Professional Documents
Culture Documents
2
Thank-you for choosing a Candy washing
machine. We are confident it will loyally Environmental conditions
EN
assist you in safely washing your clothes, This appliance is marked according to
even delicates, day after day. the European directive 2012/19/EU
on Waste Electrical and Electronic
You can register your product at Equipment (WEEE).
www.registercandy.com to gain faster WEEE contains both polluting substances (which
access to supplementary services solely can cause negative consequences for the
reserved to our most loyal customers. environment) and basic components (which can
be re-used). It is important to have WEEE
Carefully read this manual for correct and subjected to specific treatments, in order to
safe appliance use and for helpful tips on remove and dispose properly all pollutants, and
efficient maintenance. recover and recycle all materials. Individuals can
play an important role in ensuring that WEEE
does not become an environmental issue; it is
essential to follow some basic rules:
Only use the washing machine
after carefully reading these instructions. l WEEE should not be treated as household
We recommend you always keep this waste;
manual on hand and in good condition for l WEEE should be handed over to the relevant
any future owners. collection points managed by the municipality or
by registered companies. In many countries, for
Please check that the appliance is large WEEE, home collection could be present.
delivered with this instruction manual, In many countries, when you buy a new
warranty certificate, service centre address appliance, the old one may be returned to the
and energy efficiency label. Also check that retailer who has to collect it free of charge on a
plugs, drain hose support hook and liquid one-to-one basis, as long as the equipment is of
detergent or bleach tray (only on some equivalent type and has the same functions as
models) are included. We recommend you the supplied equipment.
keep all these components.
Contents
On receipt of your appliance please
check it carefully for damage. Any 1. GENERAL SAFETY RULES
damage found must be reported to the
delivery driver immediately. Alternatively 2. INSTALLATION
damage found must be reported to the
3. PRACTICAL TIPS
retailer within 2 days of receipt.
4. MAINTENANCE AND CLEANING
Each product is identified by a unique 16- 5. QUICK USER GUIDE
character code, also called the “serial
number”, printed on the sticker. This can be 6. CONTROLS AND PROGRAMS
found inside the door opening. This code is 7. THROUBLESHOOTING AND WARRANTY
a unique code for your product that you will
need to register the product warranty, or if
you need to contact the Customer Service
Centre.
3
1. GENERAL SAFETY in a safe way and understand the
RULES hazards involved.
Children shall not play with the
l This appliances is intended to appliance. Cleaning and user
be used in household and maintenance shall not be made
similar applications such as: by children without supervision.
- Staff kitchen areas in shops, offices
and other working environments; l Children should be supervised
- Farm houses; to ensure that they do not play
- By clients in hotels, motels and with the appliance.
other residential type environments;
l Childrenof less than 3 years
- Bed and breakfast type environments.
A different use of this appliance should be kept away unless
from household environment continuously supervised.
or from typical housekeeping l If
the supply cord is damaged, it
functions, as commercial use by must be replaced by the
expert or trained users, is excluded manufacturer, its service agent
even in the above applications. If or similarly qualified persons in
the appliance is used in a manner order to avoid a hazard.
inconsistent with this it may reduce
the life of the appliance and may l Only use the hose-sets
void the manufacturer’s warranty. supplied with the appliance for
Any damage to the appliance or the water supply connection
other damage or loss arising (do not reuse old hose-sets).
through use that is not consistent l Waterpressure must be between
with domestic or household use 0.05 MPa and 0.8 MPa.
(even if located in a domestic or
household environment) shall not l Make sure carpets or rugs do
be accepted by the manufacturer to not obstruct the base or any of
the fullest extent permitted by law. the ventilation openings.
l Thisappliance can be used by l The OFF condition is reached
children aged from 8 years and by placing the reference mark on
above and persons with reduced the programmes control/knob in
physical, sensory or mental the vertical position. Any other
capabilities or lack of experience different position of such control
and knowledge if they have been sets the machine in ON condition
given supervision or instruction (only for models with programmes
concerning use of the appliance knob).
4
l After installation, the appliance l Do not expose the washing
must be positioned so that the machine to rain, direct sunlight
EN
plug is accessible. or other weather elements.
Protect from possible freezing.
l The maximum load capacity of
dry clothes depends on the l When moving, do not lift the
model used (see control panel). washing machine by the knobs
l To consult the product technical
or detergent drawer; during
specification please refer to the transport, never rest the door on
manufacturer website. the trolley. We recommend two
people lift the washing machine.
