Professional Documents
Culture Documents
DESCRIPTION
NCU or “Network Control Unit” is a device that gathers information on the status of a set of TCUs “Tracker Control Unit” and can configure their working parameters
(send them to specific positions such as stow position or cleaning mode or make them work in manual mode).
The NCU is also in constant communication with RSU “Remote Sensor Unit”. When an alarm state detected by the sensors occurs, the RSU identifies it and sends
the information to one or more NCU that modify the position of their TCUs’ set accordingly.
Certified quality
Remote operability
MAIN FEATURES
SCADA monitoring
Configurable software
IP/NEMA: IP 66
POWER SUPPLY
VARISTOR
CIRCUIT
BATTERY 12 V BATTERY 12 V
GATEWAY
ANTENNA
TCP
Each NCU must be connected by an Ethernet cable and RJ45 connector to its internal switch
OTHERS
* The characteristics, information and images shown are for information purposes only, they do not have contractual value and they can differ slightly from final results.