Professional Documents
Culture Documents
This service manual shows you how the switching of the starting aid and deactivation of the lift axle functions
for Schmitz Cargobull vehicles (3 axle reefer and curtainsiders) fitted with the Wabco EBS E version and Knorr
EBS G2.
All technical details, descriptions and figures are valid at the time of going to press of this document or any of
its supplements.
We reserve the right to make changes for continuing development.
No claims can be made based on the details contained within this document.
Caution!
Wear appropriate safety/work clothing!
Caution!
Wear ear defenders!
Caution!
Wear a face guard!
Caution!
Wear appropriate safety gloves!
Warning!
There is a risk of damage or destruction
Service guide: Starting aid & axle lift Wabco EBS E and Knorr EBS G2
The following instructions are to be considered as a continuous description.
They provide information which is as comprehensive as possible.
The starting aid as well as the axle lift deactivator are switched by a positive signal in the Wabco EBS E
Version and Knorr EBS G2 units. This can be triggered in the tractor either by a pushbutton (factory
recommendation) or using a switch. The Schmitz Cargobull 3 axle reefer and curtainsider semitrailers with
Wabco EBS E Version and Knorr EBS G2 are equipped as standard for switching from the tractor.
As functioning is controlled via the EBS electronics, it is necessary that the ignition current or current feed is
provided via the ISO 7638 socket.