Professional Documents
Culture Documents
Two-Screw Team
JAGUAR 2200 Series Back Pull Out
Heavy-Duty, Specialty Screw Pumps Rotor removes for inspection or repair without disturbing
piping or driver. One-craft maintenance.
• Capacities to 4800 GPM
• Discharge pressures to 1000 PSI
• Viscosities to 150,000,000 SSU
Advantages
• Flexible Design
• Variety of Material Options
• Accommodates Most Seal Designs
• Hopper-Style Suction Available
• Capable of handling shear sensitive
fluids
Applications
• Chemical Process Industry
polymers, synthetic fibers
Bearings
• Petroleum Industry Radial loading is handled by heavy-duty roller
asphalt, vacuum bottoms, residuals, bearings at five locations that are sized to handle
crude oils maximum loads. These bearings are oil lubricated.
• General Industry The heavy-duty double-row thrust bearing locks the
food, power, barges drive shaft in position axially. This pump’s unique six
bearing design is the result of more than 50 years of
Options experience in high pressure applications.
• Iron, Cast Steel, Stainless Steel Casing
• Chrome Plated Bores
• Hard Fused Coating on Rotors
• Nitrided Timing Gears
• External Seal Lubrication
• General Compliance with API676 Hardened Steel Double Helical Timing Gears
Hardened steel double helical timing gears are used to prevent
metal-to-metal contact between the meshed rotating screws. The
clearance between the pumping screws provides longer pump life
and higher average efficiencies over the life of the pump.
The double helical concept allows for multiple tooth engagement
and prevents screw flanking. Both are features that commonly used
spur-type gears cannot provide.
Suction Advantages
These pumps come with a variety of suction options. These
include center-suction, hopper suction, high-pressure suc-
tion and extending the screws into the suction features.
This accommodates a wide range of process variations
such as low NPIPR and high suction pressure. Also, the
top suction hopper design allows for direct connection to
Typical hopper style Jaguar suitable for the bottom of the tanks or reactors.
mounting beneath a reactor.
Body
The solid cast body is generously ribbed and has thick
cross sections resulting in increased rigidity. The suc-
tion flow passage is designed to provide a constant area
from the flange opening to the screw entrance allowing
for the best NPSH capabilities of any similarly sized
pump.
Wear Protection
To insure long life in tough services, the critical pumping surfaces are
coated. The body bore can be coated with an electrolytically applied
industrial hard chrome. The screws can have a variety of OD coatings
with hardness in excess of 60 (Rockwell C). Nitriding and other coating
combinations are added features that, when combined with the chrome
lined bore, have proven to be the best wear protection in the industry.
Jacketing
Optional jacketing of the pump body and stuffing box
housing is available for circulation of steam or thermal
fluids. The suction passages, bore walls, and discharge
areas are enclosed to ensure uniform temperature
distribution. Connections are supplied for inlet and
outlet circulation.
4500
Contact Warren
16000
4000
J80X
14000
3500
J70X
12000
Capacity (gpm)
3000
J60X
10000
2500
J50X
8000
2000
J40X
6000
1500
J30X
4000
1000
J20X
500 2000
J10X
0 0
0 100 200 300 400 500 600 700 800 900 1000
Differential Pressure (psid)
Approximate Dimensions
PUMP SUCTION DISCH. SUCTION DISCH. MOTOR
SIZE 150# ASA 300# ASA 150# ASA 300# ASA
Standard Standard Hopper Hopper HP RPM FRAME C CP D D’ HA HB HC HD HG HL HM HO HO’ HT X X’ Y Z HL’
Body Body Body Body
J-10X 21/2" 11/2” 6" 2" 25 1750 284T 249/16” 341/8” 7 47/8” 15 46 6311/16” 107/8” 33/8” 17 181/2” 133/4” 163/8” 5 29
/32” 43/32” 33/32” 31/2” 23
J-20X 3" 2" 8" 21/2" 40 1750 324T 2713/16” 3913/16” 73/4” 6 1/8 18 523/16” 72 121/2” 4 191/2” 215/16” 183/8” 183/8” 5 13/16” 51/16” 39/16” 37/8” 27
J-30X 4" 3" 8" 3" 60 1750 364T 331/16” 4413/16” 9 6 20 587/8” 827/8” 131/2” 4 221/8” 231/4” 171/2” 201/2” 5 15/16” 45/16” 33/16” 41/2” 313/8”
J-40X 6" 4" 10" 4" 100 1750 405T 3811/16” 547/16” 103/4” 61/8” 22 703/4” 981/8” 151/4” 4 267/8” 261/16” 193/4” 235/16” 5 111/16” 51/16” 49/16” 5 383/8”
J-50X 8" 6" 12" 6" 150 1750 445T 445/8” 611/2” 121/2” 71/2” 24 813/8” 1117/8” 17 4 301/2” 291/16” 223/8” 261/4” 5 2 6 53/8” 53/4” 44
J-60X 10" 8" 16" 8" 200 1150 8110 655/8” 6811/16” 15 85/8” 27 1071/8” 1395/16” 211/2” 6 341/4” 361/4” 28 33 5 21/4” 81/2” 61/2” 7 503/4”
J-70X 12" 10" 18” 10" 400 1150 8288 715/8” 893/8” 207/8” 91/2” 31 125 166 277/8” 6 44 717/8” 353/8” 434/7” 5 3 141/16” 71/2” 113/8” 655/8”
J-80X 16" 12" 20" 10" 500 870 8309SU 823/4” 1051/4” 231/2” 14 36 1431/2” 193 301/2” 6 491/8” 711/2” 391/2” 501/2” 5 33/4” 141/2” 91/4” 113/4” 753/4”
HC
CL PUMP
HL HT
CL MOTOR & BASE CP C
CLEARANCE
DISCHARGE REQUIRED FOR HL1
FLANGE REMOVAL OF ROTOR
X
HM
HO D
HD
HG
Y
HB
HA
Allweiler Houttuin IMO Pump Warren Pumps Warren Pumps Inc. • 82 Bridges Ave. • PO Box 969 • Warren, MA 01083-0969 USA
Ph. 413-436-7711 • Fax 413-436-5605 • www.warrenpumps.com • email: warrensales@colfaxcorp.com WP 4/02 5M