Professional Documents
Culture Documents
USER INSTRUCTIONS EN
2
Thank you for choosing this product. WEEE contains both polluting substances (which
We are proud to offer the ideal product for can cause negative consequences for the
EN
you and the best complete range of home environment) and basic components (which can
appliances for your daily routine. be re-used). It is important to have WEEE
subjected to specific treatments, in order to
remove and dispose properly all pollutants, and
Carefully read this manual for correct and
recover and recycle all materials. Individuals can
safe appliance use and for helpful tips on
play an important role in ensuring that WEEE
efficient maintenance.
does not become an environmental issue; it is
essential to follow some basic rules:
l WEEE should not be treated as household
waste;
Only use the washing machine after
carefully reading these instructions. We l WEEE should be handed over to the relevant
recommend you always keep this manual on collection points managed by the municipality or
hand and in good condition for any future by registered companies. In many countries, for
owners. large WEEE, home collection could be present.
In many countries, when you buy a new
appliance, the old one may be returned to the
FOR U.K. ONLY retailer who has to collect it free of charge on a
On receipt of your appliance please one-to-one basis, as long as the equipment is of
check it carefully for damage. Any equivalent type and has the same functions as
damage found must be reported the supplied equipment.
to the delivery driver immediately.
Alternatively damage found must be
reported to the retailer within 30 days Contents
of receipt.
1. GENERAL SAFETY RULES
2. INSTALLATION
Each product is identified by a unique 16-
character code, also called the “serial 3. DETERGENT DRAWER
number”, printed on the sticker. This can be 4. PRACTICAL HINTS
found inside the door opening. This code is
a unique code for your product that you will 5. CLEANING AND MAINTENANCE
need to register the product warranty, or if
you need to contact the Customer Service 6. QUICK USER GUIDE
Centre. 7. CONTROLS AND PROGRAMS
8. TROUBLESHOOTING AND WARRANTY
Environmental conditions
This appliance is marked according to
the European directive 2012/19/EU
on Waste Electrical and Electronic
Equipment (WEEE).
3
1. GENERAL SAFETY in a safe way and understand the
RULES hazards involved.
Children shall not play with the
l This appliance is intended to appliance. Cleaning and user
be used in household and maintenance shall not be made
similar applications such as: by children without supervision.
- Staff kitchen areas in shops, offices
and other working environments; l Children should be supervised
- Farm houses; to ensure that they do not play
- By clients in hotels, motels and with the appliance.
l Children of less than 3 years
other residential type environments;
- Bed and breakfast type environments. should be kept away unless
A different use of this appliance continuously supervised.
from household environment l If the supply cord is damaged, it
or from typical housekeeping must be replaced by a special
functions, as commercial use by cord or assembly available from
expert or trained users, is excluded the manufacturer or its service
even in the above applications. If agent.
the appliance is used in a manner
l Only use the hose-sets
inconsistent with this it may reduce supplied with the appliance for
the life of the appliance and may
the water supply connection
void the manufacturer’s warranty. (do not reuse old hose-sets).
Any damage to the appliance or
other damage or loss arising l Water pressure must be between
through use that is not consistent 0.05 MPa and 0.8 MPa.
with domestic or household use l Make sure carpets or rugs do
(even if located in a domestic or not obstruct the base or any of
household environment) shall not the ventilation openings.
be accepted by the manufacturer to
l After installation, the appliance
the fullest extent permitted by law.
must be positioned so that the
l This appliance can be used by plug is accessible.
children aged from 8 years and
l The maximum load capacity of
above and persons with reduced dry clothes depends on the
physical, sensory or mental
model used (see control panel).
capabilities or lack of experience
and knowledge if they have been l To consult the product technical
given supervision or instruction specification please refer to the
concerning use of the appliance manufacturer website.
4
Electrical connections and l Donot expose the washing
safety instructions machine to rain, direct sunlight
or other weather elements.
