Professional Documents
Culture Documents
Page 1 of 3
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315-A L EXCAVATOR 6YM
Configuration: 315 315L TRACK-TYPE EXCAVATOR 6YM00001-UP (MACHINE) POWERED BY 3046 ENGINE
Specifications
315 AND 315 L EXCAVATORS HYDRAULIC SYSTEM
Media Number -SENR6184-00 Publication Date -25/10/1994 Date Updated -12/10/2001
Swing Drive
SMCS - 3108-010; 5070
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 13/6/2023
315 315L TRACK-TYPE EXCAVATOR 6YM00001-UP (MACHINE) POWERED BY ... Page 2 of 3
Use appropriate thickness spacers (2) and (3) to get a bearing rolling torque of 6.03 ± 2.6 N·m (4.44 ±
1.9 lb ft). This adjustment should be done without oil seal (6).
(4) Apply 1U-8846 Gasket Maker on mating surfaces of cage and housing.
Apply 5P-3413 Sealant on the inner surface of cage where seal (6) installs.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 13/6/2023
315 315L TRACK-TYPE EXCAVATOR 6YM00001-UP (MACHINE) POWERED BY ... Page 3 of 3
(6) Lubricate the seal lip with a small amount of grease being sealed.
(7) Apply 5P-3931 Anti-Seize Compound to the splines of carrier and shaft before installation of
carrier.
Copyright 1993 - 2023 Caterpillar Inc. Tue Jun 13 14:41:34 UTC-0300 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 13/6/2023