Professional Documents
Culture Documents
* SECTION 1: Identification
· 1.1 Product identifier
· Trade name: B-1715 BOYSEN ACRYTEX TOPCOAT SEMI-GLOSS
· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
· Application of the substance / the mixture
Boysen Acrytex is an acrylic solvent-based coating that forms a seamless, non-porous, watertight film that repels
water and prevents seepage. It is noted for its excellent adhesion and long-term durability. Creates a very tight
film, serving as a moisture sealant for concrete and a stain inhibitor for wood.
· 1.3 Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Pacific Paint (Boysen) Philippines, Inc.
292 D. Tuazon St., Quezon City
1115 Philippines
· Further information obtainable from: Product safety department
· 1.4 Emergency telephone number:
Telephone Nos. : +63 2 8365 0505 to 09; +63 2 8365 0561 to 64
Facsimile Nos. : +63 2 8367 8878; +63 2 8361-7164; +63 2 8367-8881
Email Address : inquiry@boysen.com.ph
Website Address : www.boysen.com.ph
GHS02 flame
GHS07
GHS02 GHS07
(Contd. on page 2)
PH
51.1.17
Page 2/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 1)
· Signal word Warning
· Hazard-determining components of labelling:
Solvent naphtha (petroleum), light arom.
1,2,4-trimethylbenzene
· Hazard statements
H226 Flammable liquid and vapour.
H333 May be harmful if inhaled.
H315+H320 Causes skin and eye irritation.
H317 May cause an allergic skin reaction.
H402 Harmful to aquatic life.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
51.1.17
Page 3/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 2)
CAS: 117-84-0 dioctyl phthalate 2.5%
EINECS: 204-214-7 Repr. 2, H361
· Additional information:
For the wording of the listed hazard phrases refer to section 16.
CAS: 14807-96-6 Talc (Mg3H2(SiO3)4) 10-25%
EINECS: 238-877-9
CAS: 7631-86-9 silicon dioxide, chemically prepared 2.5%
EINECS: 231-545-4
CAS: 21645-51-2 aluminium hydroxide 2.5%
EINECS: 244-492-7
51.1.17
Page 4/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 3)
See Section 13 for disposal information.
51.1.17
Page 5/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 4)
98-82-8 cumene
PEL (USA) Long-term value: 245 mg/m³, 50 ppm
Skin
REL (USA) Long-term value: 245 mg/m³, 50 ppm
Skin
TLV (USA) Long-term value: 246 mg/m³, 50 ppm
IOELV (EU) Short-term value: 250 mg/m³, 50 ppm
Long-term value: 100 mg/m³, 20 ppm
Skin
· Additional information: The lists valid during the making were used as basis.
· 8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection:
PH
(Contd. on page 6)
51.1.17
Page 6/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
51.1.17
Page 7/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 6)
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
51.1.17
Page 8/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 7)
Danger to drinking water if even extremely small quantities leak into the ground.
Harmful to aquatic organisms
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.
51.1.17
Page 9/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 8)
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I None of the ingredients is listed.
· Seveso category P5c FLAMMABLE LIQUIDS
· Qualifying quantity (tonnes) for the application of lower-tier requirements 5,000 t
· Qualifying quantity (tonnes) for the application of upper-tier requirements 50,000 t
· National regulations:
· Information about limitation of use:
Workers are not allowed to be exposed to the hazardous carcinogenic materials contained in this preparation.
Exceptions can be made by the authorities in certain cases.
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
51.1.17
Page 10/10
Safety Data Sheet
according to GHS
Printing date 06.01.2021 Version number 8 Revision: 06.02.2020
(Contd. of page 9)
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
Flam. Liq. 3: Flammable liquids – Category 3
Flam. Liq. 4: Flammable liquids – Category 4
Acute Tox. 4: Acute toxicity - inhalation – Category 4
Acute Tox. 5: Acute toxicity - inhalation – Category 5
Skin Irrit. 2: Skin corrosion/irritation – Category 2
Eye Irrit. 2: Serious eye damage/eye irritation – Category 2
Eye Irrit. 2B: Serious eye damage/eye irritation – Category 2B
Skin Sens. 1: Skin sensitisation – Category 1
Muta. 1B: Germ cell mutagenicity – Category 1B
Carc. 1B: Carcinogenicity – Category 1B
Repr. 2: Reproductive toxicity – Category 2
STOT SE 3: Specific target organ toxicity (single exposure) – Category 3
Asp. Tox. 1: Aspiration hazard – Category 1
Aquatic Acute 3: Hazardous to the aquatic environment - acute aquatic hazard – Category 3
Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2
· * Data compared to the previous version altered.
24.08.2016
PH
51.1.17