|
|
Certificate of Compliance
Certificate Number: LR 4532-12
Revision: LR 45322-81 Date Issued: April 8, 1997
Issued To: DYNALCO CONTROLS
AUNIT OF MARK CONTROLS CORP.
3690 N.W. S3RD ST.
P.O. BOX 5328
FT. LAUDERDALE, FL 33310
USA
Attention: Mr. Rolly Ingles
The products listed below are eligible to bear the CSA Mark.
Issued By:
Signature Uo”
CLASS 2258 03 - PROCESS CONTROL EQUIPMENT - intrinsically Safe and Non-Incendive Systems - For
Hazardous Locations
PRODUCTS
Class 1, Groups A, B, C and D:
‘Supplementary Certification for Digital Tachometer SPD-100 to cover new Dynalco magnetic pick-ups Models M203
M204 and M205
CLASS 2258 02 - PROCESS CONTROL EQUIPMENT - For Hazardous Locations
Class 1, Groups A, B, C and D:
Magnetic Pick-up Assembly Model Nos. M104, M140, M180, M219, M280, M318, M319, M337 and M341, outpat rated
98V rms (270V. P-P) max, 0,05mA max.
9p 507 (Canadian Standards Associaton Offices: Montréal, Toronto, Edmonton, Vancouver, Tokyo, Hong KongCertificate No: LR 45322-12 r Date: April 8, 1997
Revision: LR 45322-81
Al "ABLE REQUIREMENT!
CSA Std C22.2.No. 30-M1986 - _ Explosion-Proof Enclosures for Use in Class | Hazardous Locations
CSA Std C222 No. 142-M1987.- Process Control Equipment
CANICSA-C22.2 No. 157-92 ~ _ Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous
/ Locations
MARKINGS
‘Magnetic Pick-Up Assemblies, Models M203, M204, M205 shall bear the following information:
: Submittor’s idemification
: Model designation
: CSA Monogram
Explosion Proof Magnetic Pick-Up Assemblies, Models M104, M140, M180, M219, M280, M318, M319, M337
and M341 shall bear the following information
Submittors identification
Model designation
Hazardous Location designation
CSA Monogram
Date Code or Serial Number
‘Canadian Standards Assocation Offices: Montréal Toronto, Edmonton, Vancouver, Tako, Hong Kong