Professional Documents
Culture Documents
Overview
APPLICATIONS
Wireless connection to sensors such as:
Tilt meters
Crack meters
Piezometers
Strain Gauges
Load cells
Rod extensometers
The Wi-SOS 480 (Wireless Sensor Observation System) provides
a system to transmit, receive and data log remotely signals from Crack meters
any sensor with a vibrating wire, voltage, 4-20mA, mV/V, RS-485,
SDI12 or resistance output over long ranges up to 15 km. Joint meters
It utilises the Worldsensing G6 Platform with the latest LoRa Settlement cells
spread spectrum and data modulation technology providing
Temperature sensors
long range, low cost, low power consumption and high
connectivity. V-Notch weirs
The Wi-SOS 480 is a sub 1 GHz band, long-range star network
consisting of a series of wireless Nodes and a Gateway. The FEATURES
Gateway collects the data from the Nodes, stores it locally and it
is available to view and/or download via GPRS or wired Ethernet. Long-range 868/915MHz radio
Data is also stored within the individual Node which can, if
required, be accessed locally via a USB connection Low-power LoRa® spread spectrum technology
The system has a proven track record worldwide of performing London Underground approved product
even in high density urban areas with Nodes below ground level
Easy configuration
and over long distances in open cast mining applications.
Wireless Tilt and Laser Distance Meter Nodes are also available No repeaters
which can be integrated into the system, together with any other Instant data access
type of Node. The user can configure, diagnose, and download
using any Android device. Android technology
Software is embedded in the Gateway, which allows it to be fully Long range communication up to 15 km
configurable over air or Ethernet which provides full diagnostics
and health check of the system. Up to 10 years battery life
The Wi-SOS 480 Web Centre provides a platform to download User-friendly configuration with Android device
data and view it on PC, tablet or mobile phone or the data can be
forwarded automatically via FTP, API or Modbus TCP to other data Vibrating wire, Digital & Analogue sensor input
options
visualisation software.
Robust, small and weather-proof box for harsh
environments
VW
Wi-SOS 480 Wireless Monitoring System
VIBRATING WIRE
Measurement method Embedded algorithms increasing immunity to noise
Sweep range A 450-1125 Hz; B 800 -2000 Hz; C 1400-3500 Hz; D 2300-6000 Hz
THERMISTOR
Measurement range 0 Ω to 4 MΩ
Resolution 1Ω
BAROMETER
Pressure range 300 to 1,100 hPa
PHYSICAL
Dimensions (L x W x H) 1 channel: 100 x 61x 100 mm; 5 channel: 200 x 61 x 100 mm
Enclosure IP67
BATTERY
Battery type 3.6V Size C (Saft LSH 14 recommended)
Battery life estimation1 sampling rate 5 minutes 0.9 year 2.2 years
Battery life estimation1 sampling rate 1 hour 3.5 years 7.1 years
Battery life estimation1 sampling rate 6 hours 4.6 years >10 years
1
Based on typical European radio configuration, spreading factor 9, radio transmit power 14dBm under laboratory conditions. Consumption varies depending on the
sensor used, sampling rate and environmental and wireless network conditions. Estimations based on use of Saft LSH 14 batteries and lifetime mathematical model.
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
Analogue node
GENERAL
Channels 1 to 4 (with variable signal inputs, see below
SIGNAL INPUTS
VOLTAGE
Measuring ranges [V DC] ±10 ; ±1.25 (8x)
POTENTIOMETER
Accuracy (0 to +50ºC) ± 0.02 % FS
THERMISTOR
Accuracy (0 to +50ºC) ± 0.2ºC
PT 100
Accuracy (20ºC) ± 0.8ºC
PHYSICAL
Dimensions (L x W x H) 200 x 61 x 100 mm
Enclosure IP67
BATTERY
Battery Type 3.6V Size C (Saft LSH 14 recommended)
I channel - 6 hours >10 years >10 years >10 years 8.5 years >10 years
4 channel - 6 hours 8 years 6.6 years >10 years 8.5 years >10 years
1
Based on typical European radio configuration, spreading factor 9, radio transmit power 14dBm under laboratory
conditions. Consumption varies depending on the sensor used, sampling rate and environmental and wireless network
conditions. Estimations based on use of Saft LSH 14 batteries and lifetime mathematical model.
Wi-SOS 480 Wireless Monitoring System
Digital Node
GENERAL
Channels One RS-485 channel and two SDI-12 channels
SIGNAL INPUTS
Type Digital, Digital BUS
PHYSICAL
Dimensions (L x W x H) 200 x 61 x 100 mm
Enclosure IP67
BATTERY
Battery Type 3.6V Size C (Saft LSH 14 recommended)
1
Based on 15 biaxial sensors using typical European radio configuration, spreading factor 9, radio transmit power 14dBm under laboratory conditions. Consumption
varies depending on the sensor used, sampling rate and environmental and wireless network conditions. Estimations based on use of Saft LSH 14 batteries and
lifetime mathematical model.
