Professional Documents
Culture Documents
FEATURES
• Temperature coefficient of resistance (TCR):
- 55 °C to + 125 °C, 25 °C ref.
- RCK0X series: ± 2 ppm/°C typical (see table 1)
• Power rating: to 1 W at + 125 °C
• Resistance tolerance: to ± 0.005 % (50 ppm)
• Load life stability: ± 0.005 % at 70 °C, 2000 h at
rated power
• Resistance range: 0.5 Ω to 1 MΩ (for higher or lower
values, please contact Application Engineering)
INTRODUCTION • Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
Bulk Metal® Foil (BMF) technology outperforms all other cost or delivery (e.g. 1K2345 vs. 1K)
resistor technologies available today for applications that • Electrostatic discharge (ESD) at least to 25 kV
require high precision and high stability. • Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
This technology has been pioneered and developed by • Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)
Vishay Foil Resistors (VFR), and products based on this • Thermal EMF: 0.05 µV/°C
technology are the most suitable for a wide range of • Voltage coefficient: < 0.1 ppm/V
applications. BMF technology allows the production of • Low inductance: < 0.08 µH
customer-oriented products, designed to satisfy specific • Non hot-spot design
challenging technical requirements. • Terminal finishes available: lead (Pb)-free, tin/lead alloy
• Matched sets are available on request
The RCK series of BMF resistors offers low TCR, excellent (TCR tracking: to 0.5 ppm/°C)
load life stability, tight tolerance, fast response time, low • Prototype quantities available in just 5 working days
current noise, low thermal EMF and low voltage coefficient, or sooner. For more information, please contact
foil@vishaypg.com
all in one resistor.
• For better TCR performances please review the
The RCK series is virtually insensitive to destabillizing datasheets for the Z Series and Z203
factors. The resistor element is a solid alloy that displays the
desirable bulk properties of its parent material, thus it is FIGURE 1 - TYPICAL RESISTANCE CHANGE
inherently stable and noise free. The standard design of VERSUS TEMPERATURE CURVES AND
these resistors provides a unique combination of CHORD SLOPES (TCR) OF TWO ALLOYS
characteristics found in no other single resistor. IN MILITARY RANGE
VFR's application engineering department is available to
+ 150
advise and to make recommendations. For non-standard
technical requirements and special applications, please + 100
contact foil@vishaypg.com. + 50
ΔR
R 0
(ppm)
TABLE 1 - RESISTANCE VERSUS TCR - 50
Notes
(1) For RCK02, L.S. = 5.08 mm (0.200 " inches).
200 %
Double Rated Power
175 %
150 %
Interloop Capacitance Current Path
Reduction in Series Before Trimming
125 %
Rated Power
100 % Current Path
After Trimming
Mutual Inductance
75 % Reduction due Trimming Process
to Change in Removes this Material
50 % Current Direction from Shorting Strip Area
Changing Current Path
and Increasing
25 % Resistance
0%
- 75 - 50 - 25 0 25 50 75 100 125 150 175 200
Ambient Temperature (°C) Note: Foil shown in black, etched spaces in white
-20
-40
-60
-80
-100
-120
0 5 10 15 20 25 30
Time (Years)
Load life at 2000 h ± 0.015 % (150 ppm) Maximum ΔR at 0.3 W/+ 125 °C
Thermal Electromotive Force (EMF) (4) 0.1 µV/°C Maximum; 0.05 µV/°C typical
1 µV/W (Model RCK02)
Notes
Load life ΔR maximum can be reduced by 80 %, please contact applications engineering department.
(1)
(2)
Inductance (L) due mainly to the leads.
(3)
The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)
(4)
µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.
Y 0 7 9 3 8 0 K 5 0 0 0 V 9 L
RCK02 T 80K500 V B
Note
(1) For non-standard requests, please contact application engineering.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.