Professional Documents
Culture Documents
02-May-23
CLIENT INFORMATION
NAME
Feroz shaikh
CNIC
45504-1152680-1
ADDRESS
New malpur lane no 6 pendora, House # PD-446-A Rawalpindi.
Mailing ADDRESS
New malpur lane no 6 pendora, House # PD-446-A Rawalpindi.
CELL PHONE # &
EMAIL +92 331 5994914 EMAIL OF CLIENT
METER NUMBER
S-P 4519423 BILL TARIFF A-1a(01) FEEDER NAME Queens Road.
SANCTION LOAD
5 REQUIRED LOAD 7.5
RESIDENTIAL CONSUPTION OF CLIENT kWh PRODUCTION FROM SOLAR SYSTEM NET CONSUMPTION OF CLIENT
NET
CONSUMPTION 17,654 31,400 -13,746
INSTALLER INFORMATION
COMPANY NAME
Hadron Solar (Pvt) Ltd
COMPANY
ADDRESS 326-Johar Avenue New Campus Road Lahore
AEDB
REGISTRATION
NUMBER CR/20/041/ARE-V1
INSTALLING
ENGINEER
Momen Mujtaba
INSTALLER NAME
INSTALLER
Hadron Solar (Pvt) Ltd CNIC 35202-4074154-3
INSTALLER PHONE
# & EMAIL 0315-4182493 ahmed.shahbaz@hadronsolar.com
SYSTEM INFORMATION
Second set of Make Model # of panels Watts/ panel KW of 2nd Set of Panels
solar panels
0.000
Second set of Make Model Rated Capacity Inverter Serial Number
Inverters
SIZE
OVERALL SYSTEM
Application Form For NM -
V45
Prepared by Engr. Mubashir Bashier 9900
WhatsApp : +923045313414
List of Net Metering Documents
1 1) Distributed Generation Interconnection Agreement between Distributed Generator and 2-7
Distribution Company (Schedule-I). *1
*1
1 2) Inspection of Electrical/DG Installations as per AEDB Regulations 8
*1 9-10
1 3) Schematic drawings, Single line diagram of the system. (Schedule-VIII)
*1 11
1 4) Site plan showing location of external disconnect switch
1 5) Standard Distributed Generation Application Form For Distribution Company (Schedule-II)*2 . 12-14
*2
1 7) Application for Exemption from section 24 of the Act (Schedule-IV) 16
*2
1 8) Fee Schedule (Schedule-V). 17
1 11) Schedule 7 AEDB. (First page on judicial paper, Page 2-4 on A3 legal) rest of pages on A4 20-29
*3
*3
2 12) Quotation by DG installer accepted by the Consumer (letter Head)
3 13) Load Flow Study if DG Facility is greater than 250 KW. (On PSSE Or FDRANA Up to 30
499kW & On only PSSE Above 499 kW )**
4 14) Inspection Certificate Issued by Provisional Electrical Inspector if DG System is above 250 31
kW**
5 15) Copy of attested CNIC if signing on behalf of an organization, then add authority letter
on
non judicial paper
6 16) Copy of last paid electricity bill. (DG and Electric Bill Name should be same).*
02-05-23
Azhar 12 14313 2432601
1. Interconnection Agreement between DG <->
Schedule-I
[See Regulation 2 (1) (b)]
Distributed Generation Interconnection Agreement (1 kW to 1 MW) between
Distributed Generator and Distribution Company
The Distributed Generation Interconnection Agreement (the “Agreement”), is made and entered
in to this 22-Jul-22 by and between Islamabad Electric Supply Company IESCO )
_(
hereinafter called “DISCO” and Azhar Masih hereinafter called the “Applicant”.
Applicant shall be 3 phase 400 V or 11 kV DISCO’s consumer. DISCO and the Applicant are
hereinafter collectively referred to as the “Parties” and individually as a “Party”.
Recitals
2 of
29-Jul-
Azhar 12 14313 2432601
1. Interconnection Agreement between DG <->
Agreement
NOW THEREFORE, in consideration of the foregoing Recitals and for good and valuable
consideration, the DISCO and Applicant agree as follows:
1. Design Requirement
The DG Facility shall be installed in compliance with NEPRA (Alternative & Renewable Energy)
Distributed Generation/ Net Metering Regulations 2015
2. Applicant’s Representations and Warranties
The DISCO may require that the Applicant furnish and install an interconnection disconnect
switch that opens, with a visual break, all underground poles of the interconnection circuit. The
interconnection disconnect switch shall be rated for the voltage and fault current requirements
of the DG Facility, and shall meet all the applicable IEC, IEEE Standards, as well as applicable
requirements of the NEPRA Grid Code. The switch enclosure shall be properly grounded. The
interconnection disconnect switch shall be accessible at all times, located for ease o access of
DISCO personnel, and shall be capable of being locked in the open position. The Applicant shall
follow the DISCO’s recommended switching, clearance, tagging and locking procedures.
