You are on page 1of 2

BioFire Diagnostics, LLC | 515 Colorow Drive, Salt Lake City, Utah 84108, USA | 1-801-736-6354

65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA 65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
65
B-00

®
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA
-0065
-SUB
FLM1
, LLC 8
ostics 8410
Diagnra Way Utah
re City,
BioFi Waka
390 Lake
Salt
USA
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti

x3
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

x3 ‰‰ Follow instructions on computer for initiating a test.


x3 Step 5: Run Pouch
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
65
B-00
1-SU

‰‰ Wait as Sample Mix is drawn into pouch.


FLM
LLC 8
ics, 8410
nost 65
Diagara Way Utah B-00
ire City, 1-SU
BioF Wak FLM
390 Lake
Salt LLC 8
USA cs,
nosti 8410
Diag ra Way Utah
ire City,
BioF Waka
390 Lake 65
Salt B-00
USA
1-SU
-0065 FLM
-SUB LLC 8
FLM1 cs,
nosti 8410
, LLC 8 Diagara Way Utah
ire City,

‰‰ Forcefully push down to puncture seal.


ostics 8410
BioF Wak
Diagnra Way Utah 390 Lake
re City, Salt
BioFi Waka USA
390 Lake
Salt
USA
65
B-00
1-SU
FLM
LLC 8
cs, 8410

‰‰ Insert Sample Injection Vial into pouch sample port.


nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
in Pouch Loading Station.
x3
‰‰ Pause for 3-5 seconds, then remove Sample Injection Vial, leaving cap
0:05
‰‰ Unscrew Sample Injection Vial from cap.
Step 4: Load Sample Mix
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

x3
65
B-00
1-SU
FLM
LLC 8
ics, 8410
nost
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

serious eye damage and/or skin irritation.


65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA

Warning: The Sample Buffer is harmful if swallowed, can cause


65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City, 65
BioF Waka B-00
390 Lake 1-SU
Salt
USA FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
-0065
-SUB
FLM1
, LLC 8
ostics 8410
Diagnra Way Utah
re City,
BioFi Waka
390 Lake
Salt
USA
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA
‰‰ Return Sample Injection Vial to red well of Pouch Loading Station.
‰‰ Mix sample by gently inverting Sample Injection Vial 3 times.
x3 ‰‰ Tightly close lid of Sample Injection Vial.
‰‰ Add to Sample Injection Vial.
x3
‰‰ Using transfer pipette, draw up specimen to 2nd line.
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti

‰‰ Thoroughly mix stool specimen in transport media.


Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA squeeze. Avoid generating excessive bubbles.
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA

Injection Vial using a slow, forceful squeeze, followed by a 2nd


65
B-00
1-SU
FLM
LLC 8
ics, 8410
nost
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

• With the tip facing down, dispense Sample Buffer into Sample
65
B-00
1-SU
FLM

• Firmly pinch textured plastic tab on side of ampoule until seal snaps.
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA

Note: Do not touch the tip of the ampoule.


• Invert Sample Buffer Ampoule so that tip is facing up.
‰‰ Add Sample Buffer to Sample Injection Vial:
Step 3: Prepare Sample Mix
65
B-00

‰‰ Wait as Hydration Solution is drawn into pouch.


1-SU
FLM
-0065
LLC 8 -SUB
cs, 8410
nosti FLM1
Diag ra Way Utah
ire City, , LLC 8
BioF Waka ostics 8410
390 Lake
Salt Diagnra Way Utah
USA re City,
BioFi Waka
390 Lake
Salt
USA

‰‰ Forcefully push down to puncture seal.


65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
65 ire City,
B-00 BioF Wak

and insert into pouch hydration port.


390 Lake
1-SU Salt
FLM USA
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA

‰‰ Twist off Hydration Injection Vial, leaving cap in Pouch Loading Station,
Step 2: Hydrate Pouch
65
B-00
1-SU
FLM
LLC 8
ics, 8410
nost
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA
-0065
-SUB
FLM1

‰‰ Place Hydration Injection Vial into blue well.


, LLC 65 8
ostics B-00 8410
1-SU
Diagnra Way Utah
re FLMCity,
BioFi WakaLake
390
LLC 8
cs, SaltUSA
8410
65 nosti
B-00 Diag ra Way Utah
1-SU ire City,
FLM BioF Waka
390 Lake
Salt
LLC USA
8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

‰‰ Place Sample Injection Vial into red well.


65
B-00
1-SU
FLM
LLC 8

‰‰ Insert pouch into Pouch Loading Station.


cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA
Step 1: Prepare Pouch
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diag ra Way Utah
ire City,
BioF Waka
390 Lake
Salt
USA
To avoid contamination always wear gloves and work behind a protective shield.
65
B-00
1-SU
FLM
LLC 8
cs, 8410
nosti
Diagara Way Utah
ire City,
BioF Wak
390 Lake
Salt
USA

FilmArray Gastrointestinal Panel Quick Guide


®
®
FilmArray Gastrointestinal Panel Quick Guide
TM

The Run Summary Section displays


information about the sample and a summary of
the control and test results.

1. Detected:
• Names of any detected pathogens Example
• If 'None', no pathogens were
1. 2.
detected
• If ' Invalid', RETEST SAMPLE
2. Controls:
• If 'Passed', results are valid
• If ' Failed', RETEST SAMPLE
• If ' Invalid', RETEST SAMPLE

The Results Summary Section lists the


test results for each organism targeted by the
Gastrointestinal Panel.
3.
3. ' Detected', pathogen was detected
4.
4. 'Not Detected', pathogen was not detect-
ed
5. 'ø N/A', pathogen was not reported. Refer
to Instruction Booklet for more informa-
tion. 5.

If ' Invalid', RETEST SAMPLE

Note: If repeated 'Invalid' results are


obtained, contact BioFire Diagnostics, the
local bioMérieux sales representative, or an
authorized distributor.

The Run Details Section displays information


about the pouch, instrument, run status and operator.
6. Run Status: If Completed, run is com-
plete.
If Incomplete, Aborted, Instrument
Communication Error, Instrument Error 6. JDoe
ITI FA "FA1115"
or Software Error, RETEST SAMPLE

Note: If repeated 'Error' messages are


obtained, contact BioFire Diagnostics, the
local bioMérieux sales representative, or an
authorized distributor.
RFIT-PRT-0141-07

®
© Copyright 2017 BioFire Diagnostics, LLC. All rights reserved.

BioFire Diagnostics, LLC | 515 Colorow Drive, Salt Lake City, Utah 84108, USA | 1-801-736-6354

You might also like