200 MHz


(b2) (b1)

323
Product Product
List Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam
Antenna with 5 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

324
Product Product
List Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid
Quad-beam Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
790–960 (r1/r2) 1710–2200 (b1/b2)
Frequency range (MHz)
790–862 824–894 880–960 1710–1990 1920–2200
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.8 15.2 15.7 18.2 19.2
Gain (dBi)
Over all tilts 14.7±0.8 15.1±0.8 15.5±0.8 18.0±0.8 19.0±0.6
Side lobe suppression for first side lobe
> 16 > 17 > 17 > 17 > 18
above main beam (dB)
Horizontal 3 dB beam width (°) 38±3 37±3 35±3 30±3 29±1.5
Vertical 3 dB beam width (°) 16.0±2.4 15.5±2.6 14.2±2.5 7.2±0.5 6.5±0.5
VSWR < 1.5
Horizontal beam centers (°) ±27 ±26 ±24 ±30 ±29
Cross polar isolation (dB) Same beam: ≥ 25 Same beam: ≥ 25
Beam to beam isolation(dB) ≥ 18 ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 30
Cross polar ratio at boresight (dB) > 18 > 17 > 18
Max. effective power per port (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2090 x 590 x 169
(725)
Packing dimensions (H x W x D) (mm) 2350 x 705 x 275
Antenna weight (kg) 38.5
Antenna packing weight (kg) 55.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
2090
1267

Connector 8 x 4.3-10 Female


Connector position Bottom
Frontal: 1317 (at 150 km/h)
Wind load (N) Lateral: 389 (at 150 km/h)
Maximum: 1317 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
98

Unit: mm

325
Product Product
List Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid
Quad-beam Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 5–6 7–8 3–4


r1 r2

b1 b2

Port Array Freq(MHz) RET S/N


1–2 r1 790–960 HWxxxx……r1

3–4 r2 790–960 HWxxxx……r2

5–6 b1 1710–2200 HWxxxx……b1

7–8 b2 1710–2200 HWxxxx……b2

326
Product Product
List Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid
Quad-beam Antenna with 4 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

327
Product Product
List Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid
Quad-beam Antenna with 4 Integrated RCUs – 2.0 m

Pattern Sample for Reference

790–960 MHz 790–960 MHz


(r2-30) (r1+30)

1710–2200 MHz 1710–2200 MHz


(b2-30) (b1+30)

328
Product Product
List Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
2 x (1695–2690) (By1/Ty2/By3/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.0 18.4 18.9 19.4
Top
Over all tilts 17.8±0.6 18.2±0.4 18.7±0.7 19.2±0.6
Gain (dBi)
At mid tilt 18.0 18.6 19.2 19.7
Bottom
Over all tilts 17.8±0.6 18.4±0.5 19.0±0.6 19.5±0.5
Side lobe suppression for first side lobe
> 16 > 16 > 15 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 37±4 36±3 34±3 32±3
Vertical 3 dB beam width (°) 8.9±0.8 8.0±0.6 7.1±0.5 6.4±0.3
VSWR < 1.5
Horizontal beam centers (°) ±31 ±31 ±31 ±32
Cross polar isolation (dB) ≥ 28
Port to port isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 28 > 28 > 28 > 29
Cross polar ratio at boresight (dB) > 15 > 16 > 15 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 900 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 399 x 196 (652)
Packing dimensions (H x W x D) (mm) 2285 x 465 x 250
Antenna weight (kg) 28.5
Antenna packing weight (kg) 40.9 (Including clamps)
Radome material Fiberglass
2099

Radome colour Light grey


Operational temperature (℃) –40 to +65
1383

Frontal: 556 (at 150 km/h)


Wind load (N) Lateral: 389 (at 150 km/h)
Maximum: 709 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 8 x 4.3-10 Female
64

Connector position Bottom


Unit: mm

329
Product Product
List Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.0 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

330
Product Product
List Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.0 m

Port and Array Layout

1–2 5–6

y2 y4

3–4 7–8
y1 y3

Port Array Freq(MHz) RET S/N


1–2 By1 1695–2690 HWxxxx……By1

3–4 Ty2 1695–2690 HWxxxx……Ty2

5–6 By3 1695–2690 HWxxxx……By3

7–8 Ty4 1695–2690 HWxxxx……Ty4

Pattern Sample for Reference

1695–2690 MHz 1695–2690 MHz


(By3) (Ty2)

1695–2690 MHz 1695–2690 MHz


(Ty4) (By1)

331
Product Product
List Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.6 m

Antenna Specifications

Electrical Properties
2 x (1695–2690) (By1/By3/Ty2/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.5 19.0 19.4 19.9
Top
Over all tilts 18.3±0.7 18.8±0.7 19.2±0.7 19.7±0.7
Gain (dBi)
At mid tilt 18.8 19.3 19.7 20.2
Bottom
Over all tilts 18.6±0.7 19.1±0.7 19.5±0.7 20.0±0.7
Side lobe suppression for first side lobe
> 16 > 16 > 15 > 16
above main beam (dB)
Horizontal 3 dB beam width (°) 37±4 36±3 34±3 32±3
Vertical 3 dB beam width (°) 7.3±0.7 6.5±0.5 5.8±0.4 5.2±0.3
VSWR < 1.5
Horizontal beam centers (°) ±32 ±32 ±32 ±32
Cross polar isolation (dB) ≥ 28
Port to port isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 28 > 28 > 28 > 29
Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 399 x 196
(601)

Packing dimensions (H x W x D) (mm) 2820 x 470 x 240


Antenna weight (kg) 32.4
Antenna packing weight (kg) 45.9 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
2550
1885

Connector 8 x 4.3-10 Female


Connector position Bottom
Frontal: 676 (at 150 km/h)
Wind load (N) Lateral: 473(at 150 km/h)
Maximum: 862 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
64

Unit: mm

332
Product Product
List Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–2 5–6

y2 y4

3–4 7–8
y1 y3

Port Array Freq(MHz) RET S/N


1–2 By1 1695–2690 HWxxxx……By1

3–4 Ty2 1695–2690 HWxxxx……Ty2

5–6 By3 1695–2690 HWxxxx……By3

7–8 Ty4 1695–2690 HWxxxx……Ty4

333
Product Product
List Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

334
Product Product
List Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET
Dual-band Dual-Beam Antenna with 4 Integrated RCUs – 2.6 m

Pattern Sample for Reference

1695–2690 MHz 1695–2690 MHz


(Ty4) (Ty2)

1695–2690 MHz 1695–2690 MHz


(By3) (By1)

335
Product Product
List Category
AMB4521R0v06
3MX-1710-2200-22-21i-M-R EasyRET Single-Band
Tri-Beam Antenna with 3 Integrated RCUs – 1.4 m

Antenna Specifications
Electrical Properties
1710–2200 (b1/b2/b3)
Frequency range (MHz)
1710–1990 1920–2200
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt (M beam) 20.3 20.8
Over all tilts (M beam) 20.1±0.6 20.6±0.5
Gain (dBi)
At mid tilt (L and R beam) 18.7 19.5
Over all tilts (L and R beam) 18.5±0.6 19.3±0.5
Side lobe suppression for first side lobe above
> 17 > 17
main beam (dB)
Horizontal 3 dB beam width (°) (M beam) 23±2 21±1.4
Horizontal 3 dB beam width (°) (L and R beam) 28±2 24±1.4
Vertical 3 dB beam width (°) 7.5±0.5 7.0±0.5
VSWR < 1.5
Cross polar isolation (dB) Same beam: ≥ 25
Beam to beam isolation (dB) ≥ 18
Front to back ratio, ±30° (dB) > 29 > 30
Cross polar ratio at boresight (dB) > 17 > 17
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

68

(57)
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115
Packing dimensions (H x W x D) (mm) 1835 x 510 x 185
Antenna weight (kg) 22.6
Antenna packing weight (kg) 34.6 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1385
1499

Operational temperature (℃) –40 to +65


Frontal: 721(at 150 km/h)
Wind load (N) Lateral: 106 (at 150 km/h)
Maximum: 721 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom
57

Unit: mm

336
Product Product
List Category
AMB4521R0v06
3MX-1710-2200-22-21i-M-R EasyRET Single-Band
Tri-Beam Antenna with 3 Integrated RCUs – 1.4 m

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16 ° 2.1 kg 1 (Separate packing)

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

337
Product Product
List Category
AMB4521R0v06
3MX-1710-2200-22-21i-M-R EasyRET Single-Band
Tri-Beam Antenna with 3 Integrated RCUs – 1.4 m

Port and Array Layout

3–4

b1 b3

1–2 5–6

b2

Port Array Freq(MHz) RET S/N


1–2 b1 1710–2200 HWxxxx..….b1

3–4 b2 1710–2200 HWxxxx..….b2

5–6 b3 1710–2200 HWxxxx..….b3

Pattern Sample for Reference

1710–2200 MHz 1710–2200 MHz 1710–2200 MHz


(b3-30) (b2) (b1+30)

338
Product Product
List Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/
33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid
Penta-beam Antenna with 5 Integrated RCUs – 2.6 m

Antenna Specifications

Electrical Properties
690–960 (r1)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable
At mid tilt 15.8 16.2 16.4 16.6
Gain (dBi)
Over all tilts 15.7±0.5 16.0±0.5 16.3±0.5 16.5±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 65±4.0 63±4.0 62±3.0 60±3.0
Vertical 3 dB beam width (°) 8.5±0.7 7.8±0.5 7.5±0.5 7.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 30 (690–960 MHz and 1695–2690 MHz)
Front to back ratio, ±30° (dB) > 23 > 23 > 23 > 23
Cross polar ratio, 0° (dB) > 17 > 17 > 17 > 17
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2200) (Bb1/Bb3/Tb2/Tb4)
Frequency range (MHz)
1695–1880 1850–1990 1920–2200
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 17.6 18.0 18.5
Bottom
Over all tilts 17.4±0.6 17.9±0.6 18.3±0.6
Gain (dBi)
At mid tilt 17.2 17.6 18.0
Top
Over all tilts 17.0±0.6 17.4±0.5 17.8±0.5
Side lobe suppression for first side
> 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 34±3.0 32±3.0 30±3.0
Vertical 3 dB beam Bottom 7.6±0.7 7.1±0.7 6.6±0.7
width (°) Top 7.6±0.7 7.1±0.7 6.6±0.7
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Beam to beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 30 (690–960 MHz and 1695–2690 MHz)
Front to back ratio, ±30° (dB) > 26
Cross polar ratio at boresight (dB) > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

339
Product Product
List Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/
33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid
Penta-beam Antenna with 5 Integrated RCUs – 2.6 m

Mechanical Properties 68

Antenna dimensions (H x W x D) (mm) 2685 x 359 x 178


Packing dimensions (H x W x D) (mm) 2985 x 425 x 255

(796)
Antenna weight (kg) 34.5
Antenna packing weight (kg) 54.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

2685
Operational temperature (℃) –40 to +65
Connector 10 x 4.3-10 Female

1837
Connector position Bottom
Frontal: 868 (at 150 km/h)
Wind load (N) Lateral: 492 (at 150 km/h)
Maximum: 1026 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

52
Unit: mm
Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

340
Product Product
List Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/
33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid
Penta-beam Antenna with 5 Integrated RCUs – 2.6 m

Port and Array Layout

3–4 1–2 7–8

b2 b4

b1 b3
5–6 9–10
r1

Port Array Freq(MHz) RET S/N


1–2 r1 690–960 HWxxxx…..….r1

3–4 Bb1 1695–2200 HWxxxx……Bb1

5–6 Tb2 1695–2200 HWxxxx……Tb2

7–8 Bb3 1695–2200 HWxxxx……Bb3

9–10 Tb4 1695–2200 HWxxxx……Tb4

Pattern Sample for Reference

690–960 MHz 1695–2200 MHz 1695–2200 MHz


(r1) (Tb4) (Tb2)

1695–2200 MHz 1695–2200 MHz


(Bb3) (Bb1)

341
Product Product
List Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/
33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid
Penta-beam Antenna with 5 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

342
Product Product
List Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
15.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 14.9 15.0 15.1 15.3
Gain (dBi)
Over all tilts 14.7±0.5 14.8±0.4 14.9±0.4 15.0±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±6 67±6 68±5 69±5
Vertical 3 dB beam width (°) 11.0±0.9 9.9±0.7 9.7±0.6 9.3±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Port to port isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 22 > 22 > 23 > 23
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (By1/Ty2/By3/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 17.3 18.0 18.0 17.8
Top
Over all tilts 17.1±0.8 17.8±0.5 17.8±0.7 17.6±0.8
Gain (dBi)
At mid tilt 17.6 18.3 18.3 18.1
Bottom
Over all tilts 17.4±0.8 18.1±0.5 18.1±0.5 17.9±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±4 33±3 33±3 31±3
Vertical 3 dB beam width (°) 9.8±0.9 8.8±0.7 7.8±0.6 7.1±0.5
VSWR < 1.5
Horizontal beam centers (°) ±28 ±29 ±29 ±29
Cross polar isolation (dB) ≥ 25
Port to port isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 24 > 26 > 26 > 26
Cross polar ratio at boresight (dB) > 15 > 18 > 18 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

343
Product Product
List Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
15.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.0 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206

(530)
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 40.5
Antenna packing weight (kg) 55.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

2009
Operational temperature (℃) –40 to +65
Connector 12 x 4.3-10 Female

1420
Connector position Bottom
Frontal: 717 (at 150 km/h)
Wind load (N) Lateral: 412 (at 150 km/h)
Maximum: 945 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

59
Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

344
Product Product
List Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
15.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.0 m

Port and Array Layout

1–2 3–4
5–6 9–10
y2 y4

y1 y3
7–8 11–12

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx…..…Lr1

3–4 Rr2 690–960 HWxxxx……...Rr2

5–6 By1 1695–2690 HWxxxx……...By1

7–8 Ty2 1695–2690 HWxxxx………Ty2

9–10 By3 1695–2690 HWxxxx……….By3

11–12 Ty4 1695–2690 HWxxxx……….Ty4

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (By1) (Ty4)

1695–2690 MHz 1695–2690 MHz


(By3) (Ty2)

345
Product Product
List Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
15.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

346
Product Product
List Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
16.5i/16.5i/19i/19i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.6 m
Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 15.9 16.0 16.1
Gain (dBi)
Over all tilts 15.5±0.5 15.7±0.5 15.8±0.5 15.9±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±5 68±5 68±6 69±6
Vertical 3 dB beam width (°) 8.7±0.6 8.0±0.4 7.7±0.4 7.3±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 22 > 22 > 22 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤–153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (By1/Ty2/By3/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.3 18.9 18.8 18.7
Top
Over all tilts 18.1±0.8 18.7±0.5 18.6±0.8 18.5±0.8
Gain (dBi)
At mid tilt 18.6 19.2 19.1 19.0
Bottom
Over all tilts 18.4±0.8 19.0±0.5 18.9±0.8 18.8±0.8
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±4 33±3 34±3 31±3
Vertical 3 dB beam width (°) 7.1±0.6 6.4±0.5 5.6±0.3 5.4±0.4
Horizontal beam centers (°) ±28 ±30 ±30 ±29
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Beam to beam isolation(dB) ≥ 25
Front to back ratio, ±30° (dB) > 24 > 27 > 27 > 26
Cross polar ratio at boresight (dB) > 15 > 16 > 16 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

*Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

347
Product Product
List Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
16.5i/16.5i/19i/19i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.6 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 499 x 206
Packing dimensions (H x W x D) (mm) 2810 x 560 x 250

(621)
Antenna weight (kg) 49.0
Antenna packing weight (kg) 66.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65

2550
Connector 12 x 4.3-10 Female

1870
Connector position Bottom
Frontal: 910 (at 150 km/h)
Wind load (N) Lateral: 523 (at 150 km/h)
Maximum: 1200 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

59
Windload Polar Chart Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

348
Product Product
List Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/33-
16.5i/16.5i/19i/19i-M/M/M/M-R EasyRET
Hybrid Hexa-beam Antenna with 6 Integrated RCUs – 2.6 m
Port and Array Layout

1–2 3–4
5–6 9–10
y2 y4

y1 y3

7–8 11–12
r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……..Lr1

3–4 Rr2 690–960 HWxxxx……..Rr2

5–6 By1 1695–2690 HWxxxx…….By1

7–8 Ty2 1695–2690 HWxxxx…….Ty2

9–10 By3 1695–2690 HWxxxx…….By3

11–12 Ty4 1695–2690 HWxxxx…….Ty4

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (By3) (By1)

1695–2690 MHz 1695–2690 MHz


(Ty2) (Ty4)

349
Product Product
List Category
AMB4519R40v06
2M06X-2x690-960-2x1427-2690-2x1695-2690-4x65/2x33-
2x15.5i/2x17.5i/2x19i-6xM-R
EasyRET Hybrid Octa-beam Antenna with 6 Integrated RCUs – 2.0 m

Preliminary Issue

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (By5/Ty6)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
separately
At mid tilt 14.8 15.0 15.1 15.3 14.9 16.3 16.8 17.2 17.5
Gain (dBi)
Over all tilts 14.7±0.5 14.8±0.4 15.0±0.4 15.2±0.4 14.7±0.5 16.2±0.7 16.6±0.5 17.1±0.6 17.4±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 17 > 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 71±7 70±7 64±6 71±5 69±5 68±5 64±5 59±5
Vertical 3 dB beam width (°) 10.5±0.8 9.6±0.6 9.2±0.6 8.6±0.5 12.5±0.8 9.9±0.7 8.9±0.6 8.1±0.5 7.3±0.5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 21 > 22 > 23 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 20 > 20 > 20 > 20
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (By1/By3/Ty2/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.0 18.7 18.9 19.0
Gain (dBi)
Over all tilts 17.8±0.8 18.5±0.8 18.7±0.8 18.9±0.8
Side lobe suppression for first side
> 18 > 18 > 18 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±4 32±3 31±2 30±2
Vertical 3 dB beam width (°) 10.0±0.8 9.0±0.6 8.1±0.5 7.4±0.5
VSWR < 1.5
Horizontal beam centers (°) ±30 ±28 ±27 ±24
Cross polar isolation (dB) ≥ 25
Beam to Beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 26 > 28 > 28
Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 15
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)

350
Product Product
List Category
AMB4519R40v06
2M06X-2x690-960-2x1427-2690-2x1695-2690-4x65/2x33-
2x15.5i/2x17.5i/2x19i-6xM-R
EasyRET Hybrid Octa-beam Antenna with 6 Integrated RCUs – 2.0 m

Preliminary Issue

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206
Packing dimensions (H x W x D) (mm) 2360 x 560 x 260
Antenna weight (kg) 46.5
Antenna packing weight (kg) 63.8 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
Frontal: 765 (at 150 km/h)
Wind load (N) Lateral: 395 (at 150 km/h)
Maximum: 1000 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
Connector position Bottom

*GFRPP: Glass Fiber Reinforced Polypropylene

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

351
Product Product
List Category
AMB4519R29v06
2M06X-2x690-960/2x1427-2690/2x1695-2690-4x65/2x33-
2x16.5i/2x17.5i/2x19i-6xM-R EasyRET
Hybrid Octa-beam Antenna with 8 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 15.5 15.7 16.0 16.2


Gain (dBi)
Over all tilts 15.4±0.5 15.6±0.5 15.9±0.5 16.1±0.5
Side lobe suppression for first side
> 17 > 15 > 15 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 68±5 67±5 65±6
Vertical 3 dB beam width (°) 8.9±0.7 8.2±0.4 7.9±0.3 7.5±0.3

VSWR < 1.5

Cross polar isolation (dB) ≥ 25

Interband isolation (dB) ≥ 25

Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 23

Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18

Max. effective power per port (W) 400 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

Electrical Properties
2 x (1427–2690) (By5/Ty6)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 15.5 16.9 17.3 17.4 17.5


Gain (dBi)
Over all tilts 15.3±0.6 16.8±0.6 17.2±0.6 17.3±0.6 17.4±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 71±5 62±4 61±4 60±4 59±4
Vertical 3 dB beam width (°) 9.7±0.6 7.6±0.6 6.7±0.5 5.8±0.4 5.4±0.3

VSWR < 1.5 < 1.5


Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 28 ≥ 28

Front to back ratio, ±30° (dB) > 22 > 23 > 24 > 24 > 24

Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20 > 20

Max. effective power per port (W) 250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

352
Product Product
List Category
AMB4519R29v06
2M06X-2x690-960/2x1427-2690/2x1695-2690-4x65/2x33-
2x16.5i/2x17.5i/2x19i-6xM-R EasyRET
Hybrid Octa-beam Antenna with 8 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1695–2690) (By1/Ty2/By3/Ty4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.1 18.7 19.5 19.1
Gain (dBi)
Over all tilts 18.0±0.9 18.6±0.9 19.4±0.9 19.0±0.9
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 36±5 32±4 31±3 30±3
Vertical 3 dB beam width (°) 7.5±0.6 6.8±0.5 5.9±0.3 5.4±0.3
Horizontal beam centers (°) ±30 ±28 ±27 ±24
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Beam to Beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 28

Front to back ratio, ±30° (dB) > 25 > 26 > 28 > 28

Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 16

Max. effective power per port (W) 250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)


Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 499 x 206
(569)
Packing dimensions (H x W x D) (mm) 2810 x 555 x 250

Antenna weight (kg) 53.9


Antenna packing weight (kg) 73.1 (Including clamps)
Radome material Fiberglass
2550

Radome colour Light grey


Operational temperature (℃) –40 to +65
1912

Connector 16 x 4.3-10 Female


Connector position Bottom
Frontal: 910 (at 150 km/h)
Wind load (N) Lateral: 523 (at 150 km/h)
Maximum: 1200 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
69

Unit: mm

353
Product Product
List Category
AMB4519R29v06
2M06X-2x690-960/2x1427-2690/2x1695-2690-4x65/2x33-
2x16.5i/2x17.5i/2x19i-6xM-R EasyRET
Hybrid Octa-beam Antenna with 8 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Port and Array Layout

5–6 15–16 9–10


7–8 11–12

y6 y2 y4

13–14
1–2 y5 y1 y3
3–4

r1 r2

Port Array Freq(MHz) RET S/N


1–2 Lr1 690–960 HWxxxx……….Lr1

3–4 Rr2 690–960 HWxxxx……….Rr2

5–6 By1 1695–2690 HWxxxx……….By1

7–8 Ty2 1695–2690 HWxxxx……….Ty2

9–10 By3 1695–2690 HWxxxx……….By3

11–12 Ty4 1695–2690 HWxxxx……….Ty4

13–14 By5 1427–2690 HWxxxx……….By5

15–16 Ty6 1427–2690 HWxxxx……….Ty6

354
Product Product
List Category
AMB4519R29v06
2M06X-2x690-960/2x1427-2690/2x1695-2690-4x65/2x33-
2x16.5i/2x17.5i/2x19i-6xM-R EasyRET
Hybrid Octa-beam Antenna with 8 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz 1695–2690 MHz


(Lr1/Rr2) (By5/Ty6) (Ty4)

1695–2690 MHz 1695–2690 MHz 1695–2690 MHz


(Ty2) (By3) (By1)

355
Product Product
List Category
B. Passive Antenna
FDD 8T8R Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2x690-960 2x65 2x17 2 x 2-12


13 x 4.3-10
2x1427-2690 2x65 2x17.5 2 x 2-12 2009 x 399 x 206 A06240PD01v06 Hertz 357
Female
2x1695-2690 2x65 2x17.5 2 x 2-12

2x690-960 2x65 2x16.5 2 x 2-12


13 x 4.3-10
2x1427-2690 2x65 2x18 2 x 2-12
Female
2550 x 399 x 206 A06240PD02v06 Hertz 361
2x1695-2690 2x65 2x18 2 x 2-12

9 x 4.3-10
2x690-960 2x65 2x15.5 2x 2-12
Female +
2x1427-2690 2x65 2x18 2 x 2-12)
2 x MQ4
2009 x 499 x 206 A08260PD02v06 Hertz 366
4x1695-2690 (4x90|2x65) (4x16|2x18) (2 x 2-12 | 2-12)
Male
9 x 4.3-10
2x690-960 2x65/ 2x17 2x 2-12
Female +
2x1427-2690 2x65/ 2x18 2 x 2-12)
2 x MQ4
2550 x 499 x 206 *A08260PD07v06 Hertz 372
4x1695-2690 (4x90|2x65) (4x16|2x18) (2 x 2-12 | 2-12)
Male
9 x 4.3-10
2x690-960 2x65/ 2x16.5 2 x 2-12 Female
2x1427-2690 2x65/ 2x18 2 x 2-12 3 x MQ4
4x1695-2690 (4x90|2x65)/ (4x16|2x18) (2 x 2-12 | 2-12) Male +
2550 x 499 x 206 A12264PD02v06 Hertz 374
4x2300-3800 65 22 2-12 1 x MQ5
Male

2x1427-2690 2x65 2x19 2 x 2-12 9 x 4.3-10


2x1695-2690 2x65 2x19 2 x 2-12 Female
1599 x 399 x 206 *A04040PD03v06 Hertz 380

FDD SDA

Frequency 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Platform Page
Range (MHz) Beam Width (o) Downtilt (o)

2x690-960 2x65 2x15.5 2 x 2-12 2 x MQ4 Male


2x1695-2690 2x65 2x17 2 x 2-12
+
9 x 4.3-10
2099 x 499 x 206 *A08260PD05v06 SDA 381
4x1695-2690 (33|65) (19|16.5) (2 x 2-12 | 2-12) Female

2x690-960 2x65 2x16.5 2 x 2-12 2 x MQ4 Male


2x1695-2690 2x65 2x18 2 x 2-12
+
9 x 4.3-10
2695 x 499 x 206 *A08260PD06v06 SDA 385
4x1695-2690 (33|65) (20|17.5) (2 x 2-12 | 2-12) Female

9 x 4.3-10
2x690-960 2x65/ 2x15.5 2 x 2-12 Female
2x1695-2690 2x65/ 2x17 2 x 2-12 3 x MQ4
2695 x 499 x 206 A12264PD01v06 SDA 389
4x1695-2690 (33|65)/ (18|15.5)/ (2 x 2-12 | 2-12) Male +
4x2300-2690 65 20 2-12 1 x MQ5
Male

* Preliminary Issue

356
Product
Category
A06240PD01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.0 15.5 15.7 15.8
Gain (dBi)
Over all tilts 14.9±0.6 15.4±0.5 15.6±0.5 15.7±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 70±6 69±6 67±6
Vertical 3 dB beam width (°) 10.9±0.8 10.0±0.7 9.6±0.6 9.0±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 20 > 20 > 21 > 21
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –0.80±0.15 –0.80±0.15 –0.90±0.20 –1.00±0.20
Efficiency average (%) 83 83 81 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 17.2 17.7 18.1 18.6
Gain (dBi)
Over all tilts 17.0±0.8 17.5±0.6 18.0±0.6 18.5±0.6
Side lobe suppression for first side
> 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±6 70±6 63±5 58±4
Vertical 3 dB beam width (°) 6.5±0.6 5.9±0.6 5.3±0.5 4.7±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 18 > 18 > 18
Efficiency (dB) –0.93±0.20 –1.05±0.2 –1.20±0.20 –1.25±0.20
Efficiency average (%) 81 79 76 75
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

357
Product Product
List Category
A06240PD01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16 17.3 17.8 18.2 18.6
Gain (dBi)
Over all tilts 15.8±0.9 17.1±0.8 17.6±0.6 18.1±0.6 18.5±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 71±6 70±6 66±6 62±6
Vertical 3 dB beam width (°) 8.0±0.6 6.5±0.6 5.9±0.6 5.3±0.5 4.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 23 ≥ 25
Interband isolation (dB) ≥ 23 ≥ 25
Front to back ratio, ±30° (dB) > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 18 > 18
Efficiency (dB) –0.88±0.20 –0.93±0.2 –1.05±0.20 –1.20±0.20 –1.25±0.20
Efficiency average (%) 82 81 79 76 75
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties (FDD 8T8R)


4 x (1695–2690) (Ly1/Ry4/CLy2/CRy3)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Gain (dBi) 17.5 18.6
Horizontal 3 dB beam width (°) 70 60
Single column
beam Vertical 3 dB beam width (°) 6.2 4.7
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Gain (dBi) 22 23.5

Radiation Horizontal 3 dB beam width (°) 65 65


NR Broadcast beam
parameters Vertical 3 dB beam width (°) 6.2 4.8
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 22 23.5
0° direction beam horizontal 3 dB beam
21 15
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
Vertical 3 dB beam width (°) 6.2 4.8
Beam isolation (dB) ≥ 20 ≥ 20

358
Product Product
List Category
A06240PD01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 399 x 206

Packing dimensions (H x W x D) (mm) 2360 x 485 x 245

(601)
Antenna weight (kg) 35.0

Antenna packing weight (kg) 47.5 (Including clamps)

Radome material GFRPP*

Radome colour Light grey

Operational temperature (℃) –40 to +65

2009
1348
Frontal: 520 (at 150 km/h)
Wind load (N) Lateral: 435 (at 150 km/h)
Maximum: 720 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

Connector 13 x 4.3-10 Female

Connector position Bottom

60
*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2690 MHz Scenario-based Beam


(Ly1/Ry4) 1695–2690 MHz
(Ly1/CLy2/CRy3/Ry4 )

359
Product Product
List Category
A06240PD01v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x15.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 11–12

1–2 7–8 9-10


3–4
y1 y2 y3 y4
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N

1–2 Lr1 690–960 HWNxxxx….…..Lr1 \

3–4 Rr2 690–960 HWNxxxx…..…Rr2 \

5–6 Ly1 1695–2690 HWNxxxx……..Ly1

7–8 CLy2 1427–2690 HWNxxxx.….CLy2


HWXxxxx....y1234
9–10 CRy3 1427–2690 HWNxxxx…..CRy3

11–12 Ry4 1695–2690 HWNxxxx……..Ry4

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

360
Product Product
List Category
A06240PD02v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x16.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 16.1 16.3 16.6
Gain (dBi)
Over all tilts 15.6±0.7 16±0.5 16.2±0.5 16.4±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 70±6 69±6 67±6
Vertical 3 dB beam width (°) 8.9±0.8 8.1±0.7 7.8±0.6 7.4±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 20 > 20 > 21 > 21
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –0.95±0.15 –0.95±0.15 –1.05±0.20 –1.15±0.20
Efficiency average (%) 80 80 79 77
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 17.2 17.7 18.1 18.6
Gain (dBi)
Over all tilts 17.0±0.8 17.5±0.6 18.0±0.6 18.5±0.6
Side lobe suppression for first side
> 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±6 70±6 63±5 58±4
Vertical 3 dB beam width (°) 6.5±0.6 5.9±0.6 5.3±0.5 4.7±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 18 > 18 > 18
Efficiency (dB) –0.93±0.20 –1.05±0.20 –1.20±0.20 –1.25±0.20
Efficiency average (%) 81 79 76 75
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

361
Product Product
List Category
A06240PD02v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x16.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16 17.3 17.8 18.2 18.6
Gain (dBi)
Over all tilts 15.8±0.9 17.1±0.8 17.6±0.6 18.1±0.6 18.5±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±9 71±6 70±6 66±6 62±6
Vertical 3 dB beam width (°) 8.0±0.6 6.5±0.6 5.9±0.6 5.3±0.5 4.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 23 ≥ 25
Interband isolation (dB) ≥ 23 ≥ 25
Front to back ratio, ±30° (dB) > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 18 > 18
Efficiency (dB) –0.88±0.20 –0.93±0.20 –1.05±0.20 –1.20±0.20 –1.25±0.20
Efficiency average (%) 82 81 79 76 75
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties (FDD 8T8R)


4 x (1695–2690) (Ly1/Ry4/CLy2/CRy3)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Gain (dBi) 17.5 18.6
Horizontal 3 dB beam width (°) 70 60
Single column
beam Vertical 3 dB beam width (°) 6.2 4.7
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Gain (dBi) 22 23.5

Radiation Horizontal 3 dB beam width (°) 65 65


NR Broadcast beam
parameters Vertical 3 dB beam width (°) 6.2 4.8
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 22 23.5
0° direction beam horizontal 3 dB beam
21 15
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
Vertical 3 dB beam width (°) 6.2 4.8
Beam isolation (dB) ≥ 20 ≥ 20

362
Product Product
List Category
A06240PD02v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x16.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 399 x 206

Packing dimensions (H x W x D) (mm) 2950 x 485 x 250

(684.4)
Antenna weight (kg) 40.5

Antenna packing weight (kg) 56 (Including clamps)

Radome material GFRPP*

Radome colour Light grey

1806.6

2550
Operational temperature (℃) –40 to +65

Connector 13 x 4.3-10 Female

Connector position Bottom

Frontal: 680 (at 150 km/h)


Wind load (N) Lateral: 570 (at 150 km/h)
Maximum: 940 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

59
*GFRPP: Glass Fiber Reinforced Polypropylene
Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

363
Product Product
List Category
A06240PD02v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x16.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Port and Array Layout

5–6 11–12

1–2 7–8 9-10


3–4
y1 y2 y3 y4
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N

1–2 Lr1 690–960 HWNxxxx….…..Lr1 \

3–4 Rr2 690–960 HWNxxxx…..…Rr2 \

5–6 Ly1 1695–2690 HWNxxxx……..Ly1

7–8 CLy2 1427–2690 HWNxxxx.….CLy2


HWXxxxx....y1234
9–10 CRy3 1427–2690 HWNxxxx…..CRy3

11–12 Ry4 1695–2690 HWNxxxx……..Ry4

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2690 MHz Scenario-based Beam


(Ly1/Ry4) 1695–2690 MHz
(Ly1/CLy2/CRy3/Ry4 )

364
Product Product
List Category
A06240PD02v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-
2x16.5i/2x18i/2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

365
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°


2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 15.2 15.5 15.8 16.0 15.7 16.9 17.3 17.7 18.2
Gain (dBi)
Over all tilts 15.1±0.6 15.4±0.5 15.7±0.5 15.9±0.6 15.5±0.9 16.7±0.8 17.1±0.6 17.5±0.6 18.0±0.6
Side lobe suppression for first
> 16 > 17 > 17 > 16 > 15 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 67±6 66±6 70±8 67±6 66±6 64±6 58±6

Vertical 3 dB beam width (°) 10.6±0.8 10.0±0.7 9.6±0.6 9.2±0.5 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5

VSWR < 1.5 < 1.5

Cross polar isolation (dB) ≥ 25 ≥ 25

Interband isolation (dB) ≥ 25 ≥ 25

Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 22 > 21 > 25 > 25 > 26 > 26

Cross polar ratio, 0° (dB) > 16 > 16 > 16 > 15 > 15 > 15 > 16 > 16 > 16

Efficiency (dB) –0.80±0.15 –0.80±0.15 –0.90±0.20 –1.00±0.20 –0.95±0.20 –1.10±0.20 –1.15±0.2 -1.25±0.20 –1.30±0.20

Efficiency average (%) 83 83 81 79 80 78 77 75 74

Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50 50

Grounding DC grounding DC grounding

General Electrical Properties


4 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–2200 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately


General
Ports VSWR 1.5
parameters
Max. effective power per port (W) 120 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

366
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Electrical Properties - Scenario-based Beam 1 (FDD 8T8R)


4 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20

Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

Gain (dBi) 15.3 16.3

Horizontal 3 dB beam width (°) 95 85

Vertical 3 dB beam width (°) 7.5 5.6


Single column beam Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Efficiency (dB) –0.95 –1.20

Efficiency average (%) 80 76

Radiation Gain (dBi) 20.5 21.4


parameters Horizontal 3 dB beam width (°) 65 65
NR Broadcast beam
Vertical 3 dB beam width (°) 7.5 5.5
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 20.5 21.4
0° direction beam Horizontal 3 dB beam
27 20
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30

Vertical 3 dB beam width (°) 7.5 5.6

Beam isolation (dB) ≥ 20 ≥ 20

Appearance and Block Diagram of an 8T-4T Adapter

y2 y2 y3 y3

8T-4T Adapter

y2 y3

Antenna connected to an adapter

367
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Specifications of an Antenna Connected to an 8T-4T Adapter

Electrical Properties - Scenario-based Beam 2 (FDD 4T4R)


2 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 17.2 17.7 17.9 18.1


Gain (dBi)
Over all tilts 17.0±0.6 17.5±0.6 17.7±0.6 17.9±0.6
Side lobe suppression for first side
> 15 > 16 16 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 62±6 61±5 58±5 55±5

Vertical 3 dB beam width (°) 7.2±0.9 6.5±0.7 5.7±0.7 5.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 25

Interband isolation (dB) ≥ 25

Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25

Cross polar ratio, 0° (dB) > 16 > 15 > 15 > 15

Efficiency (dB) –1.10±0.20 –1.15±0.20 –1.35±0.20 –1.40±0.20

Efficiency average (%) 78 77 73 72

Antenna Specifications

Mechanical Properties 68

Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206

Packing dimensions (H x W x D) (mm) 2360 x 550 x 245

(585)
Antenna weight (kg) 39.2

Antenna packing weight (kg) 49.5 (Including clamps)

Radome material GFRPP*

Radome colour Light grey


1365
2009

Operational temperature (℃) –40 to +65

8 x 4.3-10 Female
Connector
2 x MQ4 Male + 1 x 4.3-10 Female (CAL)

Connector position Bottom

Frontal: 717 (at 150 km/h)


Wind load (N) Lateral: 412 (at 150 km/h)
Maximum: 945 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250


59

*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm

368
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Wind Load Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry4)

Scenario-based Beam 1 Scenario-based Beam 2


1695–2690 MHz 1695–2690 MHz
(CLy2/CRy3) (CLy2/CRy3)

369
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 9–10

7 8

1–2 3–4 y1 y2 y2 y3 y3 y4
r1 r2

8T8R-B/1695–2690

MQ4-1 MQ4-2 MQ4-3 MQ4-4

y2.CL+ y2.CL- y3.CR+ y3.CR-

L CL CR R

y2 y2 y3 y3

8T8R-A/1695–2690

MQ4-1 MQ4-2 MQ4-3 MQ4-4

y2.L+ y2.L- y3.R+ y3.R-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

* After an adapter is connected, y2 and y3 arrays support 4T4R mode.

Port Array Freq(MHz) RET S/N RAE S/N

1–2 Lr1 690–960 HWNxxxx…..…Lr1 \

3–4 Rr2 690–960 HWNxxxx…..…Rr2 \

5–6 Ly1 1427–2690 HWNxxxx.…....Ly1 \

CLy2 1695–2690 HWNxxxx…..CLy2


7-8 HWXxxxx…..y2y3
CRy3 1695–2690 HWNxxxx…..CRy3

9–10 Ry4 1427–2690 HWNxxxx…….Ry4 \

370
Product Product
List Category
A08260PD02v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x15.5i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with 6 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
4 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

371
Product Product
List Category
A08260PD07v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x17i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with Integrated RCUs – 2.6 m

Preliminary Issue

Electrical Properties
2 x (1427–2690)
Frequency range (MHz) 2 x (690–960)
1427–1518 1695–2690
Electrical downtilt (°) 2–12 2–12
Gain (dBi) 16.8 15.5 18.0
Side lobe suppression for first side
Typ.15 Typ.15 Typ.16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69 73 68
Vertical 3 dB beam width (°) 8.0 9.2 6.5
VSWR < 1.5
Front to back ratio,±30° (dB) Typ. 22 Typ. 25
Cross polar ratio, 0° (dB) Typ. 17 Typ. 17
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

General Electrical Properties


Frequency range (MHz) 4 x (1695–2690)
Electrical downtilt (°) 2–12
General parameters Max. effective power per port (W) 120
VSWR 1.5
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Electrical Properties–Scenario-based Beam (FDD 8T8R)


4 x (1695–2690)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Gain (dBi) 15.3 16.3
Horizontal 3 dB beam width (°) 95 85
Single column beam
Vertical 3 dB beam width (°) 7.5 5.6
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Gain (dBi) 20.5 21.4

Radiation Horizontal 3 dB beam width (°) 65 65


NR Broadcast beam
parameters Vertical 3 dB beam width (°) 7.5 5.5
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 20.5 21.4
0° direction beam Horizontal 3 dB beam
27 20
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
Vertical 3 dB beam width (°) 7.5 5.6
Beam isolation (dB) ≥ 20 ≥ 20

372
Product Product
List Category
A08260PD07v06
D08X-2x690-960/2x1427-2690/4x1695-2690-2x65/2x65/(4x90|2x65)-
2x17i/2x18i/(4x16i|2x18i)-6xM-R
EasyRET 16-Port 2L6H Antenna with Integrated RCUs – 2.6 m

* For details about specifications of the adapter, see ACAF12A00 Datasheet.

Specifications of the Antenna Connected to an 8T-4T Adapter

Electrical Properties–Scenario-based Beam (FDD 4T4R)


Frequency range (MHz) 1695–2690

Electrical downtilt (°) 2–12


Gain (dBi) 18.0
Side lobe suppression for first side
Typ.16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67
Vertical 3 dB beam width (°) 6.5
VSWR < 1.5
Front to back ratio,±30° (dB) Typ. 25
Cross polar ratio, 0° (dB) Typ. 17

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 499 x 206
Packing dimensions (H x W x D) (mm) 2810 x 565 x 285
Antenna net weight (kg) 49
8 x 4.3-10 Female
Connector
2 x MQ4 Male + 1 x 4.3-10 Female (CAL)
RET type Integrated RET
RET protocols AISG 2.0/3GPP

373
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1427–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200 2200–2490 2490–2690

Polarization +45°, –45°


2–12, continuously adjustable, each
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
band separately
At mid tilt 15.2 15.5 15.8 16.0 15.7 16.9 17.3 17.7 18.2
Gain (dBi)
Over all tilts 15.1±0.6 15.4±0.5 15.7±0.5 15.9±0.6 15.5±0.9 16.7±0.8 17.1±0.6 17.5±0.6 18.0±0.6
Side lobe suppression for first
> 16 > 17 > 17 > 16 > 15 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 67±6 66±6 70±8 67±6 66±6 64±6 58±6

Vertical 3 dB beam width (°) 10.6±0.8 10.0±0.7 9.6±0.6 9.2±0.5 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5

VSWR < 1.5 < 1.5

Cross polar isolation (dB) ≥ 25 ≥ 25

Interband isolation (dB) ≥ 25 ≥ 25

Front to back ratio, ±30° (dB) > 21 > 21 > 22 > 22 > 21 > 25 > 25 > 26 > 26

Cross polar ratio, 0° (dB) > 16 > 16 > 16 > 15 > 15 > 15 > 16 > 16 > 16

Efficiency (dB) –0.80±0.15 –0.80±0.15 –0.90±0.20 –1.00±0.20 –0.95±0.20 –1.10±0.20 –1.15±0.2 -1.25±0.20 –1.30±0.20

Efficiency average (%) 83 83 81 79 80 78 77 75 74

Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50 50

Grounding DC grounding DC grounding

General Electrical Properties


4 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–2200 2490–2690

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable, each band separately


General
Ports VSWR 1.5
parameters
Max. effective power per port (W) 120 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

374
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m

TDD LTE Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70

Single Front to back ratio (dB) ≥ 25 ≥ 25


column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 63

Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25


parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0

Service 0° direction beam horizontal 3 dB beam width (°) 26 18


beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /

5G NR Electrical Properties
2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70

Single Front to back ratio (dB) ≥ 25 ≥ 25


column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 16 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 18

375
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m

General Electrical Properties


4 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–2200 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
General
Ports VSWR 1.5
parameters
Max. effective power per port (W) 120 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties - Scenario-based Beam 1 (FDD 8T8R)


4 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20

Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

Gain (dBi) 14.9 15.9

Horizontal 3 dB beam width (°) 95 85

Vertical 3 dB beam width (°) 7.5 5.6


Single column beam Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Efficiency (dB) –1.2 –1.5

Efficiency average (%) 76 71

Radiation Gain (dBi) 20.1 21.0


parameters Horizontal 3 dB beam width (°) 65 65
NR Broadcast beam
Vertical 3 dB beam width (°) 7.5 5.5
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 20.1 21.0
0° direction beam Horizontal 3 dB beam
27 20
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30

Vertical 3 dB beam width (°) 7.5 5.6

Beam isolation (dB) ≥ 20 ≥ 20

376
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m

Appearance and Block Diagram of an 8T-4T Adapter

y2 y2 y3 y3

8T-4T Adapter

Antenna connected to an adapter


y2 y3

* For details about specifications of the adapter, see ACAF12A00 Datasheet.

Specifications of the Antenna Connected to an 8T-4T Adapter

Electrical Properties - Scenario-based Beam 2 (FDD 4T4R)


2 x (1695–2690) (CLy2/CRy3)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 16.8 17.3 17.5 17.7


Gain (dBi)
Over all tilts 16.6±0.6 17.1±0.6 17.3±0.6 17.5±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 62±6 61±5 58±5 55±5

Vertical 3 dB beam width (°) 7.2±0.9 6.5±0.7 5.7±0.7 5.2±0.5

VSWR < 1.5

Cross polar isolation (dB) ≥ 25

Interband isolation (dB) ≥ 25

Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25

Cross polar ratio, 0° (dB) > 16 > 15 > 15 > 15

Efficiency (dB) –1.30±0.20 –1.40±0.20 –1.60±0.20 –1.70±0.20

Efficiency average (%) 74 72 69 68

377
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 499 x 206

(690.6)
Packing dimensions (H x W x D) (mm) 2810 x 560 x 250

Antenna weight (kg) 49.0

Antenna packing weight (kg) 65.8 (Including clamps)

Radome material GFRPP*

Radome colour Light grey

Operational temperature (℃) –40 to +65

Frontal: 910 (at 150 km/h)

2550
1785
Wind load (N) Lateral: 523 (at 150 km/h)
Maximum: 1200 (at 150 km/h)

Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

8 x 4.3-10 Female
Connector 2 x MQ4 Male + 1 x 4.3-10 Female (CAL)
1 x MQ4 Male + 1 x MQ5 Male

Connector position Bottom

74.4
Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Wind Load Polar Chart

Port and Array Layout

5–6 9–10

y1 y2 y2 y3 y3 y4
11 7 8 12

1–2 3–4

r1 p1 p1 p1 p1 r2

378
Product Product
List Category
A12264PD02v06
D12X-2x690-960/2x1427-2690/4x1695-2690/4x2300-3800-
2x65/2x65/(4x90|2x65)/65-2x16.5i/2x18i/(4x16i|2x18i)/22i-7xM-R
EasyRET 24-Port 2L6H FDD/2.3-3.8 GHz TDD Antenna with 7 Integrated
RCUs – 2.6 m

8T8R-B/1695–2690
MQ4-1 MQ4-2 MQ4-3 MQ4-4
y2.CL+ y2.CL- y3.CR+ y3.CR-

L CL CR R

y2 y2 y3 y3

8T8R-A/1695–2690
MQ4-1 MQ4-2 MQ4-3 MQ4-4
y2.L+ y2.L- y3.R+ y3.R-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

* After an adapter is connected, y2 and y3 arrays support 4T4R mode.

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWNxxxx….…Lr1 \

3–4 Rr2 690–960 HWNxxxx….…Rr2 \

5–6 Ly1 1427–2690 HWNxxxx….…Ly1 \

9–10 Ry4 1427–2690 HWNxxxx…….Ry4 \

CLy2 1695–2690
7–8 HWNxxxx…..CLy2 HWXxxxx…..y2y3
CRy3 1695–2690

11–12 p1 2300-3800 HWNxxxx……….p1 HWXxxxx……….p1

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
4 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

379
Product Product
List Category
A04040PD03v06
D04X-2x1427-2690/2x1695-2690-4x65-2x19i/2x19i-4xM-R
EasyRET 8-Port 4H Antenna with 4 Integrated RCUs – 1.5 m

Preliminary Issue

Electrical Properties
Frequency range (MHz) 2 x (1695–2690) 2 x (1427–2690)

Electrical downtilt (°) 2–12 2–12

Gain (dBi) 18.6 18.6


Side lobe suppression for first
Typ. 16 Typ. 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68 68

Vertical 3 dB beam width (°) 5.9 5.9

VSWR < 1.5

Front to back ratio, ±30° (dB) Typ. 25 Typ. 25

Cross polar ratio, 0° (dB) Typ. 17 Typ. 17

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Electrical Properties (FDD 8T8R)


4 x (1695–2690)
Frequency range (MHz)
General 1695–2200 2490–2690
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20

Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

Gain (dBi) 17.5 18.6

Horizontal 3 dB beam width (°) 70 60


Single column
beam Vertical 3 dB beam width (°) 6.2 4.7
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
Gain (dBi) 22 23.5

Radiation Horizontal 3 dB beam width (°) 65 65


NR Broadcast beam
parameters Vertical 3 dB beam width (°) 6.2 4.8
Side lobe suppression for first side lobe
≥ 15 ≥ 16
above main beam (dB)
0° direction beam Gain (dBi) 22 23.5
0° direction beam horizontal 3 dB beam
21 15
width (°)
NR Service beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30

Vertical 3 dB beam width (°) 6.2 4.8

Beam isolation (dB) ≥ 20 ≥ 20

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1599 x 399 x 206

Antenna weight (kg) 29.0

Connector 9 x 4.3-10 Female

Connector position Bottom

380
Product Product
List Category
A08260PD05v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x15.5i/2x17i/(19i|16.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.0 m

Preliminary Issue

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°


Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 14.8 15.0 15.1 15.3


Gain (dBi)
Over all tilts 14.7±0.5 14.8±0.5 15.0±0.4 15.2±0.4
Side lobe suppression for first side
15 15 16 16
lobe above main beam (dB)

Horizontal 3dB beam width (°) 70±6 69±6 68±6 67±6

Vertical 3dB beam width (°) 11.0±0.8 10.0±0.6 9.7±0.5 9.0±0.5

VSWR < 1.5


Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 24
Cross polar ratio, 0° (dB) > 20 > 22 > 22 > 22
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/LTy2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.2 16.7 16.9 17.0
Gain (dBi)
Over all tilts 16.1±0.5 16.5±0.6 16.7±0.6 16.9±0.6
Side lobe suppression for first side
> 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69±5 67±5 64±5 59±5
Vertical 3dB beam width (°) 9.9±0.6 9.0±0.6 8.0±0.4 7.3±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

381
Product Product
List Category
A08260PD05v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x15.5i/2x17i/(19i|16.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.0 m

Electrical Properties–General Electrical Properties


Frequency range (MHz) 1695–2690 (RBy3/RTy4)

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable

Ports VSWR 1.5


General
parameters 160 (at 50℃ ambient
Max. effective power per port (W)
temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

Coupling factor between calibration port and each antenna port (dB) –30±2

Max. amplitude tolerance from calibration port to input ports (dB) 0.8
Calibration and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters
Co-polarization isolation between ports (dB) ≥ 25

Cross-polarization isolation between ports (dB) ≥ 25

With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1, Scenario-based beam 2 and Scenario-based beam 3 can be worked simultaneously.

Electrical Properties–Scenario-based Beam 1 (RAT: FDD-LTE)

1695–2690 (RBy3/RTy4)

Frequency range (MHz) 1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690

Sub-beam 1 Sub-beam 2

Electrical downtilt (°) 2–12, continuously adjustable

At mid tilt 17.6 18.3 18.7 19.0 17.6 18.3 18.7 19.0
Gain (dBi)
Over all tilts 17.5±0.9 18.2±0.9 18.6±0.9 18.9±0.9 17.5±0.9 18.2±0.9 18.6±0.9 18.9±0.9

Side lobe suppression for first side


> 15 > 16 > 16 > 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)

Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 10.0±0.8 9.0±0.6 8.0±0.4 7.3±0.4 10.0±0.8 9.0±0.6 8.0±0.4 7.3±0.4

VSWR < 1.5

Horizontal beam centers (°) –30 –28 –27 –25 30 28 27 25

Front to back ratio total, ±30° (dB) > 25 > 26 > 28 > 28 > 25 > 26 > 28 > 28

Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 16 > 15 > 15 > 16 > 16

382
Product Product
List Category
A08260PD05v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x15.5i/2x17i/(19i|16.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.0 m

Electrical Properties–Scenario-based Beam 2 (RAT: FDD-LTE)


1695–2690 (RBy3/RTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 15.1 15.8 16.3 16.5


Gain (dBi)
Over all tilts 15.0±0.9 15.7±0.8 16.2±0.8 16.4±0.8
Single column
beam Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 25
& Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Broadcast
Radiation beam Vertical 3dB beam width (°) 10.0±0.8 9.0±0.6 8.0±0.4 7.3±0.4
parameters
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
At mid tilt 20.4 21.0 21.6 21.8
Gain (dBi)
Over all tilts 20.3±0.9 20.9±0.8 21.4±0.8 21.7±0.8

Service beam Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 4.6±0.4 4.2±0.4 3.8±0.3 3.2±0.3


Front to back ratio total, ±30° (dB) > 27 > 27 > 27 > 27

Electrical Properties–Scenario-based Beam 3 (RAT: FDD-NR)


1695–2690 (RBy3/RTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 15.1 15.8 16.3 16.5


Gain (dBi)
Over all tilts 15.0±0.9 15.7±0.8 16.2±0.8 16.4±0.8
Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 25
Single column
beam Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3dB beam width (°) 10.0±0.8 9.0±0.6 8.0±0.4 7.3±0.4
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
Radiation At mid tilt 20.4 21.0 21.6 21.8
parameters Gain (dBi)
Over all tilts 20.3±0.9 20.9±0.8 21.4±0.8 21.7±0.8
Broadcast beam
Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 25
Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3dB beam width (°) 10.0±0.8 9.0±0.6 8.0±0.4 7.3±0.4

At mid tilt 20.4 21.0 21.6 21.8


Gain (dBi)
Over all tilts 20.3±0.9 20.9±0.8 21.4±0.8 21.7±0.8

Service beam Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 4.6±0.4 4.2±0.4 3.8±0.3 3.2±0.3


Front to back ratio total, ±30° (dB) > 27 > 27 > 27 > 27

383
Product Product
List Category
A08260PD05v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x15.5i/2x17i/(19i|16.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.0 m

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206

Packing dimensions (H x W x D) (mm) 2360 x 560 x 260

Antenna net weight (kg) 46.5

Clamps weight (kg) 6.3 (2 units)

Antenna packing weight (kg) 63.8 (Including clamps)

Mast diameter supported (mm) 50–115

Radome material GFRPP*

Radome colour Light grey

Operational temperature (℃) –40 to +65


Frontal: 749 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 988 (at 150 km/h)
Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

2 x MQ4 Male + 1 x 4.3-10 Female (CAL)


Connector
8 x 4.3-10 Female

Connector position Bottom

Wind Load Polar Chart

Accessories

Item Model Description Weight Units per antenna


Downtilt kit ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

384
Product Product
List Category
A08260PD06v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x16.5i/2x18i/(20i|17.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.6 m

Preliminary Issue

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°


Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 15.8 15.9 16.1 16.4


Gain (dBi)
Over all tilts 15.7±0.5 15.8±0.5 16.0±0.5 16.3±0.5
Side lobe suppression for first side
17 15 15 16
lobe above main beam (dB)

Horizontal 3dB beam width (°) 70±6 68±6 65±6 63±6

Vertical 3dB beam width (°) 8.6±0.6 8.0±0.5 7.6±0.3 7.2±0.3

VSWR < 1.5


Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 23 > 24 > 24 > 24
Cross polar ratio, 0° (dB) > 20 > 22 > 22 > 22
Max. effective power per port (W) 400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/LTy2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.8 17.3 17.7 18.0
Gain (dBi)
Over all tilts 16.7±0.6 17.1±0.5 17.6±0.6 17.9±0.5
Side lobe suppression for first side
> 16 > 16 > 15 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69±5 67±5 64±5 59±5
Vertical 3dB beam width (°) 7.6±0.5 6.9±0.5 6.2±0.4 5.5±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

385
Product Product
List Category
A08260PD06v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x16.5i/2x18i/(20i|17.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.6 m

Electrical Properties–General Electrical Properties


Frequency range (MHz) 1695–2690 (RBy3/RTy4)

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable

Ports VSWR 1.5


General
parameters 160 (at 50℃ ambient
Max. effective power per port (W)
temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

Coupling factor between calibration port and each antenna port (dB) –30±2

Max. amplitude tolerance from calibration port to input ports (dB) 0.8
Calibration and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters
Co-polarization isolation between ports (dB) ≥ 25

Cross-polarization isolation between ports (dB) ≥ 25

With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1, Scenario-based beam 2 and Scenario-based beam 3 can be worked simultaneously.

Electrical Properties–Scenario-based Beam 1 (RAT: FDD-LTE)

1695–2690 (RBy3/RTy4)

Frequency range (MHz) 1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690

Sub-beam 1 Sub-beam 2

Electrical downtilt (°) 2–12, continuously adjustable

At mid tilt 18.6 19.3 19.7 20.0 18.6 19.3 19.7 20.0
Gain (dBi)
Over all tilts 18.5±0.9 19.2±0.9 19.6±0.9 19.9±0.9 18.5±0.9 19.2±0.9 19.6±0.9 19.9±0.9

Side lobe suppression for first side


> 15 > 16 > 16 > 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)

Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 7.8±0.7 6.9±0.5 6.1±0.3 5.5±0.3 7.8±0.7 6.9±0.5 6.1±0.3 5.5±0.3

VSWR < 1.5

Horizontal beam centers (°) –30 –28 –27 –25 30 28 27 25

Front to back ratio total, ±30° (dB) > 25 > 27 > 28 > 28 > 25 > 27 > 28 > 28

Cross polar ratio at boresight (dB) > 15 > 17 > 17 > 17 > 15 > 17 > 17 > 17

386
Product Product
List Category
A08260PD06v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x16.5i/2x18i/(20i|17.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.6 m

Electrical Properties–Scenario-based Beam 2 (RAT: FDD-LTE)


1695–2690 (RBy3/RTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 16.0 16.7 17.3 17.5


Gain (dBi)
Over all tilts 15.9±0.9 16.6±0.8 17.2±0.8 17.4±0.8
Single
column Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
beam
& Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Broadcast
Radiation Vertical 3dB beam width (°) 7.8±0.7 6.9±0.5 6.1±0.3 5.5±0.3
beam
parameters
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
At mid tilt 21.3 22.0 22.6 22.8
Gain (dBi)
Over all tilts 21.2±0.9 21.9±0.8 22.4±0.8 22.6±0.8

Service beam Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 3.6±0.3 3.1±0.2 2.9±0.2 2.5±0.2


Front to back ratio total, ±30° (dB) > 27 > 29 > 29 > 29

Electrical Properties–Scenario-based Beam 3 (RAT: FDD-NR)


1695–2690 (RBy3/RTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690

At mid tilt 16.0 16.7 17.3 17.5


Gain (dBi)
Over all tilts 15.9±0.9 16.6±0.8 17.2±0.8 17.4±0.8
Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
Single
column beam Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3dB beam width (°) 7.8±0.7 6.9±0.5 6.1±0.3 5.5±0.3
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Radiation At mid tilt 21.3 22.0 22.6 22.8
parameters Gain (dBi)
Over all tilts 21.2±0.9 21.9±0.8 22.4±0.8 22.6±0.8
Broadcast
beam Front to back ratio total, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3dB beam width (°) 7.8±0.7 6.9±0.5 6.1±0.3 5.5±0.3

At mid tilt 21.3 22.0 22.6 22.8


Gain (dBi)
Over all tilts 21.2±0.9 21.9±0.8 22.4±0.8 22.6±0.8

Service beam Horizontal 3dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3dB beam width (°) 3.6±0.3 3.1±0.2 2.9±0.2 2.5±0.2


Front to back ratio total, ±30° (dB) > 27 > 29 > 29 > 29

387
Product Product
List Category
A08260PD06v06
D08X-2x690-960/2x1695-2690/4x1695-2690-4x65/(33|65)-
2x16.5i/2x18i/(20i|17.5i)-6xM-R
Sector Reconfigurable Software Defined Antenna with Integrated RCUs –
2.6 m

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2695 x 499 x 206

Packing dimensions (H x W x D) (mm) 2960 x 560 x 255

Antenna net weight (kg) 56.0

Clamps weight (kg) 6.3 (2 units)

Antenna packing weight (kg) 74 (Including clamps)

Mast diameter supported (mm) 50–115

Radome material GFRPP*

Radome colour Light grey

Operational temperature (℃) –40 to +65


Frontal: 961 (at 150 km/h)
Wind load (N) Lateral: 552 (at 150 km/h)
Maximum: 1268 (at 150 km/h)
Max. operational wind speed (km/h) 200

Survival wind speed (km/h) 250

2 x MQ4 Male + 1 x 4.3-10 Female (CAL)


Connector
8 x 4.3-10 Female

Connector position Bottom

Accessories

Item Model Description Weight Units per antenna


Downtilt kit ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

388
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960

Polarization +45°, –45°


Electrical downtilt (°) 2–12, continuously adjustable, each band separately

At mid tilt 15.8 15.9 16.1 16.5


Gain (dBi)
Over all tilts 15.7±0.5 15.8±0.5 16.0±0.5 16.3±0.5

Side lobe suppression for first side


> 15 > 15 > 15 > 16
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 70±6 69±6 66±6 65±6

Vertical 3 dB beam width (°) 8.5±0.6 7.8±0.5 7.5±0.5 7.1±0.5

VSWR < 1.5


Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 23 > 24 > 24 > 24
Cross polar ratio, 0° (dB) > 20 > 22 > 22 > 22
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (Ly1/Ry5)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.8 17.3 17.7 18.0
Gain (dBi)
Over all tilts 16.7±0.6 17.1±0.5 17.6±0.6 17.9±0.5
Side lobe suppression for first side
> 16 > 16 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±6 66±6 62±6 59±6
Vertical 3 dB beam width (°) 7.7±0.6 7.0±0.6 6.2±0.4 5.5±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 20
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

389
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Electrical Properties–General Electrical Properties(RAT: FDD)


Frequency range (MHz) 1695–2690 (CMy3/CTy4)

Polarization +45°, –45°

Electrical downtilt (°) 2–12, continuously adjustable

Ports VSWR 1.5


General
parameters 150 (at 50℃ ambient
Max. effective power per port (W)
temperature)

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Impedance (Ω) 50

Grounding DC grounding

Coupling factor between calibration port and each antenna port (dB) –30±2

Max. amplitude tolerance from calibration port to input ports (dB) 0.8
Calibration and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters
Co-polarization isolation between ports (dB) ≥ 25

Cross-polarization isolation between ports (dB) ≥ 25

With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1, Scenario-based beam 2 and Scenario-based beam 3 can be worked simultaneously.

