Professional Documents
Culture Documents
Zigbee IR Blaster - Product Specification
Zigbee IR Blaster - Product Specification
FUNCTIONS
Weight: ~ 35g±5%
(the above dimension and weight do not include the external Power supply)
TECHNICAL SPECIFICATIONS
Power Supply 5V DC (power adaptor is included 100-240VAC (50/60Hz))
3x AAA (1.5V) batteries (battery is not included)
Product Package IR Blaster , external power adaptor (with multiple AC plug- A,C,G ) ,
user manual and safety sheet
Infra-red Range <10 meters
Infra-red transmit angle 360o (horizontal) + 180o (vertical)
Mounting Method Screws
RF Protocol Zigbee 3.0 (operate as a Zigbee router)
Radio Frequency 2.4GHz
Maximum RF Power <10dBm
RF distance 80 meters
* RF distance would be affected by specific material, such as mirror,
metal, or high power electronic devices
IR codes storage Support up to 1800 commands (include AV and AC type)
IR learn mode Support 100 learned commands
Operating Temperature 0⁰C - 50⁰C
Relative Humidity 5% - 95%
Environment usage Indoor use
IP degree of protection IP20
Dimensions (1) Main unit: 70mm x 70mm x 18mm
(2) Bottom Chassis:70mm x 70mm x 15.5mm
Weight ~ 35g
DECRIPTION OF USE
INSTALLATION
Step 1: Configure Zigbee IR Blaster as a Zigbee router and enter it into pairing mode
1. Make sure the product is at factory default setting.
2. Make sure it is not powered by battery and connect it to the USB 5V power supply.
3. The green LED blinks every second, indicating that it is in pairing mode.
Step 2: Pair to Gateway
1. Set the gateway (TaHoma Bee) in device pairing mode.
2. [Configuration -> Add > Zigbee device]
3. Scan the QR code on the product label at the back of IR blaster.
4. Rename the new Zigbee IR Blaster.
5. Check if the “Zigbee IR Blaster” icon exists in the TaHoma Bee app Home page.
Step 3: place/mount the product
1. This product can be placed on a flat surface (such as a table) or mounted to a wall.
DECRIPTION OF USE
BATTYER INSTALLATION
A) China Certification
(1) Safety – China CCC Certification (External Power Supply)
(2) AC plug – GB 2099.1-2008
(2) RF Spectrum – Not required as RF power <10mW.
(3) Environment – China RoHS
(4) Enterprise Standard / Production Standard – Q/YP 001-2018
(B) CE Certification
(1) Safety (CB) – IEC/EN62368-1
(2) RF Spectrum – EN300 328
(3) EMC – EN301 489-1, EN301 489-17, EN55032, EN55024, EN61000-3-2, EN61000-3-3,
EN55035
(4) RF Exposure – EN62479
(5) ErP – EN50564
(6) Environment – RoHS 2.0, REACH, WEEE (2011/65/EU. 2012/19/EU)