Professional Documents
Culture Documents
A
English
SATA data cable x1 B USB external cable x1 C IEEE 1394 external cable x1
Installation instruction
The allinone solution for PC peripherals
The multi-function panel is a new product that is equipped with multi-slot card reader,
thermal controlled fan speed, temperature display with alarm plus fan speed RPM reading D Mic cable x1 E Audio cable x1 F RCA video cable x1
and multi I/O ports connection.
The allinone is installed in 5 1/4" device bay. The multi-slot card reader addresses all the
popular memory cards.
All 4 memory-slots are active, which allows copy/transfer of data between the different
memory cards.
An over temperature alarm can be set.
An LCD shows 2 fan rpm's and monitors 2 temperature zones.
The multi I/O ports function in the front of a PC provides convenient cable connection,
including USB/IEEE1394/audio/video connectors/SATA power/SATA data. G PCI backplate x1 H Cable ties x3 I Screws and adhesive set x1
Specification
Fan connection spec 12V DC, max 18watt per channel
o o
Temp adjustment 5C / 9F
o o
Temp display 0 ~ 90.0 C / 32 ~194 F
o o
Presetting alarm value 800 RPM / 50 C (122 F)
o o
Auto indicator function 45 C / 113 F = 7 V
o o
55 C / 131 F = 10 V
o o
M External SATA power cable x1 N IEEE 1394 internal cable x1 O USB internal cable x1
65 C / 149 F = 12 V
I/O ports USB2.0 * 2 / 1394 *1 / SATA 15+7 PIN *1 / RCA *1 / Audio in & out / Mic in
Memory card type CF I, CF II, Microdrive, SM, SD, miniSD(adapter), MMC, RS MMC(adapter),
T-Flash(adapter)
1 2 www.akasa.com.tw
Temperature Audio I / O
Audio Panel sensor cable port E
with connector
Mic Line in
Card reader
D
USB cable
3 4 www.akasa.com.tw
Installing the Panel Connecting the fan controller and temperature sensor
1) Remove the cover of an empty 5.25" 1) Connect the fan cable connector to J .
external drive bay.
CAUTION :
In auto mode, the fan speed will be controlled
automatically, please place the sensors in the
appropriate position.
NOTE :
Do not place the sensor between
the heatsink base and the CPU surface.
Place the sensor on the side of the heatsink
near the base.
5 6 www.akasa.com.tw
▲ CardReader
USB connection
VCC D- D+ GND
▲ USB
VCC D- D+ GND
▲ 1394
GND +12V TPB1- GND TPA1-
VCC D- D+ GND NC
7 8 www.akasa.com.tw
▋No driver installation is required for ME/XP/x64. All necessary files are installed automatically.
Uninstall Driver
9 10 www.akasa.com.tw
Manual Mode
Auto Mode
Increase value ( RPM unit :100 RPM temperature of the sensor voltage output for the fan
BT3 Increase fan RPM
Temp unit : 5oC ) 45oC / 113oF 7V
55oC / 131oF 10V
BT4 Decrease fan RPM
Decrease value ( RPM unit :100 RPM 65oC / 149oF 12V
Temp unit : 5oC )
NOTE :
the temperature alarm setting for each thermal sensor is set manually.
11 12 www.akasa.com.tw