Electrical Properties–Scenario-based Beam 1 (RAT: FDD-LTE)

1695–2690 (CMy3/CTy4)

1695– 1920– 2200– 2490– 1695– 1920– 2200– 2490–


Frequency range (MHz)
1990 2200 2490 2690 1990 2200 2490 2690

Sub-beam 1 Sub-beam 2

Electrical downtilt (°) 2–12, continuously adjustable

At mid tilt 17.3 18.3 18.5 18.6 17.3 18.3 18.5 18.6
Gain (dBi)
Over all tilts 17.2±0.9 18.2±0.9 18.4±0.9 18.5±0.9 17.2±0.9 18.2±0.9 18.4±0.9 18.5±0.9

Side lobe suppression for first side


> 16 > 16 > 16 > 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 35±4 32±3 31±2 30±2 35±4 32±3 31±2 30±2

Vertical 3 dB beam width (°) 10.0±0.7 9.0±0.6 8.0±0.5 7.4±0.5 10.0±0.7 9.0±0.6 8.0±0.5 7.4±0.5

VSWR < 1.5

Horizontal beam centers (°) -30 -28 -27 -25 30 28 27 25

Front to back ratio, ±30° (dB) > 25 > 26 > 28 > 28 > 25 > 26 > 28 > 28

Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 16 > 15 > 15 > 16 > 16

390
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Electrical Properties–Scenario-based Beam 2 (RAT: FDD-LTE)


1695–2690 (CMy3/CTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
At mid tilt 14.6 15.5 15.7 15.9
Gain (dBi)
Over all tilts 14.5±0.9 15.4±0.9 15.6±0.9 15.8±0.9
Single column
Front to back ratio, ±30° (dB) > 23 > 24 > 24 > 25
beam
& Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Broadcast beam
Radiation Vertical 3 dB beam width (°) 10.0±0.7 9.0±0.6 8.0±0.5 7.4±0.5
parameters
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
At mid tilt 20.1 21.1 21.3 21.4
Gain (dBi)
Over all tilts 20.0±0.9 21.0±0.9 21.2±0.9 21.3±0.9

Service beam Horizontal 3 dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3 dB beam width (°) 5.0±0.4 4.5±0.4 4.0±0.3 3.7±0.3


Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

Electrical Properties–Scenario-based Beam 3 (RAT: FDD-NR)


1695–2690 (CMy3/CTy4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
At mid tilt 14.6 15.5 15.7 15.9
Gain (dBi)
Over all tilts 14.5±0.9 15.4±0.9 15.6±0.9 15.8±0.9
Front to back ratio, ±30° (dB) > 23 > 24 > 24 > 25
Single column
beam Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3 dB beam width (°) 10.0±0.7 9.0±0.6 8.0±0.5 7.4±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)
Radiation At mid tilt 20.1 21.1 21.3 21.4
Gain (dBi)
parameters Over all tilts 20.0±0.9 21.0±0.9 21.2±0.9 21.3±0.9
Broadcast beam
Front to back ratio, ±30° (dB) > 23 > 24 > 24 > 25
Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15
Vertical 3 dB beam width (°) 10.0±0.7 9.0±0.6 8.0±0.5 7.4±0.5
At mid tilt 20.1 21.1 21.3 21.4
Gain (dBi)
Over all tilts 20.0±0.9 21.0±0.9 21.2±0.9 21.3±0.9

Service beam Horizontal 3 dB beam width (°) 35±4 32±3 31±2 30±2

Vertical 3 dB beam width (°) 5.0±0.4 4.5±0.4 4.0±0.3 3.7±0.3


Front to back ratio, ±30° (dB) > 27 > 27 > 27 > 27

391
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Electrical Properties–General Electrical Properties (RAT: TDD)


Frequency range (MHz) 2300–2690 (CBy2)
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General
parameters Electrical downtilt tolerance (°) ±1
Max. effective power per port (W) 50 (at 50℃ ambient temperature)
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and
–26±2
each antenna port (dB)
Max. amplitude tolerance from calibration port to
0.7
input ports (dB)
Calibration and Max. phase tolerance from calibration port to input
electrical 6
ports (°)
parameters
Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23

Electrical Properties (RAT: TDD-LTE)


Frequency range (MHz) 2300–2690 (CBy2)
Gain (dBi) 15.0
Horizontal 3 dB beam width (°) 90
Front to back ratio (dB) ≥ 25
Single column
beam Cross polar ratio, 0° (dB) ≥ 15
Vertical 3 dB beam width (°) 8.0
Side lobe suppression for first side lobe above main beam
≥ 15
(dB)
Gain (dBi) 16.2
Horizontal 3 dB beam width (°) 65

65° Broadcast Front to back ratio (dB) ≥ 26


Radiation
beam Cross polar ratio, 0° (dB) ≥ 17
parameters
Vertical 3 dB beam width (°) 8.0
Side lobe suppression for first side lobe above main beam (dB) ≥ 15
0° direction beam gain (dBi) 20.2
0° direction beam horizontal 3 dB beam width (°) 26
Service beam
0° direction beam front to back ratio (dB) ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18
Gain (dBi) 19.4

Soft split Horizontal 3 dB beam width (°) 31


multi-beam Front to back ratio (dB) ≥ 30
Cross ploar ratio at boresight (dB) ≥ 19

392
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Electrical Properties (RAT: TDD-NR)


Frequency range (MHz) 2300–2690 (CBy2)
Gain (dBi) 15.0
Horizontal 3 dB beam width (°) 90
Front to back ratio (dB) ≥ 25
Single
column beam Cross polar ratio, 0° (dB) ≥ 15
Vertical 3 dB beam width (°) 8.0
Side lobe suppression for first side lobe above main beam
≥ 15
(dB)
Radiation Gain (dBi) 19.9
parameters
Horizontal 3 dB beam width (°) 65
NR Broadcast
Front to back ratio (dB) ≥ 26
beam
Vertical 3 dB beam width (°) 8.0
Side lobe suppression for first side lobe above main beam (dB) ≥ 16
0° direction beam gain (dBi) 20.2
NR 0° direction beam horizontal 3 dB beam width (°) 26
Service beam 0° direction beam front to back ratio (dB) ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 2695 x 499 x 206


Packing dimensions (H x W x D) (mm) 2960 x 560 x 255
Antenna net weight (kg) 58.0

(735)
Antenna packing weight (kg) 75.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
FDD 4T: 8 x 4.3-10 Female
FDD 8T: 2 x MQ4 Male + 1 x 4.3-10
1885
2695
Connector
Female (CAL)
TDD 8T: 1 x MQ5 Male + 1 x MQ4 Male
Connector position Bottom
Frontal: 961 (at 150 km/h)
Wind load (N) Lateral: 552 (at 150 km/h)
Maximum: 1268 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
75

Unit: mm

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

393
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Wind Load Polar Chart

Port and Array Layout

y4

5–6 11–12

y3

7 8 9 10

1–2 3–4
y2 y2 y2 y2
y1 y5
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx…………Lr1 \

3–4 Rr2 690–960 HWMxxxx………..Rr2 \

5–6 Ly1 1695–2690 HWMxxxx………..Ly1 \

11–12 Ry5 1695–2690 HWMxxxx………..Ry5 \

7–8 CBy2 2300–2690 HWMxxxx…….CBy2 HWXxxxx………….y2

9 CMy3 1695–2690 HWMxxxx…...CMy3


HWXxxxx……..y3y4
10 CTy4 1695–2690 HWMxxxx……..CTy4

L CL CR R

4T4R/8T8R-A 4T4R/8T8R-B

MQ4-1 y3.L+ MQ4-1 y4.L+

MQ4-2 y3.L- MQ4-2 y4.L-

MQ4-3 y3.R+ MQ4-3 y4.R+


MQ5-4 y2.L+ MQ5-3 y2.CL+ MQ5-2 y2.CR+ MQ5-1 y2.R+
MQ4-4 y3.R- MQ4-4 y4.R-
MQ4-4 y2.L– MQ4-3 y2.CL– MQ4-2 y2.CR– MQ4-1 y2.R–

394
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

FDD pattern sample for reference

690–960 MHz 1695–2690 MHz


(Lr1/Rr2) (Ly1/Ry5)

Scenario-based Beam 1

Sub-beam 1 Sub-beam 2
(1695–2690 MHz) (1695–2690 MHz)

395
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

Scenario-based Beam 2

Single column beam Service beam Service beam


& Broadcast beam (1695–2690 MHz) (1695–2690 MHz)
(1695–2690 MHz)

Scenario-based Beam 3

Single column beam Broadcast beam


(1695–2690 MHz) (1695–2690 MHz)

Service beam Service beam


(1695–2690 MHz) (1695–2690 MHz)

396
Product Product
List Category
A12264PD01v06
D12X-2x690-960/2x1695-2690/4x1695-2690/4x2300-2690-
4x65/(33|65)/65-2x15.5i/2x17i/(18i|15.5i)/20i-7xM-R
Sector Reconfigurable Software Defined Antenna with 7 Integrated RCUs –
2.6 m

TDD pattern Sample for reference

Single column 65° Broadcast Service 0°


(2300–2690 MHz) (2300–2690 MHz) (2300–2690 MHz)

5G NR Broadcast Multi-Beam –30° Multi-Beam +30°


(2300–2690 MHz) (2300–2690 MHz) (2300–2690 MHz)

397
Product Product
List Category
B. Passive Antenna
FDD + NR\TDD Antenna

3dB
Frequency Range Horizontal Electrical
Gain (dBi) Connector Dimension(mm) Model Platform Page
(MHz) Beam Downtilt (o)
Width (o)

2x690-960 2x8.5 0 fixed


2x1695-2690 6x65 2x11 3 fixed 12 x 4.3-10 Female 485 x 369 x 149 ASI451000v06 / 399
2x2300-380 2x11 3 fixed

2x690-960 2x15.5 2 x 2-12


12 x 4.3-10 Female
2x1427-2690 2x18 2 x 2-12
2x1695-2690
7x65
2x18 2 x 2-12
1 x MQ4 Male + 2099 x 469 x 206 A104521R03v06 London Pro 402
1 x MQ5 Male
4x2300-3800 22 2-12

2x690-960 2x16.5 2 x 2-12


12 x 4.3-10 Female
2x1427-2690 2x17.5 2 x 2-12
2x1695-2690
7x65
2x17.5 2 x 2-12
1 x MQ4 Male + 2550 x 469 x 206 A104521R0v06 London Pro 408
1 x MQ5 Male
4x2300-3800 21 2-12

2x690-960 2x14.5 2 x 0-14


2x1427-2200 2x16 2 x 2-12 14 x 4.3-10 Female
2x2490-2690 8x65 2x17 2 x 2-12 1 x MQ4 Male + 1509 x 499 x 206 A114521R1v06 London 414
1695-2690 17 2-12 1 x MQ5 Male
4x3300-3800 21 2-12

2x690-960 2x15.5 2 x 2-12


2x1427-2690 2x18 2 x 2-12 16 x 4.3-10 Female
2x1695-2200 9x65 2x17 2 x 2-12 1x MQ4 Male + 2099 x 469 x 206 A124522R01v06 London Pro 421
2x2490-2690 2x17.5 2 x 2-12 1x MQ5 Male
4x2300-3800 22 2-12

2x690-960 2x16.5 2 x 2-12


2x1427-2690 2x18 2 x 2-12 16 x 4.3-10 Female
2x1695-2200 9x65 2x17 2 x 2-12 1 x MQ4 Male + 2550 x 469 x 206 A124522R02v06 London Pro 428
2x2490-2690 2x17.5 2 x 2-12 1 x MQ5 Male
4x2300-3800 22 2-12

2x690-960 2x15.5 2 x 2-12


2x1427-2690 2x18 2 x 2-12 12 x 4.3-10 Female
2x1695-2690 8x65 2x18 2 x 2-12 2x MQ4 Male + 2099 x 499 x 206 A144522R02v06 London Pro 435
4x2300-3800 22 2-12 2x MQ5 Male
4x2300-3800 22 2-12

2x690-960 2x16.5 2 x 2-12


2x1427-2690 2x18 2 x 2-12 12 x 4.3-10 Female
2x1695-2690 8x65 2x18 2 x 2-12 2 x MQ4 Male + 2550 x 499 x 206 A144521R01v06 London Pro 441
4x2300-3800 22 2-12 2 x MQ5 Male
4x2300-3800 22 2-12

2x690-960 2x15.5 2 x 2-12


2x1427-2690 2x18 2 x 2-12
16 x 4.3-10 Female
2x1695-2200 2x17 2 x 2-12
2x2490-2690
10x65
2x17.5 2 x 2-12
2x MQ4 Male + 2099 x 499 x 206 A164522R01v06 London Pro 447
2x MQ5 Male
4x2300-3800 22 2-12
4x2300-3800 22 2-12

* Preliminary Issue

398
Product
Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-
6x65-2x8.5i/2x11i/2x11i-3F

Antenna Specifications

Electrical Properties
2 x (690–960) (Br1/Tr2) 2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz) 690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 0, fixed 3, fixed
Gain (dBi) 7.5±0.5 8.0±0.5 8.2±0.5 8.5±0.5 11.0±0.5 11.5±0.5 11.5±0.5 11.6±0.5
Horizontal 3 dB beam width (°) 67±4 64±5 62±5 60±5 66±7 61±6 63±5 67±5
Vertical 3 dB beam width (°) 84±8 77±8 75±8 74±7 40±4 36±4 28±4 24±4
VSWR < 1.8 < 1.5
Cross polar isolation (dB) ≥ 22 ≥ 22
Interband isolation (dB) ≥ 23 ≥ 23
Front to back ratio, ±30° (dB) > 19 > 19 > 20 > 19 > 20 > 20 > 21 >20
Cross polar ratio, 0° (dB) > 18 > 18 > 17 > 18 > 18 >17 >17 >17
Max. effective power per port (W) 160 (at 50℃ ambient temperature)* 120 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
Electrical downtilt (°) 3, fixed
Gain (dBi) 10.6±0.5 11.5±0.5
Horizontal 3 dB beam width (°) 61±5 57±6
Vertical 3 dB beam width (°) 39±4 23±4
VSWR < 1.5
Cross polar isolation (dB) ≥ 22 ≥ 22
Interband isolation (dB) ≥ 23 ≥ 23
Front to back ratio, ±30° (dB) > 20 > 20
Cross polar ratio, 0° (dB) > 15 > 15
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 500 W (at 50℃ ambient temperature)

399 3
Product Product 9
List Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-
6x65-2x8.5i/2x11i/2x11i-3F

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 485 x 369 x 149
Packing dimensions (H x W x D) (mm) 750 x 470 x 265
Antenna weight (kg) 7.8
Antenna packing weight (kg) 14.2 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –55 to +65
Connector 12 x 4.3-10 Female
Connector position Bottom
Frontal: 130 (at 150 km/h)
Wind load (N) Lateral: 40 (at 150 km/h)
Maximum: 155 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–20° 1.3 kg 1 (Separate packing)

68 485

520

Unit: mm
23

4
0
0

400
Product Product
List Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-
6x65-2x8.5i/2x11i/2x11i-3F

Port and Array Layout

5–6
9–10 11–12

7–8 y1 y2
r2

1–2 3–4
p1 p2
r1

Port Array Freq(MHz)


1–2 Br1 690–960
3–4 Tr2 690–960
5–6 Ly1 1695–2690
7–8 Ry2 1695–2690
9–10 Lp1 2300–3800
11–12 Rp2 2300–3800

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 2300–3800 MHz


(Br1/Tr2) (Ly1/Ry2) (Lp1/Rp2)

401
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.0 15.2 15.4 15.5 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 14.9±0.5 15.1±0.5 15.3±0.5 15.4±0.5 16.7±0.7 17.3±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 69±6 66±6 63±6 66±6 64±6 62±5 58±6
Vertical 3 dB beam width (°) 10.8±0.8 10.0±0.6 9.5±0.6 8.8±0.5 7.7±0.8 6.8±0.7 6.2±0.5 5.4±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio,±30° (dB) > 21 > 22 > 22 > 22 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 17 > 17 > 18
Efficiency (dB) –1.46 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 72 81 80 77 76
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.9 18.5
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.8±0.5 18.4±0.5
Side lobe suppression for first side
> 15 > 16 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 66±6 61±5 58±7
Vertical 3 dB beam width (°) 9.3±0.7 7.6±0.7 6.8±0.6 6.2±0.5 5.4±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio,±30° (dB) > 25 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

402
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

General Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.45±0.30 –1.85±0.30
Efficiency average (%) 72 65
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
Calibration 0.7 0.9
ports (dB)
and
electrical Max. phase tolerance from calibration port to input ports (°) 6 8
parameters Ports VSWR 1.5 1.5
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 63
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

403
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

5G NR Electrical Properties
2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 16 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 18

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 469 x 206
Packing dimensions (H x W x D) (mm) 2365 x 555 x 255

(605)
Antenna weight (kg) 41.2
Antenna packing weight (kg) 57.6 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃ ) –40 to +65
2099

12 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
1435

Connector position Bottom


Frontal: 597 (at 150 km/h)
Wind load (N) Lateral: 458 (at 150 km/h)
Maximum: 781 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
59

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

404
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
4 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

405
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 7–8 9–10 11–12

13–14 y1 y2 y3 y4

1–2 3–4
p1 p1 p1 p1
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx……..Lr1 \

3–4 Rr2 690–960 HWMxxxx……..Rr2 \

5–6 Ly1 1695–2690 HWMxxxx……..Ly1 \

7–8 CLy2 1427–2690 HWMxxxx……CLy2 \

9–10 CRy3 1427–2690 HWMxxxx…...CRy3 \

11–12 Ry4 1695–2690 HWMxxxx….....Ry4 \

13–14 p1 2300–3800 HWMxxxx……….p1 HWXxxxx……..p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

406
Product Product
List Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


1427–2690 MHz
(Lr1/Rr2) (Ly1/Ry4)
(CLy2/CRy3)

Single column 65° Broadcast Service 0°


(2300–3800 MHz) (2300–3800 MHz) (2300–3800 MHz)

5G NR Broadcast Multi-Beam –30° Multi-Beam +30°


(2300–3800 MHz) (2300–2690 MHz) (2300–2690 MHz)

407
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.5 15.8 16.0 16.2 16.9 17.5 17.8 18.3
Gain (dBi)
Over all tilts 15.4±0.5 15.7±0.5 15.9±0.5 16.0±0.5 16.8±0.7 17.4±0.5 17.7±0.5 18.3±0.5
Side lobe suppression for first side
> 15 > 16 > 15 > 15 > 16 > 15 > 15 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 68±5 65±5 60±5 66±6 64±6 62±5 58±6
Vertical 3 dB beam width (°) 8.8±0.7 8.1±0.5 7.8±0.5 7.3±0.4 7.2±0.8 6.5±0.8 5.7±0.6 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 24 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 16 > 15 > 16 > 17
Efficiency (dB) –1.60 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 69 81 80 77 76
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.9 17.5 17.9 18.5
Gain (dBi)
Over all tilts 15.2±0.6 16.8±0.5 17.4±0.5 17.8±0.5 18.5±0.5
Side lobe suppression for first side
> 15 > 16 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 67±6 61±5 58±7
Vertical 3 dB beam width (°) 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 17 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.2 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

408
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

General Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.45±0.30 –1.85±0.30
Efficiency average (%) 72 65
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
Calibration 0.7 0.9
ports (dB)
and
electrical Max. phase tolerance from calibration port to input ports (°) 6 8
parameters Ports VSWR 1.5 1.5
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 63
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

409
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

5G NR Electrical Properties
2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 16 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 18

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 469 x 206

(693)
Packing dimensions (H x W x D) (mm) 2825 x 555 x 255
Antenna weight (kg) 45.8
Antenna packing weight (kg) 62.3 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃ ) –40 to +65
2550

12 x 4.3-10 Female
1782

Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom
Frontal: 725 (at 150 km/h)
Wind load (N) Lateral: 556 (at 150 km/h)
Maximum: 949 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
75

*GFRPP: Glass Fiber Reinforced Polypropylene


Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

410
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
4 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

411
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

Port and Array Layout

5–6 7–8 9–10 11–12

13–14
y1 y2 y3 y4

1–2 3–4

p1 p1 p1 p1
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx……..Lr1 \

3–4 Rr2 690–960 HWMxxxx……..Rr2 \

5–6 Ly1 1695–2690 HWMxxxx……..Ly1 \

7–8 CLy2 1427–2690 HWMxxxx……CLy2 \

9–10 CRy3 1427–2690 HWMxxxx…...CRy3 \

11–12 Ry4 1695–2690 HWMxxxx….....Ry4 \

13–14 p1 2300–3800 HWMxxxx……….p1 HWXxxxx……..p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

412
Product Product
List Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x65-
2x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-Port 2L4H FDD/2.3-3.8GHz
8T8R TDD Antenna with 7 Integrated RCUs – 2.6 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)

Single column 65° Broadcast Service 0°


(2300–3800 MHz) (2300–3800 MHz) (2300–3800 MHz)

5G NR Broadcast Multi-Beam –30° Multi-Beam +30°


(2300–3800 MHz) (2300–2690 MHz) (2300–2690 MHz)

413
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 0–14, continuously adjustable, each band separately
At mid tilt 13.5 13.8 14.0 14.1
Gain (dBi)
Over all tilts 13.5±0.5 13.7±0.5 13.9±0.5 14.0±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)

Horizontal 3 dB beam width (°) 69±7 68±6 68±6 67±6

Vertical 3 dB beam width (°) 14.9±1.4 13.5±1.3 12.8±1.2 12.2±1.1


VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 20 > 21 > 22 > 22
Cross polar ratio, 0°(dB) > 17 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1427–2200) (Lb1/Rb2)
Frequency range (MHz) 2 x (2490–2690) (Ly1/Ry3)
1427–1518 1695–1990 1920–2200
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt 15.4 16.5 16.8 17.1
Gain (dBi)
Over all tilts 15.2±0.6 16.4±0.5 16.7±0.5 17.0±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±7 62±6 60±6 58±5
Vertical 3 dB beam width (°) 9.1±0.8 7.5±0.7 6.8±0.6 5.3±0.5
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 23 > 26 > 25 > 24
Cross polar ratio, 0° (dB) > 17 > 18 > 18 > 17
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

414
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Electrical Properties
1695–2690(Cy2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
At mid tilt 16.6 17.0 17.1 17.4
Gain (dBi)
Over all tilts 16.5±0.5 16.9±0.5 17.0±0.6 17.3±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±6 61±6 60±6 58±6
Vertical 3 dB beam width (°) 7.2±0.6 6.5±0.6 5.7±0.5 5.2±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

General Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26 ±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
Calibration 0.9
ports (dB)
and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23

* Max. effective power whole antenna: 800 W (at 50℃ ambient temperature)

415
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

TDD LTE Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.6
Horizontal 3 dB beam width (°) 70
Single Front to back ratio (dB) ≥ 24
column Cross polar ratio, 0° (dB) ≥ 15
beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above
≥ 15
main beam (dB)
Gain (dBi) 16.9
Radiation
Horizontal 3 dB beam width (°) 65
parameters
65° Front to back ratio (dB) ≥ 25
Broadcast Cross polar ratio, 0° (dB) ≥ 15
beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above
≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.7
Service 0° direction beam horizontal 3 dB beam width (°) 21
beam 0° direction beam front to back ratio (dB) ≥ 30
0° direction beam cross polar ratio (dB) ≥ 19
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

5G NR Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.6
Horizontal 3 dB beam width (°) 70
Single Front to back ratio (dB) ≥ 24
column Cross polar ratio, 0° (dB) ≥ 15
beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above
≥ 15
main beam (dB)
Radiation Gain (dBi) 20.7
parameters Horizontal 3 dB beam width (°) 65
NR
Front to back ratio (dB) ≥ 25
Broadcast
beam Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above
≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.7
NR 0° direction beam horizontal 3 dB beam width (°) 21
Service
beam 0° direction beam front to back ratio (dB) ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

416
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Mechanical Properties 68

(85)
Antenna dimensions (H x W x D) (mm) 1509 x 499 x 206
Packing dimensions (H x W x D) (mm) 1770 x 555 x 245
Antenna weight (kg) 35.6
Antenna packing weight (kg) 47.1 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65

1365
1509
14 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom
Frontal: 538 (at 150 km/h)
Wind load (N) Lateral: 309 (at 150 km/h)
Maximum: 710 (at 150 km/h)
Max. operational wind speed (km/h) 200

59
Survival wind speed (km/h) 250
Unit: mm

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–16° 3.1 kg 1 (Separate packing)

417
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Port and Array Layout

9–10 11–12 13–14


y2 y3
5–6 7–8 y1

15–16
1–2 3–4

p1 p1 p1 p1 b2
b1
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx……Lr1 \

3–4 Rr2 690–960 HWMxxxx……Rr2 \

5–6 Lb1 1427–2200 HWMxxxx…..Lb1 \

7–8 Rb2 1427–2200 HWMxxxx…..Rb2 \

9–10 Ly1 2490–2690 HWMxxxx…..Ly1 \

11–12 Cy2 1695–2690 HWMxxxx…..Cy2 \

13–14 Ry3 2490–2690 HWMxxxx…...Ry3 \

15–16 p1 3300–3800 HWMxxxx……..p1 HWXxxxx……..p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1. L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Notes:
Before installing the antenna, it is recommended to plan the use of antenna connectors based
on frequency bands in use currently and in the future. This is to avoid adjusting antenna
connector configuration when new frequency bands are deployed.

