Professional Documents
Culture Documents
Duty-Cycle Crane
MC Line
Technical Data
1450
410
2990 3050 4310
6040 5310
7280 1020
Operating Weight
70 0
R4 with HD undercarriage, 1,000-mm-track
shoes, upper carriage with 2 hoist winches
and wire ropes, operating equipment, 30 t
standard counterweight, 18.4 m basic boom
including A-frame, boom hoist, roller block,
hoist rope, boom bottom piece, 6 m boom
insert, boom top, guy ropes and roller head,
130 t hook block
8300
Control System
B-Drive
The B-Drive is a central operating and visualization system
– B-Drive combines adjustable potentiometer values on
one display
– Ergonomic positioning of the display on the right column
of the operator’s cab
Boom
Robust tubular lattice boom with thick walled boom tubes, – The boom is designed for use with Bauer hose drum
specifically designed for applications in specialist foundation systems
engineering where high dynamic loads occur – Boom extensions and boom head according to the
– Basic boom consists of an A-frame, hoist winch, hoist application
rope, boom butt
Operator’s Cab
– Rope roller guide system for main winches – Counterweights for various types of applications
– Tensile load measurement via redundant load measuring – Adapter on undercarriage for casing oscillator
sockets – Walkways on the upper carriage for various types of
– Winch synchronization for main winches applications
– Electronic load moment limitation for hoisting device – Access ladder to upper carriage
operation, user interface integrated in B-Tronic – Special coating available on customer request
– Different roller heads for various applications – Sun protection systems for various types of applications
– Set of ropes for different applications – Fly jib
– Hydraulic and electronic equipment kits for various – Working at height system for boom walkway (patented)
applications – On top hand rails - upper carriage
such as cutting systems, two-rope grabs, hanging – On top hand rails - counterweight
leaders, hydraulic hammers, depth vibrators and rotary – Swing angle indicator
heads – Swing angle limitation device
– Quick connection system for the crawlers with hydraulic – Boom angle limitation device
quick couplings, assembling tools and lifting gear – Rope fix point with overload protection (patented)
– Rope pull-in winch – Sound proof kit
– Hydraulic counterweight mover with hydraulic ballast – Arctic kit
lock – Additional air conditioning system
– Independent cab heater with timer – Fire extinguishing system
– Electric fuel pump for diesel tank – DTR module
– Aircraft warning light – High-pressure cleaner
– Anemometer – Rear frame for additional power packs
– Bauer GCS (data acquisition system for hydraulic grabs) – Auxiliary winch for grab operation
– Central lubrication system – Protective ventilation system
Applications
Base Machine
– for hydraulic diaphragm wall grab with hydraulic hose – for various vibratory pile drivers with power pack at the
drum system and grab turning device rear (power pack optional)
– for cased bored piles in combination with a grab and a – for Bauer cutters with various hose drum systems
casing oscillator – for Bauer Flydrill with hydraulic power supplied via the
– for Bauer depth vibrator TR 75 with hydraulic power on-board hydraulic system
supplied via the on-board hydraulic system
Opera-
Boom length (m)
ting
radius
r (m) 18.4 21.4 24.4 27.4 30.4 33.4 36.4
6.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0
7.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 51.8 53.0 53.0 50.7 53.0 53.0 49.3 53.0 53.0
