Professional Documents
Culture Documents
Crawler Crane
150 Tons Lifting Capacity
Quality Changes the World
SCC1500A-1 P09
Technical
Parameters
▪ Outline Dimension
▪ Transport Dimension
▪ Transport Plan
▪ H Configuration
P18 Cofigurations
▪ FJ Configuration
A
SCC1500A-1
SANY CRAWLER CRANE
技术参数
150 TONS LIFTING CAPACITY
QUALITY CHANGES THE WORLD
Main Characteristics
▪▪ Page 04 Product Specification
▪▪ Page 07 Safety Device
> 03
04 SCC1500A-1 Crawler Crane
150 Tons Lifting Capacity
_________________
Main Characteristics
Product Specification
Product Specification
Upperworks
▪▪ High-strength steel weld framework, with no torsion or
deformation. The parts are laid out in the way that is easier for
maintenance and service.
Product Specification
Fixed Jib
▪▪ Lattice structure. The chord adopts high-strength structural tube
and each section is connected through pins;
▪▪ Basic jib: 5m jib base +3m insert +5m jib top;
▪▪ Jib insert: 6m×3;
▪▪ Fixed jib: 13m~31m;
▪▪ Longest boom + jib: 64m +31m.
Extension Jib
▪▪ The welding structure is connected with main boom through
hinge pin, and used for aux. hook operation;
▪▪ Length of extension boom: 2.7m.
Hook Block
▪▪ 150t hook, 7 pulleys;
▪▪ 80t hook, 3 pulleys;
▪▪ 35t hook, 1 pulley;
▪▪ 13.5t ball hook.
Safety Device
Hook Latch
▪▪ The hook is provided with a baffle to prevent wire rope from
falling off.
Safety Device
Illuminating Light
Engine Status Monitoring
▪▪ The machine is equipped with the low beam light and high
▪▪ The engine status will be presented, such as engine coolant
beam light at the front of the cab, illumination light at cab, and
temperature, fuel volume, total work hours, engine oil pressure,
other night lights, boom lights to improve the visibility during
engine speed, battery charging, voltage.
construction.
Technical Parameters
▪▪ Page 10 Major Performance Specifications
▪▪ Page 11 Outline Dimension
▪▪ Page 12 Transport Dimension
▪▪ Page 16 Transportation Plan
> 09
10 SCC1500A-1 Crawler Crane
150 Tons Lifting Capacity
_________________
Technical Parameters
Unit: mm
Outline Dimension
4388
3000
6
85
m
R5
~76
16m
3750
2232
1458
1320
950 1350
454
5650 5850
6906
7864
Transportation Dimensions
Width(W) 3.00m
Height(H) 3.15m
L
Weight 29.9t
Width(W) 3.00m
Height(H) 3.25m
L Weight 32.9t
Height(H) 3.25m
L Weight 36.7t
Note: the above three modes are all with regular
counterweight for standard offering.