418
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties


Frequency range (MHz) 3300–3800
Electrical downtilt (°) 2–12
Horizontal 3 dB beam width (°) 30 65 90
Broadcast
Electrical azimuth (°) –15 to +15 0
beam
Electrical azimuth step(°) 1 /

419
Product Product
List Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-
3800)-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-Port
2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs – 1.5 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2200 MHz


(Lr1 / Rr2) (Cy2) (Lb1/Rb2)

Single column 65° Broadcast


2490–2690 MHz (3300–3800 MHz) (3300–3800 MHz)
(Ly1/Ry3)

Service 0° 5G NR Broadcast
(3300–3800 MHz) (3300–3800 MHz)

420
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (2490–2690)
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2)
Frequency range (MHz) (Ly1/Ry4)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.0 15.2 15.4 15.5 16.6 17.1 17.9
Gain (dBi)
Over all tilts 14.9±0.5 15.1±0.5 15.3±0.5 15.4±0.5 16.5±0.8 17.0±0.6 17.9±0.6
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 69±6 67±5 65±5 68±6 65±6 58±6
Vertical 3 dB beam width (°) 11.0±0.9 10.0±0.8 9.4±0.6 8.9±0.6 7.8±0.6 7.2±0.6 5.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.43 –1.15±0.20 –1.20±0.25 –1.30±0.25
Efficiency average (%) 72 77 76 74
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.5
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.7±0.5 18.4±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 69±6 66±6 61±6 58±7
Vertical 3 dB beam width (°) 9.4±0.7 7.8±0.7 7.0±0.6 6.2±0.5 5.5±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

421
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

General Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45° , -45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.50±0.30 –1.95±0.30
Efficiency average (%) 71 64
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
Calibration 0.7 0.9
ports (dB)
and
electrical Max. phase tolerance from calibration port to input ports (°) 6 8
parameters Ports VSWR 1.5 1.5
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

* Max. effective power whole antenna: 2000 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 63
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

422
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

5G NR Electrical Properties
2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 15 ≥ 15
beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 16 ≥ 15
beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 18
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 469 x 206
Packing dimensions (H x W x D) (mm) 2365 x 555 x 255

(605)
Antenna weight (kg) 44.7
Antenna packing weight (kg) 60.5 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
2099

Operational temperature (℃) –40 to +65


16 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
1435

Connector position Bottom


Frontal: 597 (at 150 km/h)
Wind load (N) Lateral: 458 (at 150 km/h)
Maximum: 781 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
59

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm
Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

423
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

424
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

Port and Array Layout

9–10 11–12 13–14 15–16


y1 y4

5–6 17–18 7–8 b1 y2 y3 b2

1–2 3–4
p1 p1 p1 p1
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx………Lr1 \
3–4 Rr2 690–960 HWMxxxx………Rr2 \
5–6 Lb1 1695–2200 HWMxxxx……..Lb1 \
7–8 Rb2 1695–2200 HWMxxxx……..Rb2 \
9–10 Ly1 2490–2690 HWMxxxx………Ly1 \
11–12 CLy2 1427–2690 HWMxxxx……CLy2 \
13–14 CRy3 1427–2690 HWMxxxx…...CRy3 \
15–16 Ry4 2490–2690 HWMxxxx….....Ry4 \
17–18 p1 2300–3800 HWMxxxx..……..p1 HWXxxxx……p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

425
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (Ly1/Ry4)

Single column 65° Broadcast


(2300–3800 MHz) (2300–3800 MHz)

426
Product Product
List Category
A124522R01v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x15.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.0 m

Service 0° 5G NR Broadcast
(2300–3800 MHz) (2300–3800 MHz)

Multi-Beam –30° Multi-Beam +30°


(2300–2690 MHz) (2300–2690 MHz)

427
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

Antenna Specifications
Electrical Properties
2 x (2490–2690)
2 x (690–960) (Lr1/Rr2) 2 x (1695–2200) (Lb1/Rb2)
Frequency range (MHz) (Ly1/Ry4)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.6 16.0 16.2 16.3 16.6 17.1 17.9
Gain (dBi)
Over all tilts 15.5±0.5 15.9±0.5 16.1±0.5 16.2±0.5 16.5±0.8 17.0±0.6 17.9±0.6
Side lobe suppression for first side
> 16 > 15 > 15 > 16 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 67±5 66±5 62±5 68±6 66±6 58±6
Vertical 3 dB beam width (°) 8.7±0.7 8.0±0.6 7.5±0.5 7.1±0.4 7.7±0.5 7.0±0.6 5.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.60 –1.15±0.30 –1.20±0.30 –1.30±0.30
Efficiency average (%) 69 77 76 74
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.5
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.7±0.5 18.4±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 69±6 66±6 61±6 58±7
Vertical 3 dB beam width (°) 9.5±0.7 7.8±0.7 7.2±0.6 6.4±0.5 5.6±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

428
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

General Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45° , -45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.45±0.30 –1.85±0.30
Efficiency average (%) 72 65
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
Calibration 0.7 0.9
ports (dB)
and
electrical Max. phase tolerance from calibration port to input ports (°) 6 8
parameters Ports VSWR 1.5 1.5
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

* Max. effective power whole antenna: 2000 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 63
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 18
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 19 /

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

429
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

5G NR Electrical Properties
2300–3800 (p1)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.8
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 25 ≥ 25
column Cross polar ratio, 0° (dB) ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 15 ≥ 15
beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 16 ≥ 15
beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 18
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 2550 x 469 x 206


Packing dimensions (H x W x D) (mm) 2825 x 555 x 255

(693)
Antenna weight (kg) 49.7
Antenna packing weight (kg) 67.5 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
1782
2550

16 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom
Frontal: 725 (at 150 km/h)
Wind load (N) Lateral: 556 (at 150 km/h)
Maximum: 949 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene


75

Accessories Unit: mm

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

430
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

431
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

Port and Array Layout

9–10 11–12 13–14 15–16


y1 y4

5–6 17–18 7–8 b1 y2 y3 b2

1–2 3–4
p1 p1 p1 p1
r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx………Lr1 \
3–4 Rr2 690–960 HWMxxxx………Rr2 \
5–6 Lb1 1695–2200 HWMxxxx……..Lb1 \
7–8 Rb2 1695–2200 HWMxxxx……..Rb2 \
9–10 Ly1 2490–2690 HWMxxxx………Ly1 \
11–12 CLy2 1427–2690 HWMxxxx……CLy2 \
13–14 CRy3 1427–2690 HWMxxxx…...CRy3 \
15–16 Ry4 2490–2690 HWMxxxx….....Ry4 \
17–18 p1 2300–3800 HWMxxxx..……..p1 HWXxxxx……p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

432
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (Ly1/Ry4)

Single column 65° Broadcast


(2300–3800 MHz) (2300–3800 MHz)

433
Product Product
List Category
A124522R02v06
D12X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800
-9x65-2x16.5i/2x18i/2x17i/2x17.5i/22i-9xM-R EasyRET 24-Port 2L6H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 9 Integrated RCUs – 2.6 m

Service 0° 5G NR Broadcast
(2300–3800 MHz) (2300–3800 MHz)

Multi-Beam –30° Multi-Beam +30°


(2300–2690 MHz) (2300–2690 MHz)

434
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.0 15.4 15.4 15.5 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 14.9±0.5 15.1±0.5 15.3±0.5 15.4±0.5 16.7±0.7 17.3±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16 > 18 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 69±6 68±5 65±5 66±6 65±6 62±5 58±6
Vertical 3 dB beam width (°) 10.7±0.9 9.8±0.8 9.2±0.6 8.7±0.6 7.8±0.6 7.2±0.6 6.4±0.5 5.6±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 22 > 23 > 24 > 24 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.43 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 72 81 80 77 76
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.5
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.7±0.5 18.4±0.5
Side lobe suppression for first side
> 16 > 17 > 18 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 69±6 65±6 60±6 58±7
Vertical 3 dB beam width (°) 9.4±0.7 7.8±0.7 7.2±0.6 6.4±0.5 5.6±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.25 –1.15±0.2 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

435
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

General Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.50±0.30 –1.95±0.30
Efficiency average (%) 71 64
Max. power per input (W)* 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input ports
0.7 0.9
Calibration (dB)
and Max. phase tolerance from calibration port to input ports (°) 6 8
electrical
Ports VSWR 1.5 1.5
parameters
Intraband Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
isolation Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Interband isolation between Lp1 and Rp2 ≥ 22 ≥ 26

* Max. effective power whole antenna: 2200 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 62
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 17
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 18 /
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

436
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

5G NR Electrical Properties
2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 15 ≥ 15
beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
NR Horizontal 3 dB beam width (°) 65 65
Broadcast Front to back ratio (dB) ≥ 26 ≥ 30
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
≥ 16 ≥ 15
beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 17

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206
Packing dimensions (H x W x D) (mm) 2360 x 560 x 260

(605)
Antenna weight (kg) 46.0
Antenna packing weight (kg) 62.7 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65
2099

12 x 4.3-10 Female
Connector
2 x MQ4 Male + 2 x MQ5 Male
1435

Connector position Bottom


Frontal: 749 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 988 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
59

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

437
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step (°) 1 / 1 /

438
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

Port and Array Layout

5–6 7–8 9–10 11–12

13–14 15–16 y1 y2 y3 y4

1–2 3–4

p1 p1 p1 p1 p2 p2 p2 p2

r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx………Lr1 \
3–4 Rr2 690–960 HWMxxxx………Rr2 \
5–6 Ly1 1695–2690 HWMxxxx………Ly1 \
7–8 CLy2 1427–2690 HWMxxxx……CLy2 \
9–10 CRy3 1427–2690 HWMxxxx…...CRy3 \
11–12 Ry4 1695–2690 HWMxxxx….....Ry4 \
13–14 Lp1 2300–3800 HWMxxxx……..Lp1 HWXxxxx……Lp1
15–16 Rp2 2300–3800 HWMxxxx……..Rp2 HWXxxxx……Rp2

L CL CR R L CL CR R

MQ5-1 p1.R+ MQ5-1 p2.R+

MQ4-1 p1.R– MQ4-1 p2.R–

MQ5-2 p1.CR+ MQ5-2 p2.CR+

MQ4-2 p1.CR– MQ4-2 p2.CR–

MQ5-3 p1.CL+ MQ5-3 p2.CL+

MQ4-3 p1.CL– MQ4-3 p2.CL–

MQ5-4 p1.L+ MQ5-4 p2.L+

MQ4-4 p1.L– MQ4-4 p2.L–

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

439
Product Product
List Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H FDD
/2x(2.3–3.8 GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz


(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)

Single column 65° Broadcast Service 0°


(2300–3800 MHz) (2300–3800 MHz) (2300–3800 MHz)

5G NR Broadcast Multi-Beam –30° Multi-Beam +30°


(2300–3800 MHz) (2300–2690 MHz) (2300–2690 MHz)

440
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

Antenna Specifications

Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 15.7 16.0 16.1 16.2 17.0 17.5 17.8 18.3
Gain (dBi)
Over all tilts 15.6±0.5 15.9±0.5 16.0±0.5 16.0±0.5 16.9±0.7 17.4±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first side
> 17 > 16 > 16 > 16 > 16 > 15 > 15 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±6 68±5 65±5 63±5 66±6 63±6 62±6 58±6
Vertical 3 dB beam width (°) 8.7±0.7 7.9±0.5 7.6±0.5 7.2±0.5 7.2±0.8 6.5±0.8 5.7±0.6 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio,±30° (dB) > 22 > 22 > 22 > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
– – – –
Efficiency (dB) –1.60
0.90±0.20 0.95±0.20 1.15±0.20 1.20±0.25
Efficiency average (%) 69 81 80 77 76
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 17.0 17.5 17.9 18.5
Gain (dBi)
Over all tilts 15.2±0.6 16.9±0.5 17.4±0.5 17.8±0.5 18.4±0.5
Side lobe suppression for first side
> 15 > 16 > 15 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 67±6 65±6 62±5 58±7
Vertical 3 dB beam width (°) 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio,±30° (dB) > 25 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.2 –1.20±0.25
Efficiency average (%) 82 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

441
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

General Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.50±0.30 –1.95±0.30
Efficiency average (%) 71 64
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
0.7 0.9
Calibration ports (dB)
and Max. phase tolerance from calibration port to input ports (°) 6 8
electrical
Ports VSWR 1.5 1.5
parameters
Intraband Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
isolation Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Interband isolation between Lp1 and Rp2 ≥ 22 ≥ 26

* Max. effective power whole antenna: 2200 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.5
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 62
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.5
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 25 17
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 17
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross polar ratio at boresight (dB) ≥ 18 /

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

442
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

5G NR Electrical Properties
2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.5
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
Horizontal 3 dB beam width (°) 65 65
NR
Front to back ratio (dB) ≥ 26 ≥ 30
Broadcast
beam Vertical 3 dB beam width (°) 8.0 5.5
Side lobe suppression for first side lobe above
≥ 16 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 25 17
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 18 ≥ 17

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 499 x 206

(690)
Packing dimensions (H x W x D) (mm) 2810 x 555 x 250
Antenna weight (kg) 50.0
Antenna packing weight (kg) 66.5 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
2550

Operational temperature (℃) –40 to +65


12 x 4.3-10 Female
1785

Connector
2 x MQ4 Male + 2 x MQ5 Male
Connector position Bottom
Frontal: 910 (at 150 km/h)
Wind load (N) Lateral: 523 (at 150 km/h)
Maximum: 1200 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
75

Unit: mm
*GFRPP: Glass Fiber Reinforced Polypropylene

443
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
4 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

444
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

Port and Array Layout

5–6 7–8 9–10 11–12

13–14 15–16 y1 y2 y3 y4

1–2 3–4

p1 p1 p1 p1 p2 p2 p2 p2

r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx…….Lr1 \

3–4 Rr2 690–960 HWMxxxx…….Rr2 \

5–6 Ly1 1695–2690 HWMxxxx…….Ly1 \

7–8 CLy2 1427–2690 HWMxxxx…..CLy2 \

9–10 CRy3 1427–2690 HWMxxxx….CRy3 \

11–12 Ry4 1695–2690 HWMxxxx……Ry4 \

13–14 Lp1 2300–3800 HWMxxxx…...Lp1 HWXxxxx…...Lp1

15–16 Rp2 2300–3800 HWMxxxx…..Rp2 HWXxxxx…...Rp2

L CL CR R L CL CR R

MQ5-1 p1.R+ MQ5-1 p2.R+

MQ4-1 p1.R- MQ4-1 p2.R-

MQ5-2 p1.CR+ MQ5-2 p2.CR+

MQ4-2 p1.CR- MQ4-2 p2.CR-

MQ5-3 p1.CL+ MQ5-3 p2.CL+

MQ4-3 p1.CL- MQ4-3 p2.CL-

MQ5-4 p1.L+ MQ5-4 p2.L+

MQ4-4 p1.L- MQ4-4 p2.L-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

445
Product Product
List Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-
3800-8x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-Port 2L4H
FDD/2x(2.3-3.8GHz) 8T8R TDD Antenna with 8 Integrated RCUs – 2.6 m

Pattern Sample for Reference

690–960 MHz 1695–2690 MHz


1427–2690 MHz
(Lr1/Rr2) (Ly1/Ry4)
(CLy2/CRy3)

Single column 65° Broadcast Service 0°


(2300–3800 MHz) (2300–3800 MHz) (2300–3800 MHz)

5G NR Broadcast Multi-Beam -30° Multi-Beam +30°


(2300–3800 MHz) (2300–2690 MHz) (2300–2690 MHz)

446
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.0 15.2 15.4 15.5
Gain (dBi)
Over all tilts 14.9±0.5 15.1±0.5 15.3±0.5 15.4±0.5
Side lobe suppression for first
> 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 68±6 66±6
Vertical 3 dB beam width (°) 10.8±0.8 9.8±0.8 9.4±0.6 8.9±0.6
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 23 > 23 > 24 > 22
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –1.43
Efficiency average (%) 72
Max. effective power per port
400 (at 50℃ ambient temperature)*
(W)
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2200) 2 x (2490–
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz) (Lb1/Rb2) 2690)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 (Ly1/Ry4)

Polarization +45°, –45° +45°, –45°


2–12, continuously adjustable,
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
each band separately
At mid tilt 15.3 16.8 17.4 17.9 18.5 16.6 17.1 17.8
Gain (dBi)
Over all tilts 15.2±0.7 16.7±0.7 17.3±0.5 17.8±0.5 18.4±0.5 16.5±0.8 17.0±0.6 17.7±0.6
Side lobe suppression for first
16 16 16 15 16 15 16 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 68±6 65±6 60±6 58±7 68±6 64±6 58±6
Vertical 3 dB beam width (°) 9.4±0.7 7.8±0.7 6.9±0.6 6.2±0.5 5.5±0.5 7.8±0.6 7.2±0.6 5.7±0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 26 > 26 > 26 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.85±0.15 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25 –1.15±0.20 –1.20±0.25 –1.30±0.25
Efficiency average (%) 82 81 80 77 76 77 76 74
Max. effective power per port 250 (at 50℃ ambient
250 (at 50℃ ambient temperature)*
(W) temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

447
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

General Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Polarization +45°, –45°
2–12, continuously adjustable, each band
Electrical downtilt (°)
separately
General Electrical downtilt tolerance (°) ±1
parameters
Efficiency (dB) –1.50±0.30 –1.95±0.30
Efficiency average (%) 71 64
Max. power per input (W)* 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each
–26±2 –26±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
0.7 0.9
Calibration ports (dB)
and Max. phase tolerance from calibration port to input ports (°) 6 8
electrical
Ports VSWR 1.5 1.5
parameters
Intraband Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
isolation Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Interband isolation between Lp1 and Rp2 ≥ 22 ≥ 26
* Max. effective power whole antenna: 2350 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 16.2 17.0
Horizontal 3 dB beam width (°) 65 62
Radiation 65° Front to back ratio (dB) ≥ 26 ≥ 25
parameters Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 16
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
Service 0° direction beam horizontal 3 dB beam width (°) 26 18
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 17
Gain (dBi) 19.4 /
Soft split Horizontal 3 dB beam width (°) 31 /
multi-
beam Front to back ratio (dB) ≥ 30 /
Cross ploar ratio at boresight (dB) ≥ 18 /

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

448
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

5G NR Electrical Properties
2 x (2300–3800) (Lp1/Rp2)
Frequency range (MHz)
2300–2690 3300–3800
Gain (dBi) 15.0 16.5
Horizontal 3 dB beam width (°) 90 70
Single Front to back ratio (dB) ≥ 22 ≥ 22
column Cross polar ratio, 0° (dB) ≥ 16 ≥ 15
beam
Vertical 3 dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Radiation
Gain (dBi) 19.9 21.7
parameters
NR Horizontal 3 dB beam width (°) 65 65
Broadcast Front to back ratio (dB) ≥ 26 ≥ 30
beam 8.0 5.6
Vertical 3 dB beam width (°)
Side lobe suppression for first side lobe above
≥ 16 ≥ 15
main beam (dB)
0° direction beam gain (dBi) 20.2 22.0
NR 0° direction beam horizontal 3 dB beam width (°) 26 18
Service
beam 0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio (dB) ≥ 18 ≥ 17
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206

(605)
Packing dimensions (H x W x D) (mm) 2360x 560 x 260
Antenna weight (kg) 49.2
Antenna packing weight (kg) 65.9 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
2099

Operational temperature (℃) –40 to +65


16 x 4.3-10 Female
Connector
1435

2x MQ4 Male+2x MQ5 Male


Connector position Bottom
Frontal: 749 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 988 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
59

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm
Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

449
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

Windload Polar Chart

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

TDD LTE EasyBeam Properties


Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadcast
beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

450
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

Port and Array Layout

9–10 11–12 15–16


y1 y4
5–6 7–8

b1 y2 y3 b2
17–18 19–20
13–14

1–2 3–4
p1 p1 p1 p1 p2 p2 p2 p2

r1 r2

Port Array Freq(MHz) RET S/N RAE S/N


1–2 Lr1 690–960 HWMxxxx………Lr1 \
3–4 Rr2 690–960 HWMxxxx………Rr2 \
5–6 Lb1 1695–2200 HWMxxxx……..Lb1 \
7–8 Rb2 1695–2200 HWMxxxx……..Rb2 \
9–10 Ly1 2490–2690 HWMxxxx………Ly1 \
11–12 CLy2 1427–2690 HWMxxxx……CLy2 \
13–14 CRy3 1427–2690 HWMxxxx…...CRy3 \
15–16 Ry4 2490–2690 HWMxxxx….....Ry4 \
17–18 Lp1 2300–3800 HWMxxxx……..Lp1 HWXxxxx……Lp1
19–20 Rp2 2300–3800 HWMxxxx……..Rp2 HWXxxxx……Rp2

L CL CR R L CL CR R

MQ5-1 p1.R+ MQ5-1 p2.R+

MQ4-1 p1.R- MQ4-1 p2.R-

MQ5-2 p1.CR+ MQ5-2 p2.CR+

MQ4-2 p1.CR- MQ4-2 p2.CR-

MQ5-3 p1.CL+ MQ5-3 p2.CL+

MQ4-3 p1.CL- MQ4-3 p2.CL-

MQ5-4 p1.L+ MQ5-4 p2.L+

MQ4-4 p1.L- MQ4-4 p2.L-

Physical array & port mapping according to AISG naming convention:


Left - Center Left - Center Right - Right (seen from front of antenna)

451
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

Pattern Sample for Reference

690–960 MHz 1427–2690 MHz


(Lr1/Rr2) (CLy2/CRy3)

1695–2200 MHz 2490–2690 MHz


(Lb1/Rb2) (Ly1/Ry4)

Single column 65° Broadcast


(2300–3800 MHz) (2300–3800 MHz)

452
Product Product
List Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET 32-Port 2L6H
FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with 10 Integrated RCUs – 2.0 m

Service 0° 5G NR Broadcast
(2300–3800 MHz) (2300–3800 MHz)

Multi-Beam –30° Multi-Beam +30°


(2300–2690 MHz) (2300–2690 MHz)

453
Product Product
List Category
B. Passive Antenna
TDD Antenna

Frequency Range 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Page
(MHz) Beam Width (o) Downtilt (o)

1 x MQ4 Male + 1 x
2300-2690 90 16 2-12
MQ5 Male
1445 x 299 x 109 ATD4516R5v07 455

1 x MQ4 Male + 1 x
3300-3800 75 15.5 2–12
MQ5 Male
1100 x 259 x 135 ATD4516R8v07 460

3300-3800 75 15.5 2–12 9 x 4.3-10 Female 1100 x 259 x 135 ATD4516R8v08 465

2300-2690 17 2–12 2 x MQ4 Male + 2 x


3300-3800
65/65
16 2-12 MQ5 Male
1499 x 469 x 206 *ATD4516R9v07 470

4x2545-2645 21 5–15
3 x MQ4 Male + 3 x
4x3400-3600 3x65 22 5–15
MQ5 Male
Φ330 x 982 *CTD4522R01v06 475
4x3600-5000 22 5-15

SDA

Frequency Range 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Page
(MHz) Beam Width (o) Downtilt (o)

1 x MQ4 Male +
2300-2690 18|65 22|17.5 2-12
1 x MQ5 Male
1509 x 499 x 206 A04040PD00v06 478

2300-2400 18|65 21.5|16.5 2–12 2 x MQ4 Male +


2496-2690 18|65 22|17 2–12 2 x MQ5 Male
1509 x 499 x 206 A08080PD00v06 482

* Preliminary Issue

454
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R

Antenna Specifications
General Electrical Properties
Frequency range (MHz) 2300–2400 (y1) 2496–2690 (y1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Maximum effective power per port (W) 60 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each antenna port (dB) –26±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.7
Max. phase tolerance from calibration port to input ports (°) 5
Calibration Ports VSWR 1.5
and
electrical ≥ 20 @ 2°Electrical downtilt;
parameters Co-polarization isolation between ports (dB) ≥ 25 @ 3° - 6° Electrical downtilt;
≥ 28 @ 7° - 12°Electrical downtilt
≥ 25 @ 2°Electrical downtilt;
Cross-polarization isolation between ports (dB) ≥ 28 @ 3° - 6°Electrical downtilt;
≥ 30 @ 7° - 12°Electrical downtilt
* Maximum effective power whole antenna: 480W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


Frequency range (MHz) 2300–2400 (y1) 2496–2690 (y1)
Gain (dBi) 16 17
Horizontal 3 dB beam width (°) 90 75
Front to back ratio (dB) ≥ 28 ≥ 27
Single column
beam Cross polar ratio, 0° (dB) ≥ 20 ≥ 20
Vertical 3 dB beam width (°) 6.5 5.7
Side lobe suppression for first side lobe above
≥ 18 ≥ 18
main beam (dB)
Gain (dBi) 17.5 18
Horizontal 3 dB beam width (°) 65 65
Front to back ratio (dB) ≥ 30 ≥ 30
Radiation 65° Broadcast
beam Cross polar ratio, 0° (dB) ≥ 22 ≥ 22
parameters
Vertical 3 dB beam width (°) 6.5 5.7
Side lobe suppression for first side lobe above
≥ 18 ≥ 18
main beam (dB)
0° direct beam gain (dBi) 21 22
0° direction beam horizontal 3 dB beam width (°) 25.5 23
Service beam
0° direction beam cross polar ratio, 0° (dB) ≥ 22 ≥ 22
0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
Gain (dBi) 20.5 21.5

Soft split Horizontal 3 dB beam width (°) 30 27


multi-beam Front to back ratio (dB) ≥ 30 ≥ 30
Cross polar ratio at boresight (dB) ≥ 18 ≥ 18

455
Product Product
List Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R

5G NR Electrical Properties
Frequency range (MHz) 2300–2400 (y1) 2496–2690 (y1)
Gain (dBi) 16 17
Horizontal 3 dB beam width (°) 90 75
Front to back ratio (dB) ≥ 28 ≥ 27
Single column
beam Cross polar ratio, 0° (dB) ≥ 20 ≥ 20
Vertical 3 dB beam width (°) 6.5 5.7
Side lobe suppression for first side lobe above
≥ 18 ≥ 18
main beam (dB)

Radiation Gain (dBi) 20.8 21.8


parameters Horizontal 3 dB beam width (°) 65 65
NR Broadcast Front to back ratio (dB) ≥ 30 ≥ 30
beam
Vertical 3 dB beam width (°) 6.5 5.7
Side lobe suppression for first side lobe above main
≥ 18 ≥ 18
beam (dB)
0° direct beam gain (dBi) 21 22
0° direction beam horizontal 3 dB beam width (°) 25.5 23
NR Service beam
0° direction beam front to back ratio (dB) ≥ 30 ≥ 30
0° direction beam cross polar ratio, 0° (dB) ≥ 22 ≥ 22

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties 68

(58)
Distance between columns (mm) 62
Antenna dimensions (H x W x D) (mm) 1445 x 299 x 109
Packing dimensions (H x W x D) (mm) 1770 x 350 x 180
Antenna weight (kg) 16.0
Antenna packing weight (kg) 23.2 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1331
1445

Operational temperature (℃) –40 to +65


Frontal: 400 (at 150 km/h)
Wind load (N) Lateral: 152 (at 150 km/h)
Maximum: 467 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom
56

Unit: mm

456
Product Product
List Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

y1 y1 y1 y1

L CL CR R

MQ5-4 y1.L+ MQ5-3 y1.CL+ MQ5-2 y1. CR+ MQ5-1 y1.R+

MQ4-4 y1.L- MQ4-3 y1. CL- MQ4-2 y1. CR- MQ4-1 y1.R-

Port Array Freq(MHz) RET S/N RAE S/N


1–2 y1 2300–2690 HWMxxx….y1 HWXxxx…..y1

457
Product Product
List Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R

Pattern Sample for Reference

Single column 65° Broadcast

Service 0° NR Broadcast

Multi-Beam –30° Multi-Beam +30°

458
Product Product
List Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) DC 10–30
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
2 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used

Lightning protection (kA) 10 (8/20 μs)

RAE Properties
RAE type Integrated RAE, manages antenna information
RAE protocols AISG-ES-RAE V2.1.0

EasyBeam Properties
Frequency range (MHz) 2300–2400 2496–2690
Electrical downtilt (°) 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadca
st beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

459
Product Product
List Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R

Antenna Specifications

General Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each antenna port (dB) –26±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.9
Calibration Max. phase tolerance from calibration port to input ports (°) 7
and electrical
parameters Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 25

* Max. effective power whole antenna: 400W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.5
Horizontal 3 dB beam width (°) 78

Single Front to back ratio (dB) ≥ 23


column Cross polar ratio, 0° (dB) ≥ 18
beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
Gain (dBi) 17
Horizontal 3 dB beam width (°) 65

65° Front to back ratio (dB) ≥ 25


Radiation Broadcast Cross polar ratio, 0° (dB) ≥ 22
parameters beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
0° direction beam gain (dBi) 21

Service 0° direction beam horizontal 3 dB beam width (°) 26


beam 0° direction beam front to back ratio (dB) ≥ 28
0° direction beam cross polar ratio, 0° (dB) ≥ 22
Gain (dBi) 20

Soft split Horizontal 3 dB beam width (°) 30


multi-beam Front to back ratio (dB) ≥ 25
Cross polar ratio at boresight (dB) ≥ 18

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

460
Product Product
List Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R

5G NR Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.5
Horizontal 3 dB beam width (°) 78
Front to back ratio (dB) ≥ 23
Single column beam Cross polar ratio, 0° (dB) ≥ 18
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main beam
≥ 15
(dB)
Radiation Gain (dBi) 20.7
parameters Horizontal 3 dB beam width (°) 65
Front to back ratio (dB) ≥ 25
NR Broadcast beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
0° direction beam gain (dBi) 21
0° direction beam horizontal 3 dB beam width (°) 26
NR Service beam
0° direction beam front to back ratio (dB) ≥ 28
0° direction beam cross polar ratio, 0° (dB) ≥ 22

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties
68
Distance between columns (mm) 43
Antenna dimensions (H x W x D) (mm) 1100 x 259 x 135

(281)
Packing dimensions (H x W x D) (mm) 1290 x 340 x 205
Antenna weight (kg) 13.0
Antenna packing weight (kg) 20.4 (Including clamps)
Radome material Fiberglass
Radome colour Light grey
1100

Operational temperature (℃) –40 to +65


770

Connector 1 x MQ4 Male + 1 x MQ5 Male


Connector position Bottom
Frontal: 301 (at 150 km/h)
Wind load (N) Lateral: 161 (at 150 km/h)
Maximum: 345 (at 150 km/h)
Max. operational wind speed (km/h) 200
49

Survival wind speed (km/h) 250

Unit: mm

461
Product Product
List Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Pattern Sample for Reference

Single column 65° Broadcast Service 0°

5G NR Broadcast Multi-Beam –30° Multi-Beam +30°

462
Product Product
List Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R

Port and Array Layout

p1 p1 p1 p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

Port Array Freq(MHz) RET S/N RAE S/N


1–2 p1 3300-3800 HWMxxx….p1 HWXxxx…...p1

463
Product Product
List Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 2 (when the motor does not work, 12 V)
Power consumption (W)
< 13 (when the motor is working, 12 V)
Adjustment time (full range) (s) Typ. 60
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE, manages antenna information
RAE protocols AISG-ES-RAE V2.1.0

EasyBeam Properties
Frequency range (MHz) 3300–3800
Electrical downtilt (°) 2–12
Horizontal 3 dB beam
30 65 90
width (°)
Broadca
st beam Electrical azimuth (°) –15 to +15 0
Electrical azimuth step(°) 1 /

464
Product Product
List Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R

Antenna Specifications
General Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each antenna port (dB) –26±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.9
Calibration Max. phase tolerance from calibration port to input ports (°) 7
and electrical
parameters Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 25
* Max. effective power whole antenna: 400W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.5
Horizontal 3 dB beam width (°) 78

Single Front to back ratio (dB) ≥ 23


column Cross polar ratio, 0° (dB) ≥ 18
beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
Gain (dBi) 17
Horizontal 3 dB beam width (°) 65

65° Front to back ratio (dB) ≥ 25


Radiation Broadcast Cross polar ratio, 0° (dB) ≥ 22
parameters beam
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
0° direction beam gain (dBi) 21

Service 0° direction beam horizontal 3 dB beam width (°) 26


beam 0° direction beam front to back ratio (dB) ≥ 28
0° direction beam cross polar ratio, 0° (dB) ≥ 22
Gain (dBi) 20

Soft split Horizontal 3 dB beam width (°) 30


multi-beam Front to back ratio (dB) ≥ 25
Cross polar ratio at boresight (dB) ≥ 18

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

465
Product Product
List Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R

5G NR Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 15.5
Horizontal 3 dB beam width (°) 78
Front to back ratio (dB) ≥ 23
Single column beam
Cross polar ratio, 0° (dB) ≥ 18
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main beam (dB) ≥ 15
Radiation Gain (dBi) 20.7
parameters NR Broadcast beam Horizontal 3 dB beam width (°) 65
(PBCH/PSCH/SSCH
Front to back ratio (dB) ≥ 25
with HUAWEI gNodeB)
Vertical 3 dB beam width (°) 5.5
Side lobe suppression for first side lobe above main beam (dB) ≥ 15
0° direction beam gain (dBi) 21
0° direction beam horizontal 3 dB beam width (°) 26
NR Service beam
0° direction beam front to back ratio (dB) ≥ 28
0° direction beam cross polar ratio, 0° (dB) ≥ 22

Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties
68
Distance between columns (mm) 43
Antenna dimensions (H x W x D) (mm) 1100 x 259 x 135

(281)
Packing dimensions (H x W x D) (mm) 1290 x 340 x 205
Antenna weight (kg) 13.3
Antenna packing weight (kg) 20.7 (Including clamps)
Radome material Fiberglass 1100

Radome colour Light grey


Operational temperature (℃) –40 to +65
770

Connector 9 x 4.3-10 Female


Connector position Bottom
Frontal: 301 (at 150 km/h)
Wind load (N) Lateral: 161 (at 150 km/h)
Maximum: 345 (at 150 km/h)
Max. operational wind speed (km/h) 200
49

Survival wind speed (km/h) 250


Unit: mm

466
Product Product
List Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R

Windload Polar Chart

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-B ASMC00013 3.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-B ASMDT0B01 Mechanical downtilt: 0–16° 1.3 kg 1 (Separate packing)

Port and Array Layout

p1.L p1.CL p1.CR p1.R

Port Array Freq(MHz) RET S/N RAE S/N


1–8 p1 3300–3800 HWMxxx….p1 HWXxxx….p1

467
Product Product
List Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R

Pattern Sample for Reference

Single column 65° Broadcast

Service 0° 5G NR Broadcast

Multi-Beam –30° Multi-Beam +30°

468
Product Product
List Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) DC 10–30
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 3.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE, manages antenna information
RAE protocols AISG-ES-RAE V2.1.0

EasyBeam Properties
Frequency range (MHz) 3300–3800
Electrical downtilt (°) 2–12
Horizontal 3 dB beam width (°) 30 65 90
Broadca
Electrical azimuth (°) –15 to +15 0
st beam
Electrical azimuth step(°) 1 /

469
Product Product
List Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

Preliminary Issue

Antenna Specifications
General Electrical Properties
Frequency range (MHz) 2300–2690 (y1) 3300–3800 (p1)

General Polarization +45°, –45° +45°, –45°


parameters Electrical downtilt (°) 2–12, continuously adjustable 2–12, continuously adjustable
Grounding DC grounding DC grounding
Coupling factor between calibration port and
–26±2 –26±2
each antenna port (dB)
Max. amplitude tolerance from calibration
0.7 0.9
port to input ports (dB)

Calibration Max. phase tolerance from calibration port to


5 7
and electrical input ports (°)
parameters
Ports VSWR 1.5 1.5
Max. effective power per port (W) 25 25
Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

Beamforming Electrical Properties


Frequency range (MHz) 2300–2690 (y1) 3300–3800 (p1)
Horizontal 3 dB beam width (°) 90 75
Gain (dBi) 16 16.5

Single Vertical 3 dB beam width (°) 5.8 5.2


column Cross polar ratio (0°) (dB) ≥ 19 ≥ 17
beam
Side lobe suppression for first
≥ 15 ≥ 15
side lobe above main beam (dB)
Front to back ratio (dB) ≥ 25 ≥ 25
Horizontal 3 dB beam width (°) 65 65
Gain (dBi) 17.5 17.5
Gain roll-off at sector edge (dB) 12 12
Radiation 65°
Vertical 3 dB beam width (°) 5.8 5.2
parameters Broadcast
beam Cross polar ratio, 0° (dB) 17 19
Front to back ratio (dB) ≥ 28 ≥ 25
Side lobe suppression for first
≥ 15 ≥ 15
side lobe above main beam (dB)
0° direction beam gain (dBi) 21.5 21
0° direction beam horizontal 3
23 24
dB beam width (°)
0° direction beam horizontal side
Service 12 12
lobe suppression (dB)
beam
0° direction beam cross polar
22 19
ratio, 0° (dB)
0° direction beam front to back
≥ 30 ≥ 30
ratio (dB)

470
Product Product
List Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

Preliminary Issue

Soft Split Electrical Properties


Frequency range (MHz) 2300–2690 (y1)
Horizontal 3 dB beam width (°) 28
Gain (dBi) 20.5
Radiation
parameters Vertical 3 dB beam width (°) 5.8
Multi-beam
Front to back ratio (dB) ≥ 30
Side lobe suppression for first
≥ 15
side lobe above main beam (dB)

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

Mechanical Properties 68

(59)
Distance between columns (mm) 43/62
Antenna dimensions (H x W x D) (mm) 1499 x 469 x 206
Packing dimensions (H x W x D) (mm) 1870 x 535 x 285
Antenna weight (kg) 31.5
Antenna packing weight (kg) 49.5 (Including clamps)
Radome material Fiberglass

1499
1383
Radome colour Light grey
Operational temperature (℃) –40 to +65
Connector 18 x N Female
Connector position Bottom
Frontal: 426 (at 150 km/h)
Wind load (N) Lateral: 327 (at 150 km/h)
Maximum: 558 (at 150 km/h)
Max. operational wind speed (km/h) 200

57
Survival wind speed (km/h) 250

Unit: mm
Windload Polar Chart

471
Product Product
List Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

Preliminary Issue

Accessories

Item Model Description Weight Units per antenna


2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–16° 3.1 kg 1 (Separate packing)

Port and Array Layout

1–8 1–8

y1 y1 y1 y1 p1 p1 p1 p1

L CL CR R L CL CR R

N-1 y1.R+ N-1 p1.R+

N-5 y1.R- N-5 p1.R-

N-2 y1.CR+ N-2 p1.CR+

N-6 y1.CR- N-6 p1.CR-

N-3 y1.CL+ N-3 p1.CL+

N-7 y1.CL- N-7 p1.CL-

N-4 y1.L+ N-4 p1.L+

N-8 y1.L- N-8 p1.L-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

Port Array Freq(MHz) RET S/N RAE S/N


1–8 y1 2300–2690 HWMxxx….y1 HWXxxx…..y1

1–8 p1 3300–3800 HWMxxx….p1 HWXxxx…..p1

472
Product Product
List Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

Preliminary Issue

Pattern Sample for Reference

Single column Single column


(2300–2690 MHz) (3300–3800 MHz)

65° Broadcast 65° Broadcast


(2300–2690 MHz) (3300–3800 MHz)

Service 0° Service 0°
(2300–2690 MHz) (3300–3800 MHz)

473
Product Product
List Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

Preliminary Issue

Multi-Beam –30° Multi-Beam +30°


(2300–2690 MHz) (2300–2690 MHz)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

EasyBeam Properties
Frequency range (MHz) 2300–2690 3300–3800
Electrical downtilt (°) 2–12 2–12
Horizontal 3 dB beam
30 65 90 30 65 90
width (°)
Broadca
st beam Electrical azimuth (°) –15 to +15 0 –15 to +15 0
Electrical azimuth step(°) 1 / 1 /

474
Product Product
List Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i-
3xM-R EasyRET 24-Port 2.5-2.6 & 3.4-3.6 & 3.6-5.0 GHz 8T8R TDD
Antenna with 3 integrated RCUs – 1.0 m
Preliminary Issue

General Electrical Properties

Frequency range (MHz) 2545–2645 (y1) 3400–3600 (p1) 3600–5000 (p2)

Polarization +45°, –45°

General Electrical downtilt (°) 5–15, continuously adjustable, each band separately
parameters Electrical downtilt tolerance (°) ±1

Avg. power capacity (W)* 40

Impedance (Ω) 50

Grounding DC grounding

* Max. effective power whole antenna: 720 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


3600–5000 (p2)
Frequency range (MHz) 2545–2645 (y1) 3400–3600 (p1)
3600–4100 4500–5000

Gain (dBi) 16 16.3 16.5 16.8

Horizontal 3 dB beam width (°) 77 77 76 67

Front to back ratio (dB) ≥ 22 ≥ 22 ≥ 22 ≥ 22


Single
column Cross polar ratio, 0° (dB) ≥ 17 ≥ 15 ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 6.7 5.4 5 4
Side lobe suppression for
first side lobe above main ≥ 15 ≥ 15 ≥ 15 ≥ 15
beam (dB)
Gain (dBi) 16.5 16.7 16.8 16.7
Radiation
Horizontal 3 dB beam width (°) 65 65 65 65
parameters
Front to back ratio (dB) ≥ 22 ≥ 22 ≥ 22 ≥ 22
65°
Broadcast Cross polar ratio, 0° (dB) ≥ 17 ≥ 15 ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 6.7 5.4 5 4
Side lobe suppression for
first side lobe above main ≥ 15 ≥ 15 ≥ 15 ≥ 15
beam (dB)
0°direct beam gain (dBi) 21.3 22.3 22.3 22.6
0°direction beam horizontal
19.5 15 13.5 11
3 dB beam width (°)
Service
beam 0°direction beam front to
≥ 25 ≥ 25 ≥ 25 ≥ 25
back ratio (dB)
0°direction beam cross
≥ 17 ≥ 15 ≥ 15 ≥ 15
polar ratio (dB)

475
Product Product
List Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i-
3xM-R EasyRET 24-Port 2.5-2.6 & 3.4-3.6 & 3.6-5.0 GHz 8T8R TDD
Antenna with 3 integrated RCUs – 1.0 m
Preliminary Issue

5G NR Electrical Properties
3600–5000 (p2)
Frequency range (MHz) 2545–2645 (y1) 3400- 3600 (p1)
3600–4100 4500–5000
Gain (dBi) 16 16.3 16.5 16.8
Horizontal 3 dB beam width (°) 77 77 76 67
Front to back ratio (dB) ≥ 22 ≥ 22 ≥ 22 ≥ 22
Single
column Cross polar ratio (0°) (dB) ≥ 17 ≥ 15 ≥ 15 ≥ 15
beam
Vertical 3 dB beam width (°) 6.7 5.4 5 4
Side lobe suppression for first
side lobe above main beam ≥ 15 ≥ 15 ≥ 15 ≥ 15
(dB)
Gain (dBi) 21.1 22.1 22.1 22.4
Radiation
parameters Horizontal 3 dB beam width (°) 65 65 65 60
NR
Broadcast Front to back ratio (dB) ≥ 22 ≥ 22 ≥ 22 ≥ 22
beam Vertical 3 dB beam width (°) 6.7 5.4 5 4
Side lobe suppression for first
side lobe above main beam ≥ 15 ≥ 15 ≥ 15 ≥ 15
(dB)
0° direct beam gain (dBi) 21.3 22.3 22.3 22.6
0° direction beam horizontal
19.5 15 13.5 11
NR 3 dB beam width (°)
Service 0° direction beam front to
beam ≥ 25 ≥ 25 ≥ 25 ≥ 25
back ratio (dB)
0° direction beam cross
≥ 17 ≥ 15 ≥ 15 ≥ 15
polar ratio (dB)

Mechanical Properties
74 @2545-2645
66

Distance between TDD columns (mm) 74 @3400-3600


74 @3600-5000
Antenna dimensions (H x W x D) (mm) Φ330 x 982
Packing dimensions (H x W x D) (mm) 1320 x 475 x 465
Antenna weight (kg) 22.4
Antenna packing weight (kg) 30.5 (Including clamps)
851

982

Mast diameter supported (mm) 50–115


Radome material GFRPP
Radome colour Light grey
Operational temperature (℃) -40 to +65
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

Connector 3 x MQ4 Male + 3 x MQ5 Male

Connector position Bottom


Φ330
*GFRPP: Glass Fiber Reinforced Polypropylene

476
Product Product
List Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i-
3xM-R EasyRET 24-Port 2.5-2.6 & 3.4-3.6 & 3.6-5.0 GHz 8T8R TDD
Antenna with 3 integrated RCUs – 1.0 m
Preliminary Issue

Accessories

Item Model Description Weight Units per antenna


1 (With clamp, Separate
Downtilt kit ASMEK0002 Mechanical downtilt: 0–15 ° 13.8 kg
packing)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

477
Product Product
List Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU – 1.5 m

Antenna Specifications

With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1 and Scenario-based beam 2 can be worked simultaneously.
Electrical Properties–Scenario-based Beam 1 (RAT: TDD-LTE)
2300–2690 (y1)

Frequency range (MHz) Sub-beam 0 Sub-beam 1 Sub-beam 2 Sub-beam 3


2300– 2490– 2300– 2490– 2300– 2490– 2300– 2490–
2400 2690 2400 2690 2400 2690 2400 2690
At mid tilt 20.5 21.5 22.0 22.5 22.0 22.5 20.5 21.5
Gain (dBi)
Over all tilts 20.3±0.5 21.3±0.7 21.9±0.5 22.4±0.7 21.9±0.5 22.4±0.7 20.3±0.5 21.3±0.7
Side lobe suppression for first
> 15 > 15 > 15 > 15
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 23±2 19±2 17±2 15±2 17±2 15±2 23±2 19±2
Vertical 3 dB beam width (°) 6.3±0.5 5.8±0.5 6.4±0.5 5.8±0.5 6.4±0.5 5.8±0.5 6.3±0.5 5.8±0.5
Horizontal beam centers (°) -45 -15 15 45
Cross polar isolation (dB) ≥ 25
Front to back ratio, ±30° (dB) > 30 > 30 > 30 > 30
Cross polar ratio at boresight (dB) > 15 > 15 > 15 > 15

Electrical Properties–Scenario-based Beam 2 (RAT: TDD-LTE)


2300–2690 (y1)
Frequency range (MHz)
2300–2400 2490–2690
Gain (dBi) 16.8 17.4
Horizontal 10 dB beam width (°) 135 125
Front to back ratio (dB) > 30 > 30
Broadcast beam Cross polar ratio, 0° (dB) > 15 > 15
Radiation
parameters Vertical 3 dB beam width (°) 6.4 5.8
Side lobe suppression for first side lobe above main beam
> 15 > 15
(dB)
Gain (dBi) 22.0 22.5
Horizontal 3 dB beam width (°) 17 15
Service beam
Vertical 3 dB beam width (°) 6.4 5.8
Front to back ratio (dB) > 30 > 30

General Electrical Properties


Frequency range (MHz) 2300–2690 (y1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each antenna port (dB) –26±2
Calibration
and Max. amplitude tolerance from calibration port to input ports (dB) 0.7
electrical Max. phase tolerance from calibration port to input ports (°) 6
parameters
Ports VSWR 1.5

478
Product Product
List Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU – 1.5 m

Mechanical Properties 68

(137)
Antenna dimensions (H x W x D) (mm) 1509 x 499 x 206
Packing dimensions (H x W x D) (mm) 1770 x 555 x 245
Antenna weight (kg) 24.5
Antenna packing weight (kg) 35.6 (Including clamps)
Radome material GFRPP*
Radome colour Light grey

1509
1310
Operational temperature (℃) –40 to +65
Connector 1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom
Frontal: 538 (at 150 km/h)
Wind load (N) Lateral: 309 (at 150 km/h)
Maximum: 710 (at 150 km/h)
Max. operational wind speed (km/h) 200

62
Survival wind speed (km/h) 250

*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm

Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–12° 2.1 kg 1 (Separate packing)

479
Product Product
List Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU – 1.5 m

Port and Array Layout

1–2

y1 y1 y1 y1

Port Array Freq(MHz) RET S/N RAE S/N


1–2 y1 2300–2690 HWMxxxx……..y1 HWXxxxx……..y1

Pattern Sample for Reference

Scenario-based Beam 1

Sub-beam0 Sub-beam1
(2300–2690 MHz) (2300–2690 MHz)

Sub-beam2 Sub-beam3
(2300–2690 MHz) (2300–2690 MHz)

480
Product Product
List Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU – 1.5 m

Scenario-based Beam 2

Broadcast beam Service beam


(2300–2690 MHz) (2300–2690 MHz)

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 1 (when the motor does not work, 12 V)
Power consumption (W) < 3.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30(typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

481
Product Product
List Category
A08080PD00v06
D08X-4x2300-2400/4x2496-2690-2x(18|65)-(21.5i|16.5i)/(22i|17i)-
M-R Sector Reconfigurable Software Defined Antenna with 1
Integrated RCU – 1.5 m
Antenna Specifications

With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1 and Scenario-based beam 2 can be worked simultaneously.

Electrical Properties–Scenario-based Beam 1 (RAT: TDD-LTE)


2300–2400 (y1) 2496–2690 (y2)
Frequency range (MHz) Sub- Sub- Sub- Sub- Sub- Sub- Sub- Sub-
beam0 beam1 beam2 beam3 beam0 beam1 beam2 beam3
At mid tilt 20.0 21.5 21.5 20.0 21.0 22.0 22.0 21.0
Gain (dBi)
Over all tilts 19.9±0.5 21.4±0.5 21.4±0.5 19.9±0.5 20.8±0.7 21.9±0.7 21.9±0.7 20.8±0.7
Side lobe suppression for first
> 15 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 23±2 17±2 17±2 23±2 19±2 15±2 15±2 19±2

Vertical 3 dB beam width (°) 6.3±0.5 6.4±0.5 6.4±0.5 6.3±0.5 5.8±0.5 5.8±0.5 5.8±0.5 5.8±0.5

Horizontal beam centers (°) –45 –15 15 45 –45 –15 15 45

Cross polar isolation (dB) ≥ 25

Interband isolation (dB) ≥ 25

Front to back ratio, ±30° (dB) > 30 > 30

Cross polar ratio at boresight (dB) > 15 > 15

Electrical Properties–Scenario-based Beam 2 (RAT: TDD-LTE)


Frequency range (MHz) 2300–2400 (y1) 2496–2690 (y2)

Gain (dBi) 16.3 16.9

Horizontal 10 dB beam width (°) 135 125

Front to back ratio (dB) > 30 > 30


Broadcast beam
Cross polar ratio, 0° (dB) > 15 > 15
Radiation Vertical 3 dB beam width (°) 6.4 5.8
parameters
Side lobe suppression for first
> 15 > 15
side lobe above main beam (dB)
Gain (dBi) 21.5 22.0

Horizontal 3 dB beam width (°) 17 15


Service beam
Vertical 3 dB beam width (°) 6.4 5.8

Front to back ratio (dB) > 30 > 30

482
Product Product
List Category
A08080PD00v06
D08X-4x2300-2400/4x2496-2690-2x(18|65)-(21.5i|16.5i)/(22i|17i)-
M-R Sector Reconfigurable Software Defined Antenna with 1
Integrated RCU – 1.5 m

General Electrical Properties


Frequency range (MHz) 2300–2400 (y1) 2496–2690 (y2)

Polarization +45°, –45° +45°, –45°


2–12, continuously 2–12, continuously
Electrical downtilt (°)
adjustable adjustable
General
Electrical downtilt tolerance (°) ±1 ±1
parameters
50 (at 50℃ ambient 50 (at 50℃ ambient
Max. effective power per port (W)
temperature) temperature)
Impedance (Ω) 50 50

Grounding DC grounding DC grounding


Coupling factor between calibration port
–26±2 –26±2
and each antenna port (dB)
Calibration Max. amplitude tolerance from calibration port
and 0.7 0.7
to input ports (dB)
Electrical
Max. phase tolerance from calibration port to
parameters 6 6
input ports (°)
Ports VSWR 1.5 1.5

(137)
Mechanical Properties 68

Antenna dimensions (H x W x D) (mm) 1509 x 499 x 206


Packing dimensions (H x W x D) (mm) 1770 x 555 x 245
Antenna weight (kg) 26.0
Antenna packing weight (kg) 37.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey

1509
Operational temperature (℃) –40 to +65
Connector 2 x MQ4 Male + 2 x MQ5 Male 1310

Connector position Bottom


Frontal: 538 (at 150 km/h)
Wind load (N) Lateral: 309 (at 150 km/h)
Maximum: 710 (at 150 km/h)

Max. operational wind speed (km/h) 200


Survival wind speed (km/h) 250
62

*GFRPP: Glass Fiber Reinforced Polypropylene


Unit: mm

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)

483
Product Product
List Category
A08080PD00v06
D08X-4x2300-2400/4x2496-2690-2x(18|65)-(21.5i|16.5i)/(22i|17i)-
M-R Sector Reconfigurable Software Defined Antenna with 1
Integrated RCU – 1.5 m

Windload Polar Chart

Port and Array Layout

1–2 3–4

Port Array Freq(MHz) RET S/N


1–2 y1 2300–2400 HWxxxxx…….y1y2

3–4 y2 2496–2690 HWxxxxx…….y1y2

484
Product Product
List Category
A08080PD00v06
D08X-4x2300-2400/4x2496-2690-2x(18|65)-(21.5i|16.5i)/(22i|17i)-
M-R Sector Reconfigurable Software Defined Antenna with 1
Integrated RCU – 1.5 m
Pattern Sample for Reference

Scenario-based Beam 1

Sub-beam0 Sub-beam1
(2300–2690 MHz) (2300–2690 MHz)

Sub-beam2 Sub-beam3
(2300–2690 MHz) (2300–2690 MHz)

Scenario-based Beam 2

Broadcast beam Service beam


(2300–2690 MHz) (2300–2690 MHz)

485
Product Product
List Category
A08080PD00v06
D08X-4x2300-2400/4x2496-2690-2x(18|65)-(21.5i|16.5i)/(22i|17i)-
M-R Sector Reconfigurable Software Defined Antenna with 1
Integrated RCU – 1.5 m
Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

486
Product Product
List Category
B. Passive Antenna

Multi-panel Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width(o) Downtilt(o)

4x690-960 4x65 4x15.5


4x1427-2690 4x65 4x18 / EasyRET2.0 24 x 4.3-10 2099 x φ499 *A12480XD00v06 489
4x1695-2690 4x65 4x18

Channel Expansion Antenna

Frequency 3dB Horizontal Electrical


Gain (dBi) Tilt Method Connector Dimension(mm) Model Page
Range (MHz) Beam Width (o) Downtilt (o)

690-960 65 15 23 / 4 x 4.3-10 1599 x φ330 *A704515S0v06 491

Cluster Antenna

Frequency Range 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Page
(MHz) Beam Width (o) Downtilt (o)

900 x Φ330
3 x MQ4 Male + 3
4x3300-3800 65 20i 2-12
x MQ5 Male
1200 x Φ330 (With *ATD4520S01v06 492
Maintenance Cabinet

Omni Antenna

Frequency Range 3dB Horizontal Electrical


Gain (dBi) Connector Dimension(mm) Model Page
(MHz) Beam Width (o) Downtilt (o)

694–960 360 11i 0 fixed 1 x 4.3-10 Female 3360 x φ58 A70VP1100v06 496

487
Product
Category
X2 Antenna

Product Description

X2 antenna is a new form that passive antenna evolution to higher m-MIMO. With the innovative
folding design of the reflector and the miniaturization design of arrays and feeding network, X2
antenna keeps the size of 499 mm but doubles the number of arrays. Based on this architecture, it
can derive various configurations from 2LnH to 4LnH. Benefit from independent arrays up to 4L,
X2 antenna can prevents PIM attacks when operator requires multiple low bands co-deployment.
This enables operator to deploy multiple low bands 4T4R, or sharing for multiple operators. In
addition, the configuration of up to 4L8H can meet the requirements of all Sub 3GHz 4T4R/8T8R
deployment.

X2 Antenna Features
 Support 2LnH-4LnH configuration derivation
 Support FDD 8T8R
 Support multi-low band co-deployment and sharing
 FreSIP inside
 SDIF inside

488
Product Product
List Category
A12480XD00v06
D12X-4x690-960/4x1427-2690/4x1695-2690-4x65/4x65/4x65-
4x15.5i/4x18i/4x18i-12xM-R
EasyRET 24-port 4L8H Antenna with 6 Integrated RCUs – 2.0 m

Preliminary Issue
Antenna Specifications

Electrical Properties Fix antenna


Frequency range (MHz) 4 x (690–960)
Azimuth adjustable range (°) Fixed
Fixed Array
Gain (dBi) 15.1
Azimuth adjustable range (°) 90–180
Rotatable Array
Gain (dBi) 15
Side lobe suppression for first side lobe above main
Typ. 15
beam (dB)
Horizontal 3 dB beam width (°) 68
Vertical 3 dB beam width (°) 9.3
VSWR < 1.5
Front to back ratio, copolar (dB) Typ. 21
Cross polar ratio (dB) 0° Typ. 18
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)

Electrical Properties Fix antenna


Frequency range (MHz) 4 x (1695–2690)
Azimuth adjustable range (°) Fixed
Fixed Array
Gain (dBi) 18
Azimuth adjustable range (°) 90–180
Rotatable Array
Gain (dBi) 17.8
Side lobe suppression for first side lobe above main
Typ. 15
beam (dB)
Horizontal 3 dB beam width (°) 65
Vertical 3 dB beam width (°) 6
VSWR < 1.5
Front to back ratio, copolar (dB) Typ. 25
Cross polar ratio (dB) 0° Typ. 18
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)

489
Product Product
List Category
A12480XD00v06
D12X-4x690-960/4x1427-2690/4x1695-2690-4x65/4x65/4x65-
4x15.5i/4x18i/4x18i-12xM-R
EasyRET 24-port 4L8H Antenna with 6 Integrated RCUs – 2.0 m

Electrical Properties Fix antenna


Frequency range (MHz) 4 x (1427–2690)
Azimuth adjustable range (°) Fixed
Fixed Array
Gain (dBi) 18
Azimuth adjustable range (°) 90–180
Rotatable Array
Gain (dBi) 17.8
Side lobe suppression for first side lobe above main
Typ. 15
beam (dB)
Horizontal 3 dB beam width (°) 65
Vertical 3 dB beam width (°) 6
VSWR < 1.5
Front to back ratio, copolar (dB) Typ. 25
Cross polar ratio (dB) 0° Typ. 18
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)

Mechanical Properties

Antenna dimensions (H x W x D) (mm) 2099 x φ499

Antenna net weight (kg) 65

Mechanical downtilt (°) 0

Connector 2 x 12 x 4.3-10 Female

RET type Integrated RET

RET protocols AISG 2.0/3GPP

490
Product Product
List Category
A704515S0v06
CX-690-960-65-15i-3F-Hybrid 6To4

Preliminary Issue

Antenna Specifications

Electrical Properties

Frequency range (MHz) 690–960

Electrical downtilt (°) 3

Gain (dBi) 14.6

Side lobe suppression for first


> 15
side lobe above main beam (dB)

Horizontal 3 dB beam width (°) 72

Vertical 3 dB beam width (°) 13.5

Horizontal beam centers (°) 0/120/240

VSWR < 1.5

Front to back ratio, ±30° (dB) Typ.22

Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)

Mechanical Properties
1599 x Φ330
Antenna dimensions (H x W x D) (mm)
(Without Maintenance Cabinet)
<33 (Without Maintenance Cabinet)
Antenna net weight (kg)
<47 (With Maintenance Cabinet)
Connector 3 x (1 x MQ4 Male + 1 x MQ5 Male)
Connector position Bottom

491
Product Product
List Category
ATD4520S01v06
C04X-4x3300-3800-65-20i-M-R

Antenna Specifications
General Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable
General
Electrical downtilt tolerance (°) ±1
parameters
Max. effective power per port (W) 50 (at 50℃ ambient temperature)*
Impedance (Ω) 50
Grounding DC grounding
Coupling factor between calibration port and each antenna port (dB) –26±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.9
Calibration
and Max. phase tolerance from calibration port to input ports (°) 7
electrical Ports VSWR 1.5
parameters
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23

* Max. effective power whole antenna: 3 x 400 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties


Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 14.5
Horizontal 3 dB beam width (°) 90

Single Front to back ratio (dB) ≥ 24


column Cross polar ratio, 0° (dB) ≥ 18
beam
Vertical 3 dB beam width (°) 6.7
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
Gain (dBi) 16
Horizontal 3 dB beam width (°) 63
65°
Radiation Front to back ratio (dB) ≥ 25
Broadcast
parameters beam Vertical 3 dB beam width (°) 6.7
Side lobe suppression for first side lobe above main
≥ 16
beam (dB)
0° direct beam gain (dBi) 20

Service 0° direction beam horizontal 3 dB beam width (°) 24


beam 0° direction beam front to back ratio (dB) ≥ 27
0° direction beam cross polar ratio, 0° (dB) ≥ 22
Gain (dBi) 18.8

Soft split Horizontal 3 dB beam width (°) 30


multi-beam Front to back ratio (dB) ≥ 28
Cross polar ratio at boresight (dB) ≥ 17

Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

492
Product Product
List Category
ATD4520S01v06
C04X-4x3300-3800-65-20i-M-R

5G NR Electrical Properties
Frequency range (MHz) 3300–3800 (p1)
Gain (dBi) 14.5
Horizontal 3 dB beam width (°) 90
Front to back ratio (dB) ≥ 24
Single column beam Cross polar ratio, 0° (dB) ≥ 18
Vertical 3 dB beam width (°) 6.7
Side lobe suppression for first side lobe above main beam
≥ 15
(dB)
Radiation Gain (dBi) 19.7
parameters Horizontal 3 dB beam width (°) 65
Front to back ratio (dB) ≥ 25
NR Broadcast beam
Vertical 3 dB beam width (°) 6.6
Side lobe suppression for first side lobe above main
≥ 16
beam (dB)
0° direct beam gain (dBi) 20
0° direction beam horizontal 3 dB beam width (°) 24
NR Service beam
0° direction beam front to back ratio (dB) ≥ 27
0° direction beam cross polar ratio, 0° (dB) ≥ 22
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties
900 x Φ330 (Without Maintenance Cabinet)
Antenna dimensions (H x W x D) (mm)
1200 x Φ330 (With Maintenance Cabinet)
Packing dimensions (H x W x D) (mm) 1340 x 485 x 480
Antenna weight (kg) 38.5
Antenna packing weight (kg) 46.5
Radome material Fiberglass

1200
Φ330 900
Radome colour Light grey
Operational temperature (℃) –40 to +65
Wind load (N) 340 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
300

Connector 3 x (1 x MQ4 Male + 1 x MQ5 Male)


Connector position Bottom

Flange interface (thickness: 12 mm) Φ346

Unit: mm

493
Product Product
List Category
ATD4520S01v06
C04X-4x3300-3800-65-20i-M-R

Antenna Information Management Module (AIMM) Specifications


RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) DC 10–30
< 2 (when the motor does not work, 12 V)
Power consumption (W)
< 13 (when the motor is working, 12 V)
Adjustment time (full range) (s) Typ. 60
Calibration channel integrate the Bias-T and supporting OOK modulation signal
RET interface 1 (RF feeder)
communication
2 x 8 pin connector according to IEC 60130-9
RET interface 2 (485 connector)
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE (the RAE version follows the latest AISG standard)

Port and Array Layout 1–2

p1 p1 p1 p1

Port Array Freq(MHz) RET S/N RAE S/N


1–2 p1 3300–3800 HWMxxxx……..p1 HWXxxxx……..p1

L CL CR R

MQ5-4 p1.L+ MQ5-3 p1.CL+ MQ5-2 p1.CR+ MQ5-1 p1.R+

MQ4-4 p1.L- MQ4-3 p1.CL- MQ4-2 p1.CR- MQ4-1 p1.R-

Physical array & port mapping according to AISG naming convention:


Left–Center Left–Center Right–Right (seen from front of antenna)

494
Product Product
List Category
ATD4520S01v06
C04X-4x3300-3800-65-20i-M-R

Pattern Sample for Reference

Single column 65° Broadcast

Service 0° 5G NR Broadcast

495
Product Product
List Category
A70VP1100v06
OV-694-960-11i-0F

Antenna Specifications
Electrical Properties
694–960 (r1)
Frequency range (MHz)
694–803 790–862 824–894 880–960
Polarization Vertical
Beam tilt (°) 0
Gain (dBi) 10.4±0.5 10.5±0.6 10.6±0.5 11.0±0.7
Side lobe suppression for first side
> 16 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 360 360 360 360
Vertical 3 dB beam width (°) 7.3±0.6 6.8±0.7 6.6±0.8 6.5±0.8
VSWR < 1.5
Max. effective power per port (W) 200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ –150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Mechanical Properties
Antenna dimensions (H x Diameter)
3360 x φ58
(mm)
Packing dimensions (H x W x D) (mm) 3475 x 220 x 220
Antenna weight (kg) 6.9
Clamps weight (kg) 5.1
Antenna packing weight (kg) 15.7 (Including clamps)
Mast diameter supported (mm) 50–115
3360
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) –40 to +65
Wind load (N) 225 (at 150 km/h)
Max. operational wind speed (km/h) 200
φ58
Connector 1 x 4.3-10 Female
Connector position Bottom
φ65
301

Unit: mm

496
Product Product
List Category
A70VP1100v06
OV-694-960-11i-0F

Port and Array Layout

r1

Pattern Sample for Reference

694–960 MHz
(r1)

497
Product Product
List Category
C. Digital Antenna System
C-1. RET System

C-1-1. Antenna Imformation Management Module (AIMM)

Input voltage Adjustment time


AISG type Dimension (mm) Model Page
range (V) (full range) (min)

DC 10 - 30 AISG 2.0 Typ. < 0.5 197 x 82 x 30 AIMM20S11v01 499


DC 10 - 30 AISG 2.0 Typ. < 0.5 197 x 107 x 30 AIMM20D11v01 500
DC 10 - 30 AISG 2.0 Typ. < 0.67 203 x 153 x 30 AIMM20M11S0v01 501
DC 10 - 30 AISG 2.0 Typ. < 0.67 203 x 153 x 30 AIMM20M22S0v01 502
DC 10 - 30 AISG 2.0 Typ. < 0.67 203 x 153 x 30 AIMM20M11BTv02 503
DC 10 - 30 AISG 2.0 Typ. < 0.67 203 x 153 x 30 AIMM20M22BTv01 504

C-1-2. Smart Bias Tee (SBT)

Frequency
AISG type Insertion loss (dB) Dimension (mm) Connector Model Page
Range (MHz)

≤ 0.1
(690-960/1710-
690-2700 AISG 2.0 2690 MHz) 75 x 137 x 45 4.3-10 ASBT00001v06 505
≤ 0.15
(960-1710 MHz)

C-1-3. AISG Connecting Cables

Model Page

AISG Connecting Cables For Remote Electrical Tilt (RET) System 508
AISG Connecting Cables For Huawei RRU RET_Port 509

498
Product
Category
AIMM20S11v01
Single-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.

Protocol AISG 2.0 / 3GPP


Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 to +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 350
Packing Weight (g) 448
Dimensions (L x W x H) (mm) 197 x 82 x 30
Packing size (L x W x H) (mm) 250 x 118 x 40

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and base
EN/IEC 60950-22(Safety – Equipment
station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain in: Male Daisy chain out: Female

Appearance Male Female

499
Product Product
List Category
AIMM20D11v01
Dual-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.

Protocol AISG 2.0 / 3GPP


Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 30
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 … +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 500
Packing weight (g) 598
Dimensions (L x W x H) (mm) 203 x 107 x 30
Packing size (L x W x H) (mm) 250 x 118 x 40

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and base
EN/IEC 60950-22(Safety – Equipment
station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain in: Male Daisy chain out: Female

Appearance Male Female

500
Product Product
List Category
AIMM20M11S0v01
Multi-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 … +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 570
Packing weight (g) 683
Dimensions (L x W x H) (mm) 203 x 153 x 30
Packing size (L x W x H) (mm) 245 x 163 x 37

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and base
EN/IEC 60950-22(Safety – Equipment station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain in: Male Daisy chain out: Female

Appearance Male Female

501
Product Product
List Category
AIMM20M22S0v01
Multi-Band Antenna Information Management Module with Two
Pairs of AISG Connectors (2 Input and 2 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 to +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 580
Packing weight (g) 693
Dimensions (L x W x H) (mm) 203 x 153 x 30
Packing size (L x W x H) (mm) 245 x 163 x 37

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and base
EN/IEC 60950-22(Safety – Equipment
station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain out: Female

Daisy chain in: Male

Daisy chain out: Female


Daisy chain in: Male

Appearance Male Female

502
Product Product
List Category
AIMM20M11BTv02
Multi-band Antenna Information Management Module with a Pair of
AISG Connectors (1 Input and 1 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.

