Professional Documents
Culture Documents
CEP Report
By
NAME Registration Number
CIIT/ - - /ATD
CIIT/ - - /ATD
CIIT/ - - /ATD
CIIT/ - - /ATD
We Name1 (CIIT/ - - /ATD), Name2 (CIIT/ - - /ATD), Name3 (CIIT/ - - /ATD) and
Name4 (CIIT/ - - /ATD) hereby declare that we have produced the work presented in
this report, during the scheduled period of study. We also declare that we have not taken
any material from any source except referred to wherever due. If a violation of rules has
occurred in this report, we shall be liable to punishable action.
Date: _________________
_________________
Name1
(CIIT/ - - /ATD)
_________________
Name2
(CIIT/ - - /ATD)
_________________
Name3
(CIIT/ - - /ATD)
_________________
Name4
(CIIT/ - - /ATD)
ii
ABSTRACT
iii
TABLE OF CONTENTS
ABSTRACT......................................................................................................................iv
DECLARATION..............................................................................................................iv
1 Introduction.................................................................................................................1
2 Literature Survey........................................................................................................1
3 Proposed Methodology...............................................................................................1
4 Simulation Results.......................................................................................................2
LIST OF FIGURES
iv
LIST OF ABBREVIATIONS
IC Integrated Circuit
PWM Pulse Width Modulation
…
...
v
1 Introduction
Write a detailed introduction of your project here…
1.1Objectives
Aims and objectives of your project…
2 Literature Survey
2.1 Abc…
2.2 Abc…
3 Proposed Methodology
3.1 Mathematical Model
3.2 System Design / Block diagram
1
3.3 Simulation/hardware model (if any)
3.4 Circuit diagram / components / simulation diagram (if any)
4 Simulation Results
4.1 Hardware/software simulation results
Figures should be properly numbered and with proper captions
2
5 Conclusions
Write a brief conclusion of your project
References
Should be in standard IEEE format…
Appendix
Write simulation code etc…
Teachers should assess CLO2, CLO3 and CLO4 based on the given rubrics
(overall weightage 20%)
CLO3 (Referencing/Citations) 5%
(Turnitin report should be
generated.)
CLO4 (Communication) 5%