Professional Documents
Culture Documents
Of Reference: QP 5-6
Prosthetics & Orthotics Version: 3
(DPO) Issued/Reviewed Date: 29-Jun-18
Intake: 2023
Result: ……..…/100 marks
Year:1 Semester:1
Mark: ………………. %
Course: Mechanics
https://docs.google.com/forms/d/e/1FAIpQLSfB2f4J4YeRNLChf3A3NO9HvML-QLhecokcQ_ALD-
gmAABBWQ/viewform?usp=share_link
This test will run for 1 hour and 40 minutes and will consist of
10 minutes reading time (strictly no writing) or go through with the lecturing team
1 hour and 30 minutes writing time
INSTRUCTIONS:
If you are found talking, looking at the work of others, or communicating in any other way, you will
be immediately removed from the exam, and will be given an automatic FAIL mark with 0%.
If you need anything or have any questions during the exam, raise your hand and the
Mobile telephones, electronic organizers, calculators, papers and any other devices that may contain
written material that could in any way assist your exam shall not be permitted in the exam room.
The marks given are displayed in the boxes next to the questions.
D: ISO 9001:2015\QMS Doc\Form\DPO\ Code: FR-Training-319 (Written Test front Page) Eng. doc
Department Code: FR-Training-319
Of Reference: QP 5-6
Prosthetics & Orthotics Version: 3
(DPO) Issued/Reviewed Date: 29-Jun-18
Two forces T and F are applied to a bracket as shown below The bracket is in equilibrium.
Take = 90o.
D: ISO 9001:2015\QMS Doc\Form\DPO\ Code: FR-Training-319 (Written Test front Page) Eng. doc
Department Code: FR-Training-319
Of Reference: QP 5-6
Prosthetics & Orthotics Version: 3
(DPO) Issued/Reviewed Date: 29-Jun-18
(A) 𝐹𝑥 = −𝐹. 𝑐𝑜𝑠37𝑜 , 𝐹𝑦 = −𝐹. 𝑠𝑖𝑛37𝑜 (B) 𝐹𝑥 = −𝐹. 𝑐𝑜𝑠37𝑜 , 𝐹𝑦 = −𝐹. 𝑠𝑖𝑛37𝑜
(C) 𝐹𝑥 = −𝐹. 𝑐𝑜𝑠37𝑜 , 𝐹𝑦 = −𝐹. 𝑠𝑖𝑛37𝑜 (D) 𝐹𝑥 = −𝐹. 𝑐𝑜𝑠37𝑜 , 𝐹𝑦 = −𝐹. 𝑠𝑖𝑛37𝑜
Determine the tensions developed in wires 𝐶𝐷, 𝐶𝐵 and 𝐴𝐵 and the angle 𝜃 required for equilibrium
of the 30-N cylinder E and the 60-N cylinder F.
D: ISO 9001:2015\QMS Doc\Form\DPO\ Code: FR-Training-319 (Written Test front Page) Eng. doc
Department Code: FR-Training-319
Of Reference: QP 5-6
Prosthetics & Orthotics Version: 3
(DPO) Issued/Reviewed Date: 29-Jun-18
Question 5
2. Determine the required magnitude of force F, if the resultant couple moment on the beam is to be zero.
(A) 𝐹 = 13,2 𝑘𝑁. 𝑚 (B) 𝐹 = 14,2 𝑘𝑁. 𝑚 (C) 𝐹 = 15,2 𝑘𝑁. 𝑚
Question 6
D: ISO 9001:2015\QMS Doc\Form\DPO\ Code: FR-Training-319 (Written Test front Page) Eng. doc