Protocol AISG 2.0 / 3GPP


Input voltage range (V) 10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 … +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 610
Packing weight (g) 723
Dimensions (L x W x H) (mm) 203 x 153 x 30
Packing size (L x W x H) (mm) 245 x 163 x 37

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and
EN/IEC 60950-22(Safety – Equipment
base station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain in: Male Daisy chain out: Female

Appearance Male Female

503
Product Product
List Category
AIMM20M22BTv01
Multi-band Antenna Information Management Module with Two
Pairs of AISG Connectors (2 Input and 2 Output)

Feature Description

 The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC

< 1 (when the motor does not work, 12 V)


Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s) Typ. 40


4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male // Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
Operating temperature range (℃) -40 … +65
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
Weight (g) 670
Packing weight (g) 783
Dimensions (L x W x H) (mm) 203 x 153 x 30
Packing size (L x W x H) (mm) 245 x 163 x 37

Standards: EN/IEC 60950-1(Safety) Please note:


Before the installation, check whether the AIMM and
EN/IEC 60950-22(Safety – Equipment
base station support the same AISG protocol.
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification: CE, FCC, IC, ECM, RoHS, REACH, WEEE

Daisy chain out: Female

Daisy chain in: Male

Daisy chain out: Female


Daisy chain in: Male

Appearance Male Female

504
Product Product
List Category
ASBT00001v06

SBT-690-2700-001

Features

 Convert signals between OOK and RS485.


 Low passive intermodulation products, low insertion loss
and high power capacity.
 Ultra wide band design for various communication system.
 Small volume, light weight.
 Support AISG 2.0 protocol.

SBT = Smart Bias Tee


RCU = Remote Control Unit for remote electrical
control of antenna tilt
BTS = Base Transceiver Station
ASBT00001v06
AISG= Antenna Interface Standards Group

Block Diagram

Antenna
RCU

ASBT00001v06 SBT
Feeder Cable

Feeder Cable

BTS

505
Product Product
List Category
ASBT00001v06

SBT-690-2700-001

Model ASBT00001v06

Port 1 (Connector type) Antenna (4.3-10 Male)

Port 2 (Connector type) Feeder (4.3-10 Female)

Port AISG (Connector type) AISG (8-pin Connecter Female)

Electrical Properties

Frequency range (MHz) 690 - 2700

≤ 0.1 (690 - 960 MHz //1710 - 2690 MHz)


Insertion loss (dB) Port 1 ←→ Port 2
≤ 0.15 (960 - 1710 MHz)

Port 1 ←→ Port 2
Isolation for DC
≥ 70
signal (dB)
Port 1 ←→ Port AISG

≤ 1.15 (690 - 960 MHz // 1710 - 2690 MHz)


VSWR Port 1 and Port 2
≤ 1.2 (960 - 1710 MHz)

Port 1 and Port 2 Avg. ≥ 500 (690 - 960 MHz) // Avg. ≥ 250 (1710 - 2690 MHz)
Input power (W)
Port AISG < 2.5 A (+8 … +30 V DC)

DC supply voltage (V) +8 to +30

RF impedance (Ω) 50

Intermodulation products (dBc) < -160 (3rd order, 2 x 43 dBm)

Power consumption (W) Typ. 0.6

Modem carrier frequency (MHz) 2.176

Environmental Specification

Operating temperature (℃) -40 to +70

Application scene Indoor // outdoor

IP rating IP67

Lightning protection (kA) 3 (10/350 us)

Mechanical Specification

SBT Dimensions (W x H x D) (mm) 75 x 137 x 45 (with connectors)

Packing dimensions (W x H x D) (mm) 78 x 185 x 58

SBT net Weight (kg) < 0.75

Packing weight (kg) < 0.80

506
Product Product
List Category
ASBT00001v06

SBT-690-2700-001

Unit: mm

507
Product Product
List Category
AISG Connecting Cables

For Remote Electrical Tilt (RET) System

Technical Specification
2 x 8 pin connector according to IEC 60130-9
Connectors
Female / Male
Cable 2 x 0.25 mm2 + 4 x 0.75 mm2 cable according to UL2464
Rate current 4A
Protection Class IP67 (Coupled)
Temperature Range -40 ~ 80 ℃
Color Black
Single Bend radius 60 mm Min.
Multiple Bend radius 120 mm Min.
Application scene Indoor // Outdoor

Pin Number Signal


1 +12 V DC Nominal
2 Not used
3 RS485 B
4 Not used
5 RS485 A
6 10 V - 30 V DC
7 DC Return
8 Not used Unit: mm

Cable series

Length BOM Code Model


0.5 m 04045920 AAISGCBL0

2m 04045921 AAISGCBL2

5m 04050228 AAISGCBL5

10 m 04050184 AAISGCBL10

15 m 04045922 ACOAISG01

30 m 04050230 AAISGCL00

50 m 04050231 AAISGCL50
60 m 04050182 AAISGCL60
70 m 04050232 AAISGCBL70

508
Product Product
List Category
AISG Connecting Cables

For Huawei RRU RET_Port

Technical Specification
8 pin connector according to IEC 60130-9
Connector 1 (to be connected to RET module)
Female
9 pin DB9 connector, water-proofed
Connector 2 (to be connected to Huawei RRU “RET_port”)
Male
Cable 4 Pair x 24 AWG
Rate current 4A
Protection Class IP67 (when coupled on RRU and RET)
Temperature Range -40 ~ 80 ℃
Color Black
Single Bend radius 60 mm Min.
Multiple Bend radius 120 mm Min.
Application scene Indoor or Outdoor

Signal
Pin Number
Female Male
1 +12 V DC nominal +12 V DC nominal Female Male
2 Not used Not used
3 RS485 B RS485 B
4 RS485 GND RS485 GND
5 RS485 A RS485 A
6 +12 V DC nominal Not used
7 DC Return Not used
8 Not used Not used
9 / DC Return

Cable series
Length BOM Code Model
3m 04070193 CSST00101
5m 04070097 ACOAISG02
10m 04070097-002 AISGCC10M
20m 04070097-003 AISGCC20M

509
Product Product
List Category
D. Antenna Line Product
D-1. TMA
Frequency Range AISG
Description Gain(dB) Connector Dimension (mm) Model Page
(MHz) type

RX:703-748MHz AISG
700M
TX:758-803MHz v2.0
12 ±1 4 x 4.3-10 215 x 290 x 130 ATA702000v06 511

RX:832-862MHz AISG
DD800M
TX:791-821MHz v2.0
12±1 4 x 4.3-10 170 × 230 × 120 ATA802001v06 514

RX:880-915MHz AISG
E900M
TX:925-960MHz v2.0
12±1 4 x 4.3-10 170 × 230 × 120 ATA902007v06 517

RX:1710-1785 MHz AISG


1800M
TX:1805-1880 MHz v2.0
12±1 4 x 4.3-10 203 x 269 x 56 ATA182003v06 520

RX:1920-1980MHz AISG
2100M
TX:2110-2170MHz v2.0
12±1 4 x 4.3-10 170 × 225 × 54.5 ATA212007v06 523

RX:2500-2570MHz AISG
2600M
TX:2620-2690MHz v2.0
12 ±1 4 x 4.3-10 160 x 210 x 54.5 ATA262000v06 526

Dual Band 1800M &


RX:1710-1785/1920-1980MHz AISG
2100M
TX:1805-1880/2110-2170MHz v2.0
12±1 4 x 4.3-10 203 x 233 x 96 ATADU2017v06 529
(2input2output)

RX:1710-1785&1920-1980/
Dual Band (1800M &
2500-2570MHz AISG
2100M) & 2600M
TX:1805-1880&2110-2170/ v2.0
12±1 6 x 4.3-10 252 x 236 x 95 ATADU2015v06 532
(2input4output)
2620-2690MHz

Dual Band
700M & 800M & RX:703-748/832-915MHz AISG
900M TX:758-821/925-960MHz v2.0
12±1 4 x 4.3-10 256 x 296 x 126 ATADU2016v06 535
(2input2output)

RX:1710-1785&1920-1980/
Triple Band (1800M
2500-2570MHz AISG
& 2100M) & 2600M
TX:1805-1880&2110-2170/ v2.0
12(Nominal) 4 x 4.3-10 295 x 250 x 95 ATATR2002v06 538
(2input2output)
2620-2690MHz

RX:1710-1785/1920-1980MHz AISG
1800M&2100M
TX:1805-1880/2110-2170MHz v2.0
12±1 6 x 4.3-10 196 x 280 x 110 ATADU2023v06 541

DD800M&E900M RX:832-862/880-915MHz AISG


TX:791-821/925-960MHz v2.0
12±1 6 x 4.3-10 247 x 342 x 132 ATADU2024v06 544

510
Product
Category
ATA702000v06

DTMA-700-12dB-2eNodeBport2ANTport-AISG

Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and mast mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support default 12dB fixed gain.

Appearance and Block Diagram

ANT 0 ANT 1

Lightning Lightning
protection protection

LNA LNA
Control
Circuit
&
Modem
RS485

Bias Tee & DC & OOK DC & OOK Bias Tee &
Lightning protection Lightning protection

eNodeB 0 RET eNodeB 1

511
Product Product
List Category
ATA702000v06

DTMA-700-12dB-2eNodeBport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 758 - 803
Bandwidth (MHz) 45
Insertion loss (dB) Avg. < 0.45
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz) 703 - 748
Bandwidth (MHz) 45
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) ≤ 3.5 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.2 (12 dB Gain, +22 to +28 ℃)
Output 1dB compression (dBm) ≥ 8 (12 dB Gain)
OIP3 (dBm) ≥ 20 (12 dB Gain)
Electrical Specifications
AISG Mode (Total ports)
DC supply voltage (V) 9 - 30
@12 V Max. 192
Operating current per TMA
(mA) @17 V Max. 139
(without RET)
@30 V Max. 95
Alarm management AISG
Power consumption (W) < 3.5
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1 , EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm) 215 x 290 x 130 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 290 x 500 x 265
DTMA weight (kg) ≤ 8.5 (with brackets)
Packing weight (kg) ≤ 9.5
DTMA Volume (L) 8.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

512
Product Product
List Category
ATA702000v06

DTMA-700-12dB-2eNodeBport2ANTport-AISG

M8

Unit : mm

513
Product Product
List Category
ATA802001v06

DTMA-800-12dB-2BTSport2ANTport-AISG

Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support 12dB fixed gain.

Appearance and Block Diagram

514
Product Product
List Category
ATA802001v06

DTMA-800-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 791 - 821
Bandwidth (MHz) 30
Insertion loss (dB) Avg. < 0.4
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (2 TX carriers at +43 dBm)

Rx Specifications
Frequency range (MHz) 832 - 862
Bandwidth (MHz) 30
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.3 (12 dB Gain, +22 to +28 ℃)
Output 1dB compression (dBm) ≥ 12 (12 dB Gain)
OIP3 (dBm) ≥ 27 (12 dB Gain)

Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 210
Operating current per TMA (mA)
@17 V Max. 160
(without RET)
@30V Max. 95
Power consumption (W) <3

Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
DTMA dimensions (W x H x D) (mm) 170 x 230 x 120(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 240 x 405 x 210
DTMA weight (kg) ≤ 6.5 (with brackets)
Packing weight (kg) ≤ 7.5
DTMA Volume (L) 4.7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5:
AISG connector
RS485A, pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Pole mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

515
Product Product
List Category
ATA802001v06

DTMA-800-12dB-2BTSport2ANTport-AISG

Unit : mm

516
Product Product
List Category
ATA902007v06

DTMA-E900-12dB-2BTSport2ANTport-AISG

Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support default 12dB fixed gain.

Appearance and Block Diagram

517
Product Product
List Category
ATA902007v06

DTMA-E900-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 925 - 960
Bandwidth (MHz) 35
Insertion loss (dB) Avg. < 0.4
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (2 TX carriers at +43 dBm)

Rx Specifications
Frequency range (MHz) 880 - 915
Bandwidth (MHz) 35
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2.0 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.3 (12 dB Gain, +22 to +28 ℃)
Output 1dB compression (dBm) ≥ 12 (12 dB Gain)
OIP3 (dBm) ≥ 27 (12 dB Gain)

Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 210
Operating current per TMA (mA)
@17 V Max. 160
(without RET)
@30 V Max. 95
Power consumption (W) <3

Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
DTMA dimensions (W x H x D) (mm) 170 x 230 x 120 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 205 x 385 x 130
DTMA weight (kg) ≤ 6.5 (with brackets)
Packing weight (kg) ≤ 7.5
DTMA Volume (L) 4.7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5:
AISG connector
RS485A, pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Pole mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

518
Product Product
List Category
ATA902007v06

DTMA-E900-12dB-2BTSport2ANTport-AISG

Unit : mm

519
Product Product
List Category
ATA182003v06

DTMA-1800-12dB-2BTSport2ANTport-AISG

Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support default 12dB fixed gain.

Appearance and Block Diagram

520
Product Product
List Category
ATA182003v06

DTMA-1800-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 1805 - 1880
Bandwidth (MHz) 75
Insertion loss (dB) Avg. < 0.4
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz) 1710 - 1785
Bandwidth (MHz) 75
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.3 (+22 to +28 ℃)
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27
Electrical Specifications
AISH Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 210
Operating current per TMA
(mA) @17 V Max. 160
(without RET)
@30 V Max. 95
Power consumption (W) <3
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
203 x 269 x 56
DTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 460 x 260 x 165
DTMA weight (kg) ≤ 4.9 (with brackets)
Packing weight (kg) ≤ 5.9
DTMA Volume (L) 3.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
pole mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

521
Product Product
List Category
ATA182003v06

DTMA-1800-12dB-2BTSport2ANTport-AISG

Unit : mm

522
Product Product
List Category
ATA212007v06

DTMA-2100-12dB-2BTSport2ANTport-AISG

Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features
 High linearity and low noise performance.
 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support default 12dB fixed gain.

Appearance and Block Diagram

523
Product Product
List Category
ATA212007v06

DTMA-2100-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 2110 - 2170
Bandwidth (MHz) 60
Insertion loss (dB) Avg. < 0.25
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -165 (2 TX carriers at +43 dBm)

Rx Specifications
Frequency range (MHz) 1920 - 1980
Bandwidth (MHz) 60
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.2 (+22 to +28 ℃)
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27

Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 210
Operating current per TMA
(mA) @17 V Max. 160
(without RET)
@30 V Max. 95
Power consumption (W) <3

Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
DTMA dimensions (W x H x D) (mm) 170 x 225 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 400 x 220 x 150
DTMA weight (kg) ≤ 3.8 (with brackets)
Packing weight (kg) ≤ 4.5
DTMA Volume (L) 2.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A, pin7:
AISG connector
DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Pole mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

524
Product Product
List Category
ATA212007v06

DTMA-2100-12dB-2BTSport2ANTport-AISG

Unit : mm

525
Product Product
List Category
ATA262000v06

DTMA-2600-12dB-2eNodeBport2ANTport-AISG

Product Description
Product Description

The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-

noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and

downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and

data communication quality.

Features
Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Wall mounting and mast mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.
 Support default 12dB fixed gain.

Appearance
Appearance andand Block
Block Diagram
Diagram

ANT 0 ANT 1

Lightning Lightning
protection protection

LNA LNA
Control
Circuit
&
Modem
RS485

Bias Tee & DC & OOK DC & OOK Bias Tee &
Lightning protection Lightning protection

eNodeB 0 RET eNodeB 1

526
Product Product
List Category
ATA262000v06

DTMA-2600-12dB-2eNodeBport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 2620 - 2690
Bandwidth (MHz) 70
Insertion loss (dB) Avg. < 0.4
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (2 TX carriers at +43 dBm)

Rx Specifications
Frequency range (MHz) 2500 - 2570
Bandwidth (MHz) 70
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) ≤ 3.0 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Avg. < 1.3 (+22 to +28 ℃)
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 24

Electrical Specifications
AISG Mode (BTS ports)
DC supply voltage (V) 9 - 30
@12 V Max. 192
Operating current per TMA
(mA) @17 V Max. 139
(without RET)
@30 V Max. 95
Alarm management AISG
Power consumption (W) < 3.5

Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1 , EN 301 489-50
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
DTMA dimensions (W x H x D) (mm) 160 x 210 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 205 x 380 x 130
DTMA weight (kg) ≤ 3.1 (with brackets)
Packing weight (kg) ≤ 4.0
DTMA Volume (L) 1.8
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female

527
Product Product
List Category
ATA262000v06

DTMA-2600-12dB-2eNodeBport2ANTport-AISG

M8

Unit : mm

528
Product Product
List Category
ATADU2017v06

MTMA-1800&2100-12dB-2BTSport2ANTport-AISG

Product Description
Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality.

Features
Features
 High linearity and low noise performance.
 Power failure bypass for high reliability.
 Light weight and compact design.
 Designed for co-location purposes.
 Wall mounting and Pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.

Appearance and Block Diagram


Appearance and Block Diagram

529
Product Product
List Category
ATADU2017v06

MTMA-1800&2100-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 1805- 1880 2110 - 2170
Bandwidth (MHz) 75 60
Insertion loss (dB) Typ. < 0.4 Typ. < 0.3
Return loss (dB) ≥ 19
< 200 (+53 dBm) CW < 200 (+53 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (3rd order; with 2 x 43 dBm) ≤ -160 (3rd order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz) 1710 - 1785 1920-1980
Bandwidth (MHz) 75 60
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Typ. < 1.2 Typ. < 1.4
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 310
Operating current per TMA
(mA) @17 V Max. 220
(without RET)
@30 V Max. 130
Power consumption (W) <4
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
203 x 233 x 96
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 495 x 315 x 250
MTMA weight (kg) ≤ 6.4 (with brackets)
Packing weight (kg) ≤ 7.4
MTMA Volume (L) 4.5
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Pole mounting
Pole diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)

530
Product Product
List Category
ATADU2017v06

MTMA-1800&2100-12dB-2BTSport2ANTport-AISG

Unit : mm

531
Product Product
List Category
ATADU2015v06

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG

Product Description
Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be

operated from one primary controller, either on BTS0 or BTS1 port. When scanning the AISG ALD, the TMA is responding to the

AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).

Features
Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Designed for co-location purposes.
 Wall mounting and mast mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.

Appearance and Block Diagram


Appearance and Block Diagram

532
Product Product
List Category
ATADU2015v06

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG

Tx Specifications
Frequency range (MHz) 1805 - 1880&2110 - 2170 2620 - 2690
Bandwidth (MHz) 75&60 70
Insertion loss (dB) Typ. < 0.4&Typ. < 0.25 Typ. < 0.35
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
≤ -160 (3rd order; with 2 x 43 dBm)
@1800M ≤ -160 (3rd order; with 2 x 43
Intermodulation products in Rx band (dBc)
≤ -165 (7th order; with 2 x 43 dBm) dBm) @2600M
@2100M
Rx Specifications
Frequency range (MHz) 1710 - 1785&1920 - 1980 2500 - 2570
Bandwidth (MHz) 75&60 70
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Typ. < 2.5
Gain (dB) 12 ±1
Noise figure (dB) Typ. < 1.3 &Typ. < 1.4 Typ. < 1.5
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27
Electrical Specifications
DC supply voltage (V) 9 - 30
@12 V Max. 250
Operating current per TMA (mA)
@17 V Max. 176
(without RET)
@30 V Max. 100
Alarm management AISG2.0
Power consumption (W) < 3.0
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1 , EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
252 x 236 x 95
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 405 x 305 x 210
MTMA weight (kg) 8.0
Packing weight (kg) 9.5
MTMA Volume (L) 5.6
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40 - 135
Connector 6 x 4.3-10 Female ( Two ports are BTS and four ports are ANT)

533
Product Product
List Category
ATADU2015v06

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG

M8

Unit : mm

534
Product Product
List Category
ATADU2016v06

MTMA-700&800&900-12dB-2BTSport2ANTport-AISG

Product Description
Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality.

Features
Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Designed for co-location purposes.
 Wall mounting and pole mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.

Appearance and Block Diagram


Appearance and Block Diagram

535
Product Product
List Category
ATADU2016v06

MTMA-700&800&900-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 758 - 821 925 - 960
Bandwidth (MHz) 63 35
Insertion loss (dB) Typ. < 0.4 Typ. < 0.4
Return loss (dB) ≥ 19
< 200 (+53 dBm) CW < 200 (+53 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ -160 (3rd order; with 2 x 43 dBm) ≤ -160 (3rd order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz) 703 - 748 832 - 915
Bandwidth (MHz) 45 83
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Avg. ≤ 2 (DC OFF)
Gain (dB) 12 ±1
Noise figure (dB) Typ. < 1.3 Typ. < 1.3
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V) 9 - 30
@12 V Max. 310
Operating current per TMA
(mA) @17 V Max. 220
(without RET)
@30 V Max. 130
Power consumption (W) <4
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
256 x 296 x 126
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 320 x 475 x 250
MTMA weight (kg) ≤ 12 (with brackets)
Packing weight (kg) ≤ 13
MTMA Volume (L) 9.5
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Pole mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)

536
Product Product
List Category
ATADU2016v06

MTMA-700&800&900-12dB-2BTSport2ANTport-AISG

Unit : mm

537
Product Product
List Category
ATATR2002v06

MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG

Product
Product Description
Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be

operated from one primary controller, either on BTS0 or BTS1 port. When scanning the AISG ALD, the TMA is responding to the

AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).

Features
Features

 High linearity and low noise performance.


 Power failure bypass for high reliability.
 Light weight and compact design.
 Designed for co-location purposes.
 Wall mounting and mast mounting.
 Built-in lightning protection up to 10 kA.
 Support AISG 2.0 protocol.

Appearance and Block Diagram

ANT0 ANT1
1800&2100&2600 1800&2100&2600

Bias Tee & Bias Tee


Lightning Protection &Lightning Protection

RX2600 RX2100 RX1800 RX1800 RX2100 RX2600

TX2600 TX1800 TX1800 TX2600

TX2100 TX2100
LNA LNA Control LNA LNA
Circuit
&
Modem

RX2600 RX2100 RX1800 RX1800 RX2100 RX2600


RS485

DC &OOK DC &OOK
Bias Tee & Bias Tee &
Lightning protection Lightning protection

RET_0
BTS 0 BTS 1

538
Product Product
List Category
ATATR2002v06

MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG

Tx Specifications
Frequency range (MHz) 1805 - 1880 2110 - 2170 2620 - 2690
Bandwidth (MHz) 75 60 70
Insertion loss (dB) Typ. < 0.4 Typ. < 0.25 Typ. < 0.35
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products ≤ -160 (3rd order; with ≤ -165 (7th order; with ≤ -160 (3rd order; with
in Rx band (dBc) 2 x 43 dBm) @1800M 2 x 43 dBm) @2100M 2 x 43 dBm) @2600M
Rx Specifications
Frequency range (MHz) 1710 - 1785 1920 - 1980 2500 - 2570
Bandwidth (MHz) 75 60 70
≥ 19 (DC ON)
Return loss (dB)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB) Typ. < 2.0 Typ. < 2.0 Typ. < 2.0
Gain (dB) 12(nominal)
Noise figure (dB) Typ. <1.2 Typ. <1.2 Typ. < 1.4
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 27
Electrical Specifications
DC supply voltage (V) 9 - 30
@12 V Max. 250
Operating current
per TMA (mA) @17 V Max. 176
(without RET)
@30 V Max. 100
Alarm management AISG2.0
Power consumption (W) < 3.0
Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1 , EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
295 x 250 x 95
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 440 x 360 x 220
MTMA weight (kg) 9.5
Packing weight (kg) 10.5
MTMA Volume (L) 7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC
AISG connector
return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40 - 135
Connector 4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)

539
Product Product
List Category
ATATR2002v06

MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG

M8

Unit : mm

540
Product Product
List Category
ATADU2023v06

MTMA-1800/2100-12dB-2BTSport4ANTport-AISG

Product Description
Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the TMA is responding to

the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency

band).

Features
 Features
High linearity and low noise performance.

 Power failure bypass for high reliability.

 Light weight and compact design.

 Designed for co-location purposes.

 Wall mounting and mast mounting.

 Built-in lightning protection up to 10 kA.

 Support AISG 2.0 protocol.

Appearance and Block Diagram


Appearance and Block Diagram

541
Product Product
List Category
ATADU2023v06

MTMA-1800/2100-12dB-2BTSport4ANTport-AISG

Tx Specifications
Frequency range (MHz) 1805–1880 2110–2170
Bandwidth (MHz) 75 60
Insertion loss (dB) Typ. < 0.45 Typ. < 0.35
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ –153 (3rd order, with 2 x 43 dBm) ≤ –165 (7th order, with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz) 1710–1785 1920–1980
Bandwidth (MHz) 75 60
≥ 19 (DC ON)
Return loss (dB)
≥ 14 (DC OFF)
Insertion loss in by-pass mode (dB) Typ. < 3.0
Gain (dB) 12±1
Noise figure (dB) Typ. < 1.2 Typ. < 1.2
Output 1 dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 24
Electrical Specifications
DC supply voltage (V) 9–30
@12 V Max. 416
Operating current per TMA
(mA) @17 V Max. 294
(without RET)
@30 V Max. 166
Alarm management AISG
Power consumption (W) < 5.0
Environmental Specification
Operating temperature range (℃) –40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)
Mechanical Specification
196 x 280 x 110
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 245 x 475 x 220
MTMA weight (kg) ≤ 7.3 (with brackets)
Packing weight (kg) ≤ 8.5
MTMA Volume (L) 6.0
8-pin female, IEC 60130-9 (pin6: 9 V–30 V DC, pin3: RS485B, pin5: RS485A, pin7:
AISG connector
DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40–135
Connector 6 x 4.3-10 Female ( Two ports are BTS and four ports are ANT)

542
Product Product
List Category
ATADU2023v06

MTMA-1800/2100-12dB-2BTSport4ANTport-AISG

196
30
140
110

120
84.6
115
46
80 55 4-9 4-□18

4-9
321
299
280
355

M8

Unit : mm

543
Product Product
List Category
ATADU2024v06

MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG

Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location

purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the

uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power

used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the TMA is responding to

the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency

band).

Features

 High linearity and low noise performance.

 Power failure bypass for high reliability.

 Light weight and compact design.

 Designed for co-location purposes.

 Wall mounting and mast mounting.

 Built-in lightning protection up to 10 kA.

 Support AISG 2.0 protocol.