Crawler Assembly ×2
Length(L) 7.86m
H
Width(W) 1.32m
L Height(H) 1.32m
Weight 14.4t
Boom Base ×1
Length(L) 8.21m
H
Width(W) 2.23m
Height(H) 2.24m
L
Weight 3.81t
Boom Top ×1
Length(L) 8.51m
H
Width(W) 2.11m
L
Height(H) 2.33m
Weight 2.58t
Transportation Dimensions
3m Boom insert ×1
Length(L) 3.14m
H
Width(W) 2.21m
Height(H) 2.08m
L Weight 0.63t
6m Boom insert ×2
Length(L) 6.14m
Width(W) 2.21m
H
Height(H) 2.08m
Weight 1.06t
L
9m Boom insert ×5
Length(L) 9.14m
Width(W) 2.21m
H
Height(H) 2.08m
Weight 1.74t
L
Extension jib ×1
Length(L) 2.36m
H
Width(W) 1.04m
Height(H) 0.98m
L Weight 0.3t
Width(W) 2.06m
L Height(H) 1.45m
Weight 0.87t
Width(W) 1.19m
L Height(H) 1.30m
Weight 0.71t
Transport Dimensions
Length(L) 5.43m
Width(W) 1.01m
L
Height(H) 0.99m
Weight 0.53t
Height(H) 0.92m
Weight 0.19t
Weight 0.34t
Carbody Counterweight ×2
Length(L) 4.25m
Width(W) 1.5m
H
Height(H) 0.55m
L
Weight 10t
Width(W) 2.31m
L Height(H) 1.18m
Weight 12.7t
Transportation Dimensions
(1+1)×3
counterweight for standard offering)
Length(L) 2.31m
Width(W) 2.09m
B
Height(H) 0.59m
Weight 7.1t
L
Height(H) 0.37m
Weight 3t
L
Length(L) 5.8m
L Width(W) 2.31m
Height(H) 0.5m
Weight 12t
Width(W) 2.28m
Height(H) 0.60m
L
Weight 5.25t
Height(H) 0.38m
Weight 3t
L
Width(W) 0.88m
Height(H) 1.68m
L B Weight 2.1t
Transport Dimensions
H B 150t Hook ×1
Length(L) 2.45m
Width(W) 0.91m
Height(H) 0.95m
L
Weight 2.91t
80t Hook ×1
B H
Length(L) 2.13m
Width(W) 0.82m
Height(H) 0.62m
L
Weight 1.64t
H B 35t Hook ×1
Length(L) 1.88m
Width(W) 0.82m
L
Height(H) 0.46m
Weight 1.11t
B H
13.5t Ball hook ×1
Length(L) 0.95m
Width(W) 0.43m
L
Height(H) 0.43m
Weight 0.45t
Remarks:
1.The transport dimensions for the parts are for reference that do not draw to the
scale. The dimensions listed above are deisnged values excluding packing.
2.Weight is design values. It maybe different due to manufacturing tolerances.
Transport Plan
4073
Components included ▪▪ Basic machine (3 winches, carbody, outrigger,
A-frame, all wire ropes), boom base
1040
Transport weight ▪▪ 36.7t
800
Transport cart 2
3697
Transport weight ▪▪ 30.86t
1250
Transport cart 3
3913
▪▪ 150t hook: 2.91t
1250
Transport weight ▪▪ 26.08t
Transport cart 4
3912
▪▪ 13.5T hook: 0.45t
1250
Transport weight ▪▪ 27.37t
Transport cart 5
Transport cart 6
Cofigurations
▪▪ Page 20 H Configuration
▪▪ Page 24 FJ Configuration
> 18
SCC1500A-1 Crawler Crane
150 Tons Lifting Capacity
19
_________________
Boom/jib Combination
Boom Combination
H configuration FJ configuration
( 76m ) ( 64m+31m )
H Configuration
16m B T
19m B 3m T
22m B 6m T
25m B 3m 6m T
8m boom top
28m B 3m 9m T
31m B 6m 9m T
★31m B 3m 6m 6m T
34m B 3m 6m 9m T
37m B 6m 6m 9m T
★37m B 3m 3m 6m 9m T
40m B 6m 9m 9m T
★40m B 3m 6m 6m 9m T
43m B 3m 6m 9m 9m T
46m B 6m 6m 9m 9m T
★46m B 3m 3m 6m 9m 9m T
49m B 3m 6m 6m 9m 9m T
52m B 3m 6m 9m 9m 9m T
55m B 6m 6m 9m 9m 9m T
★55m B 3m 3m 6m 9m 9m 9m T
58m B 3m 6m 6m 9m 9m 9m T
61m B 3m 6m 9m 9m 9m 9m T
64m B 6m 6m 9m 9m 9m 9m T
★64m B 3m 3m 6m 9m 9m 9m 9m T
67m B 3m 6m 6m 9m 9m 9m 9m T
70m B 3m 6m 9m 9m 9m 9m 9m T
9m insert
73m B 6m 6m 9m 9m 9m 9m 9m T
★73m B 3m 3m 6m 9m 9m 9m 9m 9m T
76m B 3m 6m 6m 9m 9m 9m 9m 9m T
B 8m Boom base
6m insert
T 8m Boom top
3m 3m Insert Boom
3m insert
6m 6m Insert Boom
8m boom base
9m 9m Insert Boom
H Working Radius
67m 70
64m
50° 65
61m
58m
60
55m
52m 40° 55
49m
50
46m
43m
45
40m 30°
37m 40
34m
35
31m
28m
30
25m
22m 25
19m
20
16m
15
10
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
Radius (m)
Unit: t
H Load Chart
Note:
1.The rated load in the load chart is calculated complying with EN 13000;
2.The working radius is the horizontal distance from the load center to the swing center;
3.The actual lifting capacity must subtract the weight of hooks and other riggings from the rated capacity in the load chart.
