Professional Documents
Culture Documents
Offer N. ---
TECHNICAL DATA Model HP100-6/2R
Liquid specifications
Temperature design [°C] 90 Viscosity [cSt] <= 20 mm2/s
Relative density S.G. 1 PH 7
Materials
Execution 2_1
Impeller EN (G G25) - ASTM (A48 : Nr.35)
Diffuser EN (G G25) - ASTM (A48 : Nr.35)
Stage Casing EN (G GG42) ASTM (A536 : Gr.65-A5-12)
Discharge Casing EN (G GG42) ASTM (A536 : Gr.65-A5-12)
Suction Casing EN (G GG42) ASTM (A536 : Gr.65-A5-12)
Bearing housing EN (G G25) - ASTM (A48 : Nr.35)
Wear rings EN (G Cu Sn 10) ASTM (B584 : C90500)
Shaft EN (X 30 Cr13) ASTM (420)
Shaft Sleeve EN (X 30 Cr13) ASTM (420)
Balance piston EN (X 30 Cr13) ASTM (420)
Motor data
Design B3 Voltage [V] 400/690-50Hz - 380/660-60Hz
Type 315M Current [A] ---
Nom. Power kW 132 Protection IP 55
Speed [rpm] 2970 Class Eff. IE3
Material Ghisa Weight [kg] 1100
Notes
The information may be subject to change without notice. It is always advisable to contact our commercial department in order to get further information about the
products, their technical specifications and warranty conditions. The Company is expressly relieved of any liability for the purchasing of a product not in line with the
customer's needs, if not consulted beforehand for a specific consultancy.
PERFORMANCE CURVES Diagram no: HP100-6/2R
Date: 4/30/2020
Pump type: HP100-6/2R
rpm / 1': 2970
Motor type: kW 132 2p Gr.315M
Q (m3/h) 90 - H (m) 163 - Power [kW] 70.3 - Efficiency % 56.8 - NPSH (m) 1.7
e
g2 293 mm B1
DN1 1018 mm
a 235 mm B
DN2 503 mm
POMPA f 410 mm B ntot 315 mm
PUMP Lp
l1 1018 mm
PUMP
POMPE H1
h1 503 mm L Ltot 2213 mm
BOMBA GENERALE
H2
h2 315 mm GENERAL
GENERAL
H
H3 1033 mm da
m1 150 mm
Hp mm X
g1 70 mm
Lm
l2 1190 mm db
m3 710 mm
MOTORE - MOTOR
MOTOR MEC 315M mm øYs 6x21 mm
MOTEUR - MOTOR
Hm mm dtot
m 1720 mm
POMPA
PUMP - PUMP - POMPE - BOMBA Kg
286 Kg
PESO - WEIGHT
WEIGHT MOTORE
MOTOR - MOTOR - MOTEUR - MOTOR Kg
1100 Kg
POIDS - PESO
TOTALE
TOTAL - TOTAL 1519 Kg
Dimensions are indicative, they can be rectified when the order is confirmed.
DIMENSIONI DI INGOMBRO
REVISION 8 - 4/2/2015
OVERALL DIMENSIONS
HP100-6/2R + kW 132 2p Gr.315M
Oriet.Bocche/Dir.Nozzels 1
Company name:
Created by:
Phone:
Date: 30/04/2020
Qty. Description
1 GT-U+ 100 PN25
Grundfos GT-U+ 100 PN25 is a Bladder pressure tank, with a capacity of 100.0 l and Vertical installation. The
tanks are approved for drinking water. The GT-U+ 100 PN25 is designed for a maximum operation pressure of 25
bar and a maximum liquid temperature of 90 °C.
A pressure tank ensures controlled pressure in the water supply and thereby limits the switching frequency of the
pump in case of low water consumption or leakage loss. The result is increased comfort in your installation by
limiting the start/stop frequency of your pump, and it increases system comfort by compensating for pressure
drops when a tap is opened, while reducing problems with water hammer in the pipework.
Liquid:
Maximum liquid temperature: 90 °C
Technical:
Membrane type: Bladder
Materials:
Material: Carbon steel
Installation:
Maximum operating pressure: 25 bar
Size: 100.0
Others:
Net weight: 71 kg
Gross weight: 76.5 kg
Applicat. typ: Standard
Date: 30/04/2020
Description Value
General information:
Product name: GT-U+ 100 PN25 458
Product No: 99082716
EAN number: 5712606401789
5712606401789
Technical:
Membrane type: Bladder
Materials:
Material: Carbon steel
Installation: G 1"
458
G 1"
Date: 30/04/2020
458
985
130
G 1"