Professional Documents
Culture Documents
Work Card Chain Stitch
Work Card Chain Stitch
1. AIM :
2. CHEMICALS REQUIRED: Thread, Needle, Cloth
3. EQUIPMENTS REQUIRED: N/A
4. TIME REQUIRED : 15 MIN
PROCEDURE
Put the thread inside the needle
Ensure one end of the thread is short about 3inches long,
Tie a knot at the long end of the thread
Now take the piece of cloth and hold it with the other hand
On the marked area to be stitched, put the needle from the bottom and pull it out,
On the same place where the needle has come out, put the needle and leaving 0.5cm gap
pull out the needle partly
Take the thread and make a right to left/left to right loop on the needle
Pull out the entire needle and the chain loop will be formed,
On the same spot where the thread has come out, put the needle and take 0.5cm gap and
take out the needle.
Repeat the process till the entire stitch is done
In the end tie knot at the back to ensure that the stitch doesn’t come out.