8.0 45.6 53.0 44.8 53.0 43.9 52.2 53.0 42.9 51.2 53.0 41.9 50.2 53.0 40.8 49.1 53.0 39.6 47.9 51.7
9.0 38.3 45.4 37.5 44.6 36.7 43.8 47.3 35.8 42.9 46.4 34.8 41.9 45.5 33.9 41.0 44.5 32.8 39.9 43.4
10.0 32.8 39.0 32.1 38.3 31.3 37.5 40.6 30.5 36.7 39.8 29.6 35.8 38.9 28.7 34.9 38.0 27.7 33.9 37.0
11.0 28.6 34.1 27.9 33.4 27.2 32.7 35.4 26.4 31.9 34.6 25.6 31.1 33.8 24.8 30.2 33.0 23.8 29.3 32.1
12.0 25.2 30.2 24.6 29.5 23.9 28.8 31.3 23.2 28.1 30.6 22.4 27.3 29.8 21.6 26.5 29.0 20.8 25.7 28.1
13.0 22.5 27.0 21.9 26.4 21.3 25.7 27.9 20.6 25.0 27.3 19.8 24.3 26.5 19.1 23.5 25.7 18.2 22.7 24.9
14.0 20.3 24.3 19.7 23.8 19.1 23.1 25.2 18.4 22.5 24.5 17.7 21.8 23.8 16.9 21.0 23.1 16.2 20.2 22.3
15.0 18.4 22.1 17.8 21.6 17.2 21.0 22.8 16.6 20.3 22.2 15.9 19.6 21.5 15.2 18.9 20.8 14.4 18.2 20.0
16.0 16.8 20.2 16.2 19.7 15.6 19.1 20.9 15.0 18.5 20.2 14.3 17.8 19.6 13.6 17.1 18.9 12.9 16.4 18.1
17.0 14.8 18.1 14.3 17.5 19.1 13.6 16.9 18.5 13.0 16.2 17.9 12.3 15.6 17.2 11.6 14.9 16.5
18.0 13.6 16.7 13.1 16.1 17.6 12.5 15.5 17.0 11.8 14.9 16.4 11.2 14.2 15.8 10.5 13.5 15.1
19.0 12.6 15.4 12.0 14.9 16.3 11.4 14.3 15.7 10.8 13.7 15.1 10.2 13.0 14.5 9.5 12.4 13.8
20.0 11.6 14.3 11.1 13.8 15.2 10.5 13.2 14.6 9.9 12.6 14.0 9.3 12.0 13.3 8.6 11.3 12.7
21.0 10.3 12.8 14.1 9.7 12.3 13.5 9.1 11.7 13.0 8.5 11.1 12.3 7.9 10.4 11.7
22.0 9.6 12.0 13.2 9.0 11.4 12.6 8.4 10.8 12.0 7.8 10.2 11.4 7.2 9.6 10.8
23.0 8.9 11.2 12.4 8.3 10.6 11.8 7.8 10.1 11.2 7.2 9.5 10.6 6.5 8.9 10.0
Notes:
1. The specified loads are maximum values and must not be exceeded. 7. When lifting loads that exceed the maximum pulling force of a winch it
2. The rated loads are valid for a planar, firm plane. must be ensured that no single winch is overloaded.
3. The rated loads are valid for a 360° swing angle. 8. During operation with a mechanical two-rope grab, the maximum pulling
4. The rated loads are valid for maximum undercarriage track width. force of a single winch – considering the rope layer – must not be
5. The rated loads do not exceed 75 % of the tipping load. exceeded.
6. The weights of lifting accessories and ropes are part of the permissible 9. The specified values are for information purposes only. The actual values
total load. can be found in the documentation supplied with the machine.
Flying Vibro
30 t counterweight, main winch 350 kN single reeved (double strand) over masthead
Depth Vibrator TR
Opera-
Boom length (m)
ting
radius
r (m) 21.4 24.4 27.4 30.4 33.4 36.4 39.4 42.4
8.0 46.8 46.8 45.9 45.9 45.9 44.7 44.7 44.7 44.0 44.0 44.0 43.1 43.1 43.1 42.5 42.7 42.7 41.8 41.8 41.8 41.4 41.4
9.0 39.7 42.0 39.2 42.0 42.0 38.7 41.8 41.8 38.0 41.2 41.2 37.3 40.2 40.2 36.6 39.7 39.7 35.9 38.9 38.9 38.5 38.5
10.0 34.0 38.0 33.5 38.0 38.0 33.0 37.8 37.8 32.4 37.8 37.8 31.7 37.7 37.7 31.1 37.2 37.2 30.3 36.5 36.5 35.7 36.0
11.0 29.6 34.6 29.1 34.6 34.6 28.6 34.1 34.6 28.0 33.5 34.5 27.4 32.9 34.4 26.8 32.2 34.4 26.1 31.5 34.2 30.8 33.5
12.0 26.1 31.0 25.6 30.5 31.8 25.1 30.0 31.8 24.6 29.5 31.7 24.0 28.9 31.3 23.4 28.3 30.7 22.7 27.6 30.1 26.9 29.3
13.0 23.2 27.6 22.7 27.2 29.4 22.3 26.7 29.0 21.7 26.2 28.4 21.2 25.6 27.9 20.6 25.0 27.2 19.9 24.4 26.6 23.7 25.9
14.0 20.8 24.9 20.4 24.4 26.5 19.9 24.0 26.0 19.4 23.5 25.5 18.9 22.9 25.0 18.3 22.4 24.4 17.7 21.7 23.8 21.1 23.1
15.0 18.8 22.6 18.4 22.1 24.0 17.9 21.7 23.6 17.4 21.2 23.1 16.9 20.7 22.5 16.3 20.1 22.0 15.7 19.5 21.4 18.9 20.7
16.0 17.1 20.6 16.7 20.1 21.9 16.2 19.7 21.5 15.7 19.2 21.0 15.2 18.7 20.5 14.7 18.2 19.9 14.1 17.6 19.3 17.0 18.7
Notes:
1. The rated loads are valid for a planar, firm plane.
2. The rated loads are valid for a 360° swing angle.
3. The rated loads are valid for maximum undercarriage track width.
4. The rated loads do not exceed 75 % of the tipping load.
5. The weights of lifting accessories and ropes are part of the permissible total load.
6. The specified values are for information purposes only. The actual values can be found in
the documentation supplied with the machine. Dynamic Compaction (BDC)
HTS 58/48/90°
Max. cutting depth, unturned 58 m
Turned 48 m
Max. load 41 t
HTS 70/60/90°
Max. cutting depth, unturned 70 m
Turned 60 m
Max. load 34.5 t
ft m
200
60
Auxiliary Jib
56
180
52
160 8
84°
48
70°
44
140 °
60
40
°
50 2500
120 .4m
36 45
.4m The optional auxiliary
42
jib is designed for single
32 .4m
°
39
40
strand operation up to
100
.4m max. 35 t. Conditions for
36
28 .4m lifting operations apply
33 for rated loads.
.4m
°
30
80 24 30
.4m
27
.4m
20 24
60 .4m
21
20°
16 .4m
18
.4m
15°
15
40 12
.4m
12
8
20
4
0 0
48 44 40 36 32 28 24 20 16 12 8 4 0m
Boom Configurations
30 t counterweight, boom lengths from 18.4 m to 39.4 m, 300 / 350 kN winches, loads in t
Notes:
1. The rated loads are determined acc. to EN 13000. 6. The weights of lifting accessories and ropes are part of the permissible
2. The rated loads are valid for a planar, firm plane. total load.
3. The rated loads are valid for a 360° swing angle. 7. When travelling with a load, the rated load must be reduced.
4. The rated loads are valid for maximum undercarriage track width. 8. The specified values are for information purposes only. The actual values
5. Steel structures are designed acc. to EN 13001. can be found in the documentation supplied with the machine.
40 t counterweight, boom lengths from 18.4 m to 42.4 m, 300 / 350 kN winches, loads in t
Notes:
1. The rated loads are determined acc. to EN 13000. 6. The weights of lifting accessories and ropes are part of the permissible
2. The rated loads are valid for a planar, firm plane. total load.
3. The rated loads are valid for a 360° swing angle. 7. When travelling with a load, the rated load must be reduced.
4. The rated loads are valid for maximum undercarriage track width. 8. The specified values are for information purposes only. The actual values
5. Steel structures are designed acc. to EN 13001. can be found in the documentation supplied with the machine.
45 t counterweight, boom lengths from 24.4 m to 45.4 m, 300 / 350 kN winches, loads in t
Notes:
1. The rated loads are determined acc. to EN 13000. 6. The weights of lifting accessories and ropes are part of the permissible
2. The rated loads are valid for a planar, firm plane. total load.
3. The rated loads are valid for a 360° swing angle. 7. When travelling with a load, the rated load must be reduced.
4. The rated loads are valid for maximum undercarriage track width. 8. The specified values are for information purposes only. The actual values
5. Steel structures are designed acc. to EN 13001. can be found in the documentation supplied with the machine.
Base Machine
11610 3500
G = 83 t with UW 195 BC
3590
1450
1340
3620 7280 710 1000
220
7210 4400 2980
3980
3500
3040
2820
system (optional)
1400
3980 2930
11610
1340
Crawlers UW 195 BC
G = 2 x 17.1 t 7280 1300
Counterweights
1900
1900
990
990
Boom Components
1560
1560
Design developments and process improvements may require the specification and materials to be updated and changed without prior
notice or liability. Illustrations may include optional equipment and not show all possible configurations. These and the technical data are
provided as indicative information only, with any errors and misprints reserved.
905.673.2 11/2018