Professional Documents
Culture Documents
Coating CBT Questions
Coating CBT Questions
1. Formula of WFT
Ans:
3. SSPC VIS-1
Ans:
4. SSPC VIS-2
Ans:
5. SSPC VIS-3
Ans:
6. SSPC VIS-4
Ans:
7. DFT average spot reading for area greater than 10 squqre meters the reading can be less than
the specified minimum DFT range? (True/False)
Ans:
8. SSPC SP-13
Ans:
16. Top coat can be checked for holiday test, adhesion test and DFT?
Ans:
17. For immersion tank coating prior to start service it should be check for?
Ans:
20. VS calculation
Ans:
30. Airless spray machine mix paint and air together then sxits the fluid? (True/False)
Ans:
37. For curing some coating required oil, moisture, thinner or acid?
Ans:
39. Coating apply over mill scale the film will appear weathered, stained?
Ans:
44. Which test we will do for adhesion of FBE coating on field girth weld?
Ans:
50. Coating shall not start if the dew point temprature is 3*C above the surface temprature.
(True/False)
Ans:
53. For FBE coating, holiday depends on? Film thickness, Design, Service temprature, all
Ans:
54. During Potassium Ferrocyanide test, Soluble salts color change to?
Ans:
55. Maximum allowed chloride content in abrasive?
Ans:
56. Guide to maintenance repainting with oil based and alkyd painting system?
Ans:
57. In commercial blast cleaning allowed stains? 33%, 65%, 95%, 51%
Ans:
59. When surface contamination in steel like salt spray, dust & other debris are present which fault
will ocure?Adhesion failure, Adhesive failure, Cohesive failure or all
Ans:
60. While using airless pump 2 hoses came 1st brings air 2nd brings paint and go out through gun?
(True/False)
Ans:
61. Corrosion starts when: Anode cathode electrolyte & mettalic pathway, Anode cathode
electrolyte & chloride salts present or Both
Ans:
62. Dew point is the temprature at which? Water freezes, humidity decreases, Condensation occurs
or the air saturated
Ans:
63. Profile depends on the abrasive size, hardness, density & shape. (True/False)
Ans:
64. New DFT Gauge shall be calibrated by? Manufacturer, Third party, coating inspector or all
Ans:
66. In centrifugal blasting machine what type of abrasive used? Garnet, Metallic grit & shot or
minerals
Ans:
69. Potassium Ferro Cyanide after the test turns the test paper in what color?
Ans:
70. 500 microns DFT you will check with which holiday test?
Ans:
72. What voltage is used during holiday test for FBE coating?
Ans:
83. What is the chlorine content between the underlying substrate and the coating?
Ans:
88. During the coating activity what will the coating inspector verify?
Ans: