Professional Documents
Culture Documents
LRT Jakarta
Jakarta 2023
REFERENCES CALCULATIONS RESULTS
User Information:
Designer Name: Agung
Company: MFK
Project Name: LRT Jakarta
Client name: LRT Jakarta
File Name: New file
Design Information:
Steel design code: American Institute of Steel Construction (AISC) 15th Edition
Design method: Load and Factored Resistance Design (LFRD)
Concrete design code: American Concrete Institute (ACI) 318 - 2019
Unit System: Metric
INPUTS:
Geometric Properties :
bf,top
y
tf,top
z
d
tw
tf,bot
bf,bot
Dimension notations of i-shape
Properties of I-sections :
Plate Depth
Plate Width
Plate Thickness
Support Depth
Support Width
Material :
Concrete :
Miscellaneous Data :
Reduction Factor :
Ductile Type
Table
Strength Reduction Factor for Ductile | Tension
17.5.3(a)
Table
Strength Reduction Factor for Ductile | Shear
17.5.3(a)
Anchor Strength governed by Concrete Breakout, Bond and Side Face Blowout:
Table
Strength Reduction Factor for Cast-in | Tension
17.5.3(b)
Table
Strength Reduction Factor for Cast-in | Shear
17.5.3(b)
Table
Strength Reduction Factor for Cast-in | Tension
17.5.3(c)
Table
Strength Reduction Factor for Cast-in | Shear
17.5.3(c)
X-axis
Z-axis
Mz Z-axis
Mz
Y-axis
Nx Vy
Vy
Y-axis
(a) (b)
where arrowhead presents as (+) positive direction in (a) X-Y-Z axis (b) Y-Z axis
Force dl ll e w lr rl sl
Components
Nx 5.000 1.000 - - - - -
Vy - - - - - - -
Vz - - - - - - -
My - - - - - - -
Mz 5.000 - - - - - -
Vy - - - - - - -
Vz - - - - - - -
My - - - - - - -
Legend:
FLC1 : 1.4D
FLC2 : 1.2D + 1.6L + 0.5(Lr or R)
FLC3 : 1.2D + 1.6(Lr + R) + (1.0L or 0.5W)
FLC4 : 1.2D + 1.0W + L + 0.5(Lr or R)
FLC5 : 1.2D + 1.0E + 1.0L
FLC6 : 0.9D + 1.0W
FLC7 : 0.9D + 1.0E
Area of Support,
Computation of Value on the all sides than the loaded area support area,
Governing value of the all sides than the loaded area support area,
AISC 360-16 §
Allowable bearing stress,
J8-2
Bearing on concrete on column base
AISC 360-16 §
Allowable bearing stress limit
J8-2
Fp should not exceed in Fp,limit, if exceed, use Fp,limit
1 -125.00 -135.00
2 125.00 -135.00
3 125.00 135.00
4 -125.00 135.00
Anchor Parameters:
The maximum distance from the anchor to one of the closest edge
The minimum distance from the anchor to one of the closest edge
Depth of the physical anchor
The max spacing between the anchors
Depth of anchor embedment
ACI 318M-19
Ultimate Anchor Steel Strength (Tension)
Eqn. 17.6.1.2
ACI 318M-19 Section 17.6 | Tensile Strength
ACI 318-19
Ultimate Anchor Steel Strength (Shear)
Eqn. 17.7.1.2b
ACI 318M-19 Section 17.7 | Shear Strength
ACI 318M-19
Eqn. Modification Factor for edge effects for anchors groups loaded in tension
17.6.2.4.1b
ACI 318M-19 Section 17.6.2.4 | Breakout edge effect factor
ACI 318M-19
Eqn. Basic concrete breakout strength
17.6.2.2.1
ACI 318M-19 Section 17.6.2.2 | Basic single anchor breakout strength,
ACI 318M-19
Nominal concrete breakout strength in tension,
Eqn. 17.6.2.1b
ACI 318M-19 | Section 17.6.2 Concrete breakout strength of anchors in tension
ACI 318-2019
Section Breakout Cracking factor
17.6.2.5
ACI 318-2019
Section Breakout Splitting Factor
17.6.2.6.2
Cast-In
Ultimate Concrete Breakout Strength
ACI 318M-19
Eqn. Pullout Strength in Tension,
17.6.3.2.2a
ACI 318M-19 Section 17.6.3 | Pullout strength of a single cast-in anchor or a single post-installed expansion, screw, or undercut anchor in tension,
ACI 318M-19
Section Coefficient for Pry Strength
17.7.3.1
hef >= 65mm
ACI 318M-19
Nominal Pryout Strength,
Eqn. 17.7.3.1b
ACI 318M-19 Section 17.7.3 | Concrete pryout strength of anchors in shear,
Load Anchor Tension Anchor Shear Steel (Tension) Steel (Shear) Breakout Pull Pry Anchor Utility Remarks
Case No. Load (kN) Load (kN) Check Ratio Check Ratio Check Ratio Check Ratio Check Ratio Ratio