Appearance and Block Diagram

544
Product Product
List Category
ATADU2024v06

MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG

Tx Specifications
Frequency range (MHz) 791–821 925–960
Bandwidth (MHz) 30 35
Insertion loss (dB) Typ. < 0.4
Return loss (dB) ≥ 19
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc) ≤ –153 (3rd order, with 2 x 43 dBm)

Rx Specifications
Frequency range (MHz) 832–862 880–915
Bandwidth (MHz) 30 35
≥ 19 (DC ON)
Return loss(dB)
≥ 14 (DC OFF)
Insertion loss in by-pass mode (dB) Typ. < 3.0
Gain (dB) 12±1
Noise figure (dB) Typ. < 1.3
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 24

Electrical Specifications
DC supply voltage (V) 9–30
@12 V Max. 416
Operating current per TMA
(mA) @17 V Max. 294
(without RET)
@30 V Max. 166
Alarm management AISG
Power consumption (W) < 5.0

Environmental Specification
Operating temperature range (℃) -40 to +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC EN 301 489-1, EN 301 489-50
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
247 x 342 x 132
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 300 x 545 x 250
MTMA weight (kg) ≤ 10.5 (with brackets)
Packing weight (kg) ≤ 12.3
MTMA Volume (L) 11.2
8-pin female, IEC 60130-9 (pin6: 9 V–30 V DC, pin3: RS485B, pin5: RS485A, pin7:
AISG connector
DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) 40–135
Connector 6 x 4.3-10 Female ( Two ports are eNodeB and four ports are ANT)

545
Product Product
List Category
ATATR2002v06

MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG

130
132
162

4-□18 60 72
4-9

4-9
424

390

368

342

46 M8
84.6
120
247

Unit : mm

546
Product Product
List Category
D-2. Combiner

Max. Input Intermodulation


Category Pass Band(MHz) DC-Bypass Dimension (mm) Model Page
power(W) (dBm)

Band 1: 690-862/ Smart Double Unit:


Band 2: 880-960
200
DC-Bypass
< -117
103 x 196 x 143
ACOMD2S05v06 549

Band 1: 690-862/ 690-862MHz Double Unit:


Band 2: 880-960
200
DC-Bypass
< -117
101 x 194 x 128
ACOMD2L11v07 552

Band 1: 690-862/ 880~960MHz Double Unit:


Band 2: 880-960
200
DC-bypass
< -117
101 x 194 x 128
ACOMD2H25v07 552

Band 1: 690-862/ All Double Unit:


Band 2: 880-960
200
DC-bypass
< -117
101 x 194 x 128
ACOMD2A07v07 552

Band 1: 690-803/ 690~803MHz Double Unit:


Band 2: 824-960
300
DC-bypass
< -112
200 x 230 x 107
ACOMD2L08v06 555

Band 1 : 698-960/ 1710~2200MHz Double Unit:


Band 2: 1710-2200
300
DC-bypass
< -110
130 x 190 x 105
ACOMD2H11v06 558

Band 1: 698-960 / All Double Unit:


Band 2: 1710-2200
300
DC-bypass
< -110
130 x 190 x 105
ACOMD2H19v06 561

Band 1: 698-960 / 1710~2700MHz Double Unit:


Band 2: 1710-2700
300
DC-bypass
< -110
130 x 190 x 105
ACOMD2H00v06 564

Band 1: 698-960/ All Double Unit:


Band 2: 1710-2700
300
DC-bypass
< -110
130 x 190 x 105
ACOMD2H22v06 564
Dual-band
Combiner Band 1: 1427-1880 / Smart Double Unit:
Band 2: 1920-2200
200
DC-bypass
< -117
131 x 120 x 109
ACOMD2S02v06 567

Band 1: 1427-1880 / 1920~2200MHz Double Unit:


Band 2: 1920-2200
200
DC-bypass
< -117
131 x 120 x 94
ACOMD2H26v06 570

Band 1: 1427-1880 / 1427~1880MHz Double Unit:


Band 2: 1920-2200
200
DC-bypass
< -117
131 x 120 x 94
ACOMD2L12v06 570

Band 1: 1427-1880 / All Double Unit:


Band 2: 1920-2200
200
DC-bypass
< -117
131 x 120 x 94
ACOMD2A06v06 570

Band 1: 1710-
All Double Unit:
1755&2110-2155/ 300
DC-bypass
< -110
185 x 180 x 103
ACOMD2A00v06 573
Band 2: 1850-1995

Band 1: 1427-2200/ 1427~2200MHz Double Unit:


Band 2: 2300-2690
200
DC-bypass
< -117
122 x 125 x 98
ACOMD2L13v06 576

Band 1: 1427-2200/ 2300-2690MHz Double Unit:


Band 2: 2300-2690
200
DC-bypass
< -117
122 x 125 x 98
ACOMD2H27v06 576

Band 1: 1427-2200/ All Double Unit:


Band 2: 2300-2690
200
DC-bypass
< -117
122 x 125 x 98
ACOMD2A08v06 576

Band 1: 1427-2200/ Smart Double Unit:


Band 2: 2300-2690
200
DC-bypass
< -117
122 x 125 x 111
ACOMD2S03v06 579

547
Product
Category
Max. Input Intermodulation
Category Pass Band(MHz) DC-Bypass Dimension (mm) Model Page
power(W) (dBm)

Band 1: 690-960/
All Double Unit:
Band 2: 1710-1880/ 300
DC-bypass
< -110
190 x 154 x 105
ACOMT2A03v06 582
Band 3: 1920-2200

Band 1: 690-960/
All Double Unit:
Band 2: 1710-2200/ 300
DC-bypass
< -110
196 x 190 x 112
ACOMT2A04v06 585
Band 3: 2300-2690

Band 1: 790-862/
All Double Unit:
Band 2: 880-960/ 300
DC-bypass
< -110
220 x 210 x 115
ACOMT2A02v06 588
Band 3: 1710-2700

Band 1: 790-960/
1920~2200MHz Double Unit:
Band 2: 1710-1880/ 300
DC-bypass
< -110
190 x 154 x 105
ACOMT2H01v06 591
Band 3: 1920-2200
Tri-band
Combiner 1710~1880MHz
Band 1: 790-960/
DC-bypass Double Unit:
Band 2: 1710-1880/ 300
1920~2200MHz
< -110
190 x 154 x 105
ACOMT2H03v06 591
Band 3: 1920-2200
DC-bypass

Band 1: 790-960/
ALL Double Unit:
Band 2: 1710-1880/ 300
DC-bypass
< -110
190 x 154 x 105
ACOMT2H08v06 591
Band 3: 1920-2200

Band 1: 1710-1880/
1920~2200MHz Double Unit:
Band 2: 1920-2200/ 300
DC-bypass
< -110
165 x 180 x 105
ACOMT2M02v06 594
Band 3: 2300-2690

Band 1: 690-960/
All Double Unit:
Band 2: 1710-2200/ 300
DC-bypass
< -110
165 x 180 x 105
ACOMT2A07v06 594
Band 3: 2300-2690

Band 1: 690-960/
Band 2: 1710-1880/ 1920~2200MHz Double Unit:
Band 3: 1920-2200/
300
DC-bypass
< -110
230 x 220 x 112
ACOMQ2M01v06 597
Band 4: 2300-2690

Band 1: 690-960/
Quad-band Band 2: 1710-1880/ All Double Unit:
Combiner Band 3: 1920-2200/
300
DC-bypass
< -110
230 x 220 x 112
ACOMQ2A01v06 597
Band 4: 2300-2690

Band 1: 690-862/
Band 2: 880-960/ All Double Unit:
Band 3: 1427-1880/
200
DC-bypass
< -117
310 x 190 x 129
ACOMQ2A03v06 600
Band 4: 1920-2690

548
Product
Category
ACOMD2S05v06

DC-690-862/880-960-DS

Product Description

 Smartly select the DC/AISG channel, and the combiner module or the
demultiplexing module is the same module;
 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna;
 Support for customer-defined configuration with handheld terminal;
 Designed for co-location purposes;
 Feeder sharing available;
 Built-in lightning protection up to 10 kA;
 Suitable for indoor or outdoor applications.
 Wall or pole mounting.

Block Diagram

ACOMD2S05v06

549
Product Product
List Category
ACOMD2S05v06

DC-690-862/880-960-DS

Electrical Properties

Model ACOMD2S05v06

Band 1 690 - 862


Pass band (MHz)
Band 2 880- 960

Port 1 ←→ Port 3 < 0.2 (690 MHz - 862 MHz)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.25 (880 MHz - 960 MHz)

DC/AISG Port 1 ←→ Port 3 Smart bypass (max. 2000 mA)


transparency Port 2 ←→ Port 3 Smart bypass (max. 2000 mA)

Isolation (dB) > 50

VSWR < 1.25

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

EMC EN 55032:2015, EN 55035:2017

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification

Double Unit: 101 x 194 x 143


Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 380 x 160 x 240

Combiner weight (kg) Double Unit: ≤ 5.5

Packing weight (kg) ≤6

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Function Specification

Mode choice Combine and split mode automatically selected

Smart DC/AISG bypass DC/AISG input channel automatically selected

Load detection Output load automatically detected

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4

550
Product Product
List Category
ACOMD2S05v06

DC-690-862/880-960-DS

Unit : mm

551
Product Product
List Category
ACOMD2A07v07 DC-690-862/880-960-11
ACOMD2L11v07 DC-690-862/880-960-10
ACOMD2H25v07 DC-690-862/880-960-01

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or Pole mounting.

Block Diagram

ACOMD2L11v07 ACOMD2H25v07 ACOMD2A07v06

552
Product Product
List Category
ACOMD2A07v07 DC-690-862/880-960-11
ACOMD2L11v07 DC-690-862/880-960-10
ACOMD2H25v07 DC-690-862/880-960-01

Electrical Properties

Model ACOMD2A07v07 ACOMD2L11v07 ACOMD2H25v07

Band 1 690 - 862


Pass band (MHz)
Band 2 880 - 960

Port 1 ←→ Port 3 < 0.15 (690 MHz - 862 MHz)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.20 (880 MHz - 960 MHz)

Port 1 ←→ Port 3 By- pass (max. 2500 mA) By- pass (max. 2500 mA) stop
DC/AISG
transparency
Port 2 ←→ Port 3 By- pass (max. 2500 mA) stop By- pass (max. 2500 mA)

Isolation (dB) > 50

VSWR < 1.25

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 180 x 165 x 110
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 335 x 235 x 205

Combiner weight (kg) Double Unit: ≤ 4.7

Packing weight (kg) ≤ 5.5

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

*Insertion loss: IL* = Sum(v1 + v2 + ....


+ vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
calculate using the following formula: Min.Frequency Mid.Frequency Max. Frequency
IL =
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.

553
Product Product
List Category
ACOMD2A07v07 DC-690-862/880-960-11
ACOMD2L11v07 DC-690-862/880-960-10
ACOMD2H25v07 DC-690-862/880-960-01

If the sign as shown above, it


■ indicates this pass band is DC
pass.

If the sign as shown above, it


indicates this pass band is DC
stop.

180.0
40.0 140.0
M8
192.0

214.0

248.0

84.6±0.5

Unit : mm

554
Product Product
List Category
ACOMD2L08v06

DC-690-803/824-960-10

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMD2L08v06

555
Product Product
List Category
ACOMD2L08v06

DC-690-803/824-960-10

Electrical Properties

Model ACOMD2L08v06

Band 1 690 - 803


Pass band (MHz)
Band 2 824 - 960

Port 1 ←→ Port 3 < 0.20 (690 MHz - 803 MHz)


Insertion loss *(dB)
Port 2 ←→ Port 3 < 0.20 (824 MHz - 960 MHz)

Port 1 ←→ Port 3 By-pass (max. 2500 mA)


DC/AISG
transparency
Port 2 ←→ Port 3 Stop

Isolation (dB) > 49.0

VSWR < 1.22

Input power (W) Port 1, Port 2 < 300

Intermodulation products (dBc) < -155 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 200 x 230 x 107
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 335 x 405 x 265

Combiner weight (kg) Double Unit: ≤ 7.9

Packing weight (kg) ≤ 9.4

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

556
Product Product
List Category
ACOMD2L08v06

DC-690-803/824-960-10

M8

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

557
Product Product
List Category
ACOMD2H11v06

DC-698-960/1710-2200-01

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMD2H11v06

558
Product Product
List Category
ACOMD2H11v06

DC-698-960/1710-2200-01

Electrical Properties

Model ACOMD2H11v06

Band 1 698 - 960


Pass band (MHz)
Band 2 1710 - 2200

Port 1 ←→ Port 3 < 0.15 (698 MHz - 960 MHz)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.15 (1710 MHz - 2200 MHz)

Port 1 ←→ Port 3 Stop


DC/AISG
transparency
Port 2 ←→ Port 3 By-pass (max. 2500 mA)

Isolation (dB) > 40

VSWR < 1.25

Input power (W) Port 1, Port 2 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 130 x 190 x 105
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 175 x 355 x 220

Combiner weight (kg) Double Unit: ≤ 5.6

Packing weight (kg) ≤ 6.2

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
calculate using the following formula: IL = Min.Frequency Mid.Frequency Max. Frequency
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

559
Product Product
List Category
ACOMD2H11v06

DC-698-960/1710-2200-01

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

560
Product Product
List Category
ACOMD2H19v06

DC-698-960/1710-2200-11

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMD2H19v06

561
Product Product
List Category
ACOMD2H19v06

DC-698-960/1710-2200-11

Electrical Properties

Model ACOMD2H19v06

Band 1 698 - 960


Pass band (MHz)
Band 2 1710 - 2200

Port 1 ←→ Port 3 < 0.15 (698 MHz - 960 MHz)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.15 (1710 MHz - 2200 MHz)

Port 1 ←→ Port 3 By-pass (max. 2500 mA)


DC/AISG
transparency
Port 2 ←→ Port 3 By-pass (max. 2500 mA)

Isolation (dB) > 40

VSWR < 1.25

Input power (W) Port 1, Port 2 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 130 x 190 x 105
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 175 x 355 x 220

Combiner weight (kg) Double Unit: ≤ 5.6

Packing weight (kg) ≤ 6.2

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

562
Product Product
List Category
ACOMD2H19v06

DC-698-960/1710-2200-11

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

563
Product Product
List Category
ACOMD2H00v06 DC-698-960/1710-2700-01

ACOMD2H22v06 DC-698-960/1710-2700-11

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMD2H00v06 ACOMD2H22v06

564
Product Product
List Category
ACOMD2H00v06 DC-698-960/1710-2700-01

ACOMD2H22v06 DC-698-960/1710-2700-11

Electrical Properties

Model ACOMD2H00v06 ACOMD2H22v06

Band 1 698 - 960


Pass band (MHz)
Band 2 1710 - 2700

Port 1 ←→ Port
< 0.15 (698 MHz - 960 MHz)
3
Insertion loss* (dB)
Port 2 ←→ Port
< 0.15 (1710 MHz - 2700 MHz)
3
Port 1 ←→ Port
Stop By-pass (max. 2500 mA)
DC/AISG 3
transparency Port 2 ←→ Port
By-pass (max. 2500 mA) By-pass (max. 2500 mA)
3

Isolation (dB) > 40

VSWR < 1.25

Input power (W) Port 1, Port 2 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Combiner dimensions (W x H x D) Double Unit: 130 x 190 x 105
(mm) (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 175 x 355 x 220

Combiner weight (kg) Double Unit: ≤ 4.2

Packing weight (kg) ≤ 4.7

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
calculate using the following formula: IL = Min.Frequency Mid.Frequency Max. Frequency
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

565
Product Product
List Category
ACOMD2H00v06 DC-698-960/1710-2700-01

ACOMD2H22v06 DC-698-960/1710-2700-11

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

566
Product Product
List Category
ACOMD2S02v06

DC-1427-1880/1920-2200-DS

Product Description

 Built-in lightning protection up to 10 kA;


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna;
 Automatically recognizes the port DC / AISG, and the combiner module or the
demultiplexing module is the same module;
 Support for customer-defined configuration with handheld terminal;
 Designed for co-location purposes;
 Feeder sharing available;
 Suitable for indoor or outdoor applications.

Block Diagram

ACOMD2S02v06

567
Product Product
List Category
ACOMD2S02v06

DC-1427-1880/1920-2200-DS

Electrical Properties

Model ACOMD2S02v06

Band 1 1427 - 1880


Pass band (MHz)
Band 2 1920 - 2200

Port 1 ←→ Port 3 < 0.15


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.15

DC/AISG Port 1 ←→ Port 3 Smart-bypass (max. 2000 mA)


transparency Port 2 ←→ Port 3 Smart-bypass (max. 2000 mA)

Isolation (dB) Port 1 ←→ Port 2 > 50

VSWR < 1.25

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

EMC EN 55032:2015, EN 55035:2017

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 131 x 120 x 109
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 185 x 280 x 195

Combiner weight (kg) Double Unit: ≤ 3.6

Packing weight (kg) ≤ 4.8

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Function Specification

Mode choice Combine and split mode automatically selected

Smart DC/AISG bypass DC/AISG input channel automatically selected

Load detection Output load automatically detected

*Insertion loss: IL* = Sum(v1 + v2 + ....


+ vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4

568
Product Product
List Category
ACOMD2S02v06

DC-1427-1880/1920-2200-DS

Unit : mm

569
Product Product
List Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near
the antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or Pole mounting.

Block Diagram

ACOMD2L12v06 ACOMD2H26v06 ACOMD2A06v06

570
Product Product
List Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01

Electrical Properties

Model ACOMD2A06v06 ACOMD2L12v06 ACOMD2H26v06

Band 1 1427 - 1880


Pass band (MHz)
Band 2 1920 - 2200

Port 1 ←→ Port 3 < 0.15 (1427 MHz - 1880 MHz)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.15 (1920 MHz - 2200 MHz)

Port 1 ←→ Port 3 By- pass (max. 2500 mA) By- pass (max. 2500 mA) stop
DC/AISG
transparency
Port 2 ←→ Port 3 By- pass (max. 2500 mA) stop By- pass (max. 2500 mA)

Isolation (dB) > 50

VSWR < 1.25

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 131 x 120 x 99
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 280 x185 x 195

Combiner weight (kg) Double Unit: ≤ 3.2

Packing weight (kg) ≤ 4.0

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
calculate using the following formula: IL = Min.Frequency Mid.Frequency Max. Frequency
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.

571
Product Product
List Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01

■ If the sign as shown above, it


indicates this pass band is DC
pass.

If the sign as shown above, it


indicates this pass band is DC
stop.

131.0 M8
129.0
46.0
142.0

164.0

198.0

84.6

Unit : mm

572
Product Product
List Category
ACOMD2A00v06

DC-1710-1755&2110-2155/1850-1995-11

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMD2A00v06

573
Product Product
List Category
ACOMD2A00v06

DC-1710-1755&2110-2155/1850-1995-11

Electrical Properties

Model ACOMD2A00v06

Band 1 (AWS) 1710 - 1755 & 2110 - 2155


Pass band (MHz)
Band 2 (PCS) 1850 -1995

Port 1 ←→ Port 3 < 0.1 (1710 MHz - 1755 MHz & 2110 MHz - 2155 MHz)
Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.2 (1850 MHz - 1995 MHz)

Port 1 ←→ Port 3 By - pass (max. 2500 mA)


DC/AISG
transparency
Port 2 ←→ Port 3 By - pass (max. 2500 mA)

Isolation (dB) > 35

VSWR < 1.25

Input power (W) Port 1, Port 2 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 185 x 180 x 103
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 260 x 380 x 215

Combiner weight (kg) Double Unit: ≤ 6.8

Packing weight (kg) ≤ 7.7

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
calculate using the following formula: IL = Min.Frequency Mid.Frequency Max. Frequency
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.

574
Product Product
List Category
ACOMD2A00v06

DC-1710-1755&2110-2155/1850-1995-11

M6

If the sign as shown


above, it indicates this
pass band is DC by-pass.

If the sign as shown


above, it indicates this
pass band is DC stop.

Unit : mm

575
Product Product
List Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or Pole mounting.

Block Diagram

ACOMD2A08v06 ACOMD2L13v06 ACOMD2H27v06

576
Product Product
List Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01

Electrical Properties
Model ACOMD2A08v06 ACOMD2L13v06 ACOMD2H27v06

Band 1 1427 - 2200


Pass band (MHz)
Band 2 2300 - 2690

Port 1 ←→ Port 3 < 0.15 (1427 MHz - 2200 MHz)


Insertion loss*
(dB)
Port 2 ←→ Port 3 < 0.15 (2300 MHz - 2690 MHz)

Port 1 ←→ Port 3 By- pass (max. 2500 mA) By- pass (max. 2500 mA) stop
DC/AISG
transparency By- pass (max. 2500
Port 2 ←→ Port 3 By- pass (max. 2500 mA) stop
mA)

Isolation (dB) > 50

VSWR < 1.25

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification

Double Unit: 131 x 125 x 103


Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 280 x185 x 195

Combiner weight (kg) Double Unit: ≤ 3.1

Packing weight (kg) ≤ 3.5

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = ,V1,V2…Vn-1 is the IL-value for each 5M in the passband from low frequency, Vn is the
n
IL + 2 × IL + IL
IL-value for high frequency. If n < 4, Min.Frequency Mid.Frequency Max. Frequency
IL =
4

**Lightning protection: In normal instance, the combiner share the GND protection systems with feeders and no need another GND
cable.

577
Product Product
List Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01

■ If the sign as shown above, it


indicates this pass band is DC pass.

If the sign as shown above, it


indicates this pass band is DC
stop.

131.0
2-46.0 M8 133.0
149.0±2.0

171.0

205.0

84.6

Unit : mm

578
Product Product
List Category
ACOMD2S03v06

DC-1427-2200/2300-2690-DS

Product Description

 Built-in lightning protection up to 10 kA;


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna;
 Automatically recognizes the port DC / AISG, and the combiner module or the
demultiplexing module is the same module;
 Support for customer-defined configuration with handheld terminal;
 Designed for co-location purposes;
 Feeder sharing available;
 Suitable for indoor or outdoor applications.

Block Diagram

ACOMD2S03v06

579
Product Product
List Category
ACOMD2S03v06

DC-1427-2200/2300-2690-DS

Electrical Properties

Model ACOMD2S03v06

Band 1 1427 - 2200


Pass band (MHz)
Band 2 2300 - 2690

Port 1 ←→ Port 3 < 0.15 (1427 - 2200)


Insertion loss* (dB)
Port 2 ←→ Port 3 < 0.15 (2300 - 2690)

DC/AISG Port 1 ←→ Port 3 Smart-bypass (max. 2000 mA)


transparency Port 2 ←→ Port 3 Smart-bypass (max. 2000 mA)

Isolation (dB) Port 1 ←→ Port 2 > 50

VSWR < 1.28

Input power (W) Port 1, Port 2 < 200

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification

Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

EMC EN 55032:2015, EN 55035:2017

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 122 x 125 x 113
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 185 x 280 x 195

Combiner weight (kg) Double Unit: ≤ 3.5

Packing weight (kg) ≤ 4.8

Mounting Wall mounting // Pole mounting

Pole diameter (mm) 40 - 135

Connector 6 x 4.3-10 Female

Function Specification

Mode choice Combine and split mode automatically selected

Smart DC/AISG bypass DC/AISG input channel automatically selected

Load detection Output load automatically detected

*Insertion loss: IL* = Sum(v1 + v2 + ....


+ vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4

580
Product Product
List Category
ACOMD2S03v06

DC-1427-2200/2300-2690-DS

Unit : mm

581
Product Product
List Category
ACOMT2A03v06

TC-690-960/1710-1880/1920-2200-111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

Port4
DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port1 Port2 Port3


690 - 960 1710 - 1880 1920 - 2200

ACOMT2A03v06

582
Product Product
List Category
ACOMT2A03v06

TC-690-960/1710-1880/1920-2200-111

Electrical Properties
Model ACOMT2A03v06

Band 1 690 - 960

Pass band (MHz) Band 2 1710 - 1880

Band 3 1920 - 2200

Port 1 ←→ Port 4 < 0.1 (690 MHz - 960 MHz)

Insertion loss* (dB) Port 2 ←→ Port 4 < 0.2 (1710 MHz - 1880 MHz)

Port 3 ←→ Port 4 < 0.15 (1920 MHz - 2200 MHz)

Port 1 ←→ Port 4 By-pass (max. 2500 mA)


DC/AISG
Port 2 ←→ Port 4 By-pass (max. 2500 mA)
transparency
Port 3 ←→ Port 4 By-pass (max. 2500 mA)

Isolation (dB) > 45

VSWR < 1.25

Input power (W) Port 1, Port 2, Port3 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 190 x 154 x 105
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 245 x 330 x 220

Combiner weight (kg) Double Unit: ≤ 7.0

Packing weight (kg) ≤ 7.9

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 8 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

583
Product Product
List Category
ACOMT2A03v06

TC-690-960/1710-1880/1920-2200-111

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

584
Product Product
List Category
ACOMT2A04v06

TC-690-960/1710-2200/2300-2690-111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

Port4
DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port1 Port2 Port3


690 - 960 1710 - 2200 2300 - 2690

ACOMT2A04v06

585
Product Product
List Category
ACOMT2A04v06

TC-690-960/1710-2200/2300-2690-111

Electrical Properties
Model ACOMT2A04v06

Band 1 690 - 960

Pass band (MHz) Band 2 1710 - 2200

Band 3 2300 - 2690

Port 1 ←→ Port 4 < 0.1 (690 MHz - 960 MHz)

Insertion loss* (dB) Port 2 ←→ Port 4 < 0.15 (1710 MHz - 2200 MHz)

Port 3 ←→ Port 4 < 0.1 (2300 MHz - 2690 MHz)

Port 1 ←→ Port 4 By-pass (max. 2500 mA)


DC/AISG
Port 2 ←→ Port 4 By-pass (max. 2500 mA)
transparency
Port 3 ←→ Port 4 By-pass (max. 2500 mA)

Isolation (dB) > 45

VSWR < 1.25

Input power (W) Port 1, Port 2, Port3 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 196 x 190 x 112
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm) 335 x 405 x 265

Combiner weight (kg) Double Unit: ≤ 7.0

Packing weight (kg) ≤ 7.9

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 8 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

586
Product Product
List Category
ACOMT2A04v06

TC-690-960/1710-2200/2300-2690-111

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

587
Product Product
List Category
ACOMT2A02v06

TC-790-862/880-960/1710-2700-111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

Port4
DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port1 Port2 Port3


790 - 862 880 - 960 1710 - 2700

ACOMT2A02v06

588
Product Product
List Category
ACOMT2A02v06

TC-790-862/880-960/1710-2700-111

Electrical Properties
Model ACOMT2A02v06

Band 1 790 - 862

Pass band (MHz) Band 2 880 - 960

Band 3 1710 - 2700

Port 1 ←→ Port 4 < 0.25 (790 MHz - 862 MHz)

Insertion loss* (dB) Port 2 ←→ Port 4 < 0.25 (880 MHz - 960 MHz)

Port 3 ←→ Port 4 < 0.1 (1710 MHz - 2700 MHz)

Port 1 ←→ Port 4 By-pass (max. 2500 mA)


DC/AISG
Port 2 ←→ Port 4 By-pass (max. 2500 mA)
transparency
Port 3 ←→ Port 4 By-pass (max. 2500 mA)

Port 1 ←→ Port 2 > 47

Isolation (dB) Port 2 ←→ Port 3 > 50

Port 1 ←→ Port 3 > 50

VSWR < 1.25

Input power (W) Port 1, Port 2, Port3 < 300

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 220 x 210 x 115
Dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 335 x 405 x 265

Combiner weight (kg) Double Unit: ≤ 7.5

Packing weight (kg) ≤ 8.4

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 8 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

589
Product Product
List Category
ACOMT2A02v06

TC-790-862/880-960/1710-2700-111

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

590
Product Product
List Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMT2H01v06 ACOMT2H03v06 ACOMT2H08v06

591
Product Product
List Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111

Electrical Properties
Model ACOMT2H01v06 ACOMT2H03v06 ACOMT2H08v06

Band 1 790 - 960

Pass band (MHz) Band 2 1710 - 1880

Band 3 1920 - 2200

Port 1 ←→ Port 4 < 0.15 (790 MHz - 960 MHz)

Insertion loss* (dB) Port 2 ←→ Port 4 < 0.25 (1710 MHz - 1880 MHz)

Port 3 ←→ Port 4 < 0.25 (1920 MHz - 2200 MHz)

Port 1 ←→ Port 4 Stop Stop By-pass (max. 2500 mA)


DC/AISG
Port 2 ←→ Port 4 Stop By-pass (max. 2500 mA) By-pass (max. 2500 mA)
transparency
Port 3 ←→ Port 4 By-pass (max. 2500 mA) By-pass (max. 2500 mA) By-pass (max. 2500 mA)

Isolation (dB) > 45

VSWR < 1.25

Port 1, Port 2,
Input power (W) < 300
Port3

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 190 x 154 x 105
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 245 x 330 x 220

Combiner weight (kg) Double Unit: ≤ 5.6

Packing weight (kg) ≤ 6.2

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 8 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

592
Product Product
List Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111

If the sign as shown above,


it indicates this pass band
is DC by-pass.

If the sign as shown above,


it indicates this pass band
is DC stop.

Unit : mm

593
Product Product
List Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010

ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting.

Block Diagram

ACOMT2M02v06 ACOMT2A07v06

594
Product Product
List Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010

ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111

Electrical Properties
Model ACOMT2M02v06 ACOMT2A07v06

Band 1 1710 - 1880

Pass band (MHz) Band 2 1920 - 2200

Band 3 2300 - 2690

Port 1 ←→ Port 4 < 0.2 (1710 MHz - 1880 MHz)

Insertion loss* (dB) Port 2 ←→ Port 4 < 0.2 (1920 MHz - 2200 MHz)

Port 3 ←→ Port 4 < 0.15 (2300 MHz - 2690 MHz)

Port 1 ←→ Port 4 Stop By- pass (max. 2500 mA)


DC/AISG
Port 2 ←→ Port 4 By- pass (max. 2500 mA) By- pass (max. 2500 mA)
transparency
Port 3 ←→ Port 4 Stop By- pass (max. 2500 mA)

Isolation (dB) > 50

VSWR < 1.25

Input power (W) Port 1, Port 2,Port 3 < 300

Intermodulation products (dBc) < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection** (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 165 x 180 x 105
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm) 225 x 380 x 220

Combiner weight (kg) Double Unit: ≤ 5

Packing weight (kg) ≤6

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 8 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

595
Product Product
List Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010

ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111

If the sign as shown above, it If the sign as shown above, it


indicates this pass band is DC stop. indicates this pass band is DC pass.

Unit : mm

596
Product Product
List Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111

ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS or in a reciprocal function near the
antenna.
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or mast mounting

Block Diagram

Port5 Port5
DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port1 Port2 Port3 Port4 Port1 Port2 Port3 Port4


690 - 960 1710 - 1880 1920 - 2200 2300 - 2690 690 - 960 1710 - 1880 1920 - 2200 2300 - 2690

ACOMQ2A01v06 ACOMQ2M01v06

597
Product Product
List Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111

ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010

Electrical Properties
Model ACOMQ2A01v06 ACOMQ2M01v06

Band 1 690 - 960

Band 2 1710 - 1880


Pass band (MHz)
Band 3 1920 - 2200

Band 4 2300 - 2690

Port 1 ←→ Port 5 < 0.15 (690 MHz - 960 MHz)

Port 2 ←→ Port 5 < 0.25 (1710 MHz - 1880 MHz)


Insertion loss* (dB)
Port 3 ←→ Port 5 < 0.25 (1920 MHz - 2200 MHz)

Port 4 ←→ Port 5 < 0.20 (2300 MHz - 2690 MHz)

Port 1 ←→ Port 5 By- pass (max. 2500 mA) Stop

DC/AISG Port 2 ←→ Port 5 By- pass (max. 2500 mA) Stop


transparency Port 3 ←→ Port 5 By- pass (max. 2500 mA) By- pass (max. 2500 mA)

Port 4 ←→ Port 5 By- pass (max. 2500 mA) Stop

Isolation (dB) > 45

VSWR < 1.25

Port 1, Port 2
Input power (W) < 300
Port 3, Port 4

Intermodulation products (dBc) < -153 (3rd order; with 2 x 43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 230 x 220 x 112
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm) 335 x 405 x 265

Combiner weight (kg) Double Unit: ≤ 9

Packing weight (kg) ≤ 10

Mounting Wall mounting // Mast mounting

Mast diameter (mm) 40 - 135

Connector 10 x 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
calculate using the following formula: IL =
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

598
Product Product
List Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111

ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010

If the sign as shown


above, it indicates this
pass band is DC pass.