4. Modifications to the DG Facility
Applicant shall notify DISCO of plans for any material modification to the DG Facility by
providing at least forty working days of advance notice. “Material Modification” is defined as
any modification that changes the maximum electrical output of the DG Facility or changes the
interconnection equipment. The notification shall consists of a completed, revised Application
and such supporting materials as may be reasonably requested by DISCO. Applicant agrees not
3 of
29-Jul-
Azhar
1. Interconnection Agreement between DG <->
to commence installation of any material modification to the DG Facility until DISCO has
approved the revised Application.
5.1 Distributed Generator shall obtain and maintain appropriate insurance for third party
personal injury and general commercial liability.
5.2 Each party as indeminitor shall defend, hold harmless, and indemnify the other party
and the directors, officers, employees, and agents of the other party against and from
any and all loss, liability, damage, claim, cost, charge, demand, or expense (including any
direct, indirect or consequential loss, liability, damage, claim, cost, charge, demand, or
expense, including attorney’s fees) for injury or death to persons, including employees
of either party, and damage to property, including property of either party, arising out
of or in connection with (a) the engineering, design, construction, maintenance, repair,
operation, supervision, inspection, testing, protection or ownership of the indeminitor’s
facilities, or (b) the making of replacements, additions, betterments to, or reconstruction
of the indeminitor’s facilities. This indemnity shall apply notwithstanding the active or
passive negligence of the indemnitee. However, neither party shall be indemnified
hereunder for its loss, liability, damage, claim, cost, charge, demand, or expense
resulting from its sole negligence or willful misconduct.
5.3 The indeminitor shall, on the other party’s request, defend any suit asserting a claim
covered by this indemnity and shall pay for all costs, including reasonable attorney fees
that may be incurred by the other party in enforcing this indemnity.
5.4 The provisions of this Section shall not be construed to relieve any insurer of its
obligations to pay any insurance claims in accordance with the provisions of any valid
insurance policy.
5.5 Except as otherwise provided in this section, neither party shall be liable to the other
party for consequential or remote damages incurred by that party.
Applicant shall notify DISCO in writing that installation of DG Facility is complete and that the
interconnection equipment is available for testing by DISCO at least fifteen working days duly
certified by Electrical Inspector before Applicant interconnects the DG Facility with DSICO’s
Distribution System. DISCO shall thereupon have the right to test the DG Facility. DISCO shall
also have the right to witness any testing by Applicant of the DG Facility. Any DISCO testing of
the DG Facility shall be completed within ten working days. After the testing which is to the
satisfaction of both parties, the DG facility may be interconnected with the distribution system
of DISCO to be witnessed by representatives of both parties within thirty eight days.
4 of
29-Jul-
Azhar 12 14313 2432601
7. Access to DG Facility
Applicant shall permit DISCO’s employees and agents to enter the property on which the DG
Facility is located at any reasonable time for the purposes of inspecting and/or testing
Applicant’s DG Facility to ensure its continued safe and satisfactory operation and the accuracy
of DISCO meters. Such inspections shall not relieve Applicant from its obligation to maintain the
DG Facility and any related equipment owned by Applicant in safe and satisfactory operating
conditions.
DISCO shall have the right to witness any testing by Applicant of the DG Facility.
DISCO may limit the operation and/or disconnect or require the disconnection of a DG Facility
from DISCO’s Distribution System at any time, with or without notice, in the event of fault.
DISCO may also limit the operation and/or disconnect or require the disconnection of DG
Facility from DISCO’s Distribution System upon the provision of thirty days written notice for the
conditions to allow for routine maintenance, repairs or modifications to DISCO’s Distribution
System.
Nothing in this Agreement prevents Applicant from filing a petition with the Authority to appeal
any requirement imposed by DISCO as a condition to interconnection of DG Facility that
applicant alleges is unreasonable. In case of a dispute, the decision of the Authority shall be
final and binding on both the parties.
5 of
29-Jul-
Azhar 12 14313 2432601
The term of Agreement between Distributed Generator and DISCO shall be three years with
effect from the date of commissioning of DG facility. At the expiry of initial term, the Agreement
may be automatically renewed by the mutual understanding between Distributed Generator
and DISCO for another term of three years and so on.
