Professional Documents
Culture Documents
Manual For NEW8210
Manual For NEW8210
Manual For NEW8210
Do not use ethanol and other corrosive liquid to clear the device.
Contents Checklist
The following items should be found inside the box:
1 NEW8210 EFT-POS 1PCS
2 AC Power Supply 1PCS
3 AC Power Cable 1PCS
4 Li-ion Battery 1PCS
5 Thermal paper roll 1PCS
6 Product Manual 1PCS
7 Telephone Cable 1PCS (Optional)
8 Ethernet Cable 1PCS (Optional)
9 Stylus cable 1PCS (Optional)
NEW POS TECHNOLOGY LIMITED
NEW8210 Product manual
NEW POS Technology limited NEW POS Technology limited
Product Introduction
NEW8210 Figure
Stylus pen Lanyard hole
Interface Figure
handle Power Port
RS-232 Port
Parts function description
Paper holder lid: Holding thermal paper roll ( Φ38X57mm)
LAN/PSTN Handle: Pull handle to open the paper holder lid
Port
Top Antenna LCD display: 2.8 inch and 320*240 TFT LCD . Optional signature capture function .
inductive zone Antenna inductive zone:
Back cover
The zone for tapping contactless card
LCD display
Key pad: 10 alphanumeric keys,8 functional keys,1 power switch key.
User smart card slot:
Supporting EMV card with contact surface facing up.
Keypad
Tag Label Magnetic stripe card reader :
ISO7812,1/2 Tracks or 2/3 Tracks or 1/2/3 Tracks, bi-directional swiping with
Barcode
Label the magnetic stripe facing LCD .
Rubber pad: Four pads, anti-vibration/non-slip.
Tag label: Showing model name、rated device parameter.
Band Label
Barcode Label: Indicating device serial number .
Band Label: Indicating the frequency of communication module.
Back cover: Remove the cover to install battery or SIM/UIM/SAM card.
User smart card slot Magnetic stripe card
Power port: It only connects approved power supply for NEW8210.
LED indicator: It indicates the power status of device.
RS-232 port: 1 RS-232(up to 2), output: 5VDC, 500mA .
Top view Back view LAN/PSTN port: An optional communication between LAN Port and PSTN Port.
USB Port: USB communication interface.
Install SIM/UIM
card figure
Note
During loading paper roll, keep the thermal sensitive film of paper (external side of paper
roll) facing the thermal head of printer to ensure normal printing.
After long term printing, keep away from thermal printer head for high temperature.
Keep away from the thermal printer paper cutter for the sharp edge.
* Place the in-store security cameras where PIN-entry keypad is not visible.
* Card holder had better use his/her body and hands to prevent visual observation of PIN-entry
process.