You are on page 1of 12

Instituto tecnológico superior de Coatzacoalcos

Alumno: Morales Camargo José Miguel


Castillo Hernández José Arturo
Docente: Karina Sastré Antonio
Asignatura: Ingeniería de perforación de pozos
Carrera: Ingeniería Petrolera
Actividad: Cuestionario Oilwell Drilling 2, 5, 6, 7 y 10
Unidad 5
Semestre: 6to
Grupo: AP
Turno: Matutino
Horario: Lunes 7:00 a 9:00
Miércoles 7:00 a 9:00
Viernes 7:00 a 9:00

1
DISCO 2
Question 1
R=

Question 2
What type of preventer is this?
R= C. Blind Ram

2
Question 3
During the drilling operation, formation fluids are kept out of the
annulus by the:
R= D. Drilling Mud

Question 4
Which one of the photos shows where hydraulic fluid is stored to
operate BOP valves?
R= Accumulator

3
Question 5
Which of these does not use a surface BOP system?
R= A. Sermisubmersible.

Question 6
Which of these valves is located just above the bit?
R= D. Float valve

4
Question 7
Unusual changes in mud level while tripping can be monitored at?
R= B. The trip tank.

Question 8
When the preventers are closed. Well fluids flow to the:
R= A. Choke Manifold.

5
Question 9
If the Kelly is not made up on the dill string and flow comes up the drill
string, what can be used to stop the flow?
R= B. Full-Opening Safety Valve

Question 10
Which one of these is an IBOP?
R=

6
Question 11
Identify this piece of equipment.
R= D. Mud-Gas Separator

Your Score:
10/11
91%

7
DISCO 5
Question 1
What is the name this piece of equipment?
R= D. Crownn block.

Question 2
Amotion compensator maintains a constant distance between:
R= A. Hook and sea floor.

8
Question 3
To distribute wear on the drilling line, what kind of operation is
performed?
R= B. Sipping and cutting the line.

Question 4
The most modern drawworks braking systems use an electrodynamic
brake.
R= B. False

9
Question 5
What is the name this piece if equipment?
R= D. Deadlihe anchor.

Question 6
Where would you find capiler-and-pad assembly?
R= C. Drawworks disk brake system.

10
Question 7
Where is the crown saver located?
R= A. On the drawworks.

Question 8
What is this piece of equipment?
R= C. Elevator.

11
Question 9
While hosting the drill string in open hole the hook should be allowed
to rotate freely.
R= A. True.

Your Score:
9/9
100%

12

You might also like