a. DISCO may limit the operation and/or disconnect or require the disconnection of a DG
Facility from DISCO’s Distribution System at any time, with or without notice, in the
event of fault. DISCO may also limit the operation and/or disconnect or require the
disconnection of DG Facility from DISCO’s Distribution System upon the provision of
thirty days written notice for the conditions which including as follows:
- To allow for routine maintenance, repairs or modifications to DISCO’s Distribution
System
- Upon DISCO’s determination that DG Facility is not in compliance with these Rules
- Upon termination of the Agreement
b. This Agreement may be terminated in accordance with these Regulations
c. The Distributed Generator may terminate the Agreement upon thirty days written
notice if the Distributed Generator determines to discontinue the sale of electricity to
the DISCO
d. The DISCO shall not terminate the Agreement in any event without prior approval of the
Authority
e. All rights and obligations accrued up to termination shall continue in force upon
termination
a. Assignment by Applicant: Applicant shall not assign its rights and obligations under this
Agreement in whole or in part without the prior written consent of DISCO, which
consent shall not be unreasonably withheld or unduly delayed. DISCO may withhold its
consent to any proposed assignment if the proposed assignee fails to assume the
obligations of Applicant under this Agreement in writing.
b. Assignment by DISCO: The DISCO shall have the right to assign this agreement in whole
upon written notification to the Applicant.
c. Successors: This Agreement shall be binding upon the personal representatives, heirs,
successors and permitted assignees of the respective Parties.
6 of
29-Jul-
Azhar 12 14313 2432601
IN WITNESS WHEREOF, Applicant and DISCO have executed this Agreement as of the year and
date first set forth above.
Applicant Signature & Date DISCO’s Signature with Seal & Date
Sign->
02-May-23
Title Title
Feroz Shaikh
JunaidQazi Witness No. 1 (Name, CNIC & Signature) Witness No. 1 DISCO (Name, CNIC & Signature)
Witness
Sign->
CNIC: Name CNIC
Witness No. 2 (Name, CNIC & Signature) Witness No. 2 DISCO (Name, CNIC & Signature)
Witness
Sign->
CNIC:
Name CNIC
7 of
Azhar 12 14313 2432601
Date: 02-May-23
Sr. No
Name of the Applicant/Consumer: Fe roz Shaikh
Address: U p p e r q u e e n s r o a d , House # C443/10-B Sukkur.
DISCO’s Sub-Division: 2
Inspection of Electrical Installations for Commissioning/Energization for Interconnection of D.G.
Facility with the Distribution system of DISCO for Net-Metering
Hadron Solar (Pvt) Ltd ( Installer) hereby certifies that the electrical
installation work at the premises and for the Applicant/Consumer stated above has been carried out by
Momen Mujtaba
(Installer) in full conformity of standards as per NEPRA (Alternative &
Renewable Energy) Distributed Generation and Net Metering Regulations, 2015. AEDB ( CR/20/041/ARE-V1 )
Regulations, 2015 And AEDB Guidelines for consumers and installers. The Particulars of the installation test results
obtained by Momen Mujtaba (Installer) are given below.
II. 10 KW of
✔ On-Grid / Hybrid Inverter, Make: Solis Model No: S5-GR3P20K
Sign.
Name._Momen Mujtaba
29-Jul-22
Stamp:
Azhar 12 14313 2432601
29-Jul-
22
Azhar 12 14313 2432601
3) Schematic drawings, Single line diagram of the system. (Schedule-VIII)
1 2 3 4 5 6
Panel Make Utility Reference Number 12 14313 2432601 U
JA CS6W-
Panel Model Meter Number S-P 4519423
545MM
# of Panels / String
19,18 Sanction Load 2
A # of Strings 1 Required Load 6 A
Voc / Panel 49.45
Voc / String 940440.1
Guage of DC Wire 4 mm
ft Consumer Load
Length of DC Wire 20
B M ain Distribution Box B
Rooftop DC Combiner Box
Installed Yes ✔ No
Method of Combiner
IP Rating
AC Solar Breaker
Poles C63
Amp M
Main Home Supply
Guage of Wire
an Ca DISCO
Pakist
Date
29-Jul-22
1 2 5 6
9 of 31
Azhar 12 14313 2432601
1 2 3 4 5 6
Panel Make Utility Reference Number 12 14313 2432601 U
JA CS6W-
Panel Model Meter Number S-P 4519423
545MM
# of Panels / String
19,18 Sanction Load 2
✔ # of poles
Combiner Box Y Delta
Method of Combiner Generator CB Amp
Poles Make
IP Rating Amps Type
Voltage
AC Breaker
Poles C63
Amp M
Guage of Wire
tan Ca Main Home Supply DISCO
Pakis
Date 29-Jul-22
1 2 5 6
3b) Schematic drawings, Single line diagram of the system. (Schedule- Azhar Masih 12 14313 2432601 U
VIII)
1 2 3 4 5 12 1431362432601 U
2
Building height is above 15M
A Frame 6
✔ Yes No
Panels A
Lightning Arrester
✔
buildings above 15 meter
Yes No
B
B
C
C
Ohm - Ground
Ohm- Ground
2.2
Ground Rod length
Ground Rod length
5 Ft Name of Company Hadron Solar (Pvt) Ltd
D AEDB License # CR/20/041/ARE-V1 D
Client Name Azhar Masih
New malpur lane no 6 pendora,
Client Address
House # PD-446-A Rawalpindi.
