Professional Documents
Culture Documents
No:
Question Paper
(OR)
(b) Derive the expression for a thermal model of motor for heating and cooling. Also
draw the heating and cooling curve.(13)
12. (a) Explain with a neat circuit diagram, the different types of braking of DC shunt motor.
Also Sketch the braking characteristics.(13)
(OR)
(b)Sketch the speed –torque characteristics of a three phase Induction motor and explain
its Motoring mode, generating mode and Braking mode of operation.(13)
(OR)
(b )(i)Draw and explain the Auto transformer starter.(8)
(ii) Find the starting torque of an Induction motor in terms of full load torque when
started by means of (a) Star delta starter (b) Auto transformer with 74.7% tapping.
The short circuit current of the motor at normal voltage is 5 times the full load
current and full load slip is 3%.(5)
14. (a) Explain the operation of single phase half and full converter fed separately excited DC
motor drives.(13)
(OR)
(b) Explain the speed control of a Chopper fed DC series motor drive with its neat circuit
diagram.(13)
15. (a) Explain the operation of different speed control techniques employed for 3 phase
squirrel cage Induction motor.(13)
(OR)
(b) Explain how the speed of slip ring Induction motor is controlled by feeding back its
slip power to the mains.(13)
16.(a)(i)Explain field and Armature control method of speed control for DC shunt
motor.(10)
(ii) A 500V DC Shunt motor running at 700 rpm takes an Armature current of 50A
effective Armature resistance is 0.4 ohm. What resistance must be placed in series
with the Armature to reduce the speed to 600 rpm. The torque remaining constant.(5)
(OR)
(b)Explain how v/f control of three phase induction motor is achieved using inverters.
(15)
********************************************************