Professional Documents
Culture Documents
Ethiopia
Date: 19/03/2015 EC
1|Page
AKNOWLEDGMENT
I would like to thank Ins. Dassalegn Wase and Yaikob kebede for their assistance
with this project. In addition I would like to thank Doreni College Industry
Extension Service Process Ins. Fikiru Asefa, for his help, support, and patience
throughout this project. I would also like to thank the SME members who took the
time to speak with me, as well as the mason man who I interviewed. Lastly, I would
like to thank the all Doreni College management members that helped publish the
resource.
Table of Contents:
Table Of Contents:................................................................................................................................................................... III
Abstract ...................................................................................................................................................................................... IV
Introduction .................................................................................................................................................................................. 5
4. Objective .................................................................................................................................................................................. 7
5. Mission....................................................................................................................................................................................... 8
9. Design ....................................................................................................................................................................................... 10
14. Raw Materials Required For The Production Of sprit level ........................................................................................ 14
16. Tools And Machines Required For The Production Of sprit level ............................................................................. 15
vertical member ,slab and screed. This technology can be used to increasing work
at time, to decreasing worker. The design was prepared by using AUTO Cad 2D
view, front view, top view and any other detail drawing was specified. The project
also used to prevent to strati 90/( degree ) improve the quality. The materials that
used to prepare sprit level include wood ,timber, and etc. was specified.
Introduction
1. Sprit level a tool is used to spread out and strait before it
has taken it’s initial set. Normally a large timber tool that
is affixed to hand poles and is pushed back and forth across the . A
making it smooth. Sprit level is used after the surface has been made level
(100%copying ) the trainee must know the strategy and be producer of the project
2. Project description
The sprit level and Hand Tools are used to smooth or strait and improve the
surface of the concrete. Just twist the long handle and swivel head angles for
The project is made up of timber & wood material structure. it has different
components and operated manually, in built with easy assembly’s parts, this has
been designed specifically to be constructed in the work place that have only a
working area,
standard metric size of timber are specified in this project details .but other
given to the strength and durability which the components require the machine,
tools and equipment that the necessary to construct this machine are, plane
machine, ,and their equipment ,drilling machine ,sanding machine ,and hand general
tools such as hacksaw ,files, tape, rules, protractor engineering square ,chisel etc.
the machine is a very use in addition to any construction enabling new and better
The number of plate metal, plain bar that can be produced per day is limited by
the skill of the person work on the machine. Factors like not working hard these
laborious tasks.
As my decided to design and produce locally this smooth / leveling work tool
making tool since it was been proven successfully at was already introduction in the
and as means of generating income and allow the worker operates faster and with
Conditions may vary in various developing countries, but have same thing in common
that is to save time and with ease in operation. We are hoping that our micro-
enterprise, as we designed and manufacture the said project will be benefited even
with different culture and level of acceptance. Whenever, the leveling technology
technologies that would be helpful and can complement with the other sector. as
Technology in Ethiopia and also to show the preparation sample of simple value
chain.
4. Objective
The purpose of strait or leveling wall,column concrete is to level ridges and fill
voids left by the screening operation. It should also slightly embed the column
,wall ,horizontal slab and vertical column to make subsequent finishing operations
easier.
4. 1 General objective
The study will be focusing on main actors (MSEs, privet owners, NGOs and
in the market through qualitative, on time and low cost products with their
To identifies the task and responsibilities of main actors and stack holders.
technology than before and organize them for coordination and managing
merely.
To use all the benefits’ of the study for succession achievement of the goal.
5. Mission
To design and fabrication according to leveling tools and to distribute the
quality product and fair price Good quality and with low delivery time satisfy
customer.
increasing the capacity of the structure level it will create job opportunity for
SME and to generate income the beneficiaries form this project the following
Individual persons.
machine for straight and level the plate metal parts by flat and making
the operations increasing workers’ likewise, the project may provide easier
availability to any government, private TVET colleges and institute even macro and
small enterprise since it’s a locally developed tools with ease in operations and
easier to maintain.
Whole Sale
Fixing & Design
Design Testing decoration
Selected
machine Component
Material diagram
Product
bar,e.t.c Decoration Distribute
Assembling
Part in retailer
Design and
Propose Process
Assembling with handle
8.3. Value Chain Analysis gap
Whole
Design machine Fixing & Decoration
Selected Sale
diagram Testing
Material Component
Product
Design decoration Distribute
Design and Propose in retailer
Process Assembling
doll gourd
Assemble
with handle
9. Design
The sprit level design takes into consideration as well as the Type and shape
construction work given. The design of the sprit level is determined by the client
our client attention maybe customer interest is rectangle, round, square and oval
shape etc. Detail drawing with all designs parameters Sub assembling drawing with
detail part list. Three dimensional drawing with it’s measurement. It can move
analysis is used to choose the means using the least resource for a given output
EIS SCW1 09 0322 Prepare and Mix Mortar, Cast, and Level Concrete Work
EIS SCW3 01 0322 Use Computer Aided Drafting Systems to Produce Basic
Engineering Drawings
EIS SCW3 13 0322 Construct and Install Floor Frames, Planks and Sheets
EIS SCW4 03 0322 Produce labor and material schedules for ordering
No Activity 1 2 3 4 1 2 3 4 1 2 3 4
1 Collecting
material
2 Design/drawing
3 production
4 Assemble
5 Decorative
6 Transfer to
SMS
Table 1: Schedule
S/ Measuremen
Name of tools and machines Qty Remark
N t
Hand Tools
1 Try-square Pcs 1
2 Baw saw Pcs 1
3 Brush Pcs 1
4 Sponge Pcs 1
5 Tape rule Pcs 1
6 Circular machine Pcs 1
7 Tap Pcs 1
8 Pcs 1
9 Pcs 1
18. Conclusion
This manual explains the details of the sprit level and I decide which have been
yields through the application of this bull sprit level. This sprit level was design to
ease solve the problem of construction from the Doreni town SMS. The absence of
training on the sprit level in Doreni technic College had the effect of making
construction Doreni town for the last few years. Based on decide from the self
about the stated above problem, I comes up with solution to design sprit level to
19. Recommendations
As my discussion in the privies section; the proposal / manual strongly puts forward
of this sprit level technology on the specified SMS which is in Doreni town
and local.
The Doreni town SMS should be training depending sprit level technology.
All SMS should be use sprit level for the purpose it intended only, which is
for project.
20. REFERENCE
3. EIS SCW1 09 0322 Prepare and Mix Mortar, Cast, and Level Concrete Work
4. www.ALTRAD-Belle.com
5. www.Belle247.com
6. www.goldblattusa.com
Dictionary. Website Upgrades Inc. 2000. Retrieved 2007-05-21. "screed, n. 3" and