4.The load value is calculated when the object is hung freely,without considering the influence of wind on the load, ground conditions and slope, operation speed and the influence of any
other negative factors over safe operation. Therefore, the operator bears the responsibility of making a judgement and decreasing the load and lowering speed.
5.All ratings are calculated when the machine is parking on firm and level ground with less than 1% gradient.
8 101.0 100.3 99.7 98.5 95.6 92.8 90.1 87.6 82.6 73.1 69.8 65.2 8
9 84.5 84.0 83.5 83.0 82.6 81.0 78.9 76.9 74.9 71.3 67.8 63.3 59.9 56.6 52.2 9
10 72.6 72.1 71.8 71.4 71.0 70.6 70.0 68.3 66.7 65.2 63.7 59.9 56.6 54.3 49.8 48.2 45.1 40.1 10
12 56.4 56.1 55.8 55.5 55.2 54.9 54.6 54.3 54.0 53.4 52.3 51.2 50.2 49.1 48.1 46.9 43.9 38.9 36.5 34.2 31.3 12
14 46.0 45.7 45.5 45.2 45.0 44.7 44.5 44.2 44.0 43.7 43.5 43.2 42.4 41.6 40.8 40.0 39.2 36.5 35.1 33.6 30.4 14
16 38.5 38.3 38.0 37.8 37.6 37.4 37.1 36.9 36.7 36.5 36.2 36.0 35.8 35.2 34.5 33.9 33.2 32.6 31.9 29.3 16
18 33.1 32.9 32.7 32.5 32.3 32.1 31.9 31.7 31.4 31.2 31.0 30.8 30.6 30.4 30.2 29.6 29.1 28.5 27.9 27.4 18
20 28.8 28.6 28.4 28.2 28.0 27.8 27.6 27.4 27.2 27.0 26.8 26.6 26.4 26.2 26.0 25.7 25.2 24.7 24.1 20
22 25.4 25.2 25.0 24.8 24.6 24.4 24.2 24.0 23.8 23.6 23.4 23.2 23.0 22.8 22.6 22.4 22.0 21.5 22
24 22.5 22.4 22.2 22.0 21.8 21.6 21.4 21.2 21.0 20.8 20.6 20.4 20.2 20.0 19.8 19.6 19.2 24
26 20.4 20.2 20.0 19.8 19.6 19.4 19.2 19.0 18.8 18.6 18.4 18.3 18.1 17.9 17.7 17.5 17.3 26
28 18.3 18.1 18.0 17.8 17.6 17.4 17.2 17.0 16.8 16.6 16.4 16.2 16.0 15.9 15.7 15.5 28
30 16.6 16.4 16.2 16.0 15.8 15.6 15.4 15.3 15.1 14.9 14.7 14.5 14.3 14.1 13.9 30
32 15.0 14.9 14.6 14.5 14.3 14.1 13.9 13.7 13.5 13.3 13.1 13.0 12.8 12.6 32
34 13.7 13.5 13.3 13.1 12.9 12.7 12.5 12.3 12.2 12.0 11.8 11.6 11.4 34
36 12.6 12.4 12.2 12.0 11.9 11.7 11.5 11.3 11.1 10.9 10.7 10.6 10.4 36
38 11.5 11.3 11.1 10.9 10.8 10.6 10.4 10.2 10.0 9.8 9.6 9.4 38
40 10.5 10.3 10.1 9.9 9.7 9.6 9.4 9.2 9.0 8.8 8.6 40
42 9.5 9.4 9.2 9.0 8.8 8.6 8.4 8.3 8.1 7.9 42
44 8.9 8.7 8.5 8.3 8.1 8.0 7.8 7.6 7.4 7.2 44
64 3.1 2.6 64
