This document provides calculations for the ballast coefficient of a ship with a beam of 2 meters, density of 1.79 kg/cm3, and pilot area of 1.13 m2. It lists the draft in meters, cumulative mass density in kg/cm3 and kN/m3, and cumulative mass in kN/m at increasing draft levels from 1 to 20 meters.
This document provides calculations for the ballast coefficient of a ship with a beam of 2 meters, density of 1.79 kg/cm3, and pilot area of 1.13 m2. It lists the draft in meters, cumulative mass density in kg/cm3 and kN/m3, and cumulative mass in kN/m at increasing draft levels from 1 to 20 meters.
This document provides calculations for the ballast coefficient of a ship with a beam of 2 meters, density of 1.79 kg/cm3, and pilot area of 1.13 m2. It lists the draft in meters, cumulative mass density in kg/cm3 and kN/m3, and cumulative mass in kN/m at increasing draft levels from 1 to 20 meters.
Example 5: For The Following Cross Section Of Dam With Shown Slip Surface And The Data Tabulated Below, Compute The Factor Of Safety Against Sliding. Γ Is 20 Kn/M3, Φ Is 35O And C Is 10 Kpa