Safety instructions l In the event of fault and/or
malfunction, turn off the
l Before cleaning or maintaining washing machine, close the
the washing machine, unplug water tap and do not tamper
the appliance and turn off the with the appliance.
water tap. Immediately contact the
Customer Service Centre and
l Make sure the electrical system only use original spare parts.
is earthed. Otherwise, seek Failure to observe these
qualified professional assistance. instruction may jeopardise
l Please do not use converters, appliance safety.
multiple sockets or extension
cords.
WARNING:
water may reach very high
temperatures during the
wash cycle.
By placing the mark on this
l Make sure there is no water in product, we are confirming
the drum before opening the
compliance to all relevant
door. European safety, health and
l Do not pull on the power cord environmental requirements which
or appliance to unplug the are applicable in legislation for
machine. this product.
5
2. INSTALLATION
l Release the power chord and 1
drain hose from the securing
clip at the rear of the machine. A A
B
l Remove the 2 or 4 transportation B A
A
screws (A) on the back and B B
remove the 2 or 4 flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
l If the washing machine is built-in,
unscrew the 3 or 4 transportation
screws (A) and remove the 3 or
4 flat washers, rubber bungs and
plastic spacer tubes (B).
l During the removal of the screws
occasionally spacer tubes fall 2
inside the product, these can be A
remove by tilting the product forward 3
and recovering them from the floor 1 2
or inside the base of the machine.
l Cover the open transportation
screw holes with the 2 or 4
plastic caps included in the
B
instruction bag.
WARNING:
keep packaging materials
away from children.
6
Instructions for mounting the
EN
furniture door
A
l Fixthe hinges in place with the
4 screws provided (A).
7
l Mount the furniture door to the
front of the washer using the
hinges. Place the spacers
under the hinges (I) and then
fix in position with screw (H).
H I
We suggest mounting the
furniture door so that it opens
towards the left, which is the
same direction as the porthole
door. This will leave more
space when you are loading
washing into the appliance.
825 min.
washer is set at.
820 min.
600
8
Hydraulic connections 3
l Connect the water hose to the water
EN
supply tap (fig. 3) only using the hose
supplied with the appliance (do not
reuse old hose-sets).
Setting
l The washing machine should be installed
in its final position such that the water fill
hose is not kinked or trapped. The
corrugated drain hose should be inserted
into suitable drain pipe of between 50 cm
and 85 cm height above the floor using min 4 cm
the curved drain hose support. If an under
max 100 cm
9
l Level the appliance using the feet as
illustrated in figure 8: 8
a. turn the nut clockwise to release the
screw;
b. rotate the foot to raise or lower it until it A
touches to the floor;
c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the
washing machine. B
l Plug in the appliance.
WARNING:
contact the Customer Service Centre C
should the power cord need
replacement.
Detergent drawer
9
The detergent draw is split into 3 1
compartments as illustrated in figure 9:
l compartment "1": for prewash detergent;
2
l compartment “ ”: for special additives,
softeners, starch fragrances, etc.;
WARNING:
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last
rinse.
WARNING:
some detergents are not designed for
use in the dispenser drawer but are WARNING:
supplied with their own dispenser that installation faults are not covered by
is placed in the drum directly. the manufacturers warranty.
10
3. PRACTICAL TIPS Is a hot wash required?
l Pretreat stains with stain remover or soak
Load tips
EN
dried in stains in water before washing to
reduce the necessity of a hot wash
programme.
WARNING: when sorting laundry, make Save up to 50% energy by using a 60°C
sure: wash programme.
- have eliminated metallic objects such as Following is a quick guide with tips and
hair clips, pins, coins, from laundry; recommendations on detergent use at the
- to have buttoned pillow cases, closed various temperatures. In any case, always
zips, tied loose belts and long robe read the instructions on the detergent for
ribbons; correct use and doses.
- to have removed rollers, hooks or clips
from curtains;
- to have carefully read clothing washing
labels; When washing heavily soiled whites,
- to have removed any persistent stains we recommend using cotton
using specific detergents. programs of 60°C or above and a
normal washing powder (heavy duty)
that contains bleaching agents that at
l When washing rugs, bedcovers or other
medium/high temperatures provide
heavy clothing, we recommend you avoid
excellent results.
the spinning cycle.
l To wash wool, make sure the item can be
machine washed and marked by the
“Pure virgin wool” symbol with the “Does For washes between 40°C and 60°C
not mat” or “Machine washable” label. the type of detergent used needs to be
appropriate for the type of fabric and
level of soiling.
Helpful suggestions for the user Normal powders are suitable for “white”
or colour fast fabrics with high soiling,
while liquid detergents or “colour
A guide environmentally friendly and protecting” powders are suitable for
economic use of your appliance. coloured fabrics with light levels of
soiling.
Maximise The Load Size
11
4. MAINTENANCE AND l Remove and clean the filter; when
finished, replace it turning it clockwise.