66 2.4 66
Counter Counter
weight(t)
61.3+20 weight(t)
Parts Parts
of 13 12 12 11 10 9 8 7 7 6 6 5 5 5 4 4 4 3 3 3 3 of
line line
Unit: t
H Load Chart
10 48.9 48.5 50.1 48.5 47.0 45.6 44.2 42.8 41.6 40.4 39.3 10
12 37.9 41.0 39.4 39.2 38.4 37.2 36.2 35.2 34.3 33.3 32.5 31.6 30.8 29.9 29.2 28.3 27.3 12
14 30.7 33.3 32.0 31.7 31.5 31.4 30.5 29.7 28.9 28.1 27.5 26.8 26.0 25.4 24.7 24.0 23.4 22.7 22.1 14
16 27.9 26.7 26.5 26.3 26.1 25.9 25.6 24.9 24.2 23.7 23.0 22.4 21.9 21.3 20.7 20.1 19.6 19.1 16
18 23.9 22.8 22.6 22.4 22.2 22.0 21.9 21.7 21.1 20.6 20.0 19.6 19.0 18.5 18.1 17.5 17.0 16.5 18
20 19.8 19.6 19.5 19.2 19.0 18.8 18.6 18.4 18.1 17.7 17.2 16.7 16.2 15.8 15.3 14.8 14.4 20
22 17.2 17.0 16.8 16.6 16.4 16.2 16.1 16.0 15.7 15.2 14.7 14.4 14.0 13.5 13.1 12.7 22
24 15.1 14.9 14.7 14.5 14.3 14.2 14.0 13.8 13.6 13.1 12.8 12.4 12.0 11.6 11.2 24
26 13.3 13.1 12.9 12.7 12.5 12.4 12.2 12.0 11.8 11.4 11.0 10.6 10.3 10.0 26
28 11.9 11.7 11.5 11.3 11.1 11.0 10.8 10.6 10.5 10.3 9.9 9.5 9.1 8.8 28
30 10.5 10.4 10.2 10.0 9.9 9.7 9.5 9.2 9.1 8.8 8.5 8.2 7.9 30
32 9.3 9.2 8.9 8.8 8.6 8.5 8.3 8.1 7.9 7.6 7.2 6.9 32
34 8.3 8.1 8.0 7.8 7.6 7.3 7.2 7.0 6.8 6.5 6.2 34
36 7.5 7.3 7.2 7.0 6.8 6.6 6.5 6.3 6.1 5.7 5.4 36
38 6.6 6.5 6.3 6.1 5.9 5.8 5.5 5.3 5.0 4.8 38
FJ Configuration
13m B 3m T
5m jib top
19m B 3m 6m T
6m jib
25m B 3m 6m 6m T
31m B 3m 6m 6m 6m T
B 5m Jib base
5m 3m jib
T Jib top
5m transition boom
6m 6m Jib insert
3m 3m Jib insert
8m boom top
9m insert
6m insert
8m boom base
FJ Working Radius
100
Boom Length(m)
10°
85°
95
80°
30° 70°
90
60° 85
64m+31m
80
64m+25m
50° 75
64m+19m
70
64m+13m
64m
65
61m 40°
58m 60
55m
55
52m
28m+31m
49m
50
46m 28m+25m
43m 30° 45
28m+19m
40m
40
37m
28m+13m
34m
35
31m
28m 30
25
20
15
10
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
Radius (m)
Unit: t
FJ Load Chart
Note:
1.The rated load in the load chart is calculated complying with EN 13000;
2.The working radius is the horizontal distance from the load center to the swing center;
3.The actual lifting capacity must subtract the weight of hooks and other riggings from the rated capacity in the load chart.
