Professional Documents
Culture Documents
(NEP)
Name:_______________________________
UUCMS No.____________________________
Section: ____________Batch:___________
Batch In-charge:______________________
1. Draw a rectangle of dimension 200mm x 100mm symmetry along vertical and horizontal axis.
2. Draw Horizontal and Vertical axis line along vertical and horizontal axis.
3. Create a fillet of 20mm radius at the right top and bottom left corners of above rectangle.
4. Create a chamfer of 20mm setback distance at the right bottom and left corners of above rectangle.
6. Create circles in the quadrants formed by Horizontal and Vertical axis line by mirroring.
8. Offset the above pentagon inside by 10mm and Hexagon outside by 10mm.
9. Draw rectangle of dimensions 100mm x 50mm modify it a square of 50mm sides by scaling.
12. Create a elongate slot of 100mm length, 50mm width by drawing a rectangle (100mm x 50mm) and
Sketcher Exercise 2
Sketcher Exercise 4
Part Modelling Exercises
Part Modelling and Generative drafting Exercises
Assembly Modelling and Generative drafting