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
Piconode
GENERAL
Channels 1 configurable + 1 thermistor + 1 pulse counter
ANALOGUE INPUTS
FULL WHEATSTONE BRIDGE (FWB)
Measuring range ±7.8 mV/V
Accuracy ± 0.13 % FS
POTENTIOMETER/RATIOMETRIC
Input range 0-5 VDC (0-1V/V)
Accuracy ± 0.1 % FS
SINGLE-ENDED VOLTAGE
Input range 0-5 VDC
Accuracy ± 0.6 % FS
Pulse rate 0 to 50 Hz
Accuracy ± 1 pulse
THERMISTOR
Accuracy 0.04ºC (0.03 % FS)
PHYSICAL
Dimensions (L x W x H) 113 x 80 x 60 mm
Antenna Internal
Material Polycarbonate
Enclosure IP67
BATTERY
Battery Type 3.6V Size C (Saft LSH 14 recommended)
Battery life estimation1 sampling rate 5 minutes 0.9 year 1.8 years
Battery life estimation1 sampling rate 6 hours 7.3 years >10 years
1
Based on typical European radio configuration, spreading factor 9, radio transmit power 14dBm under laboratory conditions. Consumption varies depending on the
sensor used, sampling rate and environmental and wireless network conditions. Estimations based on use of Saft LSH 14 batteries and lifetime mathematical model.
Wi-SOS 480 Wireless Monitoring System
Gateway
MODELS
GW-868-EDGE RX: 863- 873MHz, TX: 863-873MHz
POWER
PoE Both mode A and mode B (802.3af specifications)
PHYSICAL PROPERTIES
Dimensions (L x W x H) 265 x 165 x 100 excluding antenna
Enclosure IP67
NETWORK INTERFACES
10/100 Ethernet WAN (RJ45 PoE)
CONNECTIVITY
ISM Sub 1 GHz band, sensitivity: down to -137 dBm (SF11)
Integrated internal antennas GPS, 4G, LoRa (peak gain=2,6dBi). External also available
ACCESSORIES
External antenna - omni-directional
Surge/lightning protection
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
APPLICATIONS
Rail tracks
Party walls
Structures
Tunnels
Bridges
Slopes
Piles
Concrete dams
FEATURES
The Geosense® Wi-SOS 480 Wireless Tilt Meter is used for
long-range, remote readings in geotechnical monitoring Highly accurate and reliable biaxial tilt sensor
applications.
Individual calibration UKAS traceable
The tilt meter combines a high-precision biaxial MEMS
sensor with a radio transmission network to provide accurate Long-range 868/915MHz radio
measurements with the benefits of long-range wireless
Long-range communications (up to 15km)
communication and extended battery life.
What makes Wi-SOS 480 different to other wireless systems is Low-power LoRa® spread spectrum technology
the use of data modulation via the Worldsensing G6 Platform Up to 8 years battery life
which uses the latest LoRa spread spectrum technology.
This technology means Long Range, Low Cost, Low Power Robust, small and weather-proof box for harsh
Consumption and High Connectivity. environments
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
GENERAL
Battery life – sampling rate 5 min 1.2 years
SENSOR
Type MEMS (Micro-Electro-Mechanical) Inclinometer
Range ± 15°
Resolution 0.001°
Repeatability 0.005°
Axis Biaxial
MEMORY
Date storage 200,000 readings
PHYSICAL
Box dimensions (W x L x H) 100 x 100 x 61 mm
RADIO
Range open sight 15km
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
APPLICATIONS
Tunnel and mining convergence monitoring
FEATURES
Wireless sensor
The laser distance meter node measures the relative distance Long-range communications (up to 15 km)
between pairs of reference points. One of the two points can be a
natural surface or target foils while the node can be placed at the Long battery life (>6 years @1h sampling rate)
other end point.
Compact (150 x 100 x 61 mm)
Measurement of tunnel convergence is one of the most Visible Laser Class II laser with 655 nm
important controls of the NATM (New Austrian Tunnelling
Method) construction. Portable devices like tape extensometers, High repeatability
levels and temporarily installed total stations allow sporadic
User-friendly Android configuration app included
measurements. On the other hand, one of the most commonly
used methods, the measuring tape, disrupts construction Pointing mode for an easy installation
activities due to the use of aerial work platforms.
Web browser software
Laser distance nodes can be easily relocated along the
Reliable & robust
convergence cross sections up to the excavation front or until
the measured relative displacements are stabilised when the Standard CSV download, FTP push, Modbus TCP
required frequency of measurements is reduced. They can also and API access
be used when permanent monitoring is required.
Robust, small and weather-proof box
In a similar way, the laser distance node measures deformations
in underground excavations and mining without causing work Easy configuration
disruptions and delays.
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
Battery life – sampling rate 6 h 8.5 years Lifetime estimates are based on distance measurements
between 10 and 20 m.
