Professional Documents
Culture Documents
Design Information :
Isolated Foundation
Design code : ACI-318-2014 (American Concrete Institute)
Unit System : Imperial
Project Details :
Project Name :
Client :
Designer :
Company :
Notes :
INPUT:
Column
Foundation
GEOMETRY:
Foundation:
- Foundation Depth,
- Foundation Width,
- Foundation Thickness,
Column:
- Column Width,
- Column Depth,
- Column Height,
- Column Offset Along Z-axis,
- Column Offset Along X-axis,
MATERIAL PROPERTIES:
Concrete:
- Specified compressive strength of concrete,
Steel:
- Specified yield strength for nonprestressed reinforcement,
Densities:
- Soil unit weight,
- Concrete unit weight,
- Water unit weight,
SOIL PARAMETERS:
- Soil thickness,
- Angle of internal friction,
- Coefficient of friction,
- Surcharge area load,
- Allowable Soil Bearing capacity (gross),
REINFORCEMENTS:
Footing:
Bottom reinforcement (x-direction): 0.625in∅; at 12in spacing
Bottom reinforcement (z-direction): 0.625in∅; at 12in spacing
Column:
Main reinforcement: 6pcs -0.625in∅;
Secondary reinforcement: 0.625in∅; at 6in spacing
MISCELLANEOUS:
- Area of a square
- Area of a square
- Volume of foundation,
- Volume of column,
SELF WEIGHTS
- Surcharge load,
Mz Vz
Z-axis
Mz
Vz X-axis
P Vx
Mx
Mx Vx
X-axis
(a) (b)
) 11.200 16.900
) 0.000 0.000
) 0.000 0.000
) 0.000 0.000
) 0.000 0.000
EFFECTIVE DEPTH
Top of footing
Top - Top
Top - Bottom
Bottom - Top
Bottom - Bottom
Bottom of footing
Designation of rebar positions
- Foundation effective depth at Bottom - Bottom
P4 P1
x-axis
Column
Footing
P3 P2
Summary:
Corner Pressure p1 p2 p3 p4
Status: PASS
Ratio = 0.966
SLIDING CHECK
OVERTURNING CHECK
Status: PASS
Ratio = 0.911
Overturning along the z-direction:
Note: Eccentricity on z-axis = 0; thus, overturning is not checked.
Status: PASS
Ratio = 0.000
- Shear Capacity
Status: PASS
Ratio = 0.530
d/2
d/2
d + Cz
Cz
Cx
PLAN
Parameters:
22.6.5.3 - Column position factor (edge)
- Concrete weight type factor,
22.6.4.1 - Critical shear perimeter,
FLEXURE CHECK
ELEVATION
Critical Section for Bending
Moment
Column width (cx)
- No. of reinforcement
Status: PASS
Ratio = 0.814
Since 2500 psi 4000 psi:
Table 22.2.2.4.3 - Equivalent rectangular concrete stress distribution
Since (Tension-controlled):
Table 21.2.2 - Strength reduction factor:,
- Moment Capacity
Status: PASS
Ratio = 0.701
Since 2500 psi 4000 psi:
Table 22.2.2.4.3 - Equivalent rectangular concrete stress distribution
Since (Tension-controlled):
Table 21.2.2 - Strength reduction factor:,
- Moment Capacity
Status: PASS
Ratio = 0.828
Where:
- Bearing area of column,
- Footing area,
21.2.1(d) - Bearing strength reduction factor,
Table 22.8.3.2
DEVELOPMENT LENGTH
25.4.9.1
25.4.9.1
- Required depth,
Status: FAIL
Ratio = 1.202
Flexural reinforcement bar development:
- Bar development length,
Status: PASS
Ratio = 0.791
Development length provided along z-direction:
- Development length provided,