FM 72-001
OXBOT Masks for Digital Su-25M1 of Ukrainian Air Force,“
Application Instructions masks
1. Clean the surface of the model
2. Apply the mask witha field in the foil (or masking
tape). Remove the protective layer. Apply @
protective layer on the model, positioning it on the
surface. Remove foi (tape). Remove the stencil
leaving the field. The gaps between the individual
spots disguise in any way possible.
3. At the edge of the model's curved surface of the
mask slightly warmed for a better fit
4, Blow out the model with the paint.
5. After drying immediately remove the mask. Do not
leave them on the surface of a model fora long time.
6. To spray is recommended nitro enamel. When
painting with acrylic paints masks should be used
with caution: itis possible to damage the bottom
layer of paint. The adhesive force of the masks can
bbe somewhat weakened, by “attaching” several
times a film on palm.
Vincrpyxuus no ucnonsoBaniio MacoK
1. O6esxupure nowepxHocrs monenn,
2. Hawacrn mackn aMecTe c noreM Ha MOHTaKHYO
Innevry (unk ManspHi cKoTY), CHATS saUlMTHbsA
‘ono, HaHECTH Ha Monenb, NosMIMOHUPyR ee Ha
oBepxHOCTH, YaanuTl MOMTAKHYIO TINEHKY (CKOTS),
couse tpacbaper, octaane none, MpoMexyTii MEXaY
OTAERbHEIMM NaTHAMN saMacKHpOBaTe nioGLIM
‘ocrynstim cnoco6om,
3. Ha xprigonunelinon MosepxiocrH Kpan Mack
cnerxa nogorpere ana nysweronpaneranv
4, any moans Kpackon
5, Mlocne sbicsixarina packs cpasy yaannT’ Mack,
He OcTasnATs Mx Ha NoBepxHocT Mogenn Ha
AnwTensiioe apeMn,
6. fina oxpackn peKomexayetcn ucnonssosaTe
Hurpooman. Tipu oxpacke axpunioabinn Kpackau
MaCKH CNOMBSOBaTS OCTOPOKHO: BOSMOKHO