Professional Documents
Culture Documents
MI004323-E ENGLISH 1/8 MI004323-E ENGLISH 3/8 MI004323-E ENGLISH 5/8 MI004323-E ENGLISH 7/8
108 mm
When wiring is completed, replace the
Board base Micro USB plug-in cover to protect cables from accidental
Number: 4 contact.
Max frequency: 30 Hz
Digital inputs Type: Reed, contact, PNP, Pulscap INSTALLATION
Threshold OFF: 0 - 2 Vdc, I < 1 mA The MyALARM2 has a SIM plug in,
Threshold ON: 12 - 24 Vdc, I > 3 mA SIM card placed in the lateral right side of the
The module is designed to be case.
Analog inputs Number: 2 installed, in vertical position, on DIN To insert the SIM card in the
Type: voltage (0..30V) / current (0..20 mA), IEC EN 60715 rail too. SIM 80 mm 8 mm 32 mm
corresponding connector, ensure that
programmable; accuracy: 0.1% of end scale card the card is oriented with metal contacts
Inserting in the DIN rail towards the left (with reference to the
Voltage output +12 VC @ 50 mA (max)
How the picture shows: figure). OPTIONS
Internal temperature Number: 1 1) Insert the three hooks of support
sensor Type: NTC into the corresponding three holes
micro USB for configuration and battery charge in the bottom side of MyALARM2
SD
USB
card The MyALARM2 has a SD card plug in
Display
LCD 128 x 32 Dots
Visible area 39 mm x 8.6 mm
case;
2) To fix the module in the DIN IEC Micro SD that can be used for data logging and MY2 B S G - 0 R - 0 - M - B G
updating MyALARM2 firmware. The
Type: push-push EN 60715 rail, hook the omega
Micro SD For SD card and SD HC card support in the DIN rail. Alternatively,
card micro SD card plug in is placed in the TYPE RELAIS CONNECTIONS COLORE
lateral right side of the case. B=Base 0=whitout M=Springs clamp B=Blue
Memory SD CARD: max 32 Gb the support is provided with two
To insert the SD card in the S=Security R=with relays G=Grey
SIM Type push-push holes: it is possible the wall fixing
corresponding connector, ensure that G=GPS
GSM features using two screws.
Quad band (850 / 900 / 1800 / 1900 MHz) the card is oriented with metal contacts ESEMPIO:
towards the left (with reference to the «MY2B-R-0-M-G» code for MyALARM2 Base unit with 2 relay outputs, with spring clamps and case color
GPS board (optional) figure). blue.
GPS features Number of channels: 42 Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate
Sensitivity - tracking: -160 dBm; -autonomous collections programs). This symbol, found on your producr or on its packaging, indicates that this product should not be treated as household
waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical & electronic
acquisition: -143 dBm equipment. By ensuring this product is didposed of correctly, you will help prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve natural
Time to first fix - hot start: 5 s; -cold start: 30 s (at resources. For more detailed information about the recycling of the product, please contact your local city office, waste disposal service of the
retail store where you purchased this product.
-130 dBm)
MI004323-E ENGLISH 2/8 MI004323-E ENGLISH 4/8 MI004323-E ENGLISH 6/8 MI004323-E ENGLISH 8/8