Professional Documents
Culture Documents
TM
Integrity In Partnership
LCP BUILDING PRODUCTS PTE. LTD. LCP BUILDING PRODUCTS PVT. LTD.
CO. No. 200009173 C (CO. No. U28112 TN2004 PTC053236)
No. 6 Gul Circle, Singapore 629562 Old No.6, New No.17, 4th Floor, Viswanathapuram Main
Road, Kodambakkam, Chennai – 600 024, India
Tel: (65) 6865-1550 Fax: (65) 6861-4218
Email: lcp@lcp.sg website: www.lcp.sg Tel: + 91-44 -298 92772 Email: lcpindia@lcpgroup.asia CERT NO. FM 59595
Fax: + 91-44 -298 92772 website: www.lcpindia.com BS EN ISO 9001 : 2008
A member of LCP Group of Companies
LCP BRIDGING TM
FEATURES
Steel purlins & girts are designed to carry load in one
direction, that is perpendicular to the roof plane.
Purlins/Grirts cannot be allowed to deflect from that
line. Bridging is a method of preventing torsion and
increasing the carrying capacity. It helps the purlins
from twisting and to keep it perpendicular to roof plane.
BR125-200 1.0 50 84 30 550 1.13 137 14.01 1.15 3.33 0.5 31.9 10.2 12.9 -0.98 0.98
(also applicable for C/Z100) 1.2 50 84 30 500 1.34 163 16.64 1.37 3.96 0.6 34.8 12.5 18.6 -1.26 1.26
BR225-300 1.0 106 140 30 550 1.58 193 48.33 1.32 6.9 0.53 62.7 11.3 7.69 -1.73 1.73
(also applicable for C/Z175-
C/Z350) 1.2 106 140 30 500 1.89 231 57.57 1.57 8.22 0.63 68.4 13.9 13.3 -2.26 2.26
BR350-400 1.5 165 199 52 450 3.56 442 237.9 9.94 23.91 2.35 75.6 43.4 18.3 -4.95 4.95
(also applicable for C/Z250)
Shaded types are non standard bridging. *1.2m length Compression Capacity.
INSTALLATION
Bridging can be installed up the slope of the roof, starting with fascia bridging, then all intermediate bridging. Then
install the ridge bridging to pull the purlins straight, and finally adjust the fascia bridging to correct fascia purlin twist.
Alternatively, install the ridge bridging and straighten the ridge purlins, then install the immediate bridging to the fascia.
Fix and adjust the fascia bridging for straightness and twist.
Note that on steep roofs or where long bridging runs are used, the turn-buckles used for the ridge bridging are not
intended to pull straight a large number of sagging purlins.
Similarly, care should be taken when girts are used on high wall, whereby long intermediate bridging members are not
subjected to an excessive compressive load.
IMPORTANT NOTE: The information published in this brochure is as far as possible accurate at the date of publication, however, prior to application in a particular situation, LCP Building Products Pte. Ltd. recommends
that you obtain qualified expert advice confirming the suitability of product(s) in question for the application proposed. While LCP Building Products Pte. Ltd. accepts its legal obligations, be aware however that
to the extent permitted by law, LCP Building Products Pte. Ltd. disclaims all liability (including liability for negligence) for all losses and damages resulting from the use of the information provided in this brochure.
Photographs of the premises displayed in this Brochure are not to be construed as an endorsement or recommendation by the owners of the premises to LCP and its products.
LCP BRIDGINGTM Brochure 11/18 ©2018 LCP Building Products Pte. Ltd. All rights reserved. LCP BRIDGINGTM Brochure 11.2018 edition.