Professional Documents
Culture Documents
Revit Structure-Basic Component Development
Revit Structure-Basic Component Development
2022
Versi 1.1
PELAN OPERASI LATIHAN BIM JKR
2022
OBJEKTIF KURSUS
1. Memperoleh pengetahuan berkaitan komponen
struktur;
2. Memperoleh pengetahuan dan kemahiran dalam
menggunakan tools untuk tujuan pembangunan
families; dan
3. Memperoleh pengetahuan dan kemahiran dalam
membangunkan komponen struktur.
KURSUS
KURSUS
KURSUS • BIM Struktur:
• BIM Struktur: Proses
• EPSA – Asas Pembangunan
Reka Bentuk
Pengenalan BIM Komponen
• BIM Struktur:
• BIM Struktur: Asas • Perisian Reka Bentuk
Dokumentasi
Pemodelan (TSD / Staad Pro
/RSA)
PENILAIAN
PENILAIAN
• Ujian Aplikasi BIM –
• Ujian Aplikasi BIM – PENILAIAN
Tahap 3
Tahap 2 • Pelaporan Projek BIM
• Temuduga –
• Temuduga – • Temuduga –
Pensijilan JKR
Pensijilan JKR Pensijilan JKR
PENGALAMAN
PENGALAMAN PENGALAMAN
• ≥ 5 tahun di JKR
• ≥ 3 tahun di JKR • ≥ 7 tahun di JKR
• Projek PAP
• ≥ 1 tahun projek BIM • Projek BIM
• ≥ 2 tahun projek BIM
• ≥ 3 tahun projek BIM
KURSUS BIM STRUKTUR: PEMBANGUNAN KOMPONEN 2021 4
PELAN OPERASI LATIHAN BIM JKR
2022
TENTATIF KURSUS
NAS :
JKR Pusat BIM
- 03_Struktur
Kekuda
Bumbung
3.2.1 FAMILY
A family is a group of elements with a common set of properties, called parameters, and a related graphical
representation.
❖ Most elements that you create in your projects are system families or loadable families. Loadable families can be
combined to create nested and shared families. Non-standard or custom elements are created using in-place
families.
KURSUS BIM STRUKTUR: PEMBANGUNAN KOMPONEN 2021 10
BAB 3: FAMILY REVIT
Loadable families
Structural Precast Floor
- Precast Hollow Core Slab, Loadable families
Precast Half Slab Structural Framing
- Precast Rectangular Beam
System families
In situ framing topping
Loadable families
System families Structural Column
In situ structural concrete floor - Rectangular Concrete Column
Loadable families
Structural Framing
Loadable families - Rectangular Concrete Beam
Structural Foundation
- Pile cap, pad footing, piling
Example:
a) In Situ Structural Slab (Floor) including topping.
b) In Situ Structural Floor Topping
System settings, which affect the project environment and include types for levels, grids, drawing sheets, and viewports,
are also system families.
System families are predefined in Revit. You do not load them into your projects from external files, nor do you save
them in locations external to the project.
✓ Building components that would usually be purchased, delivered, and installed in and around a building (Eg:
windows, doors, casework, fixtures, furniture, and planting)
✓ System components that would usually be purchased, delivered, and installed in and around a building (Eg:
boilers, water heaters, air handlers, and plumbing fixtures)
✓ Some annotation elements that are routinely customized (Eg: symbols and title blocks)
Because of their highly customizable nature, loadable families are the families that you most commonly create and
modify in Revit
Loadable families are created in external RFA files and imported, or loaded, in your projects. For loadable families
that contain many types, you can create and use type catalogs, which allow you load only the types that you need for
a project.
Creating an in-place element involves many of the same Family Editor tools as creating a loadable family.
Structural Framing :
M_Concrete-
Rectangular Beam.rfa :
300 x 600mm
TYPE
FAMILIES
CATEGORY
Type Instance
Structure
Templat BIM Annotation Title Blocks Profile
Components
Component and
System
Families
Structural Floor,
Wall etc.
Structural
Framing,
Column,
Foundation etc.
▪
•
9. Click “Finish
10. Edit “depth” of the family to control the height 11. Note : the heigt can also be edited by using Extrusion
End & Extrusion Start in the properties
5. Activate Floor Plan View – Ref. Level. 7. Draw profile by using draw panel. Using Rectangle,
Create Blend Base Boundary
6. In Create Tab, Click Blend
6. Specify the sweep path. The path can either be a single closed or
single open path. The multiple paths are not allowed. The path can be
combination of straight lines and curves.
A revolve is a form that you create by revolving a shape Around an axis. You can revolve the shape in a
circle or any fraction of a circle. If the axis touches the revolve shape, the result is a solid.
6. Draw 2D profile
5. Click “Finish”
7. Select the profile. Use move function to move the profile away from
axis line.
