Professional Documents
Culture Documents
Result Levelling and Contour
Result Levelling and Contour
RESULT
LEVELLING
BS IS FS RISE FALL HOC RL Correction Adjusted REMARK
RL
RAW SKETCH
1.425
Setup 2
BMA
1.219 Cp2
1.411 2.165
1.631
1.352 1.233
2.015 Setup 4
1.893 1.557
1.529 Cp1
Setup 3
SETUP 1
1.147
CP 3
Calculation
ANALYSIS
* Based from the result, a raw sketch can be created with different level from each setup.
* The result also show the final calculation of rise, fall, HOC stand for height of collimation.
correction, and adjusted reduce level from each setup.
*From all of the setup in result, the highest level for back sight was 1.631, for intermediate
sight was 2.165 and for foresight was 1.893.
* In order to find the rise and fall value, use the formula which is BS-IS/IS-IS/IS-FS. the
highest rise was 0.782 and highest fall was 0.590.
* in order to find correction, The formula to calculate the correction is loop x misclosure
Total loop
and use answer from the formula to subtract with RL. The highest adjusted RL that been
recorded in data is 13.360.
* every step in acquiring correction, rise, fall, and HOC repeated in order to not make any
mistake in any area.
RESULT
CONTOURING
RAW SKETCH
D (63.914 F (74.9000)
E (67.734)
EXAMPLE
CALCULATION
LINE AB
B-A = 64.143-60.154
=3.989
D =10(61.000-60.154)
3.989
=2.120 m
ANALYSIS
* From the result, a raw sketch can draw with different contour and 9 grid point with different
contour.
* The result show the distance for contour that been calculate from 1 grid point to another point.
* The different contour level between point make a calculate became more troublesome because it
need to calculate the distance every 1m. The bigger the different for contour between 2 point, the
more troublesome it will become.
* For example, the distance for contour for line EH, FI and EF which need to calculate for 7 time
because it need to calculate each 1.0 contour.
* When the calculation is done for 1 line, calculate other line until finish using same formula.