EN
l The technical details (supply Protect from possible freezing.
voltage and power input) are
indicated on the product rating l When moving, do not lift the
plate washing machine by the knobs
or detergent drawer; during
l Make sure that the electrical transport, never rest the door on
system is earthed, complies the trolley. We recommend two
with all applicable law and that people lift the washing machine.
the (electricity) socket is
compatible with the plug of the l In the event of fault and/or
appliance. Otherwise, seek malfunction, turn off the
qualified professional assistance. washing machine, close the
water tap and do not tamper
l The use of converters, multiple
with the appliance.
sockets or extension cords is
Immediately contact the
strongly advised against
Customer Service Centre and
l Before cleaning or maintaining
only use original spare parts.
the washing machine, unplug Failure to observe these
the appliance and turn off the instruction may jeopardise
water tap. appliance safety.
5
2. INSTALLATION
l Remove the 2 or 4 transportation 1
screws (A) on the back and
remove the 2 or 4 flat washers, A A
B
rubber bungs and plastic spacer B A
tubes (B) as illustrated in figure 1. A
B B
l If the washing machine is built-in,
unscrew the 3 or 4 transportation
screws (A) and remove the 3 or 4
flat washers, rubber bungs and
plastic spacer tubes (B).
l During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering them from the floor or
inside the base of the machine.
l Cover the open transportation screw 2
holes with the 2 or 4 plastic caps
A
included in the instruction bag. 3
1 2
WARNING:
keep packaging materials
away from children.
l Place the corrugated plastic sheet,
B
found on top of the appliance during
the unpacking process, into the base
of the appliance as shown in figure 2
(according to the model, consider
version A, B or C).
In some models this operation
will not be necessary, because C
the corrugated plastic sheet
will be already placed on the 3
bottom of the appliance. 2 1
6
Instructions for mounting the
furniture door
EN
l Position the template onto the
reverse of the furniture door. It
is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions.
B
C
A
l Fix the hinges in place with the
4 screws provided (A).
7
l Mount the furniture door to the
front of the washer using the
hinges. Fix the spacers (I) in
place with the 2 screws (J) and I
then fix the hinges with 2 screw J
H
(H).
825 min.
of the appliance, but its height will
820 min.
59
6 570
l The 4 adjustable feet allow the
height of the washer to be
adjusted from 820 mm to a
maximum of 840 mm. To adjust
the height, you should remove
the nuts fitted to each foot and
replace these with the 5 mm
nuts supplied. Raise the feet to
your desired height and then
fully tighten the lock nut to the
base of the washer.
8
Hydraulic connections 3
EN
supply tap (fig. 3) only using the hose
supplied with the appliance (do not
reuse old hose-sets).
4
l HOT&COLD (fig. 4):
water mains connection settings with hot
and cold water for higher energy savings. 1
Connect the grey tube to the cold water
tap and the red one to the hot water
tap. The machine can be connected to
the cold water tap only: in this case, some
programs may start a few minutes later.
5
l AQUASTOP (fig. 5):
a device located on the supply tube that
stops water flow if the tube deteriorates; B
in this case, a red mark will appear in the
window “A” and the tube must be
replaced. To unscrew the nut, press the A
one-way lock device "B".
9
Setting 7
l The washing machine should be installed in
its final position such that the water fill hose
is not kinked or trapped. The corrugated
drain hose should be inserted into suitable
drain pipe of between 50 cm and 85 cm
height above the floor using the curved drain
hose support. If an under sink connection is
used the drain hose must be routed above
the sink overfill opening to prevent back
siphoning. Care must be taken to avoid
min 4 cm
kinking or trapping the drain hose (fig. 7).
max 100 cm
l Level the appliance using the feet as
2,5 mt
illustrated in figure 8:
max min 50 cm
a. turn the nut clockwise to release the max 85 cm
screw;
b. rotate the foot to raise or lower it until it * ACCESSORY SOLD SEPARATELY
touches to the floor;
c. lock the foot, screwing in the nut, until it 8
tightens against to the bottom of the
washing machine.
WARNING: B
contact the Customer Service Centre
should the power cord need
replacement.
Installation faults are not covered by
the manufacturers warranty.
C
10
3. DETERGENT DRAWER
WARNING:
The detergent draw is split into 3 some detergents are not designed for
EN
compartments as illustrated in figure 9: use in the dispenser drawer but are
supplied with their own dispenser that
l compartment "1": for prewash detergent;
is placed in the drum directly.
l compartment “ ”: for special additives,
softeners, starch fragrances, etc.;
9
WARNING: 1
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last 2
rinse.
