Professional Documents
Culture Documents
Functional description:
The valve trim consists of 2 sealing discs
(1) and (2) with lapped surfaces,
pressed together by a spring (3) and the
differential pressure. The lower disc (1)
is firmly fixed in the valve body; the
upper disc (2) is connected with the
valve shaft and is turned by the actuator
in a range of 0° (valve closed) to 90°
(valve fully open).
Each disc has 1-2 bores for the flow passage; however, the lower (fixed) disc has additional radial flow channels (4),
of which the cross-section increases in the direction of the respective bore (analogues to a V-Port plug). Depending
of the position of the upper, rotating throttle disc a certain cross-section of this V-groove is released and thus the flow
through the valve is ultimately specified.
General Data
Series 8C D / 6H D
Nominal size DN / NPS 15 - 32 / ½“ - 1“
Nominal pressure PN / ANSI 16 - 250 / Class 150 - 1500
Characteristic inherent, nearly square base
Rangeability 100:1
Throttle disc guiding circumference guided
metal sealing: IEC 60534-4 leakage class IV (0,01% of Kvs value);
Seat leakage
option: leakage class V
Heating jacket (optional) connections: flanges DN 15 PN 40 (1/2“ ANSI 150/300)
Materials
Stem sealing
Allowed
Profile Wiper Bonnet
Seal O-ring medium
Seal type ring ring flange Comments
(pos. A) (pos. C) temperature
(pos. B) (pos. D) (DEK)
(pressure)
maintenance- preloaded with
-29 ~ 180°C
free double PTFE V-ring EPDM EPDM NBR 1: standard stainless steel
(≤ PN 63)
seal spring
reinforced
adjustable - - NBR -29 ~ 400°C 1: standard manual adjustable
graphite/Inconel
maintenance-
-46 ~ 200°C 5: insulating
free double PTFE V-Ring EPDM EPDM NBR low temperature
(≤ PN 63) column
seal
Nos. of
KVs
flow characteristic
(m³/h)
channels
0,010 1 A
0,016 1 A
0,025 1 A
0,040 1 A B
0,063 1 A
0,10 1 A
0,16 1 A
0,25 2 A
A
0,40 2 A
0,63 2 B
1,00 2 B
DN 15 20 25 32
Valve type
ANSI NPS 1/2“ - 1“ -
VBL PN16-PN40 130 150 160 180
VBL PN 63 210 230 230 260
VBL Class 150 RF 184 - 184 -
VBL Class 150 RTJ - - 197 -
VBL Class 300 RF 190 - 197 -
VBL Class 300 RTJ 201 - 210 -
8C D VBL Class 600 RF 203 - 210 -
VBL Class 600 RTJ 201 - 210 -
DEK1 147
VH
DEK5 on request
VU 44 51 56 65
LH* 60
Weight (kg)** 7,5 7,5 8,5 8,5
VBL PN 100 210 - 230 -
VBL PN 160 210 - 230 -
VBL PN 250 230 - 260 -
VBL Class 900/1500 RF 273 - 273 -
VBL Class 900/1500 RTJ 273 - 273 -
6H D
DEK1 147
VH
DEK5 on request
VU 47 - 59 -
LH* 60
Weight (kg)** 13,5 17,5
*) option: yoke DIN EN ISO 5210 F07 with backlash-free stem coupling SW17
**) weight without actuator, without yoke
DN 15 20 25 32
Valve type
ANSI NPS 1/2“ - 1“ -
VBL PN16-PN63 SE 250 - 250 250
VBL PN16-PN63 VE 350 350 350 350
VBL Class 150/300/600 SE 250 - 250 -
VBL Class 150/300/600 VE 350 350 350 350
8C D DEK1 147
VH
DEK5 on request
VU 44 51 56 65
LH* 60
Weight (kg)** 7,0 7,0 8,0 8,0
VBL PN 100/160 SE - - 260 -
VBL PN 100/160 VE 360 360 360 360
VBL PN 250 SE - - 260 -
VBL PN 250 VE 360 360 360 360
VBL Class 900/1500 SE - - 260 -
6H D VBL Class 900/1500 VE 360 360 360 360
DEK1 147
VH
DEK5 on request
VU 59 - 59 -
LH* 60
Weight (kg)** 11 13,5
*) option: yoke DIN EN ISO 5210 F07 with backlash-free stem coupling SW17
**) weight without actuator, without yoke
Butt-weld ends acc. to DIN EN 12627 Butt-weld ends acc. to ASME B16.25
Pipe Pipe
DN PN ØD1 ØD2 L1 WA L2 WI NPS Sched. D1 D2 L1 WA L2 WI
AD AD
40 21,3 17,3 22 48 0° >33,6 1,9° 40 21,3 15,8 22 48 0° >33,6 0,6°
15 ½
63 21,3 17,3 22 48 0° >33,6 1,9° 80 21,3 13,87 22 48 0° >33,6 0°
40 33,7 28,5 35 48 0° >33,6 2,9° 40 33,7 26,94 35 >48 10° >33,6 0°
160 33,7 27,9 35 >48 10° >33,6 0° XXS 33,7 15,52 35 >48 10° >33,6 0°
max.
Md required Md allowable
Valve type Connection differential pressure
Nm Nm
bar
8C D DIN EN ISO 5210 F07 100 10 40
6H D DIN EN ISO 5210 F07 250 16 40
Sense of rotation: valve opens left-handed.
Note: the mounted actuator should have adjustable end stops in both directions.