Professional Documents
Culture Documents
2
NORRIS
30 40 54 78 75/90 96 97 CS
6-Point pin
Body End Socket White Blue Brown Yellow Orange Green Purple CS Rod
5/8”
1-3/16”
(15,88 mm)
3/4”
1-7/16”
(19,05 mm)
7/8”
1-3/8”
(22,23 mm)
1”
1-3/4”
(25,4 mm)
1-1/8”
1-7/8”
(28,58 mm)
1-1/4”
1-7/8”
(31,75 mm)
Available
Special order
3
CHAMPIONX ARTIFICIAL LIFT
Selection guide
TYPE TYPE
30 40
API GRADE C API GRADE K
APPLICATION APPLICATION
Designed for reciprocating lift applications in Designed for reciprocating lift applications in
shallow-to-medium depth wells, the Type 30 is shallow-to-medium depth wells, the Type 40 is
heat-treated to maximize its fatigue resistance alloyed and effectively heat-treated to maximize
and improve its performance in non-corrosive or its fatigue resistance and improve its corrosion
effectively inhibited corrosive fluids. tolerance in effectively inhibited corrosive fluids.
TYPE TYPE
78 96
API GRADE D Alloy API GRADE High Strength Alloy
APPLICATION APPLICATION
Designed for reciprocating lift applications at any Designed for heavy load reciprocating lift applications
depth not exceeding the maximum allowable stress at any depth not exceeding the maximum allowable
rating, the Type 78 is alloyed and effectively heat- stress rating, the Type 96 is alloyed and effectively
treated to maximize its fatigue resistance and improve heat-treated to maximize its fatigue resistance and
its performance in non-corrosive or effectively inhibited improve itsperformance in non-corrosive or effectively
corrosive fluids. The Type 78 grade is recommended in inhibited corrosive fluids. The Type 96 grade can
Progressing Cavity Pump (PCP) applications. be utilized in some Progressing Cavity Pump (PCP)
applications.
4
NORRIS
TYPE TYPE
54 75/90
API GRADE D Carbon API GRADE D Special
APPLICATION APPLICATION
Designed for reciprocating lift applications at any Designed for reciprocating lift applications at any depth
depth not exceeding the maximum allowable stress not exceeding the maximum allowable stress rating, the
rating, the Type 54 is effectively heat-treated to Type 75/90 is alloyed and effectively heat-treated to
maximize its fatigue resistance and improve its maximize its fatigue resistance and improve its corrosion
performance in non-corrosive or effectively inhibited tolerance in effectively inhibited corrosive fluids. The Type
corrosive fluids. The Type 54 grade can be utilized in 75/90 grade is ideally suited for and recommended in
some Progressing Cavity Pump (PCP) applications. Progressing Cavity Pump (PCP) applications.
TYPE
97 CS
ROD
API GRADE Special Service High Strength API GRADE Special Service
APPLICATION APPLICATION
Designed for extremely heavy load reciprocating lift Designed for reciprocating lift applications at any depth
applications at any depth not exceeding the maximum not exceeding the maximum allowable stress rating,
allowable stress rating, the Type 97 is alloyed and the CS rod is engineered to enhance corrosion fatigue
effectively heat-treated to maximize its fatigue resistance and improve mechanical fatigue life while
resistance and improve its corrosion tolerance in bridging the gap between KD and High Strength rods.
effectively inhibited corrosive fluids. The Type 97 grade
can be utilized in some Progressing Cavity Pump (PCP)
applications.
5
CHAMPIONX ARTIFICIAL LIFT
AISI Series C-1541-VM A-4623-M C-1541-VM A-4330-M A-4142-M A-4320-M A-4138-M A-4330-M A-43XX
Chemical Properties % 30 40 54 75 78 90 96 97 CS
Aluminum (Al) - - 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. Proprietary
Carbon (C) 0.40/0.44 0.20/0.25 0.36/0.45 0.30/0.34 0.38/0.45 0.18/0.24 0.36/0.45 0.28/0.35 Proprietary
Chromium (Cr) 0.20 Max. 0.20 Max. 0.30 Max. 0.80/1.00 0.80/1.10 0.70/0.90 0.52/0.88 0.70/1.00 Proprietary
Copper (Cu) 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. Proprietary
Manganese (Mn) 1.40/1.60 0.60/0.80 1.35/1.65 0.80/1.00 0.80/1.00 0.80/1.00 0.88/1.52 0.70/1.00 Proprietary
Molybdenum (Mo) 0.06 Max. 0.15/0.25 0.06 Max. 0.20/0.30 0.15/0.25 0.20/0.30 0.25/0.35 0.20/0.30 Proprietary
Nickel (Ni) 0.25 Max. 1.85/2.00 0.35 Max. 1.65/2.00 0.45 Max. 1.15/1.50 0.30 Max. 1.65/2.00 Proprietary
Phosphorus (P) 0.04 Max. 0.035 Max. 0.04 Max. 0.035 Max. 0.035 Max. 0.025 Max. 0.035 0.035 Max. Proprietary
Silicon (Si) 0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.20/0.35 0.15/0.35 Proprietary
Sulfur (S) 0.040 Max. 0.035 0.04 Max. 0.04 Max. 0.035 Max. 0.025 Max. 0.04 Max. 0.04 Max. Proprietary
Vanadium1 (V) 0.05/0.07 0.05/0.07 0.04/0.09 0.04/0.09 0.02/0.07 0.04/0.09 0.04/0.09 0.04/0.09 Proprietary
Physical Properties 30 40 54 75 78 90 96 97 CS
As Normalized & Tempered
Tensile
ksi 90/115 90/115 115/140 125/140 120/140 120/140 140/150 140/150 130/145
Mpa 621/793 621/793 793/965 861/965 827/965 827/965 965/1034 965/1034 896/1000
Yield, 2% Offset
ksi 60 Min. 60 Min. 85 Min. 100 Min. 95 Min. 95 Min. 115 Min. 115 Min. 115 Min.
Mpa 414 Min. 414 Min. 586 Min. 689 Min. 655 Min. 655 Min. 793 Min. 793 Min. 793 Min.
Elongation, 8” 13 Min. 16 Min. 15 Min. 10 Min. 10 Min. 10 Min. 10 Min. 10 Min. 10%
Reduction, % 40 Min. 55 Min. 50 Min. 45 Min. 45 Min. 45 Min. 45 Min. 45 Min. 50%
Hardness, HRC (9)2/23 (9)2/23 22/30 23/31 23/31 23/31 30/34 30/34 NA
1
Tensile strength and yield strength values are the only steel sucker rod and pony rod physical requirements in API Specification 11B.
All other physical properties are expected values only and may deviate from the listed values shown above.
2
Numerals (in brackets) are HRC values not ordinarily used but are shown here for comparative reference purposes only.
6
NORRIS
Texas
Odessa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432.561.8101
Pleasanton. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 830.224.6400
7
Norris Rods The safety of our associates, customers and communities is vitally important. From
the way we operate, to the products we develop, to how we partner with customers,
4801 W. 49th Street our goal is zero: zero accidents, zero incidents and zero environmental releases.
Tulsa, OK 74107
+1 918-445-7600 At ChampionX Artificial Lift, safety is more than a metric, it’s a mindset. It’s
championX.com how we conduct ourselves, every day, everywhere it matters.
This document is provided on an “as is” basis without warranties of any kind. ChampionX Artificial Lift DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR SUITABILITY FOR ANY PURPOSE, TITLE, AND N ON-INFRINGEMENT. While reasonable care
has been taken in the preparation of this document, ChampionX does not represent or warrant that the contents of this document are accurate, complete, reliable, current or error-free.