11
4. PRACTICAL HINTS Maximise the load size
l Achieve the best use of energy, water,
Load tips detergent and time by using the
recommended maximum load size.
When sorting laundry, make sure: Save up to 50% energy by washing a full
load instead of 2 half loads.
- have eliminated metallic objects such as
hair clips, pins, coins, from laundry;
Do you need to pre-wash?
- to have buttoned pillow cases, closed l For heavily soiled laundry only!
zips, tied loose belts and long robe SAVE detergent, time, water and
ribbons; between 5 to 15% energy consumption
- to have removed rollers, hooks or clips by NOT selecting Prewash for slight to
from curtains; normally soiled laundry.
12
The use of ecological detergents without
When washing heavily soiled whites, phosphates may cause the following
we recommend using cotton programs of effects:
60°C or above and a normal washing
EN
powder (heavy duty) that contains
- cloudier rinse drain water: This effect is
bleaching agents that at medium/high
tied to the suspended zeolites which do
temperatures provide excellent results.
not have negative effects on rinse
efficiency.
For washes between 40°C and 60°C
the type of detergent used needs to be - white powder (zeolites) on laundry at
appropriate for the type of fabric and the end of the wash: this is normal, the
level of soiling. Normal powders are powder is not absorbed by fabric and does
suitable for “white” or colour fast fabrics not change its colour.
with high soiling, while liquid detergents To remove the zeolites, select a rinse
or “colour protecting” powders are programme. In the future consider using
suitable for coloured fabrics with light slightly less detergent.
levels of soiling.
- foam in the water at last rinse: this does
not necessary indicate poor rinsing.
For washing at temperatures below Consider using less detergent in future
40°C we recommend the use of liquid washes.
detergents or detergents specifically
labeled as suitable for low temperature
washing. - abundant foam: This is often due to the
anionic surfactants found in the detergents
which are hard to eliminate from laundry.
For washing wool or silk, only use In this case, do not re-rinse to eliminate
detergents specifically formulated for these effects: it will not help at all.
these fabrics. We suggest conducting a maintenance
wash using a proprietary cleaner.
l Too much detergent leads to excessive
foam, which prevents the cycle being If the problem persists or if you suspect a
carried out correctly. It could also affect malfunction, immediately contact an
the quality of the washing and rinsing. Authorised Customer Service Centre.
13
5. CLEANING AND l Remove and clean the filter; when
finished, replace it turning it clockwise.
MAINTENANCE The filter handle will be locked when it is
Looking after your appliance correctly can not possible to turn any further and the
extend its lifespan. handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
Cleaning the appliance’s exterior
l Repeat the previous steps in reverse
l Disconnect the machine from the power order to reassemble all parts.
supply.
l Clean the appliance’s external cabinet,
using a damp cloth and AVOIDING
ABRASIVES, ALCOHOL AND/OR
DILUENTS.
Drawer cleaning
l It is advisable to regularly clean the
detergent drawer to avoid the
accumulation of detergent and additive
residues.
We recommend checking and cleaning l Detach the tube from the drainage system
the filter 5 or 6 times a year. and clip on the rear of the machine and
lower it, fully draining water into a bowl.
l Disconnect the machine from the power
supply. l Secure the drain tube with the drainage
system and clip on the rear of the
l Ensure all the water has been emptied machine when finished.
from the drum.
l Before unscrewing the filter, we l Keep the door glass and gasket clean.
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
l Turn the filter counter-clockwise to the
limit stop.
14
6. QUICK USER GUIDE 7. CONTROLS AND
This washing machine automatically adjusts PROGRAMS
EN
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
A
Program selection
15
Opening the door l Press to start the selected cycle.
A special safety device prevents the When the START/PAUSE button has
door from being opened immediately been pressed, the appliance can take
after the end of the cycle. few seconds before it starts working.
