Professional Documents
Culture Documents
FEATURES:
• Simple Design RETURN SPRING
• Easy to Maintain DISCHARGE
CHECK VALVE
• Intrinsic Safety of Pneumatic Operation STROKE
• Stroke Length and Stroke Rate Adjustment ADJUSTER
• High Flow Turndown
• Corrosion Resistant Construction
• All 316 SS or PTFE Wetted Parts DIAPHRAGM
• Ease of Installation
• Recommended for discharge pressures
below 120 PSI FACE PLATE
STANDARD MATERIALS:
• Wetted Parts - 316SS or PTFE
• Pneumatic Section - 316SS SUCTION MOTOR
• Diaphragm - PTFE CHECK VALVE CHAMBER
• Controller - 316SS
• Relays - 316SS
OPERATING CYCLE
POWER STROKE: As the air or gas enters the MOTOR CHAMBER from the controller, the DIAPHRAGM is driven into the fluid
cavity of the FACEPLATE, displacing the fluid in the FACEPLATE and extending the RETURN SPRING. As the fluid is displaced, the rise
in pressure closes the SUCTION CHECK VALVE and opens the DISCHARGE CHECK VALVE. A precise amount of fluid corresponding to
the stroke of the DIAPHRAGM is discharged.
SUCTION STROKE: When the air or gas pressure is exhausted from the MOTOR CHAMBER, the RETURN SPRING assists the
DIAPHRAGM in returning to its static position.The retraction of the DIAPHRAGM reduces the pressure in the fluid cavity, thus closing
the DISCHARGE CHECK VALVE and opening the SUCTION CHECK VALVE. The fluid cavity is again filled, preparing the pump for another
power stroke.
PERFORMANCE SPECIFICATIONS
MAX FLOW RATE AT 60” LIFT WITH FOOT VALVE: Note: When choosing the solenoid option, you must specify
LD100-PTFE-PTFE 0.7 GPH (2.6 LPH) the voltage and cycle rate required, ie. (120 VAC/60 Hz).
LD200-PTFE-PTFE 9.7 GPH (36.7 LPH)
LD400-PTFE-PTFE 45.0 GPH (170.3 LPH) * Old style diaphragms
DIMENSIONS
WILLIAMS
MODEL A B C D E F G H J
inches
mm inches mm inches mm inches
mm inches mm inches mm inches mm
CLD100-TFE 7.10 180.34 5.88
149.35 1.66 42.16 1/4”NPTM 1/4”NPTM 2.50 63.50 2.50 63.50 1.13 28.70 5.53 140.46
FLOW - GPH
0.6 60 0.6 60
100
0.5 50 0.5 50
PSIG
50
50
AIR/G
0.4 40 0.4 40
PS
PS
100
I
AS
G
IG
0.3 30 0.3 30
AI
PSIG
AI
R/G
R
AIR
AS
/G
0.2 20 0.2 20
/GA
AS
S
0.1 10 0.1 10
0.0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
DISCHARGE PRESSURE - PSIG DISCHARGE PRESSURE - PSIG
CLD100-TFE-TFE
LD100-TFE-TFE CLD100-316-TFE
LD100-316-TFE
STROKE LENGTH: 100% • PLUNGER SPEED: 45 SPM
11 110
STROKE LENGTH: 100% • PLUNGER SPEED: 45 SPM
10 100 10 100
MAX FLOW MAX FLOW (GPH)
(GPH)
9 90 9 90
100 PSIG AIR
8 RE 80 8 80
SU
ES E
35 PSIG AI
R
PR
100 PSIG
U
7 AS 70 7 SS 70
AIR/GAS PRESSURE PSIG
G E
R/ PR
AI S
A
/G
FLOW - GPH
FLOW - GPH
6 60 6 60
AIR/GAS
IR
A
35 PSIG AIR/G
R/GAS
5 50 5 50
4 40 4 40
3 30 3 30
AS
2 20 2 20
1 10 1 10
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
DISCHARGE PRESSURE - PSIG DISCHARGE PRESSURE - PSIG
CLD200-TFE-TFE
LD200-TFE-TFE CLD200-316-TFE
LD200-316-TFE
STROKE LENGTH: 100% • PLUNGER SPEED: 45 SPM STROKE LENGTH: 100% • PLUNGER SPEED: 45 SPM
50 100 50 100
40 80 40 E
80
R
35 PSIG
SU
ES
100 PSIG
35 E 70 35 PR 70
AIR/GAS PRESSURE PSIG
R
SU AS
ES /G
R
PR AI
FLOW - GPH
FLOW - GPH
30 60 30 60
AS
AIR/GAS
100 PSIG AIR
AIR/GAS
/G
R
AI
25 50 25 50
35 PSIG AIR
/GAS
20 40 20 40
15 30 15 30
/GAS
10 20 10 20
5 10 5 10
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
DISCHARGE PRESSURE - PSIG DISCHARGE PRESSURE - PSIG
CLD400-TFE-TFE
LD400-TFE-TFE CLD400-316-TFE
LD400-316-TFE
Control Methods for the Pump
PUMP RETURN
STROKE NO. 2
PUMP 1
EXHAUST NO. 2
TYPICAL INSTALLATION PUMP 2
FOR DUPLEXED PUMPS EXHAUST PUMP 2
Includes:
AIR/GAS 1 Controller 2 Pumps FLOW INLET
DOUBLE ACTING
PRESSURE
REGULATOR
DRYER 1DUMP
Relay
VALVE
1 Manifold
AIR/GAS PUMP
SUPPLY
TYPICAL INSTALLATION
RATE
SETTING
3-WAY
4-20mA 24VDC GAUGE
SOLENOID VALVE
SIGNAL PULSE
SOLENOID VALVES
WPC9001
600 STROKES
PER MINUTE
INLET
PUMP 1
OR PLC
SELECT NO FLOW RESET
FLOW
PUMP 2
FILTER
The pumps can be automated by replacing theMETER
CONTROLLER with a 3-way electro-pneumatic SOLENOID VALVE. The SOLENOID VALVE can
AUTO
LOSS MANUAL
CONTROL OF I/P ADJUST
OR PH
MANUAL
0 100 %
FLOWMETER
be cycled in order to achieve the desired pump output. Flow tracking can be accomplished by having a FLOWMETER or PH METER signal
CHEMICAL
SUPPLY
interpreted by our WPC9001 or a PLC. PROCESS FLUID TOTALIZER
600 STROKES
PER MINUTE
PUMP 1
INLET SUPPLY
OR PLC
SELECT NO FLOW RESET
FILTER
AUTO
LOSS MANUAL
CONTROL ADJUST
OF I/P
OR PH INLET
MANUAL
0 100 %
(1) Note the controller would not be used with the solenoid valve. TOTALIZER
PCV125 AL
Pressure Regulator
FLOW
SENSITIVITY RATES MAX. PRESSURE
WPC9001
Electronic Pump Controller
APU-XP
Automatic Processing Unit NEMA MAX. OPERATING
MODEL CLASS TEMP. MODES
FREQUENCY ACCURACY
WPC9001-GP 4X 140° 60° Auto
0-45 SPM + 0.25% F C Manual
of span WPC9001-XP 7 Switching
Milton Roy Company • 201 Ivyland Road • Ivyland, PA 18974 USA • (800) 235-3421 • (215) 293-0415 • Fax: (215) 293-0498 • E-mail: info@williamspumps.com
www.williamspumps.com