1 2
10 of
Date 29-Jul-22
10 of
) Site plan showing location of external disconnect switch. Azhar Masih 12 14313 2432601 U
1 2 3 4 5 6
12 14313 2432601 U
S-P 4519423
2
A 6 A
B B
C C
1 2 5 29-Jul-22
Date
6
11 of
12) Site plan showing location of external disconnect
Azhar 12 14313 2432601
Schedule-II
[See Regulation 3(1)]
Standard Distributed Generation Application Form for Distribution Company
Distributed by Approved by
Name & Address of DISCO
Applicant’s
Sukkur LastSupply
Electric Name Company First Name
Feroz Shaikh National Electric Power Regulatory Authority (NEPRA)
CNIC of Applicant/CUIN in case of Company (copy to be attached)
45504-1152680-1
Applicant’s
Contact Mailing Address
Information—The applicant is the person that is legally responsible for the generation system
Upper queens road, House # C-443/10-B Sukkur.
Address of
Location at Generation
which DG facility
System is located
Upper queens road, House # C-443/10-B Sukkur.
12 of
29-Jul-
Azhar 12 14313 2432601
Generator/Invertor Information
Manufacturer Model No
Growatt S5-GR3P20K
Version No. Serial No.
1805080223160073
Generation Type (Check one) Generation Type (Check one)
✔ 10 kW _ _kVA volts
Primary Energy Source
2 4
Note:- If there is more than one inverters, attach an additional sheet describing each
13 of
29-Jul-
Azhar 12 14313 2432601
Site Plan Showing Location of the External Disconnect Switch (attach additional sheets as needed)
Design Requirements
(a) Has the proposed distributed generation paralleling equipment been certified by
Electrical inspector? ✔ Y N
14 of 31
29-Jul-
Azhar 12 14313 2432601
6) Application for grant of License (NEPRA)
Schedule-III
[See Regulation 4(2)]
APPLICATION FOR GRANT OF LICENSE
NATIONAL ELECTRIC POWER REGULATORY AUTHORITY (NEPRA)
1.Name of Applicant: Feroz Shaikh
1.(a)CNIC of
Applicant/CUIN in case 45504-1152680-1
of Company (Copy to
be attached)
Upper queens road, House # C-443/10-B Sukkur.
1.(b) Address:
Office
+92 331 5994914
1.(c) Contact Nos:
Ce +92 331 5994914
1.(d) Email Address:
Upper queens road, House # C-443/10-B Sukkur.
2.Location of DG facility:
4.Size of
DG facility: 9900 KW (STC)
5.Approximate monthly
energy proposed to be
supplied to DISCO
1,146 KW
(kWh):
6.Fee to be
deposited: (Non- 20,165
Refundable)
Applicant’s Signature
Sign->
Date
02-May-23
15 of
29-Jul-
Azhar 12 14313 2432601
7. Exemption from section 24 of the Act
Schedule -IV
[See Regulation 4(2) (b)]
Generation/Net Metering Regulations 2015 hereby request the Authority for grant of exemption
from the requirement of being registered as a company under the Companies Ordinance, 1984
Sign->
16 of
29-Jul-
Azhar 12 14313 2432601
8) Fee Schedule
Schedule -V
[See Regulation 4(2) (c)]
Fee Schedule
A Distributed Generator shall be bound to pay the onetime fee through pay order in favor of
National Electric Power Regulatory Authority (NEPRA) as per following fee schedule;
Important Note:
Attach a scanned copy of the deposit slip/online transaction record to this application. In the
'Deposit / Transfer reference' section of the deposit slip/online transaction, Client's Utility
Reference Number must be mentioned, without Reference Number Net-Metering Application
should not be entertained.
17 of
29-Jul-
Azhar 12 14313 2432601
9)Affidavit (On judicial paper) (Schedule-VI). [ Original be also submitted to concerned office]
Schedule -VI
[See Regulation 4(2) (d)]
License Template and agree to abide by its Terms and Conditions and the contents of the
Application are true and correct to the best of my knowledge and belief and nothing has been
concealed thereof.
Deponent
Sign->
Name: Feroz Shaikh
CNIC No: 45504-1152680-1
Date: 0 2-May-23
18 of
29-Jul-
Azhar 12 14313 2432601
10 Generation License
Schedule -VII
[See Regulation 4 (3)]
Generation License Template
1. NEPRA hereby grants Generation License to Feroz shaikh under Regulation 4 of the
NEPRA (Alternative & Renewable) Distributed Generation/Net Metering Regulation 2015 for a
period of Years. This License is valid up to 20 2
7
2. The Licensee shall abide by the provisions under NEPRA (Alternative & Renewable)
Distributed Generation/Net Metering Regulation 2015 during the currency of the License.