If the sign as shown


above, it indicates this
pass band is DC stop.

Unit : mm

599
Product Product
List Category
ACOMQ2A03v06

QC-690-862/880-960/1427-1880/1920-2690-1111

Product Description

 Built-in lightning protection up to 10 kA.


 Can be used as a combiner near the BTS
 Can provide anti-interference rejection capability
 Designed for co-location purposes.
 Feeder sharing available.
 Suitable for indoor or outdoor applications.
 Wall or Pole mounting.

Block Diagram

ACOMQ2A03v06

600
Product Product
List Category
ACOMQ2A03v06

QC-690-862/880-960/1427-1880/1920-2690-1111

Electrical Properties
Model ACOMQ2A03v06

Band1 690 – 862

Band2 880 - 960


Pass band (MHz)
Band3 1427 - 1880

Band4 1920 - 2690

Port1 ←→ Port5 < 0.15 (690 - 862MHz)

Port2 ←→ Port5 < 0.2 (880 - 960MHz)


Insertion loss (dB)
Port3 ←→ Port5 < 0.1 (1427 - 1880MHz)

Port 4 ←→ Port5 < 0.2 (1920 - 2690MHz)

Port 1 ←→ Port 5

DC/AISG Port 2 ←→ Port 5


transparency By-pass ( max.2500mA)
Port 3 ←→ Port 5

Port 4 ←→ Port 5

Port 1 ←→ Port 2

Port 1 ←→ Port 3

Port 1 ←→ Port 4
Isolation (dB) > 45
Port 2 ←→ Port 3

Port 2 ←→ Port 4

Port 3 ←→ Port 4
VSWR < 1.25

Input power (W) Port 1, Port 2, Port 3, Port 4 < 200

Intermodulation products (dBc) < -160 (3rd order with 2 x43 dBm)

Environmental Specification
Operating temperature (℃) -40 to +65

Application scene Indoor // Outdoor

IP rating IP67

Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
Double Unit: 310 x 190 x 129
Combiner dimensions (W x H x D) (mm)
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm) 430 x 400 x 260

Combiner weight (kg) Double Unit:≤ 12

Packing weight (kg) ≤ 13

Mounting Wall mounting // Mast mounting

Mast diameter (mm) Default: 40 - 135

Connector 10 x 4.3-10 Female

601
Product Product
List Category
ACOMQ2A03v06

QC-690-862/880-960/1427-1880/1920-2690-1111

Unit : mm

602
Product Product
List Category
E. Bracket & Installation Guide

E-1. ADC Stop


Frequency Range
Weight (Kg) Connector Dimension (mm) Model Page
(MHz)
4.3-10 Male
690–2700 < 0.32
4.3-10 Female
32 x 70.3 x 37 ADCSTOP00v06 605

E-2. Bracket
E - 2 - 1. Tri-sector Bracket

Maximum Width
Bracket Type Weight (Kg) Dimension (mm) Model Page
of Antenna (mm)

TSC-S (3 Sector Clamp-Small) <280 5.8 88.9mm (3.5inch) ASMC00001 607


TSC-M (3 Sector Clamp-Medium) <380 6.3 114.3mm (4.5inch) ASMC00002 607
TSC-L (3 Sector Clamp-Large) <400 6.6 139.7mm (5.5inch) ASMC00003 607
TSC-XL (3 Sector Clamp-Extra Large) <500 15.8 114.3mm (4.5inch) ASMC00004 608
TSC-XL (3 Sector Clamp-Extra Large) <500 16.3 139.7mm (5.5inch) ASMC00005 608

E - 2 - 2. Downtilt Kit

Antenna bases Packing dimensions


Bracket Type Weight(Kg) Model Page
distance (m) (H x W x D) (mm)

Downtilt Kit-A(Wind load Category “Light”) 0.7/1.4/2.0 0.6 260 x 98 x 50 ASMDT0A01 609
Downtilt Kit-B(Wind load Category “Medium”) 0.8/1.4/2.0 1.3 315 x 160 x 105 ASMDT0B01 610
Downtilt Kit-C(Wind load Category “Medium”) 1.4/2.0/2.6 2.1 330 x 160 x 135 ASMDT0C01 611
Downtilt Kit-D(Wind load Category “Heavy”) 1.4/2.0/2.6 2.1 330 x 170 x 135 ASMDT0D01 612
Downtilt Kit-H(Wind load Category “Heavy”) 1.4/2.0/2.6 3.1 360 x 170 x 120 ASMDT0H01 613

603
Product
Category
E. Bracket & Installation Guide
E-2. Bracket
E - 2 - 3. Clamps Kit

Mast diameter supported


Bracket Type Weight(Kg) Model Page
(mm)

Clamps Kit-A 38-115 2.1 ASMC00012 614


Clamps Kit-B 50-115 3.3 ASMC00013 615
Clamps Kit-C 50-115 3.3 ASMC00014 616
Clamps Kit-D 50-115 4.2 ASMC00015 617
Clamps Kit-H 50-115 6.3 ASMC00025 618

E – 2 - 4. Special Installation Kit

Mast diameter Packing dimensions


Bracket Type Weight(Kg) Model Page
supported (mm) (H x W x D) (mm)

Extension Clamps Kit-B for Panel Antennas 110 - 180 4.0 255 x 165 x 120 ASMC00006 619
Extension Clamps Kit-D for Panel Antennas 175-380 8.4 495 x 315 x 140 ASMC00009 620

Antenna Width Azimuth adjustment


Bracket Type Weight(Kg) Model Page
Required range (°)
Wall-mounting Kit-A <400mm 4.3 ±30 ASMWM0001 621

E-3. Installation Guide

Bracket Type Page

Antenna Installation Guide (with Type A Brackets) 622


Antenna Installation Guide (with Type B and Type C Brackets) 626
Antenna Installation Guide (with Type D Brackets) 630
Antenna Installation Guide (with Type H Brackets) 634

604
Product
Category
ADCSTOP00v06

DC-STOP 690-2700

Features

 Used to isolate DC voltage from port 1 to port 2.


 Low passive intermodulation products, low insertion loss and high power
capacity.
 Ultra wide band design for various communication system.
 Small volume, light weight.

Dimension figure

605
Product Product
List Category
ADCSTOP00v06

DC-STOP 690-2700

Electrical Properties

Model ADCSTOP00v06

Frequency range (MHz) 690–2700

≤ 0.1 (690–960 MHz and 1710–2700 MHz)


Insertion loss* (dB) Port 1 ←→ Port 2
≤ 0.15 (960–1710 MHz)

Isolation for DC signal (dB) Port 1 ←→ Port 2 ≥ 70

≤ 1.15 (690–960 MHz and 1710–2700 MHz)


VSWR Port 1, Port 2
≤ 1.2 (960–1710 MHz)

Input power (W) Port 1, Port 2 Avg. ≥ 500 (690–2700 MHz)

RF Impedance (Ω) 50

Intermodulation products (dBc) < –160 (2 x 43 dBm carrier)

Environmental Specification

Operating temperature (℃) –40 to +70

Application scene Indoor or outdoor

IP rating IP66

Lightning protection** (kA) 3 (10/350 us)

Mechanical Specification

32 x 70.3 x 37
BT dimensions (W x H x D) (mm)
(with connectors and ground screw)

Packing dimensions (W x H x D) (mm) 50 x 82 x 50

BT net weight (kg) < 0.32

Packing weight (kg) < 0.45

Port 1 4.3-10 Male


Connectors
Port 2 4.3-10 Female

Sum(v1 + v2 + ....
+ vn)
*Insertion loss: IL* = , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n

passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the
following formula: IL + 2 × IL + IL
Min.Frequency Mid.Frequency Max. Frequency
IL =
4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

606
Product Product
List Category
ASMC00001 ASMC00002 ASMC00003

Tri-sector Clamps

 Suitable for antennas whose widths are less


than 400 mm and bases are installed at both
**D
ends of the antennas.
D

*Wmax
 Adjustment is available together with standard
bracket within antenna package.
 Support the third party customized camouflage
cover. Base

 Not support antennas with brackets of model F


or above. *Wmax: Maximum width of antenna
**D: Distance between mast center
and back of antenna

Tri-sector clamp

Mounting support clamp

Specifications
Model ASMC00001 ASMC00002 ASMC00003
Angle between antennas (°) 120 120 120
Mast diameter (mm) 88.9 114.3 139.7
*Wmax (mm) 280 380 400
Maximum weight of a single antenna
35 35 35
(kg)
**D (mm) 100 113 128
2 x 3 sector clamp 2 x 3 sector clamp 2 x 3 sector clamp
2 x mounting support 2 x mounting support 2 x mounting support
Number of pieces
clamp clamp clamp
6 x connecting plate 6 x connecting plate 6 x connecting plate
Net weight (approx.) (kg) 5.8 6.3 6.6
Packing weight (kg) 7.3 7.8 8.1
Packing dimensions (H x W x D) (mm) 410 x 280 x 160 410 x 280 x 160 410 x 280 x 160
Max. operational wind speed (km/h) 150 150 150
3 sector clamp
Mounting support clamp Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel
Material Connecting plate
Screws
Stainless steel Stainless steel Stainless steel
Nuts

607
Product Product
List Category
ASMC00004 ASMC00005

Extension Tri-sector Clamps

 Suitable for antennas whose widths are less than 500 mm


 Not support mechanical downtilt

*D

**Wmax

*Wmax: Maximum width of antenna


**D: Distance between mast center and back of antenna

Tri-sector clamp

Mounting support clamp Connecting kit

Specifications
Model ASMC00004 ASMC00005
Angle between antennas (°) 120 120
Mast diameter (mm) 114.3 139.7
*Wmax (mm) 500 500
Maximum weight of a single antenna (kg) 55 55
**D (mm) 250 265
2 x Tri- sector clamp 2 x Tri- sector clamp
Number of pieces 2 x mounting support clamp 2 x mounting support clamp
6 x connecting kit 6 x connecting kit
Net weight (approx.) (kg) 15.8 16.3
Packing weight (kg) 16.6 17.1
Packing dimensions (H x W x D) (mm) 580 x 375 x 265 580 x 375 x 265
Max. operational wind speed (km/h) 200 200
3 sector clamp
Mounting support clamp Hot-dip galvanized steel Hot-dip galvanized steel
Material Connecting plate
Screws
Stainless steel Stainless steel
Nuts
Installation Guide
Bracket &

608
Product Product
List Category
ASMDT0A01
Standard Downtilt kit-A for Panel Antennas
(Wind load Category “Light”)

Antenna bases Downtilt angle Net weight Packing Packing dimensions


Material
distance (m) (°) (kg) weight (kg) (H x W x D) (mm)

0.7 0 - 20
Sheet Metal: Hot-dip galvanized steel
1.4 0 - 12 0.6 0.7 260 x 98 x 50
Screws / nuts / washers: Stainless steel
2.0 0- 8

221
190
140

57
76

Unit: mm

NOTE

Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.

609
Product Product
List Category
ASMDT0B01
Standard Downtilt kit-B for Panel Antennas
(Wind load Category “Medium”)

Antenna bases Downtilt angle Net weight Packing Packing dimensions


Material
distance (m) (°) (kg) weight (kg) (H x W x D) (mm)

0.8 0 - 20
Sheet Metal: Hot-dip galvanized steel
1.4 0 - 16 1.3 1.8 315 x 160 x 105
Screws / nuts / washers: Stainless steel
2.0 0 - 12

222

278
178

93

139

Unit: mm

NOTE

Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.

610
Product Product
List Category
ASMDT0C01
Standard Downtilt kit-C for Panel Antennas
(Wind load Category “Medium”)

Antenna bases Downtilt angle Net weight Packing Packing dimensions


Material
distance (m) (°) (kg) weight (kg) (H x W x D) (mm)

1.4 0 - 16
Sheet Metal: Hot-dip galvanized steel
2.0 0 - 12 2.1 2.7 330 x 160 x 135
Screws / nuts / washers: Stainless steel
2.6 0- 8

223
179

294

100
14
2

Unit:
mm

NOTE

Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.

611
Product Product
List Category
ASMDT0D01
Standard Downtilt kit-D for Panel Antennas
(Wind load Category “Heavy”)

Antenna bases Downtilt angle Net weight Packing Packing dimensions


Material
distance (m) (°) (kg) weight (kg) (H x W x D) (mm)

1.4 0 - 16
Sheet Metal: Hot-dip galvanized steel
2.0 0 - 12 2.1 2.7 330 x 170 x 135
Screws / nuts / washers: Stainless steel
2.6 0- 8

224

297
162

94
136

Unit: mm

NOTE

Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.

612
Product Product
List Category
ASMDT0H01
Standard Downtilt kit-H for Panel Antennas
(Wind load Category “Heavy”)

Antenna bases Downtilt angle Net weight Packing Packing dimensions


Material
distance (m) (°) (kg) weight (kg) (H x W x D) (mm)

1.4 0 - 16
Sheet Metal: Hot-dip galvanized steel
2.0 0 - 12 3.1 3.7 360 x 170 x 120
Screws / nuts / washers: Stainless steel
2.6 0- 8

249

327
180

106
150

NOTE

Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.

613
Product Product
List Category
ASMC00012
Clamps Kit-A for Panel Antennas

Type Number of pieces Mast diameter supported Weight Material

All parts: Hot-dip galvanized steel


Clamps Kit-A 2 clamps 38 - 115 mm Approx 2.1 kg
Bolts / nuts / washers: Stainless steel

Unit: mm

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

614
Product Product
List Category
ASMC00013
Clamps Kit-B for Panel Antennas

Type Number of pieces Mast diameter supported Weight Material

All parts: Hot-dip galvanized steel


Clamps Kit-B 2 clamps 50 - 115 mm Approx 3.3 kg
Bolts / nuts / washers: Stainless steel

Unit: mm

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

615
Product Product
List Category
ASMC00014
Clamps Kit-C for Panel Antennas

Type Number of pieces Mast diameter supported Weight Material

All parts: Hot-dip galvanized steel


Clamps Kit-C 2 clamps 50 - 115 mm Approx 3.3 kg
Bolts / nuts / washers: Stainless steel

Unit: mm

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

616
Product Product
List Category
ASMC00015
Clamps Kit-D for Panel Antennas

Type Number of pieces Mast diameter supported Weight Material

All parts: Hot-dip galvanized steel


Clamps Kit-D 2 clamps 50 - 115 mm Approx 4.2 kg
Bolts / nuts / washers: Stainless steel

Unit: mm

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

617
Product Product
List Category
ASMC00025
Clamps Kit-H for Panel Antennas

Type Number of pieces Mast diameter supported Weight Material

All parts: Hot-dip galvanized steel


Clamps Kit-H 2 clamps 50 - 115 mm Approx 6.3 kg
Bolts / nuts / washers: Stainless steel

The distance is 68mm for


M8 bolt installation.
The distance is 106mm
for M10 bolt installation.

Unit: mm

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

618
Product Product
List Category
ASMC00006

Extension Clamps Kit-B for Panel Antennas

Mast diameter Net weight Packing weight Packing dimensions


Material
supported (mm) (kg) (kg) (H x W x D) (mm)

All parts: Hot-dip galvanized steel


110 - 180 3.7 4.0 255 x 165 x 120
Bolts / nuts / washers: Stainless steel

68

4-Φ9 The expand interface

20
for Clamps Kit-F
110.5
50

70
160
194
The expand interface 2-Φ6.5 2-Φ9 The expand interface for
for Clamps Kit-A Clamps Kit-B , Clamps Kit-
C and Clamps Kit-D

35
68 Unit: mm
22
8

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

619
Product Product
List Category
ASMC00009

Extension Clamps Kit-D for Panel Antennas

Mast diameter Net weight Packing weight Packing dimensions


Material
supported (mm) (kg) (kg) (H x W x D) (mm)

All parts: Hot-dip galvanized steel


175 - 380 8.4 9.5 495 x 315 x 140
Bolts / nuts / washers: Stainless steel

112
2-Φ11
68

4-Φ9 The expand interface for

20
Clamps Kit-F
150 50

155
280

2-Φ6.5 2-Φ9 The expand interface for


The expand interface Clamps Kit-B , Clamps Kit-
for Clamps Kit-A C and Clamps Kit-D

35
68
Unit: mm
396
450

2 pieces

NOTE

1. Clamps kit must be combined with corresponding models of clamp for antenna installation.
2. Installation must follow the antenna installation guide within antenna package.

620
Product Product
List Category
ASMWM0001

Wall-mounting Kit-A Hardware

 Suitable for all panels with an antenna housing width (Wmax) less than 400 mm.
 Not support antennas with brackets of model F or above.

Wall Mounting Hardware


Azimuth adjustment range (°) ±30

Wmax (mm) 400

Maximum weight of antenna


35
(kg)

Number of pieces 2

Weight (kg) 4.3

Sheet Metal Hot-dip galvanized steel

Material Screws
Stainless steel
Nuts

Ø12

Angular: 0° Angular: 30°


Unit: mm

NOTE
The expansion bolts for concrete wall mounting are provided, other wall mounting screws are not supplied, they
must be chosen by installer according to the mounting condition.

621
Product Product
List Category
Antenna with Type A Brackets Installation Guide

Installation Tools Clamps Downtilt kit (Optional)

Torque wrench

13 mm combination M8 (2 PCS) (2 PCS) (1 PCS)


Inclinometer wrench (2 PCS) (4 PCS)

Installation without Downtilt Kit

a Assemble the Clamps

2 PCS 2 PCS

b Install the Clamps

The installation torque is 18 N·m (M8).

The same installation method applies to


both upper and lower brackets.

c Install the antenna

Check and tighten all the nuts


using a torque wrench when
the installation is complete.
The installation torque is 18
N·m (M8).

The same installation method applies to both upper and


lower brackets.
Check and tighten all the nuts when the installation is
complete. The installation torque is 18 N·m (M8).

622
Product Product
List Category
Installation with Downtilt Kit

a Assemble the bracket

Assemble the lower bracket

2 PCS 2 PCS

Disassemble clamps and downtilt kit .

The packaging box


contains two clamps.
Just need disassemble
one of them.

Assemble the upper bracket

To avoid installation interference, assemble


brackets in the directions shown in the
preceding figure. Tighten the nuts Protrusion

Protrusion

To avoid installation interference, assemble


brackets in the directions shown in the
preceding figure. Tighten the nuts

623
Product Product
List Category
b Install the bracket

Follow the directions shown in the following figure to install The same installation method applies to
brackets. Tighten the nuts. The installation torque is 18 N·m (M8). both upper and lower brackets.

Turn the downtilt kit to 0 degree, and tighten the three screws as shown in the figure. The installation torque is 18 N·m (M8).

c Install the antenna

Tighten all the nuts


before lifting the antenna
onto the tower. Ensure
the bracket is fully folded.

The same installation method applies to both upper and


lower brackets. Install and tighten the nuts. The installation
torque is 18 N·m (M8).

d Adjust the mechanical downtilt

Loosen all the nuts as shown in the figure to adjust the downtilt.

Upper bracket Lower bracket

624
Product Product
List Category
Adjust the mechanical downtilt.

Method 1: Using a scale plate Scale plate Example of


a scale plate
The scale plates may
The letter "L" on the scale plate indicates the
vary with different
distance between antenna bases. Determine

L
types of downtilt kit.
the value that is closest to the actual distance.
The scale plate shown
If the distance is approximately 1.4 m, observe
in the right figure is
the readings corresponding to "L=1.4 m".
only for reference.

Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.

Method 2: Using an inclinometer Tighten the


upper bracket

Before the adjustment, adjust the inclinometer


to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.

Method 2 is used to precisely adjust the


mechanical tilt.
Tighten the
lower bracket

After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 18 N·m (M8).

625
Product Product
List Category
Antenna with Type B&C Brackets Installation Guide

Installation Tools Clamps Downtilt kit (Optional)

(1 PCS)

13 mm combination
wrench (2 PCS)
(2 PCS)

(1 PCS)
Inclinometer
16 mm combination
wrench (2 PCS) ASMDT0B01
or

ASMDT0C01
M10 M10 M8
(4 PCS) (2 PCS) (4 PCS) (1 PCS) (1 PCS)
Torque wrench

Installation without Downtilt Kit

a Assemble the Clamps

Follow the directions shown in the Assemble two clamps.


following figure to assemble the
clamps.

Ensure that the protrusion,


if any, is on the same
side as the bolt head.

b Install the Clamps

M8
Base

Align the bolt with the mounting hole on the clamp and determine the
Install bolts on the antenna base. The bolt model according to the position of the mounting hole. Replace the
same installation method applies to both bolt if the bolt model is incorrect. Then, install and tighten the flat
upper and lower bases. washer, spring washer and nut.

Follow the directions shown in the following


figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).

626
Product Product
List Category
c Install the antenna

Check and tighten all the nuts using a torque


wrench when the installation is complete. The
installation torque is 40 N·m (M10).

The same installation method applies to


both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 40 N·m (M10).

Installation with Downtilt Kit

a Assemble the bracket

Assemble the lower bracket Disassemble clamps and downtilt kit .

Assemble the upper bracket

Protrusion

To avoid installation interference, tighten the nuts.


Assemble brackets in the directions shown in the preceding figure.

Protrusion

To avoid installation interference, tighten the nuts.


Assemble brackets in the directions shown in the preceding figure.

627
Product Product
List Category
b Install the bracket

The same installation method applies to both


upper and lower brackets.

Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 40 N·m (M10).

c Install the antenna

Tighten all the nuts before


lifting the antenna onto
the tower. Ensure the
bracket is fully folded.

The same installation method applies to both upper and


lower brackets. Install and tighten the nuts. The
installation torque is 40 N·m (M10).

d Adjust the mechanical downtilt

Loosen all the nuts as shown in the figure to adjust the downtilt.

Upper bracket Lower bracket

628
Product Product
List Category
Adjust the mechanical downtilt.

Method 1: Using a scale plate Scale plate Example of


a scale plate
The scale plates may
The letter "L" on the scale plate indicates the
vary with different
distance between antenna bases. Determine

L
types of downtilt kit.
the value that is closest to the actual distance.
The scale plate shown
If the distance is approximately 1.4 m, observe
in the right figure is
the readings corresponding to "L=1.4 m".
only for reference.

Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.

Method 2: Using an inclinometer Tighten the


upper bracket

Before the adjustment, adjust the inclinometer


to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.

Method 2 is used to precisely adjust the


mechanical tilt.
Tighten the
lower bracket

After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 40 N·m (M10).

629
Product Product
List Category
Antenna with Type D Brackets Installation Guide

Installation Tools Clamps Downtilt kit (Optional)

(1 PCS)

13 mm combination
wrench (1 PCS)
(2 PCS)
(1 PCS)

Inclinometer
16 mm combination
wrench (2 PCS) ASMDT0D01
(1 PCS)

M10x150 M8 M10 x 110


(1 PCS) (1 PCS)
Torque wrench (4 PCS) (4 PCS)

Installation without Downtilt Kit

a Assemble the Clamps

Follow the directions shown in the Assemble two clamps.


following figure to assemble the
clamps.

Ensure that the protrusion,


if any, is on the same
side as the bolt head.

b Install the Clamps

M8
Base

Align the bolt with the mounting hole on the clamp and determine the
Install bolts on the antenna base. The bolt model according to the position of the mounting hole. Replace the
same installation method applies to both bolt if the bolt model is incorrect. Then, install and tighten the flat
upper and lower bases. washer, spring washer and nut.

Follow the directions shown in the following


figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).

630
Product Product
List Category
c Install the antenna

Check and tighten all the nuts using a torque


wrench when the installation is complete. The
installation torque is 40 N·m (M10).

The same installation method applies to


both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 40 N·m (M10).

Installation with Downtilt Kit

a Assemble the bracket

Assemble the lower bracket Disassemble clamps and downtilt kit .

Assemble the upper bracket

Protrusion

To avoid installation interference,


assemble brackets in the directions shown Tighten the nuts
in the preceding figure.

Protrusion

To avoid installation interference, assemble


brackets in the directions shown in the
Tighten the nuts
preceding figure.

631
Product Product
List Category
b Install the bracket

The same installation method applies to both


upper and lower brackets.

Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 40 N·m (M10).

c Install the antenna

Tighten all the nuts before


lifting the antenna onto
the tower. Ensure the
bracket is fully folded.

The same installation method applies to both upper and


lower brackets. Install and tighten the nuts. The
installation torque is 40 N·m (M10).

d Adjust the mechanical downtilt

Loosen all the nuts as shown in the figure to adjust the downtilt.

Upper bracket Lower bracket

632
Product Product
List Category
Adjust the mechanical downtilt.

Method 1: Using a scale plate Scale plate Example of


a scale plate
The scale plates may
The letter "L" on the scale plate indicates the
vary with different
distance between antenna bases. Determine

L
types of downtilt kit.
the value that is closest to the actual distance.
The scale plate shown
If the distance is approximately 1.4 m, observe
in the right figure is
the readings corresponding to "L=1.4 m".
only for reference.

Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.

Method 2: Using an inclinometer Tighten the


upper bracket

Before the adjustment, adjust the inclinometer


to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.

Method 2 is used to precisely adjust the


mechanical tilt.
Tighten the
lower bracket

After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 40 N·m (M10).

633
Product Product
List Category
Antenna with Type H Brackets Installation Guide

Installation Tools Clamps Downtilt kit (Optional)

(1 PCS)

13 mm combination
wrench (1 PCS)
(2 PCS) ASMDT0H01
(1 PCS) (1 PCS)
16 mm combination
wrench (1 PCS) Inclinometer

18 mm combination wrench (2 PCS)

M12
M12 M8 M10 (1 PCS)
Torque wrench (4 PCS) (4 PCS) (4 PCS) (1 PCS)

Installation without Downtilt Kit

a Assemble the Clamps

Follow the directions shown in the following figure to Assemble two clamps.
assemble the clamps.

b Install the Clamps

M8
Base

Align the bolt with the mounting hole on the clamp and determine the
Install bolts on the antenna base. The bolt model according to the position of the mounting hole. Replace the
same installation method applies to both bolt if the bolt model is incorrect. Then, install and tighten the flat
upper and lower bases. washer, spring washer and nut.

Follow the directions shown in the following


figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).

634
Product Product
List Category
c Install the antenna

Check and tighten all the nuts using a torque


wrench when the installation is complete. The
installation torque is 50 N·m (M12).

The same installation method applies to


both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 50 N·m (M12).

Installation with Downtilt Kit

a Assemble the bracket

Assemble the lower bracket Disassemble clamps and downtilt kit .

Assemble the upper bracket

Protrusion

To avoid installation interference,


assemble brackets in the directions shown Tighten the nuts
in the preceding figure.

Protrusion

To avoid installation interference, assemble


brackets in the directions shown in the
Tighten the nuts
preceding figure.

635
Product Product
List Category
b Install the bracket

The same installation method applies to both


upper and lower brackets.

Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 50 N·m (M12).

c Install the antenna

Tighten all the nuts before


lifting the antenna onto
the tower. Ensure the
bracket is fully folded.

The same installation method applies to both upper and


lower brackets. Install and tighten the nuts. The
installation torque is 50 N·m (M12).

d Adjust the mechanical downtilt

Loosen all the nuts as shown in the figure to adjust the downtilt.

Upper bracket Lower bracket

636
Product Product
List Category
Adjust the mechanical downtilt.

Method 1: Using a scale plate Scale plate Example of


a scale plate
The scale plates may
The letter "L" on the scale plate indicates the
vary with different
distance between antenna bases. Determine

L
types of downtilt kit.
the value that is closest to the actual distance.
The scale plate shown
If the distance is approximately 1.4 m, observe
in the right figure is
the readings corresponding to "L=1.4 m".
only for reference.

Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.

Method 2: Using an inclinometer Tighten the


upper bracket

Before the adjustment, adjust the inclinometer


to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.

Method 2 is used to precisely adjust the


mechanical tilt.
Tighten the
lower bracket

After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 50 N·m (M12).

637
Product Product
List Category
Huawei Antenna Test Standard

Reference Operation Verification


Test Item Condition Duration
Standard Method Item

Low temperature ETSI 300 019-2-4 IEC 60068-2-1 -55℃ 16h

High
ETSI 300 019-2-4 IEC 60068-2-2 +70℃ 16h
temperature

Temperature
ETSI 300 019-2-4 IEC 60068-2-14 -55ºC/+70ºC 5 cycles,50h
cycle

Humidity ETSI 300 019-2-4 IEC 60068-2-30 +25ºC/+55ºC @ 95% RH 10 cycles, 240h

Simulated constant
Wind load ETSI 300 019-2-4 IEC 721-3-4 3 surfaces, 144h
force of 200 km/h wind

sinusoidal 3 axes×5 sweep


Vibration ETSI 300 019-2-4 IEC 60068-2-6 6.15mm,10m/s , 2-9HZ cycles
2

9HZ-200HZ

Transportation ETSI 300 019-2-4 IEC 60068-2-64 Truck level 3 3 axes, 90min Appearance
inspection;

Shock (without 200 m/s2, 6ms pulse Standing wave,


ETSI 300 019-2-4 IEC 60068-2-27 72s
packing) width insulation, and
intermodulation
before and after
Shock 300 m/s2,6ms pulse the test;
ETSI 300 019-2-2 IEC 60068-2-27 72s
(with packing) width

Drop 3 surfaces*2/ 2 Angles/


ETSI 300 019-2-2 ISO 12048 12 drops
(with packing) 4 Edges

Rain ETSI 300 019-2-4 IEC 60068-2-18 0.067m3/min, 5r/min 2h

MIL-STD-810 150mm/h, 31m/s, 4 surfaces, more


Wind driven rain GR-487-CORE
Method 506.3 0.5mm-4.5mm, 45° than 120min

Salt mist
ETSI 300 019-2-4 IEC 60068-2-11 5% NaCl mist @+40ºC 1000h
(continuous)

24h/cycle,
Solar exposure ETSI 300 019-2-4 IEC 60068-2-5 1120W/s2 @+40ºC
56 days

<150um, 10.8.9m/s,
Sand and dust ETSI 300 019-2-4 IEC 60068-2-68 12h
@25ºC <30%

638
Product
Category
Catalogue Issue 01/2023
Any previous datasheet issues become invalid.
We reserve the right to make alterations in accordance with the requirements of our customers.

Huawei antenna supports NGMN recommendations on Base Station Antenna Standards (BASTA).

The notes of Huawei antenna followed:


• Facilities, such as towers and poles, must bear the weight and wind load of antennas.
• Huawei's standard brackets and accessories must be used for any installation.
• The antenna working environment must meet the requirements specified in the datasheet.
• Only qualified personnel are allowed to perform installation. Installation tools and procedures must
conform to requirements described in the antenna installation guide.

For more antenna information, please visit the following website:


• Huawei Antenna Website: https://carrier.huawei.com/en/products/antenna
• Huawei LinkedIn Website: https://www.linkedin.com/showcase/10554089/admin/

You might also like