Professional Documents
Culture Documents
51. The use of coatings on milling cutters will increase the ____ of the tool.
A. Surface hardness
B. Corrosion resistance
C. Surface finish
D. Melting point
Answer: D
q M
cof two or more milling cutters mounted on the
53. Gang milling refers to the use
____ arbor in a ____ millingM set up.
A. Same, vertical
B. Same, horizontal
C. Different, vertical
D. Different, horizontal
Answer: A
55. A turret mill has a ____ spindle and the table is moved ____ to the spindle axis
to accomplish cutting.
A. Stationary, perpendicular
B. Moving, parallel
C. Stationary, both perpendicular and parallel
D. Moving, perpendicular
Answer: C
56. In the bed mill, the table moves ____ to the spindle’s axis
A. Only parallel
B. Only perpendicular
C. Both perpendicular and parallel
D. Inclined
Answer: B
68. The T-slots in the table of planning machines are cut in.
A. Shaping machine
B. Planning machine
C. Slotting machine
D. None of these
Answer: D
72. Slotting machines are used to cut internal gear teeth for
A. Batch production
B. Lot production
C. Mass production
D. None of these
Answer: C