CLEANING The filter handle will be locked when it is
To clean the washing machine exterior, use not possible to turn any further and the
a damp cloth, avoiding abrasives, alcohol handle is horizontal. Smearing a small
and/or solvents. To maintain a good wash amount of liquid soap on the filter seal will
performance we recommend that the soap help refitting.
drawer and pump filters are regularly l Repeat the previous steps in reverse
cleaned. A monthly service wash, using a order to reassemble all parts.
proprietary cleaner is also recommended.
Drawer cleaning
12
5. QUICK USER GUIDE 6. CONTROLS AND
This washing machine automatically adjusts PROGRAMS
EN
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
A
Program selection
13
l Press to start the selected cycle.
Opening the door
When the START/PAUSE button has
A special safety device prevents the been pressed, the appliance can take
door from being opened immediately few seconds before it starts working.
after the end of the cycle.
Wait for 2 minutes after the wash
cycle has finished and the "Door ADD OR REMOVE ITEMS AFTER THE
Security" light has gone out before PROGRAMMES HAS STARTED (PAUSE)
opening the door.
l Press and hold the START/PAUSE
button for about 2 seconds (some
indicator light and the time remaining
PROGRAMME selector with OFF indicator will flash, showing that the
position machine has been paused).
N.B.: To switch the machine off, turn l After you have added or removed items,
the programme selector to the OFF close the door and press the
position. START/PAUSE button (the programme
will start from where it left off).
l Press the START/PAUSE button to start
the selected cycle. CANCELLING THE PROGRAMME
14
time the button is pressed, until h24 - EASY IRON
appears on the display, at which point
This function allows you to minimizes
pressing the button again will reset the
EN
creases as much as possible, eliminating
delay start to zero.
the intermediate spins or reducing the
- Confirm by pressing the START/PAUSE intensity of the last one.
button. The delay countdown will begin
and when it has finished the programme If an option is selected that is not
will start automatically. compatible with the selected
programme then the option indicator
l It is possible to cancel the delay start by light first flashes and then goes off.
turning the programme selector to OFF.
15
SPIN SPEED button l The key lock can be simply cancelled by
pressing the two buttons simultaneously
l By pressing this button, it is possible to again or turning off the appliance.
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
Digital Display
l If the label does not indicate specific
information, it is possible to use the The display’s indicator system allows you to
maximum spin expected in the program. be constantly informed about the status of
the machine.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the 1 2 3 4 6 7
programme.
16
l When START/PAUSE is pressed on - adjusts the spin speed according to the
the machine with the door closed, the load, thus avoiding any imbalance.
indicator will flash momentarily and then
EN
illuminate.
5) KEY LOCK INDICATOR LIGHT
If the door is not properly closed, The indicator light show that the keys are
the light will continue to flash for locked.
about 7 seconds, after which the
start command will be automatically 6) WASH TEMPERATURE INDICATOR
cancelled. In this case, close the LIGHTS
door in the proper way and press
the START/PAUSE button. This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
l A special safety device prevents the door If you want carry out a cold wash all the
from being opened immediately after the
indicators must be off.
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before 7) SPIN SPEED INDICATOR LIGHTS
opening the door. At the end of the cycle
turn the programme selector to OFF. This show the spin speed of the selected
programme, you can reduce or omit by the
relevant button.
4) Kg Detector INDICATOR LIGHT
(function active only on Cotton and
Synthetics programmes)
l During the first minutes of the cycle, the
"Kg Detector" indicator will remain on
while the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
17
Table of programmes
1)
1
(MAX.) *
2
PROGRAMME (see control panel)
(MAX.) 2 1
2)
Whites 6 7 8 9 90°
2)
Cottons + Prewash 6 7 8 9 60°
** 6 7 8 9 60°
2)
Rinse - - - - -
Drain + Spin - - - - -
Silk 1 1 2 2 30°
Wool 1 1 2 2 40°
18
(Only for models with liquid
detergent compartment)
EN
When only a limited number of
articles have stains which require
treatment with liquid bleaching
agents, preliminary removal of
stain can be carried out in the
washing machine.
Pour the bleach into the liquid
bleach container, inserted into the
compartment marked "2" in the
detergent drawer, and set the
Please read these notes: special programme RINSE.
* Maximum load capacity of dry clothes, When this phase has terminated,
according to the model used (see control turn the programme selector to
panel). the OFF position, add the rest of
the fabrics and proceed with a
normal wash on the most suitable
** STANDARD COTTON PROGRAMMES
programme.
ACCORDING TO (EU) No 1015/2010 and
No 1061/2010.
1) When a programme is selected,
COTTON PROGRAMME WITH A
on the display is shown the
TEMPERATURE OF 60°C.
display shows the recommended
COTTON PROGRAMME WITH A wash temperature that can be
TEMPERATURE OF 40°C. reduced (where allowed) by the
relevant button.