6. Sketch the path by using the draw panel and klik Finish
1. Open file jkrST20_extrusion.rfa 3. Click axis line. Draw a line to use as an 4. Sketch revolve profile
axis for revolving geometry
2. Click Create tab. Click Void Forms, select
Void Revolve from the drop down list
5. Click Finish
PEMBANGUNAN KOMPONEN
STRUKTUR
1 4
2
3 6
2
4
2
1
5. Pada Concrete – Cast In Place Concrete (1) – Klik Kanan dan pilih Rename
6 Taip jkrSTm_Concrete Cast In Place_C35
7 Kemaskini maklumat Identity, Graphic, Appearance mengikut keperluan.
8 Klik apply – Klik OK – Klik OK
7
12
13
4
3
1
9 10
1
3
6 7
4
8 9
10
12 13
11
1
2
2
4
. 3
5
Top of column
Structural Framing
i. Creating Profile
ii. Selecting Family Template
iii. Selecting Default Family
iv. Creating Form : Sweep
v. Editing Parameter
vi. Editing Structural Framing – Cast In Situ
vii. Editing Structural Framing – Precast
1
2
Metric Profile
c
a
4. Save As… Profile tersebut untuk digunakan pada Structural Framing Family
1 2
2 2a
5
Nota:
Sekiranya ingin mewujudkan
pelbagai jenis profile, ianya
boleh dibuat dalam family
profile.
1 3
2
4
M_Concrete-Rectangular Beam
Center
(Front/Back)
Member Member
Left Right Right
Left Center
(Left/Right)
1 2
1 2
3D Views – {3D}
1 2 3
3D Views – {3D}
1
Length of drop beam
Drop beam
3D Views
2 3
1
2
1 2
1
2
2
1
3m height.
matter how ling you draw your truss. If you use an actual parameter like “6m” no matter how long you draw the truss
in a model, that dimension will stay at 6m.
4. Menu Tab→ Create → Detail
5. Create Bottom Chord → Create Top Chord
5
4
Create Top
Chord
Create
Bottom Chord
10. “Save as” the trusses as family component – remember to use JKR naming convention.
Symbols Tags
6. Dalam tetingkap Edit Label →Pilih Parameter Mark → Klik sekali untuk
memilih parameter tersebut
2
C:\Program
Data\Autodesk\RVT 2018\
Family
Templates\English\...
OR
C:\Program
Data\Autodesk\RVT 2018\
Family
Templates\English\...
3. Pastikan :
- import unit : Milimeter
- Positioning : Auto – Origin to internal origin
8. Pilih polyline lukisan CAD untuk dijadikan rujukan dalam menghasilkan garisan
bagi titleblock tersebut.
Tukar tajuk dengan cara Ubah Font, align vertical, align horizonal
menaip di dalam sel jadual
18. Klik Edit Type→ Duplicate. Namakan type baru (contoh:4mm) →OK
Ubah Value yang berkaitan di dalam tetingkap Type Properties→OK
PARAMETER
Global Shared
Parameter Parameter
Parameter
Description Examples
Type
Project Project parameters are specific to a single project A project parameter can be used
Parameters file. They are added to elements by assigning them to categorize views within a
to multiple categories of elements, sheets, or views. project.
Information stored in project parameters cannot be
shared with other projects. Project parameters are
used for scheduling, sorting, and filtering in a
project.
Family Family parameters control variable values of the Family parameters such as Width
Parameters family, such as dimensions or materials. They are and Height may be used in a
specific to the family.A family parameter can also be Door family to control the
used to control a parameter in a nested family by dimensions of the different door
associating the parameter in the host family to the types.
parameter in the nested family.
KURSUS BIM STRUKTUR: PEMBANGUNAN KOMPONEN 2021 147
BAB 8: PARAMETER
Parameter
Description Examples
Type
Shared Shared parameters are parameter If a parameter in a family or project needs to
Parameters definitions that can be used in multiple be scheduled or tagged, that parameter must
families or projects. After you add a be shared and loaded in both the project (or
shared parameter definition to a family element family) and the tag family.Shared
or project, you can use it as a family or parameters can be used when elements in 2
project parameter. Because the different families are scheduled together. For
definition of a shared parameter is example, if you need to create 2 different
stored in a separate file (not in the Isolated Foundation families, and need the
project or family), it is protected from Thickness parameter of both families
change. For this reason, shared scheduled in the same column, Thickness
parameters can be tagged and needs to be a shared parameter that is
scheduled. loaded in both Isolated Foundation families.
Parameter
Description Examples
Type
Global Global parameters are specific to a single A global parameter can assign the
Parameters project file, but are not assigned to categories. same value to multiple dimensions.
Global parameters can be simple values, values You can also set the position of one
derived from equations, or values taken from element by the size of another
the model using other global parameters. element. For example, beams can be
Use global parameters to drive and report driven to consistently offset from the
values. floor they support. If the floor design
changes, beams will respond
accordingly.
NAMA KOMPONEN:
NAMING jkrST_str-fr_pc_rcb CIDB.rfa
CONVENTION
NAMING
CONVENTION
TERIMA KASIH…