Professional Documents
Culture Documents
Level 2 Repair
SUB CAM
SUB ANT
RCV
Main CAM SIM Socket
Ranging Sensor
Volume Key
Power Key
Battery
FRC
USB FPCB
Motor
S Pen
SPK
Main ANT
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-2. Pre-requisite
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
[GH81-19352A]
Tape BG Top
[GH81-19359A]
[6001-003400]
[6001-003407]
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-4. Disassembly
※ Caution ※ Caution
Be care of scratch. Be care of scratch.
3 Unscrew 17 Point and disassemble SIM Tray 4 Disassemble Rear mid ASSY
from device.
(Before disassemble Rear mid ASSY, MST
Conn disassemble first.)
MST Conn
UWB Conn
※ Caution
※ Caution
1) Be care of scratch.
Be care of Rear damage.
2) Be care of Rear and connector damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
※ Caution ※ Caution
1) Be care of scratch. 1) Be care of scratch.
2) Be care of Rear and connector damage. 2) Be care of Rear and connector damage.
3) Be careful not to damage the PBA. 3) Be careful not to damage the PBA.
※ Caution ※ Caution
1) Be care of scratch. 1) Be care of several kinds of damage.
2) Be care of connector/cable damage. 2) Be care of SUB PBA damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
Main CAM
Batter
Motor
※ Caution ※ Caution
Be care of several kinds of damage. Be care of several kinds of damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-5. Assembly
Main CAM
Battery
Motor
※ Caution ※ Caution
Be care of FPCB, components damage and tilt. Be care of press power/time.
3 Assemble Main PBA and Sub PBA to Front case 4 Screw 3 points in SUB PBA.
- Torque : 1.4 Kgf·cm)
※ Caution
※ Caution
1) Be care of scratch and REAR damage.
Be care of chip damage nearby screw point.
2) Check for contact damage.(red area).
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
5 Assemble battery connect and the other 6 Assemble the TOP and BOTTOM REAR in
connectors(9 Point).
Also Front CAM assemble. sequence. also Ranging Sensor.
※ Caution ※ Caution
Be care of press power/time. Be care of scratch and REAR damage.
`
7 MID REAR ASSY assemble. 8 Screw insertion 17 Point and assembling SIM
(Before Mid Rear ASSY assemble, MST conn socket .
assemble first) - Torque : 1.4 Kgf·cm
MST Conn
※ Caution
※ Caution
1) Be care of scratch and REAR damage.
Be care of Rear damage.
2) Be care of press power/time.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
9 Attach the back-glass tape on the Rear. 10 Attach the back glass on the REAR side.
- Gently press all adhesive parts of tape
using disassembly stick or hands.
※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch and tilt.
※ Caution
Be care of scratch and tilt.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.