These programmes are suitable to
clean normally soiled cotton laundry and
they are the most efficient programmes 2) For the programmes shown you
in terms of combined energy and water can adjust the duration and
consumptions for washing cotton intensity of the wash using the
laundry. STAIN LEVEL button.
These programmes have been
developed to be compliant with the
temperature on the wash label on the 3) Selecting the RAPID program on
garments and the actual water the knob, it will be possible to
temperature may slightly differ from the select with the RAPID button, one
declared temperature of the cycle. of the three rapid programs
available among 14’, 30’ and 44’.
19
Programmes selection program and acting on the button you can
choose one of three programs available.
To clean different types of fabrics and
Rinse
various levels of dirt, the washing machine
This program performs 3 rinses with an
has specific programs to meet every need
intermediate spin (which can be reduced or
of washing (see table of programmes).
excluded by using the appropriate button) . It
Whites is used for rinsing any type of fabric, for
An intensive wash. The final spin at example after a wash carried out by hand.
maximum speed gives more efficient
Drain + Spin
removal.
The program completes the drain and a
Cottons + Prewash maximum spin. It is possible to delete or
This programme has been designed to reduce the spin with the SPIN SPEED
remove the stronger stains from cotton button.
white clothes. The prewash guarantees the
tough dirt removal. Add into compartment Delicates
"1" a quantity of detergent equal to 20% of This program has reduced periods of drum
that used for main wash. rotation during the cycle and is particularly
suitable or washing delicate fabrics. The
EcoMix 20° wash cycle and rinses are carried out with a
This innovative programme, allows you to wash high level of water to ensure the best
different fabrics and colours together, such as performance.
cottons, synthetics and mixed fabrics at only
20°C and provides an excellent cleaning Jeans
performance. Consumption on this program is This program has been designed to have the
about 40% of a conventional 40°C. cottons highest quality cleaning of fabrics such as
wash. denim: ideal for removing dirt without affecting
the elasticity of the fibers.
Cottons
This program is suitable to clean normally soiled Baby Care
cotton laundry and it is the most efficient program This program allows you to wash all baby
in terms of combined energy and water clothes getting a perfect clean and
consumptions for washing cotton laundry. sanitizing effect, setting the temperature at
60°C minimum.
Synthetics To optimize the result of the sanitizing effect
The washing and rinsing optimise the speed we recommend the use of powder detergent.
and rhythm of the drum action and water
levels. The gentle spin, ensures a reduced Silk
formation of creases in the fabric. Dedicated program for silk fabrics that can be
wash with a washing machine washable. The
Daily 59 Min. rotations of the drum are delicate, the
This specially designed programme temperature does not exceed 30°C and the
maintains the high quality wash performance program ends with a gentle spin.
whilst greatly reducing the wash time. The
programme is designed for a reduced load Hand Wash
(see table of programmes). Program for hand wash only clothes, the
program ends with 3 rinses and a slow spin.
Rapid (14/30/44 Min.)
Washing cycle suggested for low loads and Wool
slightly dirty. With this program it is This program performs a wash cycle
recommended to reduce the quantity of dedicated to the wool fabrics that can be
detergent normally used, in order to avoid washed in a washing machine, or the
unnecessary waste. Selecting the RAPID articles to be washed by hand.
20
7. THROUBLESHOOTING AND WARRANTY
EN
If you believe the washing machine is not working correctly, consult the quick guide
provided below which includes some practical tips on how to fix the most common
problems.
l Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
l Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
21
OTHER ANOMALIES
22
The use of ecological detergents without If the problem persists or if you suspect a
phosphates may cause the following effects: malfunction, immediately contact an
EN
Authorised Customer Service Centre.
- cloudier rinse drain water: This effect is
tied to the suspended zeolites which do It is always recommended to use original
not have negative effects on rinse spare parts, that are available at our
efficiency. Authorised Customer Service Centres.
- white powder (zeolites) on laundry at
the end of the wash: this is normal, the
Warranty
powder is not absorbed by fabric and
The product is guaranteed under the
does not change its colour. terms and conditions stated on the
To remove the zeolites, select a rinse certificate included with the product. The
programme. In the future consider using warranty certificate must be duly filled in
slightly less detergent.
and stored, so as to be shown to the
Authorised Customer Service Centre in
- foam in the water at last rinse: this
case of need. Proof of purchase must
does not necessary indicate poor rinsing.
be made available at the time of any
Consider using less detergent in future
warranty related repair.
washes.
23
- CBWM D (6÷9) -
16.08 - 43014630 - Canon Italia - Business Services Channel