4.The load value is calculated when the object is hung freely,without considering the influence of wind on the load, ground conditions and slope, operation speed and the influence of any
other negative factors over safe operation. Therefore, the operator bears the responsibility of making a judgement and decreasing the load and lowering speed.
5. All ratings are calculated when the machine is parking on firm and level ground with less than 1% gradient.
9 30.0 9
10 28.8 27.8 27.3 10
12 27.4 27.1 26.8 26.6 26.3 26.0 12
14 26.3 26.4 26.5 26.5 26.1 25.8 25.5 25.2 24.6 24.2 14
16 25.5 25.6 25.8 26.0 25.8 25.5 25.2 24.9 24.1 23.5 23.0 22.6 21.8 16
18 24.7 24.5 24.9 25.1 24.9 24.8 24.4 24.1 23.4 22.9 22.4 22.0 21.1 18
20 23.5 23.3 23.5 23.7 23.5 23.3 23.1 22.9 22.3 22.0 21.6 21.2 20.3 20
22 22.3 22.0 21.9 21.8 21.8 21.6 21.5 21.2 21.0 20.7 20.3 20.2 19.5 22
24 20.7 20.1 20.1 19.9 19.8 19.7 19.6 19.5 19.4 19.3 19.0 18.8 18.4 24
26 18.9 18.3 18.3 18.2 18.0 17.9 17.8 17.7 17.6 17.5 17.3 17.2 17.0 26
28 17.4 17.3 17.1 16.9 16.7 16.5 16.3 16.1 16.0 15.8 15.6 15.4 15.3 28
30 15.9 15.8 15.6 15.4 15.2 15.0 14.8 14.7 14.5 14.3 14.1 14.0 13.8 30
32 14.7 14.5 14.3 14.2 13.9 13.7 13.6 13.4 13.2 13.0 12.8 12.7 12.6 32
34 13.5 13.4 13.2 13.0 12.8 12.6 12.4 12.2 12.1 11.9 11.7 11.5 11.4 34
36 12.5 12.4 12.2 12.0 11.8 11.6 11.5 11.3 11.1 10.9 10.7 10.6 10.4 36
38 11.7 11.5 11.3 11.2 10.9 10.7 10.6 10.4 10.2 10.0 9.8 9.7 9.6 38
40 10.7 10.5 10.4 10.2 10.0 9.8 9.6 9.4 9.3 9.1 8.9 8.8 40
42 9.8 9.7 9.4 9.3 9.1 8.9 8.7 8.5 8.4 8.2 8.1 42
44 9.0 8.8 8.6 8.4 8.2 8.1 7.9 7.7 7.5 7.4 44
46 8.4 8.2 8.0 7.9 7.7 7.5 7.3 7.1 6.9 6.8 46
48 7.7 7.5 7.3 7.1 7.0 6.8 6.6 6.4 6.2 48
50 7.0 6.8 6.6 6.5 6.3 6.0 5.8 5.7 50
52 6.4 6.2 6.0 5.8 5.6 5.4 5.2 52
54 5.7 5.5 5.3 5.1 4.9 4.8 54
56 5.3 5.1 4.9 4.7 4.5 4.4 56
58 4.7 4.5 4.3 4.1 4.0 58
60 4.2 4.0 3.8 3.6 60
62 3.6 3.4 3.3 62
64 3.3 3.1 3.0 64
66 2.8 2.7 66
68 2.4 68
Counter Counter
weight(t) 61.3+20 weight(t)
Parts of Parts of
3 3 3 2 2 2 2 2 2 2 2 2 2
line line
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
Unit: t
FJ Load Chart
— Agent information—
Due to updated technology, the technical parameters and configurations are subject to change
without prior notice. The machine in the picture may include additional equipment. This album
is for reference only, subject to the object.
All rights reserved for Sany, without the written permission of Sany, the contents of any part of
this content shall not be copied or copied for any purpose.