Professional Documents
Culture Documents
Product Information
CAN Bus Transceiver – CF160
PIN configuration
Customer benefits:
Excellent system know-how
Smart concepts for system safety
Secured supply
Long- term availability of manufacturing processes
and products
QS9000 and ISO/TS16949 certified
Pin description
Features
The CF160 is based on ISO/DIS 11898
Pin Name Description
Transmitter
1 TXO Transmitter input
- Generation of differential output signals 2 B Ground
- Overtemperature-shutdown 3 A Supply voltage
- Slope control to reduce RFI and EMI
4 RXO Receive output
- RES-Input to switch off transmitter in case of
5 RES Reset input (active low)
error
Receiver 6 C_L Low side bus output
7 C_H High side bus output
- Differential input with high interference
8 NC Not connected
suppression
- Common mode input voltage range (VCOM) from
5 V to 12 V
Package: SOIC 8
1
Block Diagram
Maximum ratings
All voltages, except bus voltage, are defined with respect to pin B. Positive currents flow into the IC.
2
Characteristics
All voltages, except bus voltage, are defined with respect to pin B. Positive currents flow into the IC.
General conditions:
40°C < TOP < 125°C ; 4.5 V < VA < 5.5 V
Comment:
Dominant: VTXO = VB ; Recessive: VTXO = VA
Transmitter section
Receiver section
VDiff > 1V
IRXO = 1mA
RXO Low level output voltage VRXO 0.5 V
-2V < VC_H< 7V
-2V < VC_L< 7V
-2V < VC_H < 7V
Input signal threshold VS= VC_H-VC_L 0.1VA 0.18VA
-2V < VC_L < 7V
VHYS=VDiff.high –
Differential input hysteresis VHYS 200 mV
VDIFF.low
3
Dynamic characteristics
General conditions:
CA: 47 pF between C_H and C_L, VA= 5V, tR < 5ns
CRXO: 20 pF between RXO and B, RA: 60 Ω between C_H and C_L
Functional description
The CF160 is used as an interface between a CAN controller and the physical bus. The device provides transmitting
capability to the CAN controller.
4
Package: SOIC 8 - Narrow
Contact
© 02/2006 All rights reserved by Robert Bosch GmbH including the right to file industrial property rights
Robert Bosch GmbH retains the sole powers of distribution, such as reproduction, copying and distribution.
For any use of products outside the released application, specified environments or installation conditions no warranty shall apply and
Bosch shall not be liable for such products or any damage caused by such products.