3. The technical parameters of the net metering arrangement are shown hereunder;
NEPRA Authority
<-Sign
Feroz Shaikh
Upper queens road, House # C-
443/10-B Sukkur.
02-May-23
19 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule 7
1 PV Modules JA CS6W-545MM
3 DC cables
Silk Cables 4mm
4 AC cables
Pakistan Cables 4mm
6 Earthing
Fast cables
2.5 mm
7 AC breakers , fuse links
63 amp C63
9 AC surge protectors
40 K T2
10 DC surge protectors
12 Bus bar
13 Manual disconnect
14 Any other
accessories/attachments
20 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule 7
Quotation by DG installer (on company letter head and bearing company stamp) and bearing acceptance
signatures, name, date and CNIC Number of the customers – (to be uploaded in portal)
21 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule 7
Payment Schedule
Milestone % Amount
<-Sign
22 of 31
29-Jul-22
Azhar 12 14313 2432601
11 AEDB: Schedule
*In case the system does not yield promised yield, installer promises to rectify till guaranteed yield is
delivered
I acknowledge that the following information has been shared with me for information and record
purposes.
Feroz Shaikh
Name of signer / on behalf of Address
Upper queens road, House # C-443/10-B
Self Sukkur.
Consumer
DG installer Stamp:
Date. 02-May-23
23 of 31
29-Jul-22
Azhar 12 14313 2432601
11 AEDB: Schedule
Certificate by Installer about compliance to standards as specified by AEDB and Regulations (SRO
S.R.O 812 ( 1 )/2015 dated 1st September 2015) and as amended time to time.
1) Compliance to quality, safety and environmental standards and technical requirements as stated in
Guidelines issued by AEDB
The design of the DG facility and its sizing complies with minimum technical
requirements and specifications as provided in the guidelines issued by AEDB
a.
The components of the DG Facility as supplied to customer complies with the quality,
safety and environment standards as specified by AEDB
b.
The warranties given to the customer for components of DG Facility complies with the
requirements as specified by AEDB
c.
The installation of the DG Facility complies with the quality and safety requirements,
recommendations and precautions as give in the guidelines issued by AEDB
d.
2) Compliance to Protection Requirements Para 9 of Regulations:
The protection and control diagrams for the interconnection of the DG Facility has been designed
in accordance with the provision of Grid and Distribution codes and approved by IESCO (name
of DISCO) prior to commissioning of proposed interconnection facilities. Reference has been
derived from typical single line diagram specified at Schedule VIII of the net metering regulations.
The distributed generator is provided with equipment including without limitation, electrical
lines/circuits, transformer, switch gear, safety and protective devices. Meters to be used for
interconnection shall be arranged in consultation with IESCO (DISCO name)
The protective functions are equipped with automatic means to prevent reconnection of
distributed generation facility with the distribution facilities of Distribution Company.
The distributed generator is equipped with a manual lockable disconnect switch that has a visual
break to isolate the distributed generator facility from distribution facilities.
The Grid connected generator complies with Underwriter laboratories UL1741 standards and
24 of 31
29-Jul-22
Azhar 12 14313 2432601
11 AEDB: Schedule
addresses the electrical interconnection design of various forms of generating equipment IEEE
1547 2003, IEC 61215. Compliance proof or Manufacturers certificate to this effect is attached.
The DG Facility is designed to free from interference generation. Proper shielding and earthing is
provided to avoid any such generation and suppression. The THD of the inverter used is -----2--
%-------
--(Value) which is less than permitted 3%.
11 AEDB: Schedule
25 of 31
29-Jul-22
11 AEDB: Schedule 7 Azhar Masih 12 14313 2432601 U
Whereas: -
2.1 The Customer has agreed to purchase Wind / Photovoltaic Distributed Generating (DG) system of
9900 KWp with 10 KW grid tie inverter amounting to PKR 2,260,500
2.2 The DG Installer is involved in the business of designing, supply and installation of Wind / PV
systems including after sale support
2.3 The Customer is desirous of installing Wind / Photovoltaic Distributed Generation Facility
(hereinafter referred to as “the DG Facility”) at the address of
26 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule
2.4 The DG Installer is registered with Alternative Energy Development Board (AEDB), listed under
the Directory of the Registered DG Installers with registration number C-R/20/041/ARE-V1 and is
listed at AEDB’s website at www.aedb.org
3.2 The Customer hereby appoints the DG Installer to Supply and Install the DG Facility at the Address
as stated in Clause 1 as per requirements of NEPRA (Alternative and Renewable Energy)
Distributed Generation and Net Metering Regulations, 2015 (‘Regulations’) (SRO S.R.O 812 ( 1
)/2015 dated 1st September 2015) as amended time to time. The DG Installer shall strictly comply
with the specifications and requirements as stated in the Regulations and standards for the
components of the DG Facility as given by AEDB on its website. Compliance certificate shall also
be rendered by DG Facility as per Fifth Schedule attached.
