Professional Documents
Culture Documents
KINGFLEX 20
The single arch type rubber flexible joint
SK-10
Compliance with the
specification of
Ministry of Land,
pursuing the highest performance level eco-Products
Infrastructure,
Transport and Tourism
Feature Structure
Optimum for high pressure lines L
The highest bursting and operating pressure resistance is achieved by aramid ② ④ ③ ⑥ ⑤ ①
fiber and flat reinforcing rings.
Rupture Maximum allowable Negative
pressure working pressure pressure
MPa(kgf/cm2) MPa(kgf/cm2) MPa(mmHg)
150mm and below 9.8(100)or more 2.5(25.5) −0.086(−650)
200mm or more 7.8(80)or more 2.0(20.4) −0.086(−650)
φd
Low reaction force
Little variation in both axial and circumferential dimension when under
pressure, so reaction force loading on equipment are reduced.
Quality control system by production lot numbers
Manufactured under a thorough quality control designated for high pressure
application.
No. Parts Material No. Parts Material
Operating Conditions and Performance ① Flange SS400 ④ Outer Rubber EPDM(SK10)
Temp.[℃] ② Reinforcing Ring SS400 ⑤ Reinforcing cord Aramid fiber
● Use after confirmation that ③ Inner Rubber EPDM(SK10) ⑥ Reinforcing cord Synthesized fiber
80
the maximum operation
60 pressure and maximum Standard JIS20K
service temperature are Flange × JIS5K
40 200mm~300mm Flange
within the operation range. compatible standard × JIS10K
20 32mm~150mm dimension can be × PN16
changed to ANSI
×
0
Standard SS400
−20
Flange × FCD450
−0.086 0 0.5 1.0 1.5 2.0 2.5 Material material × SUS304
{−650mmHg} {5.1}{10.2}{15.3}{20.4}{25.5} can be × SUS316
Pressure[MPa] changed to
{kgf/c㎡} × PVC
This brochure may be revised without prior notice. We apologize in advance for any inconvenience this may cause.
Agent