Professional Documents
Culture Documents
[ ]
20 10 5 10
σ = 10 −30 −15 MPa
5 −15 5
Determine the normal, shear, and resultant stresses on a plane through O whose normal
makes 65 o with the x-axis and 35o with the y-axis. Hint l 2 +m2+ n2=1
(b) 3.6-m wooden rectangular column has the dimensions
shown in Fig. P1-b. Determine the critical load if the
P1 ends are assumed to be pin-connected. E = 12 GPa.
Yielding does not occur.
10
(b) The following describes the stress distribution in a body (in megapascals): 10
[ ]
x 2 +2 y −xy 2 +1 xz −2 x 2 y
σ ij= −xy 2+1 xy − y 2 z 0 ( MPa )∧i , j=x , y , z
2 2 2
xz−2 x y 0 x −z
1 page of 2
SANAA UNIVERSITY Final Exam-3 hours
FACULTY OF ENGINEERING 1st Term- 3rd Year
MECHANICAL ENGINEERING DEPARTMENT 07 Jan. 2019
STRESS ANALYSIS
Determine the body force distribution required for equilibrium and the magnitude of its
resultant at the point x = –10 mm, y = 30 mm, z = 60 mm.
(a) The state of strain at point A on the bracket in Fig. P3–a1
is measured using the strain rosette shown in Fig. P3–a2.
The readings from the gages give ε a=60 ×10−6,
−6 −6
ε b=135 ×10 , and ε c =264 ×10 . Using Mohr’s circle to
determine the principal strains at the point and the
directions in which they act. 10
P3
,,,,,,,,GOODLUCK ,,,,,,,,,
07 January 2019
2 page of 2