3.3 The DG Installer shall be responsible to initiate and get processed application of net metering
connection on behalf of the Customer from start till energization of the connection. DG Installer
shall ensure that the whole process for application for Net Metering connection must be completed
within 30 days of submission of application.
3.4 The Products and Components and services required for the DG Facility are as set out the quote
which has been agreed between the two parties and are set out in the First Schedule attached.
3.4 Any changes ( after signing this agreement ) to the brand of the products as set out in the First
Schedule have to be mutually agreed, in writing and made a part of this agreement, by both the
Customer and the DG Installer. Copy of the same has also to be provided to IESCO for update of its
records.
3.5 The DG Installer hereby agrees to provide the Customer the DG Facility performance expectancy as
set out in the Second Schedule, attached.
3.6 The Customer hereby agrees to pay the DG Installer for the products (including components) and
installation charges as set out in the Third Schedule.
3.7 All payments by the Customer to the DG Installer shall be in the form of cheque, bank draft
(cashier’s order) or electronic transfer. No payment in CASH, shall be made by the Customer to the
DG Installer. All payments must be acknowledged by official receipts issued by the DG Installer.
1
□This is mandatory for connections up to 250 kW capacity. For above 250 kW, it is up to the customer’s choice
Consumer Initial
Installer Initial
-2-
This is a legal document and cannot be tampered
with.
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule
3.8 The Customer and DG Installer hereby agree to abide and comply with all rules, regulations,
directives and any written requirement as set out by NEPRA / IESCO / AEDB / any other relevant
authority.
3.9 All documents in respect of NEPRA and IESCO for the DG Facility shall be executed by the
Customer. However, DG Installer shall provide services in completing the documentation and
processing for obtaining Net Metering Connection as per Regulations.
3.10 The Customer hereby agrees and covenants to allow the DG Installer, its employees and
person/persons authorized by the DG Installer to enter the address of the Customer for the purpose
of carrying out site survey prior to commencement of works, the supply and installation of the DG
Facility and any other related services and maintenance.
3.11 The DG Installer agrees to provide a warranty as set out Fourth schedule. Minimum warranties
required are as follows.
a. Warranty, PV Modules against manufacturing defects, 10 Years.
b. PV Modules, standard performance warranty, 25 Years
c. Workmanship including locally supplied parts (Except Frames) 5 Years.
d. PV mounting Frames and associated parts, 25 Years
e. Grid tie inverters, including hybrid, 5 years
3.12 The DG Installer shall be responsible to the Customer on any warranty claims on components and
equipment.
3.13 Both the Customer and the DG Installer hereby agree and covenant that they shall not, for the
duration of this Agreement executed between them, terminate this Agreement without the written
consent of the other party. Provided that written consent shall only be granted when the party that
intends to terminate the agreement has met all its obligations under this Agreement. The Customer
may terminate the agreement if the DG Installer fails to deliver satisfactory performance as per
agreed schedule. Similarly DG Installer may terminate this agreement if payment schedule is not
met.
3.14 The duration of this agreement shall start from the date of signing this Agreement and will continue
for the period mentioned in warranty clauses.
3.15 The Schedules attached to this Agreement shall form part and parcel of this Agreement and shall be
read as part of this Agreement.
3.16 Any date or period mentioned in this Agreement may with the written consent of the parties be
extended failing which time shall be of the essence of this Agreement.
3.17 The provisions of this Agreement shall be binding upon the personal representatives of each of the
parties being an individual.
3.18 Each party confirms that this Agreement sets out the entire agreement and understanding between
the parties and that it supersedes all prior agreement, arrangement and understanding between
them and that they are not entering into this Agreement or any arrangement contemplated or in
reliance upon any representation or warranty not expressly set out in this Agreement.
3.19 No failure or delay by any party in exercise of any right, power or privilege under this Agreement
shall operate as a waiver of it nor shall any single or partial exercise by such party of any right,
power or privilege preclude any further exercise of it or the exercise of any other right or privilege.
28 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule
Installer Initial Consumer Initial
This is a legal document and cannot be tampered with. -3-
28 of
29-Jul-
Azhar 12 14313 2432601
11 AEDB: Schedule
3.20 No party shall have the right to assign any of the rights, liabilities or benefits set out in this
Agreement without the prior written consent of the other party having been first obtained.
3.21 Each party shall bear its own costs, legal fees and other expenses. The stamp duty for this
Agreement, if any, shall be borne by the Customer.
3.22 No provision of this Agreement shall be amended, modified, varied, waived or discharged otherwise
than by the express written agreement of the parties to it nor may any breach of any provision of this
Agreement be waived or discharged except by the written consent the other party.
