Professional Documents
Culture Documents
Hatches Version 2
Hatches Version 2
Hatches
Multiplex electrical system Version 2
Hatches
The function senses if the engine hatch and/or the baggage hatches are open. If a hatch
is open, a warning is generated on BIC. If the parking brake is released, an acoustic
alarm sounds from BIC instead of the warning. For further information, please refer to:
• “Conditions” page 2
• “Function” page 2
• “Functional diagram” page 3
• “Signal description” page 4
• “Checking measurements” page 4
20 011931
ENG14843 English
Printed in Sweden
Volvo Bus Corporation Date Group No. Release Page
Service Bulletin 5.04 83 11 01 2(4)
Hatches
Purpose
The function senses if the engine hatch and/or the
baggage hatches are open. If a hatch is open, a warning
is generated on BIC. If the parking brake is released, an
acoustic alarm sounds from BIC instead of the warning.
Conditions
• Main power on (+30)
• Ignition on (+15)
Function
The following control units are involved:
Functional diagram
T8010280
Component list
Component number Component Component name
A03 Control unit Control unit
A90 Control unit Control unit
BB1:5 Connector Body connector
BB6:5 Connector Body connector
F5 Fuse Fuse
F21 Fuse Fuse
F34 Fuse Fuse
Volvo Bus Corporation Date Group No. Release Page
Service Bulletin 5.04 83 11 01 4(4)
Signal description
• “Hard-wired signals” page 4
• “Information link SAE J1587/1708” page 4
• “D-bus” page 4
Hard-wired signals
Name Input/output Signal type on ECU Signal description
signal
Engine hatch IN LDI Message that engine hatch is open, sent from body,
sensor to the BBM.
Baggage hatch IN LDI Message that baggage hatch(es) is(are) open, sent
sensor from body, to the BBM.
Ignition key IN HDI Warning for open hatch is only active when the ignition
is on. Sent from switch to BBM.
D-bus
Message Signal description
Baggage hatch open Baggage hatch open. Sent from body to BBM.
Engine hatch open Engine hatch open. Sent from body to BBM.
Checking measurements
Measurements Measurement method Meas- Key Expected Other
urement position value
points
Signal, body B30 — II U≈0V Hatch closed
connector block Ground
U ≈ Ubat Hatch open