Wait for 2 minutes after the wash
cycle has finished and the "Door
Security" light has gone out before PAUSING THE MACHINE
opening the door. l Keep the START/PAUSE button pressed
for about 2 seconds (some light indicators
and the residual time display will flash,
PROGRAMME selector with OFF showing that the machine is paused).
position
For safety reasons, in some wash
cycle phases, the door can be opened
When the programme selector is turned
the display lights up to show the settings only if the level of the water is below
for the programme selected. its lower edge and if the temperature
For energy saving, at the end of the is less than 45°C. If these conditions
cycle or with an inactivity period, the are met, wait for the DOOR LOCKED
display level contrast will decrease. light to switch off before opening the
door.
N.B.: To switch the machine off, turn
the programme selector to the OFF l Press the START/PAUSE button again to
position. re-start the programme from the point it
had been paused at.
l Press the START/PAUSE button to start
the selected cycle. CANCELLING THE PROGRAMME
16
time the button is pressed, until h24 - EASY IRON
appears on the display, at which point
This function allows you to minimizes
pressing the button again will reset the
creases as much as possible, eliminating
EN
delay start to zero.
the intermediate spins or reducing the
- Confirm by pressing the START/PAUSE intensity of the last one.
button. The delay countdown will begin
and when it has finished the programme If an option is selected that is not
will start automatically. compatible with the selected
programme then the option indicator
l It is possible to cancel the delay start by light first flashes and then goes off.
turning the programme selector to OFF.
l This option allows you to add one rinse at l This option allows you to choose between
the end of the washing cycle and is useful 3 levels of wash intensity modifying the
for people with delicate and sensitive length of the programme, depending on
skin, for which a small amount of how much the fabrics are soiled (can only
detergent residue can cause irritations or be used on some programmes as shown
allergies. in the table of programmes).
17
SPIN SPEED button l The key lock can be simply cancelled by
pressing the two buttons simultaneously
l By pressing this button, it is possible to again or turning off the appliance.
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
Digital Display
l If the label does not indicate specific
information, it is possible to use the The display’s indicator system allows you to
maximum spin expected in the program. be constantly informed about the status of
the machine.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the 1 2 3 4 6 7
programme.
18
l When START/PAUSE is pressed on - adjusts the spin speed according to the
the machine with the door closed, the load, thus avoiding any imbalance.
indicator will flash momentarily and then
EN
illuminate.
5) KEY LOCK INDICATOR LIGHT
If the door is not properly closed, The indicator light show that the keys are
the light will continue to flash for locked.
about 7 seconds, after which the
start command will be automatically 6) WASH TEMPERATURE INDICATOR
cancelled. In this case, close the LIGHTS
door in the proper way and press
the START/PAUSE button. This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
l A special safety device prevents the door If you want carry out a cold wash all the
from being opened immediately after the
indicators must be off.
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before 7) SPIN SPEED INDICATOR LIGHTS
opening the door. At the end of the cycle
turn the programme selector to OFF. This show the spin speed of the selected
programme, you can reduce or omit by the
relevant button.
4) Kg LOAD INDICATOR LIGHT (function
active only on Cotton and Synthetics
programmes)
l During the first minutes of the cycle, the
"Kg LOAD" indicator will remain on while
the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
19
Table of programmes
1)
(MAX.) *
1
2
(see control panel)
PROGRAMME
(MAX.) 2 1
2)
Whites 6 7 8 9 90°
2)
Cottons + Prewash 6 7 8 9 60°
2)
ECO 40-60 6 7 8 9 60°
20°C 6 7 8 9 20°
2)
Mixed 3 3,5 4 4,5 60°
Rinse - - - - -
Spin - - - - -
Drain - - - - -
3)
Rapid 30' 2 2,5 2,5 2,5 30°
Silk 1 1 2 2 30°
Wool 1 1 2 2 30°
Handwash 1 1 2 2 30°
20
Please read these notes:
INFORMATION FOR THE TEST
* Maximum load capacity of dry clothes,
EN
LABORATORIES
according to the model used (see control
panel).
STANDARD PROGRAMMES
1) When a programme is selected, ACCORDING TO
on the display is shown the (EU) No 1015/2010 e No 1061/2010
display shows the recommended
wash temperature that can be ECO 40-60 PROGRAMME
reduced (where allowed) by the SETTING THE TEMPERATURE TO
relevant button. 40°C
ECO 40-60 PROGRAMME
2) For the programmes shown you
SETTING THE TEMPERATURE TO
can adjust the duration and
60°C
intensity of the wash using the ________________________________________
STAIN LEVEL button.
STANDARD PROGRAMME
3) Selecting the RAPID program on ACCORDING TO
the knob, it will be possible to (EU) No 2019/2023
select with the RAPID button, one
of the three rapid programs ECO 40-60 PROGRAMME
available among 14’, 30’ and 44’.
21
Programmes selection Rinse
This program performs 3 rinses with an
intermediate spin (which can be reduced or
To clean different types of fabrics and
excluded by using the appropriate button) . It
various levels of dirt, the washing machine
is used for rinsing any type of fabric, for
has specific programs to meet every need
example after a wash carried out by hand.
of washing (see table of programmes).
Spin
Whites Programme "SPIN" carries out a maximum
An intensive wash. The final spin at spin (which can be reduced by using the
maximum speed gives more efficient correct button).
removal.
Drain
Cottons + Prewash This programme drains out the water.
This programme has been designed to
remove the stronger stains from cotton Rapid (14'-30'-44')
white clothes. The prewash guarantees the Washing cycle suggested for low loads and
tough dirt removal. Add into compartment slightly dirty. With this program it is
"1" a quantity of detergent equal to 20% of recommended to reduce the quantity of
that used for main wash. detergent normally used, in order to avoid
unnecessary waste. Selecting the RAPID
ECO 40-60 program and acting on the button you can
The ECO 40-60 programme is able to clean choose one of three programs available.
normally soiled cotton laundry declared to Dark Colours
be washable at 40°C or 60°C, together in Program designed to mix all dark garments
the same cycle. This programme is used and to avoid the loss of colour and the
to assess the compliance with the EU formation of creases. We recommend the
Ecodesign legislation (environmentally use of liquid detergent.
friendly products design).
Shirts
20°C The washing cycle is optimized to reduce
This innovative programme, allows you to the creation of creases, keeping an
wash different fabrics and colours together, excellent washing performance. It is also
such as cottons, synthetics and mixed possible to further reduce the spin speed, to
fabrics at only 20°C and provides an ensure an easier ironing.
excellent cleaning performance.
Consumption on this program is about 40% Silk
of a conventional 40°C cottons wash. Dedicated program for silk fabrics that can
be wash with a washing machine washable.
Mixed The rotations of the drum are delicate, the
The washing and rinsing optimise the speed temperature does not exceed 30°C and the
and rhythm of the drum action and water program ends with a gentle spin.
levels. The gentle spin, ensures a reduced
formation of creases in the fabric. Wool
This program performs a wash cycle
Delicates dedicated to the wool fabrics that can be
This programme has reduced periods of washed in a washing machine, or the
drum rotation during the cycle and is articles to be washed by hand.
particularly suitable or washing delicate
fabrics. The wash cycle and rinses are Handwash
carried out with a high level of water to Program for hand wash only clothes, the
ensure the best performance. program ends with 3 rinses and a slow spin.
22
8. TROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide
EN
provided below which includes some practical tips on how to fix the most common
problems.
l Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
l Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
23
OTHER ANOMALIES
24
It is always recommended to use original
spare parts, that are available at our By placing the mark on this
product, we are confirming compliance
EN
Authorised Customer Service Centres.
to all relevant European safety, health
Spares and After Care contacts in UK: and environmental requirements which
01204 545495 or are applicable in legislation for this
product.
neueservice@hoovercandy.com
Warranty
The product is guaranteed under the
terms and conditions stated on the
certificate included with the product. The
certificate has to be stored so as to be
shown to the Authorized Customer
Service Centre in case of need. You can The manufacturer declines all
also check the warranty conditions on responsibility for any printing errors in
our web site. To obtain assistance, the booklet included with this product.
please fill in the form on-line or contact Moreover, it also reserves the right to
us at the number indicated on the make any changes deemed useful to its
support page of our web site. products without changing their
essential characteristics.
25
fkhldsk
fkhldsk
20.12 - 41051732.B - IDM s.r.l.