3.23 In the event of any conflict between the provisions of this Agreement and any other document, the
provision of this Agreement shall prevail.
3.24 All notices required to be given under this Agreement shall be in writing and shall be given or sent
to the party concerned by hand or by Registered Post at the address set out in this Agreement or at
such other address as the parties may so inform the other in writing.
3.25 This Agreement shall be deemed to be a contract made in Pakistan and shall be interpreted in all
respect in accordance with Laws of Pakistan.
IN WITNESS WHEREOF the parties hereto have hereunto set their hands the day and year first above
written.
Witness 1 Witness 2
CNIC CNIC
29 of
29-Jul-
Azhar 12 14313 2432601
13) Load Flow Study if DG Facility is greater than 500 KW. (On
PSSE Or FDRANA Up to 499kW & On only PSSE Above 499
kW )
Feroz Shaikh
Upper queens road, House # C-443/10-B Sukkur.
9900KW
NA
30 of
29-Jul-
Azhar 12 14313 2432601
Feroz Shaikh
Upper queens road, House # C-443/10-B Sukkur.
9900KW
NA
31 of 31
29-Jul-
Solar Energy, Electrical Hadron Solar (Pvt) Ltd 326-Johar Avenue New Campus Road Lahore AEDB – CR/20/041/ARE-V1
Service & Installation Contract Tel: 0315-4182493 License #
is hereby authorized by the Owner(s) of the premises mentioned below, hereinafter referred to as Buyer, to furnish all necessary
materials, labor and workmanship to install, construct and place the improvement according to the following description of work, including materials and equipment
to be used on the premises below described;
BUYERS INFORMATION
NAME HOME PHONE CELL/WORK PHONE
Feroz Shaikh 0092 300 838 0610
JOB ADDRESS EMAIL
Upper queens road, House # C-443/10-B Sukkur.
BILLING ADDRESS Province Postal Code
Upper queens road, House # C-443/10-B Sukkur.
ELECTRICAL UTILITY ACCOUNT NUMBER ELECTRIC METER NUMBER SANCTIONED LOAD ANNUAL KWH’S ANNUAL BILL (PKR) ROOF TYPE
10 38112 0493400 U 3-P 442578 7.5 2
Your Solar System includes all Modules/Panels, Inverters, Racking, Building Permits, Application and Processing for Rebates, Installation, Property
Analysis, City and State Approvals, Consultation with HOA, Sales Tax Connection to the Grid and all Labor at no additional charge.
SYSTEM INFORMATION
SYSTEM SIZE AC WATTS ANNUAL PRODUCTION ENERGY OFFSET EXPECTED
7560 31,400
SYSTEM PRICE (PKR) LOAN (PKR) OUT OF POCKET EXPENSE PKR NET SYSTEM COST PRICE PER WATT
2100000 105
Annual production, Energy Offset Annual Savings and Payback Period are estimates and may vary. Payback Period and Annual Savings based on future utility rate
increases. Buyer must pay Hadron Solar (Pvt) Ltd for the full System Price of this agreement, including any deficit between the actual and estimated rebates
and/or tax credits.
EQUIPMENT LIST SPECIAL INSTRUCTIONS
Panels 18 x JA CS6W-550MM
Inverter 01 x Growatt S5-GR3P10K
DC Silk Cables
Cable
AC Pakistan Cables
Cable
Frame GI with SS Nut Bolts
Earthing 2.5mm, 4mm, 16mm
AC 63 amp EXCLUSIONS
Breaker
AC 40 ka
Surge
DC r 32 amp
Breake
Disconnect
The schedule of progress payments must specifically describe each phase of work, including the type and amount of work or services scheduled to be supplied in
each phase, along with the amount of each proposed progress payment. BUYER’S INITIAL:
WARRANTY: years Solar Modules (per manufacturer), years inverter(s) (per manufacturer), years parts and labor. See reverse for details.
ARBITRATION OF DISPUTES. If any dispute shall arise between Contractor and Buyer regarding performance of the work, or payment of any alleged change in the
work, Contractor may not be forced to continue work until payment is received, if any dispute should arise it is agreed that Contractor and Buyer shall meet first to
review and negotiate in a peaceful manner all disputes per terms and conditions of contract. If the contractor performs to code and inspections are approved by the
inspectors. Buyer cannot withhold any payments or rebate. If the parties cannot resolve their dispute informally, the dispute shall be determined by binding
arbitration administered by an arbitrator chosen contractor, pursuant to its Comprehensive Arbitration Rules and Procedures or Streamlined Arbitration Rules and
Procedures (as determined pursuant to those rules according to the amount in controversy). Judgment on the Award may be entered in any court having
jurisdiction. The prevailing party of any arbitration shall be entitled to reasonable attorney’s fees, costs and expenses incurred.