Battery type 2 x 3.6V C-Size user-replaceable batteries (recommended Saft LSH 14)
App features Pointing mode and radio signal coverage tests for an easy installation
Resolution 0.1 mm
Laser type (light source) Visible Laser Class II laser with 655 nm
@1m ±1 mm ±2 mm
@ 10 m ±1 mm ±2 mm
@ 20 m ±1.5 mm ±3 mm
@ 50 m ±4 mm ±7 mm
@ 100 m ±9 mm ±15 mm
MEMORY
Reading capacity 200,000+ readings
MECHANICAL
Box dimensions (L x W x H) 100 x 100 x 61 mm
Enclosure IP67
External Port Mini USB port for configuration and data access. Can also power the node
ACCESSORIES
Adjustable mounting plate for vertical surface
Swivel mounting bracket. It can be mounted on a wall or on a convergence bolt with 3/8" male thread
* On natural objects (white wall, low target illumination <3K lx, moderate temperatures)
** On natural objects (white wall, high target illumination with 30K lx, full specified operating temperature range) www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
GATEWAY TO NODE
Open Field 15 km (10 km for PicoNode)
The above information is based on using an external antenna. The unit comes with an internal antenna as standard which may result in a reduction in
range depending on the site conditions. Radio range depends on specific environmental conditions so these distances are only indicative.
Long distance lineal construction projects (when the Gateway will be located close to one end)
e.g. metro construction, tunnels, railway construction and maintenance, motorways, tailings dams.
Long distance lineal construction projects (when the Gateway will be located in the middle of the monitored section)
e.g. metro construction, tunnels, railway construction and maintenance, motorways, tailings dams.
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
The G-LOG app allows the user to configure and download data from any Wi-SOS
480 Node.
FEATURES
Node connection via USB mini with OTG cable
Android compatible
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
CMT Edge is ideal if you want to individually manage different on-premise projects remotely. CMT Edge allows
you to access network information and download sensor and health data from the software. The software shows
the status of all the data loggers in your network and can provide alarms when a logger is disconnected. It can
also connect through various protocol options for data retrieval.
Access data directly from the gateway when you need it.
• Access the data server embedded in the gateway, one gateway at a time.
• Operate using a local network or via internet.
• Access data through a web-based software.
SYSTEM SET UP
NETWORK MONITORING
Gateway monitoring
• Signal coverage test location on a map,
• Uptime.
• Power input.
• Cellular modem information.
DATA MANAGEMENT
www.geosense.co.uk
Wi-SOS 480 Wireless Monitoring System
CMT Cloud is ideal if you want to remotely manage your projects. Once all data loggers and gateways have been
onboarded and configured in the software gateway redundancy makes sure that data will be available even
in cases of connectivity cuts or lack of coverage through backups in the cloud. The software shows the real-
time status and mapping of all the data loggers and gateways in your network. provides basic visualization for
sensor readings and can provide alarms. It can easily integrate with 3rd party software through various protocol
options.
USER ACCESS & DATA STORAGE
Ensure 24/7 data access and network redundancy
• Onboard, deploy and remotely manage devices in the network.
• Access data from multiple gateways in one project site* with gateway redundancy.
• Get 24/7 access to data stored in the cloud.
• Provide access to multiple, simultaneous users using a single log-in*
*Multiple projects sites and different access privileges available soon
SYSTEM SET UP
Onboard, deploy and remotely manage devices in the network.
• Register devices in the network.
• Select the sampling rates of the sensor readings.
• Securely transmit sensor data in near real time.
• Import and export configurations available soon.
• Provide administrator and view-only access.
NETWORK MONITORING
Monitor devices and manage alarms.
See an overview of the network status on a dashboard and map.
Monitor the status of data loggers and gateways:
Gateway monitoring Data logger monitoring
• Location, • Location,
• Signal coverage map, • Real-time availability status (on/off ),
• Real-time availability status (on/off ), • Uptime,
• Uptime, • Internal temperature,
• Power input. • Number of messages received/ not received,
• Message reception, • Signal power and coverage (RSSI, SF),
• Cellular modem information. • Battery voltage.
• Receive alerts in case of a data logger or gateway unavailability
Sensor near real-time availability status (on/off ) and grouped data per network,
site or project available soon.
DATA MANAGEMENT
Extract and configure sensor data.
• Manually or automatically download sensor readings and custom aggregations as CSV files.
• Convert raw sensor data to engineering units.
• Access basic data visualisation charts.
• Protocols: MOTT pusher (for near real-time data). available upon request
• FTP, FTPS
• HTTP API (for new and historical data retrieval and sampling rate modifications), available upon request
• Sampling rate adjustments.
• Integrate 3rd party software (such as Vista Data Vision, Trimble 40, Eagle.io, Geoscope, Hexagon Geomonitoring Hub)
Geosense Ltd, Nova House, Rougham Industrial Estate, Rougham, Bury St Edmunds, Suffolk IP30 9ND, England