Professional Documents
Culture Documents
ID: NAME:
2. VDCS:
3. VCS:
4. FEA:
5. CAD⁄CAM:
Of 7 1 | P a g e
STUDENT
ID: NAME:
3. Feature-Based Modeling:
4. Over-defined constrained:
5. Synthetic curves:
Q Review Questions: Provide short answers to the following questions( only 8): 8
3 1. About CAD, which of the following two does this course teach: (1) a specific
technology or methodology of how to design an engine of a car, or (2) the
computer software tools and their underneath theories that help the designer in
designing the geometry and assembly of a product?
3. What are the major four steps in the design and manufacturing of a mechanical
product?
4. In the four steps that you answer in 3, which one uses CAD tool, which one uses
CAE tool, and which one uses CAM tool?
Of 7 2 | P a g e
STUDENT
ID: NAME:
7. In describing the shape of an object, what is the main reason for using the object’s
model coordinate system?
9. Explain why, in order to use a single matrix to represent the affine transformation,
a point must be represented by homogeneous coordinates [x y z 1] T, rather than the
conventional [x y z]T.
Of 7 3 | P a g e
STUDENT
ID: NAME:
2) for sketching on a face of a cubic, the global work plane is moved using:
a) Sketch on point b) Sketch on axis c) Sketch on plane d) move
4) the following command leaves the common volume of two intersecting parts
a) Cut b) Intersect c) add d) Extrude
b) Briefly Describe: 3
1) What are the major disadvantages of Hermite curve representation?
Of 7 4 | P a g e
STUDENT
ID: NAME:
Answer:
Of 7 5 | P a g e
STUDENT
ID: NAME:
Q Consider the Hermite curve defined in the plane with P(0) = (2, 3), P(1) = (4, 0), P’(0) = 8
3 (3, 2), and P’(1) = (3, -4). Find the curve equation.
:::::::Good luck:::::::::
Of 7 6 | P a g e