NOTICE: BY INTIALING IN THE SPACE BELOW YOU ARE AGREEING TO HAVE ANY DISPUTE ARISING OUT OF THE MATTERS INCLUDED IN THE ARBITRATION OF
DISPUTE” PROVISION DECIDED BY NEUTRAL ARBITRATION AS PROVIDED BY PAKISTAN LAW AND YOU ARE GIVING UP ANY RIGHTS YOU MIGHT POSSESS TO HAVE
THE DISPUTE LITIGATED IN A COURT OR JURY TRIAL. BY INITIALING IN THE SPACE BELOW YOU ARE GIVING UPYOUR JUDICIAL RIGHTS TO DISCOVERY AND APPEAL,
UNLESS THOSE RIGHTS ARE SPECIFICALLY INCLUDED IN THE ‘ARBITRATION OF DISPUTE” PROVISION. IF YOU REFUSE TO SUBMIT TO ARBITRATION AFTER AGREEING
TO THIS PROVISION, YOU MAY BE COMPELLED TO ARBITRATE UNDER THE AUTHORITY OF THE BUSINESS AND PROFESSIONS CODE OR OTHER APPLICABLE LOCAL
LAWS. YOUR AGREEMENT TO THIS ARBITRATION PROVISION IS VOLUNTARY.
RIGHT TO CANCEL: You the Buyer, may not cancel this transaction any time after the signing of this transaction & before financing approval or otherwise.
BUYER’S INITIAL:
TERMS AND CONDITIONS: The terms and conditions on the reverse side of this contract are expressly incorporated into this contract; Buyer
understands that this document is an offer to contract for the services of Hadron Solar (Pvt) Ltd . Once approved and accepted by the Buyer and
the Contractor (in writing or by the commencement of work), this document shall become a valid and binding contract.
Proposal by: Ref.# Date: Accepted by: Date:
H adron Solar (Pvt) Ltd 02-May-23 02-May-23
Feroz Shaikh
Quotation good for 15 days.
29-Jul-
Your sign acknowledges you agree to the terms on both pages of this agreement.
Limited Warranty
Contractor provides Customers with complimentary, limited -year PV Modules only and 05 Years Inverters warranty in
combination by component manufacturers to protect Customers against defective workmanship, system or component
breakdown, that results in degradation in electrical output of more than fifteen percent from the originally rated output during the
ten year period. Contractor will not charge for parts and labor costs associated with these limited warranties.
Payback Analysis
The payback analysis (if any) in this report is based on the assumption that there is zero load shedding/rolling blackouts on the
client premises. The final electricity bill depends on the client usage and assumes that the client usage does not increase after the
installation of the Solar Electric System.
Specific to roof penetrating System installations, Contractor provides a limited repair warranty for affected area only for damages
to roof structure caused by Contractor during a System installation for areas within a (3) inch radius of any roof penetrations. The
period for this limited warranty the roof damages is only to the extent of the remaining period of any existing warranties at the
time of System installation provided by the contractor(s) who installed or built the roof.
Existing Conditions
Contractor is not responsible and bears no liability for the malfunctioning of existing electrical equipment at the site, including but
not limited to the main electrical service panel, any major electrical devices, or any other fuses or similar devices.
Unforeseen Conditions
Contractor is not responsible for delays or expenses related to unanticipated, unusual, or unforeseen conditions at the site,
including but not limited to inclement weather, roof condition and structure, subsurface conditions, underground or aboveground
water, gas, or severed pipes, electrical or cable lines or transformers, or any other physical or material hindrance to the installation
of the System. If the Contractor discovers unforeseen conditions requiring additional cost, Contractor shall present such costs to
Buyer and receive Buyer’s written approval before beginning or continuing installation.
Site Access
Buyer grants Contractor and any subcontractor’s full permission to enter the site during the duration of the System installation,
and to use reasonable work areas in order to complete the System installation. Buyer also grants Contractor permission to access
the site after the System’s completion, for the purposes of repair, inspection, monitoring, or update of the Project, or any of the
same with respect to the monitoring system.
Privacy/Publicity
Buyer grants Contractor full rights and permission to publicly use, display, share, and advertise the photographic images, System
details, price and any other non-personally identi1iing information of the Buyer’s System. Contractor shall not knowingly release
any personal data about Buyer or besides the above, any data associating Buyer with the System Site. The Buyer shall have the
right to opt-out of these publicity rights by communicating such wishes with the Contractor in writing.
Restocking Fee
This contract cannot be cancelled once physical work of installing the Solar PV system starts on the house. Due to certain
circumstances, the company in good faith might agree to cancel the contract before physical work starts on the job. In that case all
equipment as part of the install, will be subject to 20% restocking fee. The company will also charge for any work performed by the
company for that specific job.