Professional Documents
Culture Documents
First issue:2015/02/03
Revised issue:2016/06/23
SDS No. 9010-c
2. Hazards Identification
GHS Classification:Not applicable.This product is exempt from the GHS classification.
Emergency Overview:
Unheated fluorocarbon polymer product is non-hazardous.
Caution! The fumes produced when heated at high temperature are toxic.
Primary Routes of Entry: No identified
Primary Target Organs: No identified
Potential Health Effects:
Eye Contact: No identified
Skin Contact: No identified
Inhalation: Exposure to thermodegradation products may cause influenza-like symptoms.
Ingestion: No identified
Carcinogenicity: Polytetrafluoroethylene is classified as IARC GROUP 3 ( Not classifiable as its
carcinogenicity to humans).
3. Composition/Information on Ingredients
Ingredient CAS No TLV PEL
Polytetrafluoroethylene (PTFE) 9002-84-0 not estab not estab
Kind of core material *
(Refer to the following table - - -
TM
“Understanding a TOMBO No.”)
Key: TLV = ACGIH2016, 8hr, time weighted average (TWA)
PEL = OSHA2006 permissible exposure limit
* : When a worker handles this product; that is not in a condition except the solid.
Therefore the chemical substance of "Kind of core material" does not list it.
When information of "Kind of core material" is necessary, please contact NICHIAS.
Page 2 of 4
First issue:2015/02/03
Revised issue:2016/06/23
SDS No. 9010-c
propagate flame. However under high temperature they can yield toxic particles, fumes, and gases.
In case of fire, escape to the windward.